Twist versus Linkage Mode: Which One is Better for the Construction of Blue Luminogens with AIE Properties?

Two new blue luminogens, Py‐4MethylTPE and Py‐4mTPE, constructed with a pyrene core and tetraphenylethene peripheries, have been successfully obtained. These two luminogens show AIE and AEE effects, respectively, as a result of minor differences in their structures. An OLED device based on Py‐4mTPE exhibits a good performance (η_C,max=4.02 cd A^?1, λ_EL,max=436 nm) and reveals the powerful effect of a different linkage mode for the construction of blue AIE luminogens.     

Construction of deep-blue AIE luminogens with TPE and oxadiazole units

In this paper, two AIE-active luminogens (Oxa-pTPE and Oxa-mTPE) constructed from tetraphenylethene and oxadiazole units were successfully synthesized and their thermal, optical and electronic properties were investigated. By linking TPE to the oxadiazole core through meta-or para-position, the intramolecular conjugation is effectively controlled. Thanks to the intelligent molecular design and specific AIE feature, when fabricated as emissive layers in non-doped OLEDs, they exhibit blue or deep-blue emission with CIE coordinates of (0.17, 0.23) and (0.15, 0.12), and good efficiencies with ηC, max and ηP, max up to 1.52 cd A-1 and 0.84 Im W-1 , shedding some light on the construction of deep-blue AIE fluorophores.     

Simple Bipolar Hosts with High Glass Transition Temperatures Based on 1,8‐Disubstituted Carbazole for Efficient Blue and Green Electrophosphorescent Devices with “Ideal” Turn‐on Voltage

Two hybrids based on 1,8‐disubstituted carbazole, 1,8‐OXDCz and 1,8‐mBICz , have been designed and synthesized through a facile process. The incorporation of oxadiazole or N‐phenylbenzimidazole moieties at the 1,8‐positions of carbazole greatly improves its morphological stability, giving glass transition temperatures (T_g) as high as 138 and 154 °C, respectively. Blue phosphorescent organic light‐emitting devices (PhOLEDs) with 1,8‐mBICz exhibit almost the same performance as a similarly structured device based on the mCP host, and green PhOLEDs employing the new host material 1,8‐OXDCz exhibit an ideal turn‐on voltage (2.5 V at 1.58 cd m^?2), a maximum current efficiency (η_c,max) of 73.9 cd A^?1, and a power efficiency (η_p,max) of 89.7 lm W^?1. These results are among the best performances of [Ir(ppy)₃]‐based devices with simple device configurations.     

Aggregation‐Induced Delayed Fluorescence Luminogens for Efficient Organic Light‐Emitting Diodes

Aggregation‐induced delayed fluorescence (AIDF) can be regarded as a special case of aggregation‐induced emission (AIE). Luminogens with AIDF can simultaneously emit strongly in solid state and fully utilize the singlet and triplet excitons in organic light‐emitting diodes (OLEDs). In this work, two new AIDF luminogens, DMF‐BP‐DMAC and DPF‐BP‐DMAC, with an asymmetric D–A–D′ structure, are designed and synthesized. The characteristics of both luminogens are systematically investigated, including single crystal structures, theoretical calculations, photophysical properties and thermal stabilities. Inspired by their AIDF nature, the green‐emission non‐doped OLEDs based on them are fabricated, which afford good electroluminescence performances, with low turn‐on voltages of 2.8 V, high luminance of 52560 cd m^?2, high efficiencies of up to 14.4 %, 42.3 cd A^?1 and 30.2 lm W^?1, and very small efficiency roll‐off. The results strongly indicate the bright future of non‐doped OLEDs on the basis of robust AIDF luminogens.     

