溶液法改性高分子表面技术的研究 (Ⅰ)──改性高分子表面的结构和性质

医用高分子材料的生物相容性问题逐步引起人们的重视［１］．除合成相容性好的材料外,另一个途径是对现有高分子材料进行改性以提高其生物相容性,其中表面改性因其对材料本体的影响小,成为医用高分子材料研究的一个热点．Ｒｕｃｋｅｎｓｔｅｉｎ［２］最早利用溶液法改...     

Roughness and ordering at the interface of oxidized polystyrene and water

For the first time, atomistically detailed molecular dynamics calculations revealed molecular ordering of the water-oxidized atactic polystyrene (aPS) interface. Both ordering of the water molecules and the phenyl rings occur. In addition, the natural roughness of the surface has been simulated and compared to experimental values. The composition of the simulated aPS films is based on spin-coated aPS films that have been oxidized and characterized experimentally. The aPS surfaces are oxidized with ultraviolet-ozone radiation and have been characterized by XPS, AFM, and water contact angle measurements. XPS measurements show that the oxygen content in the sample increases rapidly with exposure and reaches saturation near 24 at. % of oxygen. The molecular dynamics simulations show smoothening of an hydrophobic aPS surface upon transition from vacuum to water. The smoothening decreases with increasing hydrophilicity. The calculations reveal ordering of oxidized phenyl rings for aPS surfaces in water. The order increases with increasing hydrophilicity. Additionally, we investigated the water structure near the aPS-water interface as a function of the surface hydrophilicity. With increasing hydrophilicity, the density of water at the aPS-water interface increases. The water density profile is steeper in the presence of hydrophobic aPS. The water shows an ordered layer near both the hydrophobic and hydrophilic surfaces; the position of this layer shifts toward the interface with increasing hydrophilicity.     

Particle adsorption in evaporating droplets of polymer latex dispersions on hydrophilic and hydrophobic surfaces

Stain patterns formed by drying up of droplets of polymer latex dispersion on hydrophilic and hydrophobic surfaces were examined in light of the mechanism of particle adsorption in evaporating droplets. On hydrophilic surfaces, the volume of droplets decreased with time, keeping the initial outline of contact area, and circular stain patterns were formed after the dry-up of droplets. By the microscopic observation of particles in the droplets, it was found that a large portion of the particles were forced to adsorb on the outline of the contact area where a microscopic thin water layer was formed because of hydrophilicity of the surface. On hydrophobic surfaces, on the other hand, the contact area of droplets decreased as evaporation proceeded, while no particle was adsorbed on the surface at the early stages. The particles in the droplets started to aggregate when the concentration of particles reached a critical value, and the aggregates adsorbed on the surface forming tiny spots after the dry-up. Time evolutions of contact angle, contact area and volume of the droplets were analyzed in light of differences in the adsorption mechanisms between hydrophilic and hydrophobic surfaces. Received: 14 January 1998 Accepted: 1 May 1998     

Effect of surface polarity on water contact angle and interfacial hydration structure

We perform molecular dynamics simulations of water in the presence of hydrophobic/hydrophilic walls at T = 300 K and P = 0 GPa. For the hydrophilic walls, we use a hydroxylated silica model introduced in previous simulations [Lee, S. H.; Rossky, P. J. J. Chem. Phys. 1994, 100, 3334. Giovambattista, N.; Rossky, P. J.; Debenedetti, P. G.; Phys. Rev. E 2006, 73, 041604.]. By rescaling the physical partial atomic charges by a parameter 0 相似文献   

Improving hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes by blending with amphiphilic hyperbranched-star polymer

To endow hydrophobic poly(vinylidene fluoride) (PVDF) membranes with reliable hydrophilicity and protein resistance, an amphiphilic hyperbranched-star polymer (HPE-g-MPEG) with about 12 hydrophilic arms in each molecule was synthesized by grafting methoxy poly(ethylene glycol) (MPEG) to the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent and blended with PVDF to fabricate porous membranes via phase inversion process. The chemical composition changes of the membrane surface were confirmed by X-ray photoelectron spectroscopy (XPS), and the membrane morphologies were measured by scanning electron microscopy (SEM). Water contact angle, static protein adsorption, and filtration experiments were used to evaluate the hydrophilicity and anti-fouling properties of the membranes. It was found that MPEG segments of HPE-g-MPEG enriched at the membrane surface substantially, while the water contact angle decreased as low as 49 degrees for the membrane with a HPE-g-MPEG/PVDF ratio of 3/10. More importantly, the water contact angle of the blend membrane changed little after being leached continuously in water at 60 degrees C for 30 days, indicating a quite stable presence of HPE-g-MPEG in the blend membranes. Furthermore, the blend membranes showed lower static protein adsorption, higher water and protein solution fluxes, and better water flux recovery after cleaning than the pure PVDF membrane.     

