Synthesis and molecular structures of heptafluoroisopropylated fullerenes: C60(i-C3F7)8, C60(i-C3F7)6, and C60(CF3)2(i-C3F7)2

One isomer of C₆₀(i-C₃F₇)₈, three isomers of C₆₀(i-C₃F₇)₆, and the first mixed perfluoroalkylated fullerene, C₆₀(CF₃)₂(i-C₃F₇)₂, have been isolated by HPLC from a mixture prepared by reaction of C₆₀ with heptafluoroisopropyl iodide in a glass ampoule at 260-290 °C. The molecular structures of the four new compounds have been determined by means of X-ray single crystal diffraction partially also by use of synchrotron radiation. Theoretical calculations at the DFT level of theory have been employed to rationalize the energetics of isomers and of C₆₀-R_f binding.     

Synthesis and molecular structures of heptafluoropropylated fullerenes: C70(n-C3F7)8, C70(n-C3F7)6O, and C70(C3F7)4

Ampoule reactions of C₇₀ with n- and i-C₃F₇I were carried out at 250-310 °C. Two step HPLC separations allowed the isolation of several C₇₀(n-C₃F₇)_4-8 and C₇₀(i-C₃F₇)₄ compounds. Crystal and molecular structures of C₇₀(n-C₃F₇)₈-V, C₇₀(n-C₃F₇)₆O, C₇₀(n-C₃F₇)₄, and three isomers of C₇₀(i-C₃F₇)₄ have been determined by X-ray crystallography using synchrotron radiation. Molecular structures of the new compounds were compared with the known examples and discussed in terms of addition patterns and relative energies of their formation.     

Novel method of synthesis of C60F48 with improved yield and selectivity

A novel two-stage method of preparation of C₆₀F₄₈ with 96% purity and 80% yield is reported. A C₆₀ embedded into a MnF₂ matrix is reacted with molecular fluorine under dynamic conditions, i.e. in flow of fluorine gas and with sublimation of volatile products, which results in formation of C₆₀F₃₄-C₆₀F₃₈ mixtures with >90% yield. Subsequent fluorination of the mixture thus obtained in the closed reactor at elevated pressure directly leads to the final product. C₆₀F₄₈ thus synthesized has been characterized by means of EI-MS, MALDI-MS, IR-spectroscopy and X-ray photoelectron spectroscopy (XPS). The problems of fullerene burning and degradation in the fluorine atmosphere are discussed.     

From hypervalent xenon difluoride and aryliodine(III) difluorides to onium salts: Scope and limitation of acidic fluoroorganic reagents in the synthesis of fluoroorgano xenon(II) and iodine(III) onium salts

Fluorinated organodifluoroboranes R_fBF₂ are in general suitable reagents to transform XeF₂ and RIF₂ into the corresponding onium tetrafluoroborate salts [R_fXe][BF₄] and [R(R_f)I][BF₄], respectively. (4-C₅F₄N)BF₂ and trans-CF₃CFCFBF₂ which represent boranes of high acidity form no Xe-C onium salts in reactions with XeF₂ but give the desired iodonium salts with RIF₂ (R = C₆F₅, o-, m-, p-C₆FH₄). The reaction of (4-C₅F₄N)BF₂ with XeF₂ ends with a XeF₂-borane adduct. C₆F₅Xe(4-C₅F₄N), the first Xe-(4-C₅F₄N) compound, was obtained when C₆F₅XeF was reacted with Cd(4-C₅F₄N)₂. We describe the synthesis of (4-C₅F₄N)IF₂ and reactions of (4-C₅F₄N)IF₂ and C₆F₅IF₂ with (4-C₅F₄N)BF₂. Analogous to [(4-C₅F₄N)₂I][BF₄] and [C₆F₅(4-C₅F₄N)I][BF₄] aryl(perfluoroalkenyl)iodonium salts [R(R′)I][BF₄] were obtained from RIF₂ (R = C₆F₅, o-, m-, p-C₆FH₄) and R′BF₂ (R′ = trans-CF₃CFCF, CF₂CF). The gas phase fluoride affinities pF⁻ of selected fluoroorganodifluoroboranes R_fBF₂ and their hydrocarbon analogs are calculated (B3LYP/6-31+G^*) and discussed with respect to their potential to introduce R_f-groups into hypervalent EF₂ bonds. Four aspects which influence the transformation of hypervalent EF₂ bonds (E = Xe, R′I) under the action of Lewis acidic reagents RAF_n−1 (A = B, P; n = 3, 5) into the corresponding [RE][AF_n+1] salts are presented and the important role of the acidity is emphasized. Fluoride affinities may help to plan the introduction of organo groups into EF₂ moieties and to expand the types of acidic reagents. Thus C₆H₅PF₄ with a pF⁻ value comparable to that of R_fBF₂ compounds is able to introduce the C₆H₅ group into RIF₂ (R = C₆F₅, p-C₆FH₄).     

