掺镱飞秒激光晶体研究进展

飞秒激光在军事、医学、通讯、加工等领域有着重要应用,已经成为新世纪激光技术领域的研究热点。得益于激光二极管(LD)的快速发展,以LD作为泵浦源成为新型全固态飞秒激光器的发展趋势。Yb^3+离子掺杂的激光晶体材料因其独特的能级结构、宽带吸收与发射等优势,逐渐成为LD直接泵浦并实现1.0μm飞秒激光输出的重要增益介质。详细总结了当前掺Yb^3+飞秒激光晶体的研究进展,分析了目前存在的主要问题,给出了未来飞秒激光晶体发展的两个建议方向:高效率小功率飞秒激光和大功率高能量飞秒激光。以Yb^3+:Sr3Y2(BO3)4晶体为例,详细研究了其晶体生长、光谱、连续与飞秒激光性能,并实现了中心波长在1060 nm处脉宽为116 fs,平均输出功率为1.08 W,光光转换效率为33.1%的高效率飞秒激光输出,表明Yb^3+:Sr3Y2(BO3)4及其同体系晶体是一类优异的高效率飞秒激光材料。     

Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine

A status report on rapidly advancing femtosecond laser technology, three-dimensional (3D) microstructuring by multiphoton illumination technique, is given. Taking its origin from multiphoton microscopy, this technique is now becoming an important microfabrication tool. In our work we apply near-infrared Ti:sapphire femtosecond laser pulses (at 800/780 nm) for 3D material processing. When tightly focused into the volume of a photosensitive material (or photoresist), they initiate 2PP process by, for example, transferring liquid into the solid state. This allows the fabrication of any computer generated 3D structure by direct laser “recording” into the volume of photosensitive material. 2PP of photosensitive materials irradiated by femtosecond laser pulses is now considered as enabling technology for the fabrication of 3D photonic crystals and photonic crystal templates. In particular, 2PP allows one to introduce defects at any desired locations, which is crucial for the practical applications. Recently, we studied possible applications of 2PP technique in biomedicine. 2PP is a very interesting technique for the fabrication of drug delivery systems, scaffolds for tissue engineering, and medical implants. These and other biomedical applications of 2PP will be reviewed.     

Femtosecond laser 3D fabrication of whispering-gallerymode microcavities

Whispering-gallery-mode(WGM) microcavities with high-quality factors and small volumes have attracted intense interests in the past decades because of their potential applications in various research fields such as quantum information, sensing, and optoelectronics. This leads to rapid advance in a variety of processing technologies that can create high-quality WGM micro-cavities. Due to the unique characteristics of femtosecond laser pulses with high peak intensity and ultrashort pulse duration, femtosecond laser shows the ability to carry out ultrahigh precision micromachining of a variety of transparent materials through nonlinear multiphoton absorption and tunneling ionization. This review paper describes the basic principle of femtosecond laser direct writing, and presents an overview of recent progress concerning femtosecond laser three-dimensional(3D) fabrications of optical WGM microcavities, which include the advances in the fabrications of passive and active WGMs microcavities in a variety of materials such as polymer, glass and crystals, as well as in processing the integrated WGM-microcavity device. Lastly, a summary of this dynamic field with a future perspective is given.     

Display method with compensation of the spatial frequency response of a liquid crystal spatial light modulator for holographic femtosecond laser processing

Liquid crystal spatial light modulators, which are widely used as display devices for computer-generated holograms, have modulation characteristics that depend on spatial frequency. We describe a method for displaying a computer-generated hologram on a liquid crystal spatial light modulator with compensation of its spatial frequency response. Using this method, we demonstrate a binary phase grating with smaller dependence on the spatial frequency. We also demonstrate application of the display method to holographic femtosecond laser processing.     

Fabrication of 3D microfluidic structures inside glass by femtosecond laser micromachining

Femtosecond lasers have opened up new avenues in materials processing due to their unique characteristics of ultrashort pulse widths and extremely high peak intensities. One of the most important features of femtosecond laser processing is that a femtosecond laser beam can induce strong absorption in even transparent materials due to nonlinear multiphoton absorption. This makes it possible to directly create three-dimensional (3D) microfluidic structures in glass that are of great use for fabrication of biochips. For fabrication of the 3D microfluidic structures, two technical approaches are being attempted. One of them employs femtosecond laser-induced internal modification of glass followed by wet chemical etching using an acid solution (Femtosecond laser-assisted wet chemical etching), while the other one performs femtosecond laser 3D ablation of the glass in distilled water (liquid-assisted femtosecond laser drilling). This paper provides a review on these two techniques for fabrication of 3D micro and nanofluidic structures in glass based on our development and experimental results.     