Surface properties and drug release behavior of polycaprolactone polyether blend and copolymer

The surface properties of polycaprolactone (PCL)–poly(ethylene glycol) (PEG) block copolymer (PCE) and blend (B-PCE) of PCL and PEG obviously affect the drug release behavior of the polymer. In this paper, both surface properties of PCE and B-PCE are studied and compared by measuring their water sorption and using the contact angle and X-ray photoelectron spectroscopy technique. The effect of the polyether segment content in PCE and B-PCE on hydrophilicity is discussed. The results show that a hydrophilic polyether segment moves towards the surface and enriches on the surface for either PCE or B-PCE. The enrichment content of the polyether segment of PCE and the hydrophilicity of its surface are higher than that of B-PCE. A reason for the different drug release rates for PCE and B-PCE is suggested.     

Role of interface in dispersion and surface energetics of polymer nanocomposites containing hydrophilic POSS and layered silicates

Three different hydrophilic nanofillers--natural and synthetic layered silicate as well as octaammonium polyhedral oligomeric silsesquioxane (POSS)--were incorporated into polyamide-6 by a solution-mixing method. The surfaces of the resulting polymer nanocomposites were characterized by X-ray diffraction, polarized optical microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and contact angle measurements. All polymer nanocomposites displayed enhancement in surface hydrophilicity as well as increase in surface free energy due to surface enrichment of the nanofillers. The degree of enhancement was found to depend on both nanofiller type and dispersion state. Interfacial interactions in the form of hydrogen bonding played an important role in affecting the dispersion state of the layered silicates. Exfoliated layered silicates caused a larger increase in hydrophilicity than aggregated layered silicate. On the other hand, aggregated POSS molecules were able to induce a large increase in hydrophilicity. Significant spreading of water was also observed on surfaces containing POSS molecules. Surface models have been proposed to explain these phenomena.     

Surface restructuring of polymers

Time-dependent contact angle measurements are employed to follow the dynamics of surface modifications of various polymeric surfaces of different hydrophilicities. The equilibration of a hydrophilic polymer in a strong polar environment (such as water) induces an increase in the polarity of the surface; the subsequent exposure of the restructured solid to a nonpolar environment decreases the polarity of the surface. The dynamics of these processes depends on the history of the specimen. Various phenomena, such as surface restructuring by the reorientation of the buried polar or nonpolar moieties, water penetration into the polymer, and the reorganization of water in the neighborhood of the surface, are suggested to be responsible for the time evolution of the dynamic contact angles.     

The effect of surface wettability on induction and growth of neurites from the PC-12 cell on a polymer surface

Surface properties of polymeric devices that are used to regenerate nervous damage are a point to be considered for axon regeneration in nerve system. In our previous studies, we prepared a wettability gradient on polyethylene (PE) surfaces using a corona discharge treatment from a knife-type electrode whose power increases gradually along the sample length. The PE surfaces were oxidized gradually with increasing power. The effect of surface wettability on the different types of cells has an important role for cell adhesion and proliferation. The purpose of this study is to investigate neurite formation on polymer surfaces with different wettability. Induction and growth of neurites from the rat pheochromocytoma (PC-12) cells attached on the polymer surfaces with different hydrophilicity were investigated using the wettability gradient PE surfaces prepared by a corona discharge treatment. Neurites were investigated for number and length of neurites in terms of surface wettability. It was observed that neurite formation of PC-12 cells was increased more onto the positions with moderate hydrophilicity of the wettability gradient surface than onto the more hydrophobic or hydrophilic positions. From those results, it could be assumed that initial adhesion of PC-12 cells was caused by more calf serum (CS) protein than nerve growth factor (NGF), whereas the neurite formation of PC-12 cells was caused by more NGF than CS protein. It follows from what has been said thus far that PC-12 cells are a differentiated neuronal phenotype with a long neurite at around the position 2.5 cm (water contact angle of about 55 deg). In conclusion, surface wettability plays an important role for neurite formation on the polymer surfaces for axon regeneration.     

