Scattering of pulsed Rayleigh surface waves by a cylindrical cavity

A pulsed Rayleigh surface wave of prescribed shape is incident on a cylindrical cavity which is parallel to both the plane free surface and the plane wave front. Multiple reflections at the cylindrical and plane free surface are considered and the resulting displacements and stress components are calculated in the surrounding of the cavity by approximately summing infinite double sums. Use is made of the stationary loading case simulated by a periodic train of wave pulses and its time Fourier series representation and of expansions of all incident and reflected waves in terms of cylindrical wave functions. For reflection, the free surface of the half-space is approximated by a fictitious convex (or concave) cylindrical surface of “large” radius. The wave pattern due to a single pulse loading is constructed from the stationary solution by enforcing homogeneous initial conditions in the half-space ahead of the single loading pulse and by prescribing a wide spacing in the periodically set-forth train of pulses. The numerical results for stresses and dynamic stress magnification factors are especially useful for the interpretation of recent measurements in dynamic photoelasticity.     

圆柱壳稳定性问题的研究进展

圆柱壳是工程实际中广泛应用的结构,其主要破坏形式是屈曲失稳．作为力学领域的经典问题,圆柱壳稳定性问题的研究非常之多．其中,受均匀轴向压力的圆柱壳由于临界屈曲载荷的理论预测值与早期试验结果之间的巨大差异,更是推动了壳体稳定性理论的不断发展．本文简要回顾了壳体稳定性理论的发展和分类,并对轴压圆柱壳体试验结果分散且远低于理论预测值的原因及含缺陷圆柱壳体的稳定性研究方法进行了总结,然后综述了地下空间顶管、储油罐、加筋圆柱壳及脱层圆柱壳等实际工程中广泛应用的圆柱壳结构稳定性研究的现状和趋势,最后展望了将来对工程应用中圆柱壳结构的稳定性研究的难点和方向．     

Vibration analysis of bi-layered FGM cylindrical shells

In the present study, a vibration frequency analysis of a bi-layered cylindrical shell composed of two independent functionally graded layers is presented. The thickness of the shell layers is assumed to be equal and constant. Material properties of the constituents of bi-layered functionally graded cylindrical shell are assumed to vary smoothly and continuously through the thickness of the layers of the shell and are controlled by volume fraction power law distribution. The expressions for strain–displacement and curvature–displacement relationships are utilized from Love’s first approximation linear thin shell theory. The versatile Rayleigh–Ritz approach is employed to formulate the frequency equations in the form of eigenvalue problem. Influence of material distribution in the two functionally graded layers of the cylindrical shells is investigated on shell natural frequencies for various shell parameters with simply supported end conditions. To check the validity, accuracy and efficiency of the present methodology, results obtained are compared with those available in the literature.     

Free vibration analysis of a hung clamped-free cylindrical shell partially submerged in fluid

The free flexural vibration of a hung clamped-free cylindrical shell partially submerged in a fluid is investigated. The fluid is assumed to be inviscid and irrotational. The cylindrical shell is modelled by using the Rayleigh-Ritz method based on Sanders’ shell theory. The kinetic energy of the fluid is derived by solving the boundary-value problem related to the fluid motion. The natural vibration characteristics of the partially submerged cylindrical shell are discussed with respect to the added virtual mass approach. In this study, the nondimensionalized added virtual mass incremental factor for the partially submerged finite shell is derived. This factor can be readily used to estimate the change in the natural frequency of the shell due to the presence of a fluid.     

Semi-infinite medium with a cylindrical inclusion twisted by an annular die

The problem considered is that of torsion of an elastic half-space consisting of two materials which are separated by a cylindrical surface. It is assumed that there is perfect bonding at the common cylindrical surface. The torque is applied to the half-space through an annular rigid disc which is bonded to both materials. By use of integral transforms and the theory of dual integral equations the problem is reduced to that of solving a pair of simultaneous Fredholm integral equations of the second kind. These simultaneous integral equations are solved numerically. The numerical results obtained are exhibited graphically.Research for this paper was partially supported by the Natural Sciences and Engineering Research Council of Canada through NSERC Grant No. A4177.     

Analysis for the thermoelastic bending of a functionally graded material cylindrical shell

An analytic study for thermoelastic bending of a functionally graded material (FGM) cylindrical shell subjected to a uniform transverse mechanical load and non-uniform thermal loads is presented. Based on the classical linear shell theory, the equations with the radial deflection and horizontal displacement are derived out. An arbitrary material property of the FGM cylindrical shell is assumed to vary through the thickness of the cylindrical shell, and exact solution of the problem is obtained by using an analytic method. For the FGM cylindrical shell with fixed and simply supported boundary conditions, the effects of mechanical load, thermal load and the power law exponent on the deformation of the FGM cylindrical shell are analyzed and discussed.     