Fabrication of microelectrodes deeply embedded in LiNbO3 using a femtosecond laser

We present a novel technique to fabricate deeply embedded microelectrodes in LiNbO₃ using femtosecond pulsed laser ablation and selective electroless plating. The fabrication process mainly consists of four steps, which are (1) micromachining of microgrooves on the surface of LiNbO₃ by femtosecond laser ablation; (2) formation of AgNO₃ films on substrates; (3) scanning the femtosecond laser beam in the fabricated microgrooves for modification of the inner surfaces; and (4) electroless copper plating. The void-free electroless copper plating is obtained with appropriate cross section of microgrooves and uniform initiation of the autocatalytic deposition on the inner surface of grooves. The dimension and shape of the microelectrodes could be accurately controlled by changing the conditions of femtosecond laser ablation, which in turn can control the distribution of electric field inside LiNbO₃ crystal for various applications, opening up a new approach to fabricate three-dimensional integrated electro-optic devices.     

Space-selective growth of frequency-conversion crystals in glasses with ultrashort infrared laser pulses

We report on space-selective growth of a second-harmonic-generation beta-BaB(2)O(4) (BBO) crystal inside a BaO-Al(2)O(3)-B(2)O(3) glass sample at the focal point of an 800-nm femtosecond laser beam. A spherical heated region was formed during the focused laser irradiation through observation with an optical microscope. We moved the heated region by changing the position of the focal point of the laser beam relative to the glass sample. We grew BBO crystal continuously in the glass sample by adjusting the moving speed of the heated zone. Our results demonstrate that functional crystals can be formed three dimensionally in glasses by use of a nonresonant ultrashort pulsed laser.     

Self-formation of void array in Al2O3 crystal by femtosecond laser irradiation

The femtosecond laser induced void array inside Al2O3 crystals was discussed.The void array was formed spontaneously under the irradiation of a single beam of infrared femtosecond laser which was focused at a fixed point inside the Al2O3 crystal sample.It was found that the regular voids only could be fabricated near the sample surface,which was different from the situation in CaF2 single crystal reported before.The possible mechanism of the phenomena was also discussed.     

Femtosecond laser modification of living neuronal network

An all-wet femtosecond laser microprocessing technique was utilized for patterning and cutting functional network of living neuronal cells on a multi-electrode dish (MED). The neuronal cells cultured on a source substrate were transferred onto an electrode in a MED probe in solution by utilizing a femtosecond laser-induced impulsive force and a pattern of neuronal cells were formed on the MED probe. The cellular activity of the detached neurons was supported that neurites could be regenerated around the electrodes. As another processing method, the neurons stretching between electrodes were selectively cut by the direct femtosecond laser irradiation and the spontaneous electrical activity of the neuronal network was evaluated. While the spontaneous action potentials of neurons were synchronized before the cutting, the synchronization disappeared after the cutting, indicating that the neuronal network is locally disconnected by the laser cutting. The present method is applicable to artificial reconstruction of living neuronal network.     

Widely linear and non-phase-matched optical-to-terahertz conversion on GaSe:Te crystals

We demonstrate the widely linear and broadband terahertz (THz) generation on GaSe:Te crystals by femtosecond laser pulses. It was found that the dopant, Te atoms, in GaSe crystals significantly enhances the efficiency of THz generation, and its central frequency can be tuned by varying the crystal thickness through non-phase-matched optical rectification. Moreover, the wide-ranging linearity for the optical-to-THz conversion and central-frequency-tunable THz generation promise for GaSe:Te crystals to be potential materials for high-power (>1.36 μW) THz applications.     

Femtosecond laser-assisted etching of Pyrex glass with aqueous solution of KOH

A femtosecond laser-assisted etching technique was applied to Pyrex glass, a kind of borosilicate glass, to perform removal processing with three-dimensional arbitrarity in design and micrometer-order spatial resolution. An aqueous solution of potassium hydroxide (KOH) was adopted as a highly selective etchant. The rate and selectivity of etching were evaluated from in situ images, and fabrication of three-dimensional microchannels was demonstrated.     

Depressed cladding, buried waveguide laser formed in a YAG:Nd3+ crystal by femtosecond laser writing

Depressed cladding waveguides have been formed in laser crystals by a tightly focused beam of a femtosecond laser. A laser based on a depressed cladding waveguide in a neodymium-doped YAG crystal has been demonstrated for what is believed to be the first time.     

Cross patterning on MgO based on dislocations using femtosecond laser irradiation

We show a unique technique to form dense dislocations locally inside a MgO single crystal with a rock-salt type structure using femtosecond (fs) laser irradiation. Cross-shaped patterns of micrometer size, originating from densely introduced dislocations, are formed spontaneously around the focal point. We controlled the three-dimensional propagation of the dislocations by adjusting the pulse energy of the fs laser and NA of objective lens. The technique may open up a new field of dislocation technology for optical applications.     