The Control of Conjugation Lengths and Steric Hindrance to Modulate Aggregation‐Induced Emission with High Electroluminescence Properties and Interesting Optical Properties

A series of novel AIE‐active (aggregation‐induced emission) molecules, named SAF‐2‐TriPE, SAF‐3‐TriPE, and SAF‐4‐TriPE, were designed and synthesized through facile reaction procedures. We found that incorporation of the spiro‐acridine‐fluorene (SAF) group, which is famous for its excellent hole‐transporting ability and rigid structure, at different substitution positions on the phenyl ring affected the conjugation lengths of these compounds. Consequently, we have obtained molecules with different emission colors and properties without sacrificing good EL (electroluminescence) characteristics. Accordingly, a device that was based on compound SAF‐2‐TriPE displayed superior EL characteristics: it emitted green light with η_{c, max}=10.5 cd A^?1 and η_{ext, max}=4.22 %, whereas a device that was based on compound SAF‐3‐TriPE emitted blue‐green light with η_{c, max}=3.9 cd A^?1 and η_{ext, max}= 1.71 %. These compounds also displayed different AIE performances: when the fraction of water in the THF solutions of these compounds was increased, we observed a significant improvement in the Φ_F of compounds SAF‐2‐TriPE and SAF‐3‐TriPE; in contrast, compound SAF‐4‐TriPE showed an abnormal phenomenon, in that it emitted a strong fluorescence in both pure THF solution and in the aggregated state without a significant change in Φ_F. Overall, this systematic study confirmed a relationship between the regioisomerism of the luminophore structure and its AIE activity and the resulting electroluminescent performance in non‐doped devices.     

Synthesis and characterization of new blue‐light‐emitting polymers based on PPP and PPV having fluorene pendant at vinyl bridge

The new poly(arylene vinylene) derivatives, which are composed of biphenylene vinylene phenylene vinylene, biphenylene vinylene m‐phenylene vinylene, terphenylene vinylene phenylene vinylene, and terphenylene vinylene m‐phenylene vinylene as backbone and bulky fluorene pendants at each vinyl bridge, were designed, synthesized, and characterized. The obtained polymers showed weight‐average molecular weights of 11,100–39,800 with polydispersity indexes ranging from 1.5 to 2.1. The resulting polymers were amorphous with high thermal stability and readily soluble in common organic solvents. The obtained polymers showed blue emission (λ_max = 456–475 nm) in PL spectra, and polymer 4 containing terphenylene vinylene m‐phenylene vinylene showed the most blue shifted blue emission (λ_max = 456 nm). The double layer light‐emitting diode devices fabricated by using obtained polymers as emitter emitted bright blue light. The device showed turn on voltage around 6.5 V and brightness of 70–250 cd/m². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4923–4931, 2006     

Solution‐processed high‐performance orange phosphorescent and white PLEDs with a high color‐rendering index from an unprecedented π‐stacked and π‐conjugated host material

A blue fluorescent polymer based on poly(vinyl carbazole) (PVK) and terfluorene, combined to make a chemical hybrid at the carbazole unit (PVK‐TF), is fully characterized in this study. PVK‐TF shows useful emission features, such as peaks at 400, 420, 437, 460, and 496 nm, depending on the processing conditions. It possesses a relatively high triplet energy level (2.23 eV), electrochemical stability, good film‐forming ability, and morphological stability. Based on this blue fluorescent material, highly efficient orange phosphorescent polymer light‐emitting diodes (PLEDs) were fabricated with a maximum efficiency of 21.99 cd A^?1, and a maximum luminance of 19552.3 cd m^?2. Single‐layer hybrid white PLEDs were developed, with a high color rendering index of 81.9 that emitted across the whole visible spectrum from 380 to 780 nm, corresponding to the Commission International de L'Eclairage coordinates x, y values of around (0.38, 0.40) and CCT = 3774, with a maximum current efficiency of 10.69 cd A^?1, and a maximum brightness of 15723.3 cd m^?2. © 2014 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 587–595     

Robust Tris‐Cyclometalated Iridium(III) Phosphors with Ligands for Effective Charge Carrier Injection/Transport: Synthesis,Redox, Photophysical,and Electrophosphorescent Behavior