Acid-Containing Tyrosine-Derived Polycarbonates: Wettability and Surface Reactivity

Tyrosine-derived polycarbonates having carboxylic acid pendant groups were characterized by water contact angle and X-ray photoelectron spectroscopy (XPS). A pronounce decrease of receding angle as well as contact angle hysteresis as a function of acid composition strongly indicated that the acid groups are more accessible at the water/polymer interface after hydration. pH dependent contact angle confirmed an existence of carboxylic acid groups in the surface region. The receding angle transition appearing in the pH range of 4-6 was a consequence of hydrophilicity change due to interconverting from carboxylic acid (-COOH) to carboxylate ion (-COO⁻). The surface compositions of imidazole-labeled polymers as analyzed by XPS were consistent with the bulk stoichiometry of the polymers. Reactivity of acid groups towards chemical reaction at the surface was also investigated. The acid groups at the surface of polymers were capable of adsorbing a significant amount of calcium ion from simulated body fluid and being activated by a reaction with N-hydroxysuccinimide.     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

Electrochemistry in bicontinuous microemulsions based on control of dynamic solution structures on electrode surfaces

Bicontinuous microemulsions (BMEs, Winsor III), also called middle-phase microemulsions, are low-viscosity, isotropic, thermodynamically stable, and spontaneously formed mixtures of water, oil, and surfactants. They are unique solution media for electrochemistry. Here, we introduce the recent progress in the electrochemistry of BMEs from their fundamental aspects to their practical applications. Electrochemistry using BMEs has two irreplaceable properties: the coexistence of hydrophilic and lipophilic species with high self-diffusion coefficients; and the dynamic deformation of structures at an oil/water/electrode ternary interface, which is easily changed according to the property of the electrode surface. Electrochemical contact with the micro-saline and oil phases in a BME is alternately or simultaneously achieved by controlling the hydrophilicity and lipophilicity of the electrode surfaces. The selective electrochemical analysis of hydrophilic and lipophilic antioxidants in liquid foods without extraction demonstrated as the use of the unique ternary solution structures of BME on solid surfaces.     

Influence of aqueous electrolytes on the wetting behavior of hydrophobic solid polymers-low-rate dynamic liquid/fluid contact angle measurements using axisymmetric drop shape analysis

The interaction of inorganic ions with low-energy hydrophobic surfaces was examined using model systems of solid polymers without ionizable functional surface groups in aqueous electrolyte solutions. Low-rate dynamic contact angle measurements with captive bubbles in conjunction with axisymmetric drop shape analysis (ADSA) were performed to study the influence of electrolyte ions (in the aqueous test solutions) on the wettability of the polymers. When various types of ions were used, no significant change in advancing and receding contact angles was observed. The contact angle hysteresis was small. The zeta potential of the model polymers in aqueous electrolyte solutions was determined from streaming potential measurements. The variation of the zeta potential at different pH levels indicates preferential adsorption of hydroxyl ions at this interface. However, the presence of electrolytes at the interface between water and the different model polymers did not influence the macroscopic contact angle. The results may suggest the absence of any specific interaction between the ions and the solid polymer, as this should result in changes of hydrophobicity. Similar to the air/water interface, the composition and the potential of the polymer/water interface are obviously determined predominantly by the aqueous phase with only slight influence from the solid phase.     

pH responsive surfaces with nanoscale topography

We report the preparation of nanostructured adaptive polymer surfaces by diffusion of an amphihilic block copolymer toward the interface. The surface segregation of a diblock copolymer, polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA), occurred when blended with high molecular weight polystyrene employed as a matrix. On annealing, the polymer surfaces changed both the chemical composition and the hydrophilicity depending on the environment and pH, respectively. By exposure to either water vapor or air, the surface wettability varied between hydrophilic and hydrophobic. In addition, surface enrichment on diblock copolymer by water vapor annealing led to self‐assembly occurring at the interface. Hence, nanostructured domains can be observed by AFM in liquid media. Moreover, the PAA segments placed at the interface respond to pH and can switch from an extended hydrophilic state at basic pH values to a collapsed hydrophobic state in acidic media. Accordingly, the surface morphology changed from swelled micelles to nanometer size holes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2982–2990, 2010     

Wettability of clean metal surfaces

Experimental and theoretical investigations bearing on the question of the wettability, by water, of clean oxygen-free metal surfaces are reviewed. Results on gold, silver, and copper are discussed in terms of surface cleanliness, surface structure, and extent of dispersion (London) force interaction. It is concluded that clean solid metal surfaces are hydrophilic. They will yield a zero degree contact angle when prepared in the amorphous state and possibly in the perfect crystalline state as well. These results do not necessarily preclude the possibility that physical interaction at the metal-water interface consists solely of dispersion forces.     

Surface modification of polypropylene: Hydrophilic finishing with carbohydrates

Conversion of hydrophobic polypropylene surfaces to hydrophilic, water wettable surfaces by adsorption of amphiphilic carbohydrates (“surfactant immobilization”) as well as by covalent bonding of sucrose residues via azid photolysis (“photochemical immobilization”) was investigated. Improvement of surface hydrophilicity was determined by contact angle measurements and application of special test inks for polyolefines.     

