Application of thermal analysis to the study of antituberculosis drugs–excipient compatibility

First-line drugs (rifampicin, RIF; isoniazid, INH; ethambutol, ETA; and pyrazinamide, PZA) recommended in conventional treatment of tuberculosis were analyzed in 1:1 w/w binary mixtures with microcrystalline cellulose MC 101 (CEL) and lactose supertab^® (LAC) by differential scanning calorimetry (DSC), thermogravimetry (TG), differential thermal analysis (DTA), and Fourier transformed infrared analysis (FTIR) as part of development of fixed dose combination (FDC) tablets. Evidence of interaction between drug and pharmaceutical excipients was supposed when peaks disappearance or shifting were observed on DTA and DSC curves, as well as decreasing of decomposition temperature onset and TG profiles, comparing to pure species data submitted to the same conditions. LAC was showed to interact with RIF (absence of drug fusion and recrystallization events on DSC/DTA curves); INH (thermal events of the mixtures different from those observed for drug and excipient pure in DSC/DTA curves); PZA (decrease on drug fusion peak in DSC/DTA curves), and ETA (shift on drug onset fusion and absence of pure LAC events on DSC/DTA curves). In all cases, an important decrease on the temperature of drug decomposition was verified for the mixtures (TG analysis). However, FTIR analysis showed good correlation between theoretical and experimental drug-LAC spectra except for INH–LAC mixture, evidencing high incompatibility between these two species and suggesting that those interactions with PZA and RIF were thermally induced. No evidence of incompatibilities in CEL mixtures was observed to any of the four-studied drugs.     

Physicochemical characterization of dipeptidyl peptidase-4 inhibitor alogliptin in physical mixtures with excipients

Alogliptin (ALG) is a hypoglycemic drug used in diabetes which inhibits the enzyme dipeptidyl peptidase-4 (DPP-4), preventing the degradation of incretins, stimulating insulin secretion. The physicochemical characteristics of ALG were evaluated by differential scanning calorimetry (DSC), thermogravimetry (TG) and scanning electron microscopy equipped with energy-dispersive X-ray spectrometer (SEM/EDS). The compatibility studies were carried out between ALG and excipients (physical mixtures, 1:1) using DSC, TG, diffuse reflectance Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRPD) and hot-stage microscopy. ALG presented purity near to 99%, melted in the range of 179.4–187.2 °C, followed by decomposition which started in 198.0 °C. SEM/EMS analysis of ALG presented irregular crystals and traces of impurities as copper and lead. DSC investigations obtained by physical mixtures showed minor alterations in the melting ranges of ALG with mannitol, magnesium stearate and commercial tablets. Solubilization of ALG in the fused excipient was observed by hot-stage microscopy between mannitol and ALG, and in tablets. The interaction observed in the mixture with magnesium stearate is due to the melting of the excipient and drug separately, first the excipient and then the drug. FTIR showed additional bands related to the excipients. XRPD proved that ALG has a crystal form and no alterations in the ALG profile were observed after the mixtures. ALG was compatible with all excipients tested. These results were important to understand the characteristics, stability and compatibility of the drug, and proved to be useful in preformulation studies.

     

Comparison of Generic Hydrochlorothiazide Formulations by Means of TG and DSC Coupled to a Photovisual System

The compatibilities and stabilities of some binary mixtures and generic hydrochlorothiazide formulations were studied by using TG, DSC and a DSC-photovisual system. The kinetic parameters were determined via the Arrhenius equations. Tablet B presented higher compatibility and thermal stability than those of tablets A and C. The photovisual system demonstrated that the decomposition of tablet A occurs before the melting point, due to the Maillard reaction between the hydrochlorothiazide and lactose present in the formulation. The behaviour and rate constants of binary mixtures suggest that lactose can be substituted for microcrystalline cellulose, MC(101), in tablet A. The DSC and TG data revealed different characteristics of compatibility and stability in generic formulations from different manufacturers. This revised version was published online in July 2006 with corrections to the Cover Date.     

Application of thermal analysis in study of binary mixtures with metformin

Thermal analysis is an essential analytical tool in development of new formulations as well as to study the interaction between drugs and excipients. This work aims to investigate the possible interactions between metformin and excipients as microcrystalline cellulose (Microcel MC101®), starch sodium glycolate (Explosol®), sodium croscarmellose (Explosel®), PVP K30, magnesium stearate, starch and lactose, usually employed in pharmaceutical products. TG, DSC and DTA techniques were used for the thermal characterization to track if the thermal properties of the drug substance were modified in the mixture. Disregard of the starch and lactose systems, no changes in thermal behavior of mixtures were found. Thermogravimetric studies (TG) of metformin and its binary mixtures showed different thermal behavior.     