With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light‐emitting diodes (PHOLEDs), a series of bluish–green to yellow–green phosphorescent tris‐cyclometalated homoleptic iridium(III) complexes [Ir(ppy‐X)₃] (X=SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph, Hppy=2‐phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods. By chemically manipulating the lowest triplet‐state character of Ir(ppy)₃ with some functional main‐group 14–16 moieties on the phenyl ring of ppy, a new family of metallophosphors with high‐emission quantum yields, short triplet‐state lifetimes, and good hole‐injection/hole‐transporting or electron‐injection/electron‐transporting properties can be obtained. Remarkably, all of these Ir^III complexes show outstanding electrophosphorescent performance in multilayer doped devices that surpass that of the state‐of‐the‐art green‐emitting dopant Ir(ppy)₃. The devices described herein can reach the maximum external quantum efficiency (η_ext) of 12.3 %, luminance efficiency (η_L) of 50.8 cd A^?1, power efficiency (η_p) of 36.9 Lm W^?1 for [Ir(ppy‐SiPh₃)₃], 13.9 %, 60.8 cd A^?1, 49.1 Lm W^?1 for [Ir(ppy‐NPh₂)₃], and 10.1 %, 37.6 cd A^?1, 26.1 Lm W^?1 for [Ir(ppy‐SO₂Ph)₃]. These results provide a completely new and effective strategy for carrier injection into the electrophosphor to afford high‐performance PHOLEDs suitable for various display applications.     

Photophysical Properties and OLED Applications of Phosphorescent Platinum(II) Schiff Base Complexes

The syntheses, crystal structures, and detailed investigations of the photophysical properties of phosphorescent platinum(II) Schiff base complexes are presented. All of these complexes exhibit intense absorption bands with λ_max in the range 417–546 nm, which are assigned to states of metal‐to‐ligand charge‐transfer (¹MLCT) ¹[Pt(5d)→π*(Schiff base)] character mixed with ¹[lone pair(phenoxide)→π*(imine)] charge‐transfer character. The platinum(II) Schiff base complexes are thermally stable, with decomposition temperatures up to 495 °C, and show emission λ_max at 541–649 nm in acetonitrile, with emission quantum yields up to 0.27. Measurements of the emission decay times in the temperature range from 130 to 1.5 K give total zero‐field splitting parameters of the emitting triplet state of 14–28 cm^?1. High‐performance yellow to red organic light‐emitting devices (OLEDs) using these platinum(II) Schiff base complexes have been fabricated with the best efficiency up to 31 cd A^?1 and a device lifetime up to 77 000 h at 500 cd m^?2.     

Deep‐blue light‐emitting polyfluorenes with asymmetrical naphthylthio‐fluorene as Chromophores

A novel blue polycyclic aromatic compound 2,8‐dibromo‐14,14‐dioctyl‐14H‐benzo[b]benzo [5,6] fluoreno[1,2‐d]thiophene 9,9‐dioxide (Br₂NFSO) is designed and synthesized through multistep synthesis, and its structure is confirmed by nuclear magnetic resonance. Based on synthesized polycyclic aromatic compound Br₂NFSO, a series of twisted blue light‐emitting polyfluorenes derivatives (PNFSOs) are prepared by one‐pot Suzuki polycondensation. Based on the twisted polymer molecular structure resulted from the asymmetric links of 14,14‐dioctyl‐14H‐benzo[b]benzo[5,6]fluoreno[1,2‐d]thiophene 9,9‐dioxide (NFSO) unit in copolymers and better electron transport ability of NFSO than those of the electron‐deficient dibenzothiophene‐S,S‐dioxide counterpart, the resulting polymers exhibit excellent electroluminescent spectra stability in the current densities from 100 to 800 mA cm^?2, and show blue‐shifted and narrowed electroluminescent spectra with the Commission Internationale de L′Eclairage (CIE) of (0.16, 0.07) for PNFSO5, compared to poly(9,9‐dioctylfluorene) (PFO) with the CIE of (0.18, 0.18). Moreover, the superior device performance is achieved based on PNFSO5 with the maximum luminous efficiency (LE_max) of 1.96 cd A^?1, compared with the LE_max of 0.49 cd A^?1 for PFO. The results indicate that the twisted polycyclic aromatic structure design strategy has a great potential to tuning blue emission spectrum and improving EL efficiency of blue light‐emitting polyfluorenes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 171–182     

Deep‐blue light‐emitting polyfluorenes containing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers

