功能梯度条共线Griffith裂纹反平面剪切冲击

研究正交各向异性功能梯度条中多个共线Griffith裂纹的反平面剪切冲击问题．材料两个方向的剪切模量假定按比例同时以特定的梯度变化．采用Laplace和Fourier变换及引进位错密度函数将问题化为求解Cauchy奇异积方程，进而化为代数方程数值求解．考查材料非均匀性、正交性和功能梯度条高度对裂尖动态断裂特性的影响．动应力强度因子的数值结果显示：增加剪切模量的梯度和(或)增加垂直于裂纹面方向的剪切模量，可以抑制动应力强度因子的幅度；若功能梯度条较薄，增大条形域的高度也可抑制裂纹扩展．     

DYNAMIC STRESS FIELD AROUND THE MODE Ⅲ CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｇｒｅａｔａｔｔｅｎｔｉｏｎｓｈａｖｅｂｅｅｎｐａｉｄｔｏｔｈｅｒｅｓｅａｒｃｈｏｆＦｕｎｃｔｉｏｎａｌｌｙＧｒａｄｅｄＭａｔｅｒｉａｌｓ(ＦＧＭ).Ｆｒｏｍｔｈｅｖｉｅｗｐｏｉｎｔｓｏｆａｐｐｌｉｅｄｍｅｃｈａｎｉｃｓ,ＦＧＭａｒｅｎｏｎ＿ｈｏｍｏｇｅｎｅｏｕｓｓｏｌｉｄｓ.Ｔｈｅｎｏｎ＿ｈｏｍｏｇｅｎｅｉｔｙｏｆＦＧＭｈａｓａｇｒｅａｔｉｎｆｌｕｅｎｃｅｏｎｔｈｅｉｒｍｅｃｈａｎｉｃａｌｂｅｈａｖｉｏｒ,ｅｓｐｅｃｉａｌｌｙｗｈｅｎｔｈｅｃｏｍｐ…     

Torsional impact response of a penny-shaped crack in a functional graded strip

The torsional impact response of a penny-shaped crack in a nonhomogeneous strip is considered. The shear modulus is assumed to be functionally graded such that the mathematics is tractable. Laplace and Hankel transforms were used to reduce the problem to solving a Fredholm integral equation. The crack tip stress field is obtained by considering the asymptotic behavior of Bessel function. Explicit expressions of both the dynamic stress intensity factor and the energy density factor were derived. And it is shown that, as crack driving force, they are equivalent for the present crack problem. Investigated are the effects of material nonhomogeneity and strip‘s highness on the dynamic fracture behavior.Numerical results reveal that the peak of the dynamic stress intensity factor can be suppressed by increasing the nonhomogeneity parameter of the shear modulus, and that the dynamic behavior varies little with the adjusting of the strip‘ s highness.     

A PENNY-SHAPED CRACK IN A MAGNETOELECTROELASTIC LAYER UNDER RADIAL SHEAR IMPACT LOADING

This paper analyzes the dynamic magnetoelectroelastic behavior induced by a penny- shaped crack in a magnetoelectroelastic layer.The crack surfaces are subjected to only radial shear impact loading.The Laplace and Hankel transform techniques are employed to reduce the prob- lem to solving a Fredholm integral equation.The dynamic stress intensity factor is obtained and numerically calculated for different layer heights.And the corresponding static solution is given by simple analysis.It is seen that the dynamic stress intensity factor for cracks in a magnetoelec- troelastic layer has the same expression as that in a purely elastic material.And the influences of layer height on both the dynamic and static stress intensity factors are insignificant as h/a>2.     

The dynamic behavior of two collinear interface cracks in magneto-electro-elastic materials

In this paper, the dynamic behavior of two collinear symmetric interface cracks between two dissimilar magneto-electro-elastic material half planes under the harmonic anti-plane shear waves loading is investigated by Schmidt method. By using the Fourier transform, the problem can be solved with a set of triple integral equations in which the unknown variable is the jump of the displacements across the crack surfaces. To solve the triple integral equations, the jump of the displacements across the crack surface is expanded in a series of Jacobi polynomials. Numerical solutions of the stress intensity factor, the electric displacement intensity factor and the magnetic flux intensity factor are given. The relations among the electric filed, the magnetic flux field and the stress field are obtained.     