Effects of the curvature radius of a cylindrical shell on the stress intensity factors of surface cracks

The effects of the curvature radius of a cylindrical shell on stress intensity factors are investigated in circumferential (inner and outer) semielliptical surface cracks in a cylindrical shell. What is new in this paper is to have given: (1) The stress intensity factors for surface cracks in a cylindircal shell are determined by photoelastic technique. (2) By a special method photoelastic slices are handled for obtaining a clear caustic curve, and the stress intensity factors for surface cracks in a cylindrical shell are determined by the caustic method. (3) An approximate equation of curvature correction factor F_c is proposed. (4) Effects of the curvature radius R of a cylindrical shell on the stress intensity factors of surface cracks are obtained. The results of this paper are in fair agreement with already existing analytical results. The approximate equation of curvature correction factor F_c can be widely used for engineering purposes.     

单层偏心圆柱薄壳的自由振动特性分析研究

本文从偏心圆柱壳截面的几何特性出发,将偏心圆柱壳问题转化为一个周向变厚度圆柱壳问题,随后利用其状态向量之间的传递矩阵将壳体的振动控制方程转化为矩阵微分方程形式,通过Magnus级数法求解传递矩阵得到频率方程。采用Lagrange插值法得到偏心圆柱壳体自由振动状态下的固有频率,并且与圆柱壳的固有频率进行了比较。对影响结构固有频率的主要参数进行了分析,得到了这些参数和固有频率之间的关系。本文不仅提出了一种有效求解偏心圆柱壳固有频率的新方法,同时亦可为检测偏心圆柱壳的偏心距提供一种新的思路和方法。     

Analysis of a cylindrical shell with spiral groove

Summary The analytical method is presented for a cylindrical shell with spiral groove. The governing equations of cylindrical shell derived by one of the authors are introduced and Kirchhoff's boundary conditions along any smooth path are deduced from the principle of energy. The analysis is carried out for a cylindrical shell under a uniform bending moment by considering the equilibrium conditions of a shell element. Numerical results are given for various geometrical parameters of cylindrical shell and the angle of the spiral groove, some of which are confirmed by an experiment.

---

übersicht Die analytische Methode wird für eine Kreiszylinderschale mit spiraler Fuge entwickelt. Die von einem der Verfasser eingeführten Differentialgleichungen der Kreiszylinderschale und die Kirchhoffschen Randbedingungen l?ngs des beliebig geneigten Randes, die vom Prinzip der Energie hergeleitet wurden, werden angegeben. Das Problem der Kreiszylinderschale mit spiraler Fuge unter einem uniformen Biegemoment wird unter Berücksichtigung der komplizierten Gleichgewichtsbedingungen der Schalenelemente analysiert. Die numerischen Ergebnisse zeigen gute übereinstimmung mit experimentellen Ergebnissen.

     

高速碰撞下圆柱壳自由梁的穿孔特性

利用二级轻气炮加载,进行了球状2A12铝弹丸垂直撞击圆柱壳自由梁实验。并进行了弹丸速度、圆柱壳直径和壁厚等因素对穿孔直径影响的数值模拟,数值模拟结果和实验结果基本吻合。通过量纲分析和数值模拟结合,推导了穿孔直径与相关影响参数的经验关系式。研究结果表明:当圆柱壳直径和厚度不变时,高速撞击产生的穿孔直径在径向和轴向都随着弹丸速度增大而增大;当弹丸速度和圆柱壳厚度不变时,高速撞击产生的穿孔直径随着圆柱壳自由梁直径的增大而减小;当弹丸速度和圆柱壳直径不变时,穿孔直径随着圆柱壳厚度的增大而减小。     

Elastic wave scattering in a solid half-space with a circular cylindrical hole using the Distributed Point Source Method

Ultrasonic wave scattering in a solid half-space containing a circular cylindrical hole is studied. The solid is struck by a bounded ultrasonic beam. Distributed Point Source Method (DPSM) which is a semi-analytical technique is adopted to model the ultrasonic field. A finite size transducer is used to generate the ultrasonic field. The circular hole in the solid is modeled by passive point sources. These point sources along with the point sources placed near the fluid–solid interface contribute to the scattered wave field in the solid. Even though the wave scattering by a circular hole in a solid is a classical problem this is the first time the complete variation of the scattered wave field generated by a bounded ultrasonic beam in a solid half-space with a circular hole is shown. The solution of this problem will help us to understand the distortion of the ultrasonic field in a solid and in the neighboring fluid due to the presence of a cylindrical anomaly which plays an important role in sensitivity analysis and calibration of different non-destructive testing techniques. Numerical examples for 1 MHz and 2.25 MHz transducers are given and scattered wave fields generated by holes of different diameters in an aluminum half-space are compared with the wave fields generated in the defect-free environment.     