Reactions of chlorofullerene C60Cl6 with N-substituted piperazines

It was shown for the first time that reactions of C₆₀ halides with aliphatic amines provide a facile route for the synthesis of aminofullerenes, valuable precursors for water-soluble cationic fullerene derivatives. Particularly, chlorofullerene C₆₀Cl₆ and N-substituted piperazines were investigated in this work. It was shown that substitution of chlorine atoms in C₆₀Cl₆ by amine groups is accompanied by partial elimination of addends from the fullerene cage that yields mixtures of di-, tetra- and, hexaaminofullerenes as the final products. Separation of these mixtures by column chromatography resulted in isolation of pure 1,4-diaminofullerenes; this procedure gives much higher and more reproducible yields of these compounds than direct oxidative photoaddition of secondary amines to C₆₀. ESI mass spectrometry and NMR spectroscopy data showed that hexaaminofullerene isomers are major components in inseparable mixtures of polyaddition products. Polyaminofullerenes were found to be readily soluble in aqueous acids; these solutions are unstable because of a facile substitution of protonated amine groups with hydroxyls. Nevertheless, the use of other amine substrates in the investigated reaction can potentially allow the preparation of more stable water-soluble cationic fullerene derivatives for biological studies.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

A new structure type of phosphate: Crystal structure of Na2Zn5(PO4)4

A new compound, Na₂Zn₅(PO₄)₄, was identified in the system ZnONa₂OP₂O₅ and high-quality crystal was obtained by the melt method. The crystal structure of this compound was solved by direct method from single crystal X-ray diffraction data. The structure was then refined anisotropically using a full-matrix least square refinement on F² and the refinement converged to R₁=0.0233 and wR₂=0.0544. This compound crystallizes in the orthorhombic system with space group Pbcn, lattice parameters a=10.381(2) Å, b=8.507(1) Å, c=16.568(3) Å and Z=4. The structure is made up of 3D [Zn₅P₄O₁₆]_n²ⁿ⁻ covalent framework consisting of [Zn₄P₄O₁₆]_n⁴ⁿ⁻ layers. The powder diffraction pattern of Na₉Zn₂₁(PO₄)₁₇ is explained by simulating a theoretical pattern with NaZnPO₄ and Na₂Zn₅(PO₄)₄ in the molar ratio of 1:4 and then by Rietveld refinement of experimental pattern. Na₂Zn₅(PO₄)₄ melts congruently at 855 °C and its conductivity is 5.63×10⁻⁹ S/cm.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Thermodynamics of 2D polymerized tetragonal phase of fullerene C60 in the range from T→0 to 650 K at standard pressure

By dynamic calorimetry the temperature dependence of heat capacity for two-dimensional (2D) polymerized tetragonal phase of C₆₀ has been determined over the 300-650 K range at standard pressure mainly with an uncertainty ±1.5%. In the range 490-550 K, an irreversible endothermic transition of the phase, caused by the depolymerization of the polymer, has been found and characterized. Based on the experimental data obtained and literature information, the thermodynamic functions of 2D polymerized tetragonal phase of C₆₀, namely, the heat capacity C°_p(T), enthalpy H°(T)−H°(0), entropy S°(T), and Gibbs function G°(T)−H°(0), have been calculated over the range from T→0 to 490 K. From 150 to 330 K in an adiabatic vacuum calorimeter and between 330 and 650 K in a dynamic calorimeter the thermodynamic properties of the depolymerization products have been examined and compared with the corresponding data for the monomeric phase C₆₀.     

Selective formation of C60F18(g) and C60F36(g) by reaction of [60]fullerene with molecular fluorine

Fluorination of C₆₀(s), C₆₀(s)-MnF₂(s), C₆₀(s)-NiF₂(s) and C₆₀(s)-MnF₃(s) mixtures has been studied by Knudsen cell mass spectrometry with admission of molecular fluorine. The fluorination is selective when fullerene reacts with the fluorine chemisorbed on the MnF₂ surface. When the MnF₂ content in the initial mixture is at least 90 mol% both C₆₀F₁₈ and C₆₀F₃₆ are selectively formed. Under certain conditions, mixtures predominantly containing one of three compounds C₆₀F₃₈, C₆₀F₄₀, and C₆₀F₄₂ can be obtained. A consecutive change of the main fluorination products (C₆₀F₁₈ and C₆₀F₃₆) takes place at constant temperature (720 K) and on fluorine admission. A quantitative explanation of this fact is given. Selective fluorination of C₆₀(s) by molecular fluorine is compared with solid-phase fluorination using MnF₃(s) as a fluorinating agent.     

Synthesis, structural investigation, and theoretical study of pentaf luoroethyl derivatives of [60]fullerene

Pentafluoroethyl derivatives of [60]fullerene C₆₀(C₂F₅)_n (n = 6, 8, and 10) were synthesized by the reaction of C₆₀ with C₂F₅I in glass ampoules at 380–440 °C. Isomers of composition C₆₀(C₂F₅)₆ (one isomer), C₆₀(C₂F₅)₈ (five isomers), and C₆₀(C₂F₅)10 (two isomers) were isolated by chromatographic separation. Their molecular structures were established by X-ray diffraction. The relative stabilities of isomers were compared by density functional theory calculations. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 881–887, May, 2007.     