Three-dimension direct writing TiO<Subscript>2</Subscript> crystalline patterns in Bi-free glass using femtosecond laser

Crystalline TiO₂ was induced three dimensionally inside Bi-free glass sample by an 800 nm, 250-kHz femtosecond laser irradiation. Micro-Raman spectra analysis indicated that the laser-induced crystals in the focal point of the laser beam were monophase TiO₂ rutile. Continuous crystalline lines were written through moving the focal point of the laser beam inside the glass. The results demonstrate that this technique is a convenient method to engrave three-dimensional patterns of crystals for fabricating integrated optical devices in transparent materials.     

Two-photon-induced laser annealing for enhancement of photoluminescence intensity in ZnSe crystal

We present the finding that photoluminescence intensity in ZnSe crystal is enhanced after exposure to a femtosecond laser beam. After the crystal was illuminated with laser light of 1.04 MW/cm(2) during 300 s, photoluminescence intensity was increased approximately 20%. The region in which photoluminescence intensity was enhanced was localized in the optical axis, because this phenomenon occurred in the two-photon excitation process. It is possible to achieve three-dimensional control of photoluminescence intensity by illumination with laser light.     

Waveguides in lithium niobate fabricated by focused ultrashort laser pulses

We report on investigations of the bulk microstructuring of lithium niobate crystals with intense femtosecond laser pulses. In different crystal cuts, optical waveguides were produced whose properties depend strongly on the processing parameters. To explore the origin of the refractive index changes, we subjected the crystals to different conditions (like temperature, illumination, etc.) while monitoring the waveguide output. This way several mechanisms for the change in refractive index could be singled out. These include the photorefractive effect, inhomogeneous ion concentrations and stress in the crystalline lattice. As an application, we demonstrate frequency doubling of 1064 nm laser radiation in a microstructured phase-matched waveguide.     

Photorefraction in LiNbO<Subscript>3</Subscript>:Fe crystals with femtosecond pulses at 532 nm

Photorefractive index gratings are written into iron-doped lithium niobate crystals using femtosecond laser pulses and cw light, both having a wavelength of 532 nm. The saturation value of the refractive index changes in as-grown samples is found to decrease with increasing peak pulse intensity. Furthermore, in oxidized crystals, writing with femtosecond pulses is much faster than with cw light and retains about the same writing speed than in as-grown crystals. We propose a charge transport model that addresses the special case of recording with high intensity femtosecond pulses.     

不同原料DKDP晶体的生长和损伤阈值

 采用传统降温法,利用不同原料从氘化程度为85%的溶液生长了四方相磷酸二氘钾(DKDP)晶体,并选取部分样品进行三倍频光损伤阈值测试。实验结果表明：不同纯度原料对DKDP晶体的损伤阈值以及DKDP晶体的生长溶液稳定性的影响效果相反,即由于原料中杂质金属离子含量的差别,高纯原料生长的晶体较一般原料生长的晶体损伤阈值可提高1.5倍,但其生长溶液的稳定性比一般原料低。     

Approach for growth of high-quality and large protein crystals

Three crystallization methods for growing large high-quality protein crystals, i.e. crystallization in the presence of a semi-solid agarose gel, top-seeded solution growth (TSSG) and a large-scale hanging-drop method, have previously been presented. In this study the effectiveness of crystallization in the presence of a semi-solid agarose gel has been further evaluated by crystallizing additional proteins in the presence of 2.0% (w/v) agarose gel, resulting in complete gelification with high mechanical strength. In TSSG the seed crystals are hung by a seed holder protruding from the top of the growth vessel to prevent polycrystallization. In the large-scale hanging-drop method, a cut pipette tip was used to maintain large-scale droplets consisting of protein-precipitant solution. Here a novel crystallization method that combines TSSG and the large-scale hanging-drop method is reported. A large and single crystal of lysozyme was obtained by this method.     

Self-Assembled Quasi-Periodic Voids in Glass Induced by a Tightly Focused Femtosecond Laser

Multiple refocusing of a tightly focused femtosecond laser due to the dynamic transformation between self-focusing and self-defocusing is employed to provide a novel method to produce quasi-periodic voids in glass. It is found that the diameter or the interval of the periodic voids increases with the increasing pulse energy of the laser. The detailed course for producing periodic voids is discussed by analysing the damaged track induced by the tightly focused femtosecond laser pulses. It is suggested that this periodic structure has potential applications in fabrication of three-dimensional optical devices.