DYNAMIC STRESS FIELD AROUND THE MODE Ⅲ CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL

The problem of a Griffith crack in an unbounded orthotropic functionally graded material subjected to antipole shear impact was studied. The shear moduli in two directions of the functionally graded material were assumed to vary proportionately as definite gradient. By using integral transforms and dual integral equations, the local dynamic stress field was obtained. The results of dynamic stress intensity factor show that increasing shear moduli’s gradient of FGM or increasing the shear modulus in direction perpendicular to crack surface can restrain the magnitude of dynamic stress intensity factor.     

SCATTERING OF ANTI-PLANE SHEAR WAVES BY A SINGLE CRACK IN AN UNBOUNDED TRANSVERSELY ISOTROPIC ELECTRO-MAGNETO-ELASTIC MEDIUM

A theoretical treatment of the scattering of anti-plane shear (SH) waves is provided by a single crack in an unbounded transversely isotropic electro-magneto-elastic medium. Based on the differential equations of equilibrium, electric displacement and magnetic induction intensity differential equations, the governing equations for SH waves were obtained. By means of a linear transform, the governing equations were reduced to one Helmholtz and two Laplace equations. The Cauchy singular integral equations were gained by making use of Fourier transform and adopting electro-magneto imperme ableboundary conditions. The closed form expression for the resulting stress intensity factor at the crack was achieved by solving the appropriate singular integral equations using Chebyshev polynomial. Typical examples are provided to show the loading frequency upon the local stress fields around the crack tips. The study reveals the importance of the electro-magneto-mechanical coupling terms upon the resulting dynamic stress intensity factor.     

Transient analysis of a propagating crack with finite length subjected to a horizontally polarized shear wave

In this study, the transient response of a finite crack subjected to an incident horizontally polarized shear wave and then propagated with a constant speed in an unbounded elastic solid is investigated. Initially, the finite crack with crack length l is stress-free and at rest. At time t = 0, an incident horizontally polarized shear wave strikes at one of the crack tips and will arrive at the other tip at a later time. Then, two crack tips propagate along the crack tip line with different velocities as the corresponding stress intensity factors reach their fracture toughness. The correspondent configuration is shown in Fig. 1

1. Download : Download high-res image (31KB)
2. Download : Download full-size image

Fig. 1. Configuration and coordinate systems of a finite crack in an unbounded medium.

. In analyzing this problem, diffracted waves generated by two propagating crack tips must be taken into account and it makes the analysis extremely difficult. In order to solve this problem, the transform formula in the Laplace transform domain between moving and stationary coordinates is first established. Complete solutions are determined by superposition of proposed fundamental solutions in the Laplace transform domain. The fundamental solutions to be used are from the problems of applying exponentially distributed traction and screw dislocation on crack faces and along the crack tip line, respectively. The exact transient solutions of dynamic stress intensity factor for the first few diffracted waves that arrive at two crack tips are obtained and expressed in compact formulations. Numerical calculations of dynamic stress intensity factors for both tips are evaluated and the results are discussed in detail.     

Scattering of anti-plane shear waves by a single crack in an unbounded trasversely isotropic electro-magneto-elastic medium