Blue light‐emitting polyfluorenes, PPF‐FSOs and PPF‐SOFs were synthesized via introducing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers (2,7‐diyl and 2′,7′‐diyl) (FSO/SOF) into the poly[9,9‐bis(4‐(2‐ethylhexyloxy) phenyl)fluorene‐2,7‐diyl] (PPF) backbone, respectively. With the increasing contents of FSO and SOF moieties, the absorption and PL spectra of PPF‐FSOs show slight red shift, while that of PPF‐SOFs exhibit blue shift, respectively. The HOMO and LUMO levels reduce gradually with increasing SOF unit in PPF‐SOFs. The polymers emit blue light peaked around 430–445 nm and show an excellent spectral stability with the variation in current densities. The distinctly narrowing EL spectra were observed with the incorporation of isomers in the polymers. The full width at half maximum reduced by 15 nm for PPF‐SOFs, resulting in a blue shift with the CIE coordinates from (0.16, 0.11) to (0.16, 0.08). With a device configuration of ITO/PEDOT:PSS/EML/CsF/Al, a maximum luminance efficiency (LE_max) of 2.00 cd A^?1, a maximum external quantum efficiency (EQE_max) of 3.76% with the CIE coordinates of (0.16, 0.08) for PPF‐SOF15 and a LE_max of 1.68 cd A^?1, a EQE_max of 2.38% with CIE (0.16, 0.12) for PPF‐FSO10 were obtained, respectively. The result reveals that spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers are promising blocks for deep‐blue light‐emitting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2332–2341     

A Novel trans‐1‐(9‐Anthryl)‐2‐phenylethene Derivative Containing a Phenanthroimidazole Unit for Application in Organic Light‐Emitting Diodes

Aryl‐substituted phenanthroimidazoles (PIs) have attracted tremendous attention in the field of organic light‐emitting diodes (OLEDs), because they are simple to synthesize and have excellent thermal properties, high photoluminescence quantum yields (PLQYs), and bipolar properties. Herein, a novel blue–green emitting material, (E)‐2‐{4′‐[2‐(anthracen‐9‐yl)vinyl]‐[1,1′‐biphenyl]‐4‐yl}‐1‐phenyl‐1H‐phenanthro[9,10‐d]imidazole (APE‐PPI), containing a t‐APE [1‐(9‐anthryl)‐2‐phenylethene] core and a PI moiety was designed and synthesized. Owing to the PI skeleton, APE‐PPI possesses high thermal stability and a high PLQY, and the compound exhibits bipolar transporting characteristics, which were identified by single‐carrier devices. Nondoped blue–green OLEDs with APE‐PPI as the emitting layer show emission at λ=508 nm, a full width at half maximum of 82 nm, a maximum brightness of 9042 cd m^?2, a maximum current efficiency of 2.14 cd A^?1, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.26, 0.55). Furthermore, a white OLED (WOLED) was fabricated by employing APE‐PPI as the blue–green emitting layer and 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7‐tetramethyljulolidin‐4‐yl‐vinyl)‐4H‐pyran (DCJTB) doped in tris‐(8‐hydroxyquinolinato)aluminum (Alq₃) as the red–green emitting layer. This WOLED exhibited a maximum brightness of 10029 cd m^?2, a maximum current efficiency of 16.05 cd A^?1, CIE coordinates of (0.47, 0.47), and a color rendering index (CRI) of 85. The high performance of APE‐PPI‐based devices suggests that the t‐APE and PI combination can potentially be used to synthesize efficient electroluminescent materials for WOLEDs.     

Synthesis and optoelectronic properties of alternating benzofuran/terfluorene copolymer with stable blue emission

The solution processable alternating benzofuran/terfluorene copolymer bearing side oxadiazole groups ( PBF‐OXD ) was synthesized and its optoelectronic properties and color stability were investigated. Electron‐deficient and stereohindered oxadiazole units were used as pendent groups to compensate for the poor electron‐transporting ability of a p‐type polymer backbone, to depress the intermolecular π‐stacking, and to improve solubility while retaining polymer blue emission. PBF‐OXD showed a glass transition at 135 °C and an onset decomposition temperature of ～345 °C. A simple EL device, with the configuration of ITO/PEDOT:PSS/ PBF‐OXD /Ba/Al, displayed a stable blue emission (λ_max = 434 nm), good color purity (full width half‐maximum = 59 nm), maximum brightness of 1400 cd/m², and a maximum luminance efficiency of 0.95 cd/A. The PL and EL spectra changed slightly on annealing and on increasing the applied voltage. These results show that the as‐synthesized copolymer PBF‐OXD had integrated respective functions of its different building blocks and exhibited good thermal and color stability with improved EL performance. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5488–5497, 2009     