双亲性C60衍生物水相聚集行为

富勒烯C₆₀几乎不溶于水中,从而阻碍了对富勒烯的进一步研究和潜在应用。双亲性C₆₀衍生物在水相中自组装形成聚集体,在水相具有一定的溶解度,其特殊的结构及性能引起了科学家的广泛关注。本文对双亲性C₆₀衍生物在水相中聚集行为的研究现状及研究进展进行了详细系统的介绍。本文第一部分主要阐述了双亲性C₆₀衍生物的结构,根据修饰到C₆₀表面的功能基类型对双亲性C₆₀衍生物进行了分类。第二部分主要阐述了双亲性C₆₀衍生物在水相的聚集行为以及pH值、溶剂极性、浓度、温度和抗衡离子等因素对聚集行为的影响。     

Electronic structure of the complexes of fullerene C60 with polyaromatic molecules

Electronic structure of the complexes of fullerene C₆₀ with triphenylene (TP) and 9,10-diphenylantracene (DPA) has been studied by an X-ray fluorescent spectroscopy. The C Kα spectrum of a complex was shown to be almost an additive sum of the C Kα spectra measured for fullerene and organic ligand. The quantum-chemical calculation of a DPA·C₆₀ structural unit using density functional theory (DFT) revealed a slight charge transfer from DPA molecule to the C₆₀ cage. The intermolecular interaction in the complex was found to proceed through quit energy deep molecular orbitals.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Investigation of fullerene C60 effect on properties of polymethylmethacrylate exposed to ionizing radiation

Effect of fullerene C₆₀ was investigated on thermal, mechanical and optical properties of polymethylmethacrylate (PMMA) under ionizing radiation. It was stated that fullerene C₆₀ behaves as an effective antirad with respect to PMMA. Fullerene C₆₀ addition raises temperature of destruction for polymer subjected to electron radiation by 20-25 °C, lowers the rate from 4 to 4.5 times and increases the activation barrier for radiated PMMA destruction reaction. Fullerene C₆₀ addition promotes improvement of strength properties of PMMA: for films containing C₆₀ addition and else subjected to electron radiation treatment a decrease in rupture strength is 10-15%, for samples containing no fullerene it equals ∼25%. Interaction of free radicals with fullerene at radiation treatment influences optical characteristics of PMMA films.     

Isolation of C60(CF3)n (n = 2, 4, 6, 8, 10) with high compositional purity

The high temperature reaction of C₆₀ with silver(I) trifluoroacetate followed by 500 °C sublimation and subsequent HPLC purification has led to the isolation of the five trifluoromethyl[60]fullerenes C₆₀(CF₃)_n (n=2, 4, 6, 8, 10). Four of them have >90% compositional purity. Two of the compounds, C₆₀(CF₃)₄ and C₆₀(CF₃)₆, were obtained as C₁-symmetry isomers with >90% isomeric purity, and a sample of C₆₀(CF₃)₂ also contained ca. 15-20% of a C_s-symmetry isomer of C₆₀(CF₃)₄. The new compounds were characterized by IR and EI mass spectrometry (all five compounds), NMR spectroscopy (C₆₀(CF₃)₂, C₆₀(CF₃)₄, and C₆₀(CF₃)₆), and 2D COSY NMR spectroscopy (C₆₀(CF₃)₄ and C₆₀(CF₃)₆). Calculations at the AM1 and DFT levels of theory have led to the prediction of the most likely structures for C₆₀(CF₃)₂, C₁-C₆₀(CF₃)₄, C_s-C₆₀(CF₃)₄, and the two most likely structures of C₁-C₆₀(CF₃)₆.     

Synthesis and structural characterization of a new aluminum oxycarbonitride, Al5(O, C, N)4

A new aluminum oxycarbonitride, Al₅(O_xC_yN_4−x−y) (x∼1.4 and y∼2.1), has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and electron energy loss spectroscopy (EELS). The title compound was found to be hexagonal with space group P6₃/mmc, Z=2, and unit-cell dimensions a=0.328455(6) nm, c=2.15998(3) nm and V=0.201805(6) nm³. The atom ratios O:C:N were determined by EELS. The final structural model, which is isomorphous with that of (Al_4.4Si_0.6)(O_1.0C_3.0), showed the positional disordering of one of the three types of Al sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R_wp=6.94% (S=1.22), R_p=5.34%, R_B=1.35% and R_F=0.76%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al₅C₃N (space group P6₃mc, Z=2).     

Reactions of fullerene C60 with organometallic azides

Reactions of fullerene C₆₀ with organometallic azides [Et₂AlN₃, EtAl(N₃)₂ and Bu₃SnN₃] led to novel 1-azido-2-alkylfullerenes. The structures of the products were confirmed by IR, ¹Н and ¹³C NMR spectroscopy and MALDI TOF mass spectrometry.