Investigation of thermal behavior of Heliotropium indicum L. lyophilized extract by TG and DSC

Thermogravimetric (TG) techniques and differential scanning calorimetry (DSC) used for the study of pre-formulation or drug–adjuvant compatibility have been gaining importance in Brazil. These techniques are being used for the verification of possible interactions between drugs and adjuvants. Aiming at studying the behavior of a plant extract and its mixture with adjuvants, using these thermoanalytical techniques the plant species Heliotropium indicum L. was used. This plant which is originally from India and has been well acclimatized in Brazil has healing and anti-inflammatory properties. The methodology for obtaining the extract followed the Brazilian Pharmacopoeia methodology. And the incorporation of the extract with adjuvants was through binary mixtures (1:1 w/w). The TG and DSC curves were obtained under nitrogen atmosphere (25 mL min^?1) at a heating rate of 5 °C min^?1; TG tests were analyzed within a temperature range from 25 to 600 °C and DSC from 25 to 300 °C. The TG curves show good thermal stability of the extract and its mixtures with adjuvants up to 150 °C, except the propylene glycol (PLG). The DSC curves revealed an incompatibility of the extract with methylparaben and PLG mixture.     

Thermal stability of metronidazole drug and tablets

TG and DSC data were used to determine the thermal parameters of metronidazole drug and tablets. Three tablets A, B and C were analysed. The TG curves of metronidazole drug and tablets A and B displayed five and C four thermal decomposition processes, respectively. Analysis of the DSC data pointed to chemical interactions between metronidazole drug and the excipients of tablets, suggested by alterations in the melting point of metronidazole. The rate constants obtained from the isothermal TG data presents following sequence of the thermal stability: tablet A>tablet C>metronidazole drug>tablet B. This revised version was published online in July 2006 with corrections to the Cover Date.     

Study of stability and drug-excipient compatibility of diethylcarbamazine citrate

Diethylcarbamazine citrate (DEC) is the main drug used in the lymphatic filariasis treatment. This study aimed to evaluate drug-excipient compatibility of binary mixtures (BMs) (1:1, w/w), initially by differential scanning calorimetry (DSC), and subsequently, if there were any interaction evidence, by complementary techniques, such as thermogravimetric (TG), non-isothermal kinetics, Fourier transform infrared (FT-IR), and X-ray diffraction (XRD). For the analyses of the BMs by DSC, we selected those with Tabletose^®, representing the excipients containing lactose, polivinilpirrolidona (PVP), and magnesium stearate (MgS). The additional analyses by FT-IR and XRD showed no interaction evidence. The TG curves of DEC–Tabletose^® showed no signs of interaction, unlike the TG curves of PVP and MgS, confirming the results of non-isothermal kinetics, in which the BMs with PVP and MgS decreased the reaction activation energy. Thus, it was concluded after evaluation that the excipients, especially the PVP and MgS, should be avoided.     

Preparation and investigation on tetradecanol and myristic acid/cellulose form-stable phase change material

In this paper, a novel form-stable phase change material (FS PCM) was prepared by incorporating the eutectic mixture of tetradecanol (TD) and myristic acid (MA) into the hydroxylpropyl methyl cellulose (HPMC). HPMC is used as support material, and the eutectic mixture is used as phase change material. The Fourier-transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD) and scanning electron microscopy (SEM) were used to study the chemical structure, crystallization behavior and morphology of the FS PCM, respectively. FT-IR, XRD and SEM showed that the TD–MA was distributed uniformly in HPMC by physical interaction. Specific surface area (BET) and pore size analysis determined the pore characteristics of the composite, and the results showed the porosity of HPMC. The thermal properties, thermal stability and thermal reliability were detected by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), thermal cycling test and leakage test. The TG, DSC and leakage analysis results revealed that the absorption of eutectic mixture into HPMC is nearly 50% and without seepage from the composite. The peak temperatures of melting and solidifying were 34.61 and 31.09 °C, and latent heat was 102.11/84.58 J g^?1 by DSC. TG and cycling experiment detected that the FS PCM showed good thermal stability and reliability performance.     