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Polydimethylsiloxane (PDMS) is a widely used material for manufacturing lab-on-chip devices. However, the hydrophobic nature of PDMS is a disadvantage in microfluidic systems. To transform the hydrophobic PDMS surface to hydrophilic, it was treated with radio-frequency (RF) air plasma at 150, 300, and 500 mTorr pressures for up to 30 min. Following the surface treatment, the PDMS specimens were stored in air, deionized water, or 0.14 M NaCl solution at 4 degrees C, 20 degrees C, and 70 degrees C. The change in the hydrophilicity (wettability) of the PDMS surfaces was followed by contact angle measurements and Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy as a function of time. As an effect of the RF plasma treatment, the contact angles measured on PDMS surfaces dropped from 113 +/- 4 degrees to 9 +/- 3 degrees . The chamber pressure and the treatment time had no or negligible effect on the results. However, the PDMS surface gradually lost its hydrophilic properties in time. The rate of this process is influenced by the difference in the dielectric constants of the PDMS and its ambient environment. It was the smallest at low temperatures in deionized water and largest at high temperatures in air. Apparently, the OH groups generated on the PDMS surface during the plasma treatment tended toward a more hydrophilic/less hydrophobic environment during the relaxation processes. The correlation between the FTIR-ATR spectral information and the contact angle data supports this interpretation.     

Bioactive surface modification of mica and poly(dimethylsiloxane) with hydrophobins for protein immobilization

Bioactive surfaces with appropriate hydrophilicity for protein immobilization can be achieved by hydrophobin II (HFBI) self-assembly on mica and polydimethylsiloxane (PDMS) surfaces. X-ray photoelectron spectroscopy and water contact angle measurements illustrated that the surface wettability can be changed from superhydrophobic (PDMS) or superhydrophilic (mica) to moderately hydrophilic, which is suitable for protein (chicken IgG) immobilization on both substrate surfaces. The results suggest that HFBI assembly, one kind of hydrophobin from Trichoderma reesei, may be a versatile and convenient method for the immobilization of biomolecules on diverse substrates, which may have potential applications in biosensors, immunoassays, and microfluidic networks.     

Wetting characteristics of aqueous rhamnolipids solutions

The wetting properties of surfactants on solid surfaces form the basis of many industrial and biological processes. The preferential adsorption of the surfactants from aqueous solutions onto solid surfaces alter the adhesion tension of the surface and this behavior may cause partial to complete wetting of the surfaces by the aqueous surfactant solutions. However, different types of surfactants show different wetting characteristics. To study the wetting properties of biologically produced rhamnolipids (RL), advancing contact angles of the aqueous solutions of the RL mixture of R1 and R2 in a ratio of R2/R1=1.1 were measured as a function of surfactant concentration. For a comparison of the wetting performance, sodium dodecyl sulfate (SDS) was chosen as the reference surfactant. A hydrophilic glass surface, a hydrophobic polymer, polyethylene terephthalate (PET), and gold surface were used as the solid surfaces to determine the wetting characteristics of rhamnolipids. At low surfactant concentrations (RL concentration <3x10(-5)M, SDS concentration<3x10(-4)M) contact angle (Theta) varied in a certain range depending on the character of the surfactant interactions with the surface. This was followed by a decrease in contact angle. Parallel to this behavior, at low surfactant concentrations the adhesion tension decreased, then remained constant and an increase at higher surfactant concentrations was obtained on hydrophobic surfaces. On hydrophilic surfaces a steady decrease in adhesion tension was observed with both surfactant solutions.     

Photochemical grafting of polysulfobetaine onto polyethylene and polystyrene surfaces and investigation of long‐term stability of the polysulfobetaine layer in seawater

Low‐density polyethylene (LDPE) and polystyrene (PS) films with hydrophilic surface were prepared by photochemical grafting of sulfobetaine‐based copolymer containing photolabile moiety, and long‐term stability of the hydrophilic nature of the surfaces in seawater was proved. The sulfobetaine‐based copolymer was prepared by copolymerization of N,N‐dimethyl‐N‐(3‐(methacryloylamino)propyl)‐N‐(3‐sulfopropyl) ammonium betaine with 2 or 5 mol% of N‐methacryloyl‐4‐azidoaniline, and the resulted polymers were grafted onto the plasma pretreated LDPE and PS films. The contact angle measurements were used to prove the modification as well as to follow the changes in the hydrophilicity during storage at room temperature under air atmosphere as well as in seawater at 32°C. The stability of the polymer layer was confirmed also by FTIR and AFM. Polysulfobetaine‐modified LDPE and PS surfaces exhibited significantly higher long‐term hydrophilicity compared with only plasma treated LDPE and PS surfaces.