The solution of weak formulation for axisymmetric problem of orthotropic cantilever cylindrical shell

Weak formulation of equilibrium equations including boundary conditions of laminated cylindrical shell is presented, and thermal stresses mixed state equation for axisymmetric problem of closed cantilever cylindrical shell is established. A unified approach and weak solutions are obtained for closed laminated cantilever cylindrical shell of arbitrary thickness under thermal and mechanical loadings. The equation and boundary conditions proposed in this paper are weakened, the method of this paper would be easy to popularize in dynamics analysis of elasticity. Foundation item: the National Natural Science Foundation of China (19392305)     

含内埋矩形脱层复合材料圆柱壳屈曲分析的混合变量条形传递函数方法

提出了一种分析含内埋矩形脱层正交各向异性圆柱壳稳定性问题的混合变量条形传递函数方法。首先基于Mindlin一阶剪切壳理论,通过定义圆柱壳的广义力变量和混合变量,建立了壳的改进混合变量能量泛函;然后,为了便于脱层壳的分区求解,通过引入条形单元,创建了基于混合变量条形传递函数解的含脱层和不合脱层两种超级壳单元;在此基础上,将含内埋矩形脱层的复合材料层合壳划分成两种超级壳单元的组合体,通过各超级壳单元相互之间连接结点处的位移连续和力平衡条件得到脱层壳的屈曲方程;最后由屈曲方程计算含内埋矩形脱层壳的屈曲载荷和屈曲模态。算例分析的结果验证了本方法的正确性,并给出了几种因素对屈曲载荷和屈曲模态的影响。     

Free vibration of circular cylindrical shell with constrained layer damping

Free vibration characteristics of circular cylindrical shell with passive constrained layer damping (PCLD) are presented. Wave propagation approach rather than finite element method, transfer matrix method, and Rayleigh-Ritz method is used to solve the problem of vibration of PCLD circular cylindrical shell under a simply supported boundary condition at two ends. The governing equations of motion for the orthotropic cylindrical shell with PCLD are derived on the base of Sanders’ thin shell theory. Numerical results show that the present method is more effective in comparison with other methods. The effects of the thickness of viscoelastic core and constrained layer, the elastic modulus ratio of orthotropic constrained layer, the complex shear modulus of viscoelastic core on frequency parameter, and the loss factor are discussed.     

Natural vibrations of a cantilever thin elastic orthotropic cylindrical shell

The natural vibrations of a cantilever thin elastic orthotropic circular cylindrical shell are studied. Dispersion equations for the determination of possible natural frequencies of cantilever closed shells and open shells with Navier hinged boundary conditions at the longitudinal edges are derived from the classical dynamic theory of orthotropic cylindrical shells. It is proved that there are asymptotic relationships between these problems and the problems for a cantilever orthotropic strip plate and for a cantilever rectangular plate and the eigenvalue problem for a semi-infinite closed orthotropic cylindrical shell with free end and for the same but open shell with Navier hinged boundary conditions at the longitudinal edges. A procedure to identify types of vibrations is presented. Orthotropic cylindrical shells with different radii and lengths are used as an example to find approximate values of the dimensionless natural frequency and damping factor for vibration modes __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 5, pp. 68–91, May 2008.     

含裂纹损伤充液圆柱壳的振动响应求解方法

薄壁圆柱壳流体冲击振动响应是一个复杂的流固耦合(FSI)动力学问题,对于薄壳状态监测与缺陷识别具有重要意义。基于Flügge壳体应力理论,得到壳体运动的高阶偏微分方程组(PDE),利用波传播方法获得圆柱壳系统振动响应。将壳体周围流体定义为理想声学介质,通过亥姆霍兹方程描述声压场,得到流固耦合条件下的薄壁圆柱壳受迫振动响应演变规律。针对薄壳裂纹损伤识别问题,基于断裂力学理论建立局部柔度矩阵,结合呼吸型线弹簧模型(LSM),构造裂纹附近应力及位移连续条件,获得含裂纹损伤充液圆柱壳的振动响应,进而给出一种基于振动能量流的裂纹损伤识别方法。研究结果表明：充液圆柱壳耦合系统在非线性激励下,位移响应在沿轴向、周向和径向的传播特性差异明显;裂纹的存在会导致结构局部柔度的降低和耦合系统固有频率下降;归一化输入功率流能够有效地对充液圆柱壳耦合系统进行结构裂纹损伤识别。研究结果可为充液薄壳振动响应方面的研究提供有益参考,也可为流固耦合条件下的结构裂纹损伤识别方面提供技术支持。     