Thermal analysis and compatibility studies of prednicarbate with excipients used in semi solid pharmaceutical form

Differential Scanning Calorimetry (DSC), thermogravimetry/derivative thermogravimetry (TG/DTG) and infrared spectroscopy (IR) techniques were used to investigate the compatibility between prednicarbate and several excipients commonly used in semi solid pharmaceutical form. The thermoanalytical studies of 1:1 (m/m) drug/excipient physical mixtures showed that the beginning of the first thermal decomposition stage of the prednicarbate (T _onset value) was decreased in the presence of stearyl alcohol and glyceryl stearate compared to the drug alone. For the binary mixture of drug/sodium pirrolidone carboxilate the first thermal decomposition stage was not changed, however the DTG peak temperature (T _{peak DTG}) decreased. The comparison of the IR spectra of the drug, the physical mixtures and of the thermally treated samples confirmed the thermal decomposition of prednicarbate. By the comparison of the thermal profiles of 1:1 prednicarbate:excipients mixtures (methylparaben, propylparaben, carbomer 940, acrylate crosspolymer, lactic acid, light liquid paraffin, isopropyl palmitate, myristyl lactate and cetyl alcohol) no interaction was observed.     

Thermal characterization of antimicrobial drug ornidazole and its compatibility in a solid pharmaceutical product

The ornidazole drug substance presents melt at approximately 90 °C (∆T = 85–98 °C), which is critical for its use on pharmaceutical manufacturing process. This work aimed the thermal characterization of ornidazole raw-material synthesized by three different manufacturers from India, China, and Italy, using the thermoanalytical techniques of DTA, DSC, and TG, besides the verification of its stability and compatibility as a solid pharmaceutical product by the analysis of its binary mixtures (BM) with excipients and a tablet formulation. The characterization includes the thermal decomposition kinetic investigation by Ozawa model using Arrhenius equation and drug purity determination by Van’t Hoff equation. The DSC purity determination and precision were compared with results from UV–Vis spectrophotometric and liquid chromatography, showing an adequate correlation before being recommended as a general method for purity assay. The drug raw-materials presented similar quality and zero-order kinetic behavior, besides showing differences on thermal stability. The drug presented compatibility with the tested excipients since the BM studied presented melting at the same temperature range as the drug and a decomposition temperature similar to the drug for two of the BM, and at a higher temperature for the others three of the BM evaluated, which presented excipients with higher molecular structure, capable of spatial coating on the small drug molecule promoting a physical interaction pharmaceutical acceptable. The tablet was processed by wet granulation and compressed under normal conditions of pressure and temperature, maintaining the physical properties of solid drug approving the manufacturing process used. In this study, the thermal analysis was used with success as an alternative method to characterize, quantify, and perform a preformulation study.     

Relationship between properties of fluorinated graphite intercalates and matrix composition Part III. Intercalates with 1,2-dichloroethane

A series of PA-TD mixtures were prepared and their thermal properties were studied by DSC and thermal conductivity measurement. The phase diagram of the binary system was constructed, which showed an eutectic behavior for the solid-liquid equilibrium line. The eutectic composition of the binary system was at the mass fraction of TD near 0.7 with an eutectic temperature of about 29°C. At TD side, PA was partially miscible in the TD solid matrix and the solid phase transition of TD had an effect on the solidus line. The eutectic composition mixture could be viewed as a new phase change material with large thermal energy storage capacity.     

Thermal studies of isoniazid and mixtures with rifampicin

Rifampicin–Isoniazid mixture is a frequently used product in the treatment of tuberculosis. Rifampicin exhibits polymorphism and exists in two polymorphic forms: the stable form I and the metastable form II. The aim of this work was to evaluate the thermal behavior of the binary mixtures of polymorphs I and II of rifampicin and isoniazid by using DSC. Mixtures of different forms (rifampicin form I and II) showed interaction with isoniazid indicating that the mixtures are less stable compared to the drug alone. Interaction was observed in case of both polymorphs of rifampicin.     

Optical microscopy, DSC and X-ray diffraction studies in binary mixtures of 4-pentyloxy-4'-cyanobiphenyl with three 4,4'-di(alkoxy)azoxybenzenes