New ladder‐type conjugated polymer containing carbazole and fluorene units in backbone: Synthesis,optical, and electrochemistry properties

This article describes the synthesis and characterization of a new ladder‐type poly (p‐phenylene) (LPFC) containing alkylcarbazole and dialkylfluorene units in backbone, and its optical and electrochemical properties as well as its light‐emitting device performance. LPFC shows the well‐defined structure, high molecular weights, excellent thermal stability, and good solubility in common organic solvents. And it also shows strongly blue emission (λ_max = 465 nm) with quantum efficiency of 70% in solution, while its solid emission (λ_max = 470 nm) is almost the same as its solution. Electrochemical studies show that the highest occupied molecular orbital (HOMO) energy levels of LPFC is up to 5.29 eV, which is significantly higher than that of LPPP without carbazole in backbone, indicating an enhanced ability of hole injection from anodes. Furthermore, the single layer light‐emitting device using LPFC as the active layer shows blue emission (λ_max = 470 nm) with maximum luminescence of ～ 2000 cd/m² and maximum luminance efficiency of 0.43 cd/A. The attractive properties exhibited from new ladder‐type polymer establish LPFC as a good candidate for the potential application as transporting and emitting layer in polymeric light emitting diodes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3120–3127, 2008     

Silicon‐Based Material with Spiro‐Annulated Fluorene/Triphenylamine as Host and Exciton‐Blocking Layer for Blue Electrophosphorescent Devices

A novel silicon‐based compound, 10‐phenyl‐2′‐(triphenylsilyl)‐10H‐spiro[acridine‐9,9′‐fluorene] (SSTF), with spiro structure has been designed, synthesized, and characterized. Its thermal, electronic absorption, and photoluminescence properties were studied. Its energy levels make it suitable as a host material or exciton‐blocking material in blue phosphorescent organic light‐emitting diodes (PhOLEDs). Accordingly, blue‐emitting devices with iridium(III) bis[(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) as phosphorescent dopant have been fabricated and show high efficiency with low roll‐off. In particular, 44.0 cd A^?1 (41.3 lm W^?1) at 100 cd m^?2 and 41.9 cd A^?1 (32.9 lm W^?1) at 1000 cd m^?2 were achieved when SSTF was used as host material; 28.1 lm W^?1 at 100 cd m^?2 and 20.6 lm W^?1 at 1000 cd m^?2 were achieved when SSTF was used as exciton‐blocking layer. All of the results are superior to those of the reference devices and show the potential applicability and versatility of SSTF in blue PhOLEDs.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Carbazolevinylene‐based polymers and model compounds with oxadiazole and triphenylamine segments: Synthesis,photophysics, and electroluminescence

Two new soluble alternating carbazolevinylene‐based polymers POXD and PTPA as well as the corresponding model compounds MOXD and MTPA were synthesized by Heck coupling. POXD and MOXD contained 2,5‐diphenyloxadiazole segments, while PTPA and MTPA contained triphenylamine segments. All samples displayed high thermal stability. The polymers had higher glass transition temperature (T_g) than their corresponding model compounds. The samples showed absorption maximum at 364–403 nm with optical band gap of 2.62–2.82 eV. They emitted blue‐green light with photoluminescence (PL) emission maximum at 450–501 nm and PL quantum yields in THF solution of 0.15–0.36. The absorption and the PL emission maxima of PTPA and MTPA were blue‐shifted as compared to those of POXD and MOXD . The electroluminescence (EL) spectra of multilayered devices made using four materials exhibited bluish green emissions, which is well consistent with PL spectra. The EL devices made using poly(vinyl carbazole) doped with MOXD and MTPA as emitting materials showed luminances of 12.1 and 4.8 cd m^?2. POXD and PTPA exhibited 25.4, and 96.3 cd m^?2, respectively. The polymer containing the corresponding molecules in the repeating group showed much higher device performances. Additionally, POXD and MOXD exhibited better stability of external quantum efficiency (EQE) and luminous efficiency with current density resulting from enhancing the electron transporting properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5592–5603, 2008     