表面加工塑性层对金属柱壳剪切带自组织单旋起始的影响

在外爆加载金属柱壳高速坍塌过程中, 发生塑性变形失稳形成的剪切带具有高度的自组织特征, 甚至出现剪切带排列的单旋现象—剪切带在顺时针和逆时针两个方向呈现一个方向占优的现象. 柱壳在坍塌时, 最大剪切应力位于柱壳内表面, 剪切带的形核及扩展行为受内表面材料介观状态的影响显著. 本文通过选材和控制柱壳加工工艺, 获得了内表面具有不同厚度塑性层的20钢柱壳, 采用厚壁圆筒实验技术, 研究了表面加工塑性层对金属柱壳绝热剪切带自组织单旋现象起始的影响规律及其物理机制. 研究结果表明, 金属柱壳内表面加工塑性层显著改变了试样剪切带的起始条件, 沿顺时针或逆时针方向排列的剪切带形核数量在总剪切带数量中所占比例取决于表面加工塑性层的厚度和晶粒取向, 具有单一晶粒拉伸方向的较厚塑性层样品更容易形成单向螺旋剪切带结构. 在相同变形条件下, 随着塑性层厚度增加, 剪切带平均形核速率和扩展速率增大, 剪切带平均间距减小. 结果可为理解金属柱壳在高速塌陷过程中绝热剪切带占优取向现象提供有价值的参考.      

电活性聚合物圆柱壳静态与动态电压下的响应及稳定性

摘要：在电活性聚合物圆柱壳内外表面施加电压,圆柱壳会变薄并且伸长,因此相同的电压会在圆柱壳内产生更大的电场。这个正反馈可能使圆柱壳厚度不断变薄,最终导致其失稳破坏。本文研究了电活性聚合物圆柱壳在静态和周期电压作用下的响应及稳定性问题。采用neo-Hookean材料模型得到描述圆柱壳表面运动的非线性常微分方程。给出了圆柱壳在不同厚度和边界条件下外加电压随圆柱壳变形的变化曲线,结果表明存在一个临界电压,当外加电压大于这一临界值时,圆柱壳将被破坏。同时,也讨论了厚度和边界条件对临界电压的影响。圆柱壳在正弦周期电压作用下,其运动随时间的变化是周期性的或拟周期性的非线性振动。给出了圆柱壳振动固有频率的计算结果,采用打靶法得到圆柱壳振动的周期解,并且用数值法研究了周期解的稳定性。采用数值仿真得到圆柱壳振动振幅随外加动态电压激励频率的变化曲线,结果表明圆柱壳会发生多频共振,共振时圆柱壳振幅发生跳跃,导致圆柱壳失稳破坏。最后给出共振点临近点的振动曲线和相图,并对其振动特性进行讨论。     

Transient radiation by a submerged fluid-filled cylindrical shell

The radiation by a submerged fluid-filled cylindrical shell in response to a transient external pressure pulse is considered, and a semi-analytical model based on the Reissner–Mindlin shell theory is employed to simulate the interaction numerically. Two types of radiated waves that have been previously seen in experimental images for a submerged evacuated cylindrical shell are observed in both the external and internal fluids, the symmetric Lamb waves S₀ and the antisymmetric Lamb (or pseudo-Rayleigh) waves A₀. The third type of radiated waves is also observed that has not been explicitly imaged either experimentally or numerically for a submerged evacuated cylindrical shell, and it is demonstrated that these waves are the Scholte–Stoneley waves A. The effect that the complex structure of the radiated field has on the wave phenomena in the internal fluid is analyzed for shells of several different thicknesses, and the results of this analysis are summarized in the form of diagrams suitable for the use at the pre-design stage.     

用柔爆索构成沿圆柱壳体周向呈余弦分布的冲量载荷

利用柔爆索爆炸加载模拟脉冲X射线辐照产生的汽化反冲冲量进行结构响应实验研究,需要对柔爆索载荷的分布特征进行直接的实验测定。按照优化设计结果在圆柱壳体周围排布一定数量的柔爆索,测量柔爆索爆炸在圆柱壳体表面不同角度处产生的冲量。测量结果表明通过优化设计柔爆索间距及柔爆索与圆柱壳体之间的距离可得到沿圆柱壳体周向呈余弦分布的冲量载荷。