A large number of binary mixtures of 4-pentyloxy-4'-cyanobiphenyl (5OCB) and 4,4'-di(alkoxy)azoxybenzenes (nOAB) with n = 5, 6 and 7 have been studied by optical microscopy, DSC and X-ray diffraction methods. Over a wide concentration range the smectic A (SmA) phase is induced and the nematic (N) phase of the parent compounds is absent. Instead of the tilted smectic C phase of 7OAB an orthogonal SmA phase is observed when only 12% of the host molecules are replaced by 5OCB molecules. Moreover, in some mixtures the thermal stability of the induced SmA phase is found to be more than 1.6 times the stability of the mesophses in the pure compounds. The N-isotropic or Sm-I transition temperatures slowly increases with increasing concentrations, reaching a maximum at x _5OCB = 0.50 and then falling quite rapidly. In all the mixtures the enthalpy changes at the N-I transitions follow the simple additivity rule. In no mixture, except mixture C2, could the SmA-N transition be detected by DSC, although in all the mixtures the ratio T _NA/T _NI is found to be more than 0.95, which is in contradiction to McMillan's theory. Average intermolecular distances are found to have a minimum value near the equimolar concentration. From the concentration dependence of the smectic layer spacings it also appears that in all the mixtures the smectic A_d phase evolves from the smectic A₁ phase with increasing concentrations.     

Compatibility study between indomethacin and excipients in their physical mixtures

Thermal analysis is a routine method for analysis of drugs and substances of pharmaceutical interest. Thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) are thermoanalytical methods which offer important information about the physical and chemical properties of drugs (purity, stability, phase transition, polymorphism, compatibility, kinetic analysis, etc.). This work exemplifies a general method of studying the drug-excipient interactions with the aim of predicting rapidly and inexpensively the long thermal stability of their mixtures. The TG/DTG and DSC were used as screening techniques for assessing the compatibility between indomethacin (IND) and its physical associations as binary mixtures with some common excipients. Based on their frequent use in preformulations eleven different excipients: corn starch, microcrystalline cellulose (PH 101; PH 102), colloidal silicon dioxide, lactose (monohydrate and anhydre), polyvinilpyrrolidone K30, magnesium stearate, talc, stearic acid, and manitol were blended with IND. The samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). In order to investigate the possible interactions between the components, the thermal curves of IND and each selected excipient were compared with those of their 1:1 (w/w) physical mixtures. FT-IR spectroscopy and X-ray powder diffraction were used as complementary techniques to adequately implement and assist in interpretation of thermal results. On the basis of thermal results, confirmed by FT-IR and X-ray analyses, a possible interaction was found between IND with polyvinylpyrrolidone K30, magnesium stearate, and stearic acid.     

Paracetamol-propyphenazone interaction and formulation difficulties associated with eutectic formation in combination solid dosage forms

Polymorphic behaviours of paracetamol and propyphenazone and interaction between these two compounds were investigated using differential scanning calorimetry (DSC), X-ray powder diffraction and Fourier transform-infrared (FT-IR)-spectroscopy. Binary mixtures containing various ratios of the compounds were prepared as physical and fused mixtures and analysed by DSC to study their thermal behaviours. Phase diagrams obtained from the melting endotherms of the binary mixtures demonstrated formation of an eutectic mixture at a paracetamol-propyphenazone combination of about 35:65 (w/w) with an eutectic temperature of 56 degrees C. The FT-IR spectroscopy revealed no chemical interaction due to eutectic formation, and a lower degree of crystallinity of the eutectic mixture than individual substances was observed by X-ray powder diffraction analysis. The DSC and X-ray powder diffraction data demonstrated a polymorphic change in propyphenazone as a result of melting of the compound. Tablets, containing both paracetamol and propyphenazone in a combination formulation and prepared using standard wet granulation technology, were found to have physical instability when packed in either polyvinylchloride// aluminium or polyvinylchloride/polyvinyldienechloride// aluminium blisters and stored for one month at 40 degrees C with either 75% relative humidity or without any humidity control. The instability of the tablets was more apparent under the high humidity condition.     

Confined crystallization of binary n-alkane mixtures: stabilization of a new rotator phase by enhanced surface freezing and weakened intermolecular interactions

The present work reports the confined crystallization behaviours of binary even-even normal alkane (n-alkane) mixtures of n-octadecane (n-C(18)H(38)) and n-eicosane (n-C(20)H(42)), which are microencapsulated in monodisperse microcapsules, using the combination of differential scanning calorimetry (DSC) and temperature-dependent X-ray diffraction (XRD). A new metastable rotator phase (RII) absent in the bulk state, has been detected for the n-alkane mixture in confined geometry under all the investigated compositions. Such a crossover is attributed to the lower interfacial energy due to the same in-planar hexagonal structure of the surface monolayer and RII, as well as the weakened intermolecular interaction in alkane mixtures. This is the first time that RII is found in such a binary even-even n-alkane mixture that neither of the components contains RII phase in the crystallization process. Furthermore, based on the variation of alkane molecule conformation and in-planar structure with temperature, the correlations between the phase transition temperature and composition have been discussed.     