Effect of the Counterion on Light Emission: A Displacement Strategy to Change the Emission Behaviour from Aggregation‐Caused Quenching to Aggregation‐Induced Emission and to Construct Sensitive Fluorescent Sensors for Hg2+ Detection

In this paper, a simple strategy to change the emission behaviour of luminogenic materials was developed. Tetraphenylethene (TPE)‐functionalised benzothiazolium salts with different counteranions (TPEBe?X; X=I^?, ClO₄^? and PF₆^?) were designed and synthesised. All the luminogens show weak red emission in the solution state that originates from intramolecular charge transfer from TPE to the benzothiazolium unit. Whereas aggregate formation enhances the light emission of TPEBe?ClO₄ and TPEBe?PF₆, that of TPEBe?I is quenched, thus demonstrating the phenomena of aggregation‐induced emission and aggregation‐caused quenching. TPEBe?I works as a light‐up fluorescent sensor for Hg²⁺ in aqueous solution with high sensitivity and specificity owing to the elimination of the emission quenching effect of the iodide ion by the formation of HgI₂ as well as the induction in aggregate formation by the complexation of Hg²⁺ with the S atom of the benzothiazolium unit of TPEBe?I. A solid film of TPEBe?I was prepared that can monitor the level of Hg²⁺ in aqueous solution with a detection limit of 1 μM .     

Highly Efficient Orange and Warm White Phosphorescent OLEDs Based on a Host Material with a Carbazole–Fluorenyl Hybrid

A new carbazole–fluorenyl hybrid compound, 3,3′(2,7‐di(naphthaline‐2‐yl)‐9H‐fluorene‐9,9‐diyl)bis(9‐phenyl‐9H‐carbazole) (NFBC) was synthesized and characterized. The compound exhibits blue‐violet emission both in solution and in film, with peaks centered at 404 and 420 nm. In addition to the application as a blue emitter, NFBC is demonstrated to be a good host for phosphorescent dopants. By doping Ir(2‐phq)₃ in NFBC, a highly efficient orange organic light‐emitting diode (OLED) with a maximum efficiency of 32 cd A^?1 (26.5 Lm W^?1) was obtained. Unlike most phosphorescent OLEDs, the device prepared in our study shows little efficiency roll‐off at high brightness and maintains current efficiencies of 31.9 and 26.8 cd A^?1 at a luminance of 1000 and 10 000 cd m^?2, respectively. By using NFBC simultaneously as a blue fluorescence emitter and as a host for a phosphorescent dopant, a warm white OLED with a maximum efficiency of 22.9 Lm W^?1 (21.9 cd A^?1) was also obtained.     

White‐Light Electroluminescence with Tetraphenylethylene as Emitting Layer of Aggregation‐Induced Emissions Enhancement

Tetraphenylethylene (TPE) based molecules with easy synthesis, good thermal stability, and especially their aggregation‐induced emissions enhancement (AIEE) effect recently become attractive organic emitting materials due to their potentially practical application in OLEDs. Herein, the AIEE behaviors of tetraphenylethylene dyes (TMTPE and TBTPE) were investigated. Fabricated luminesent device using TMTPE dye as emitting layer displays two strong emitting bands: the blue emission coming from the first‐step aggregation and the yellow emission attributed to the second‐step aggregation. Thus, it can be utilized to fabricate the white‐light OLEDs (WOLEDs) of the single‐emitting‐component. A three‐layer device with the brightness of 1200 cd·m^?2 and current ef?ciency of 0.78 cd·A^?1 emits the close to white light with the CIE coordinates of x=0.333 andy=0.358, when applied voltage from 8–13 V, verifying that the TPE‐based dyes of AIEE effect can be effectively applied in single‐emitting‐component WOLEDs fabrication.