Thermal Behavior of Paracetamol-Polymeric Excipients Mixtures

The thermal behavior of binary mixtures of paracetamol and a polymeric excipient (microcrystalline cellulose, hydroxypropylmethylcellulose and cross-linked poly(vinylpyrrolidone)) was investigated. The physical mixtures, ranging from 50 to 90% by mass of drug, were submitted to a heating-cooling-heating program in the 35–180°C temperature range. Solid-state analysis was performed by means of differential scanning calorimetry (DSC), hot stage microscopy (HSM), micro-Fourier transformed infrared spectroscopy (MFTIR), and scanning electron microscopy (SEM). The polymeric excipients were found to address in a reproducible manner the recrystallization of molten paracetamol within the binary mixture into Form II or Form III. The degree of crystallinity of paracetamol in the binary mixtures, evaluated from fusion enthalpies during the first and second heating scans, was influenced by the composition of the mixture, the nature of the excipient and the thermal history. In particular, DSC on mixtures with cross-linked poly(vinylpyrrolidone) and hydroxypropylmethylcellulose with drug contents below 65 and75%, respectively, evidenced the presence only of amorphous paracetamol after the cooling phase. Microcrystalline cellulose was very effective in directing the recrystallization of molten paracetamol as Form II. This revised version was published online in August 2006 with corrections to the Cover Date.     

Compatibility study between sitagliptin and pharmaceutical excipients used in solid dosage forms

Differential scanning calorimetry (DSC) is a primary technique for measuring the thermal properties of materials, which reflects the physico-chemical properties of drug substances. In the present study, it is used as a screening technique for assessing the compatibility of sitagliptin with some currently employed pharmaceutical excipients. The influence of processing conditions and their effects (simple blending, co-grinding or kneading) on drug stability was evaluated. Sitagliptin showed a sharp endothermic peak at 212.1 °C with an enthalpy change of 131.5 J g^?1 indicating melting of drug. Facile transformation of dehydrated sitagliptin to monohydrate form was observed in some mixtures, disappearance of sharp melting endothermic peak of sitagliptin was observed in some mixtures. On the basis of DSC results, sitagliptin was found to be compatible with micro crystalline cellulose, croscarmellose, and pregelatinized starch. Some excipient interaction was observed with magnesium stearate, ascorbic acid, and citric acid. X-ray diffractometry and FT-IR were used as supportive tools in interpreting the DSC results. Overall, the excipients selected were compatible with the API and the mixtures are stable within the tested conditions. These results would be useful for formulation development of the film coated tablets of sitaglitptin.     

Thermal decomposition kinetics and compatibility studies of primaquine under isothermal and non-isothermal conditions

Primaquine (PQ) is the drug of choice for the radical cure of Plasmodium vivax malaria, and currently being administered in solid dosage form. In this study, the compatibility studies were carried out using differential scanning calorimetry (DSC), thermogravimetry (TG), and fourier transformed infrared (FT-IR). Non-isothermal and isothermal methods were employed to investigate kinetic parameters under nitrogen and air atmospheres using TG. The DSC investigations obtained by physical mixtures showed slight alterations in the melting temperatures of PQ with some excipients. The FT-IR confirmed the possible interactions obtained by DSC for the physical mixtures with PQ and lactose, magnesium stearate and mannitol. The results showed that the thermal decomposition followed a zero order kinetic in both atmospheres in non-isothermal method. The activation energy in both methods using nitrogen atmosphere was similar, and in air atmosphere the activation energy decreased.     

Compatibility study between chlorpropamide and excipients in their physical mixtures

Chlorpropamide ((4-chloro-N-(propylamino)-carbonyl)-benzenesulfonamide) belongs to compounds having sulfonylurea group and is widely used as an oral antidiabetic agent. In this work differential scanning calorimetry (DSC) was used during pre-formulation of chlorpropamide tablets to determine the drug-excipients compatibility. The DSC curves of chlorpropamide and binary mixtures with excipients (sodium croscarmellose, sodium lauryl sulfate, microcrystalline cellulose, magnesium stearate and calcium carbonate) showed that chlorpropamide exhibited interaction with magnesium stearate and sodium lauryl sulfate. The binary mixtures of chlorpropamide–magnesium stearate presented a single endothermic process at 96–108 °C and chlorpropamide–sodium lauryl sulfate showed a wide endotherm at 99–120 °C.