A theoretical treatment of the scattering of anti-plane shear (SH) waves is provided by a single crack in an unbounded transversely isotropic electro-magneto-elastic medium. Based on the differential equations of equilibrium, electric displacement and magnetic induction intensity differential equations, the governing equations for SH waves were obtained. By means of a linear transform, the governing equations were reduced to one Helmholtz and two Laplace equations. The Cauchy singular integral equations were gained by making use of Fourier transform and adopting electro-magneto impermeable boundary conditions. The closed form expression for the resulting stress intensity factor at the crack was achieved by solving the appropriate singular integral equations using Chebyshev polynomial. Typical examples are provided to show the loading frequency upon the local stress fields around the crack tips. The study reveals the importance of the electro-magneto-mechanical coupling terms upon the resulting dynamic stress intensity factor. Contributed by SHEN Ya-peng Foundation item: the National Natural Science Foundation of China (10132010, 50135030) Biographies: DU Jian-ke (1970∼)     

SH波在正交各向异性功能梯度无限长条中心裂缝处的散射

研究了正交各向异性功能梯度材料无限长条中心裂缝对SH波的散射问题,为方便起见,材料两个方向的剪切模量和密度假定为指数模型.通过Fourier积分变换,将问题转化为对偶积分方程的求解.然后,用Cop-son方法求解对偶积分方程,定义了标准动应力强度因子,通过数值算例,讨论了在SH波作用下,裂缝尖端的标准动应力强度因子与入射波的频率、材料参数之间的关系.     

The dynamic stress intensity factor analysis of adhesively bonded material interface crack with damage under shear loading

This paper studies the dynamic stress intensity factor (DSIF) at the interface in an adhesive joint under shear loading. Material damage is considered. By introducing the dislocation density function and using the integral transform, the problem is reduced to algebraic equations and can be solved with the collocation dots method in the Laplace domain. Time response of DSIF is calculated with the inverse Laplace integral transform. The results show that the mode Ⅱ DSIF increases with the shear relaxation parameter, shear module and Poisson ratio, while decreases with the swell relaxation parameter. Damage shielding only occurs at the initial stage of crack propagation. The singular index of crack tip is -0.5 and independent on the material parameters, damage conditions of materials, and time. The oscillatory index is controlled by viscoelastic material parameters.     

功能梯度材料裂纹尖端动态应力场

研究受反平面剪切作用的功能梯度材料动态裂纹问题,通过积分变换-对偶积分方程方法推出了裂纹尖端动态应力场,时间域内的动态应力强度因子由Laplace数值反演获得,研究结果表明功能梯度材料的梯度越大,相应的裂纹问题的动态应力强度因子值越低。     

Transient response of a cracked piezoelectric strip under arbitrary electro-mechanical impact

By using the well-developed integral transform methodology, the dynamic response of stress and electric displacement around a finite crack in an infinite piezoelectric strip are investigated under arbitrary dynamic anti-plane loads. The dynamic stress intensity factors and electric displacement are obtained analytically. It is shown that the dynamic crack-tip stress and electric field still have a square-root singularity. Numerical computations for the dynamic stress intensity factor show that the electric load has a significant influence on the dynamic response of stress field. The higher the ratio of the crack length to the width of the strip, the higher the peak value of the dynamic stress intensity factor is. On the other hand, the dynamic response of the electric field is determined solely by the applied electric load. The electric field will promote or retard the propagation of the crack depending on the time elapse since the application of the external electro-mechanical loads. The project supported by the National Natural Science Foundation of China and the Post-Doctor Science Foundation of China     

A moving mode-III crack in functionally graded piezoelectric material: permeable problem

In this paper a moving mode-III crack in functionally graded piezoelectric materials (FGPM) is studied. The crack surfaces are assumed to be permeable. The governing equations for FGPM are solved by means of Fourier cosine transform. The mathematical formulation for the permeable crack condition is derived as a set of dual integral equations, which, in turn, are reduced to a Fredholm integral equation of the second kind. The results obtained indicate that the stress intensity factor of moving crack in FGPM depends only on the mechanical loading. The gradient parameter of the FGPM and the moving velocity of the crack do have significant influence on the dynamic stress intensity factor.     

Moving crack for functionally grated material in an infinite length strip under antiplane shear

Considered is a Yoffe crack in an infinite strip of functionally grated material (FGM) subjected to antiplane shear. The shear moduli in two directions of FGM are assumed to be of exponential form. The dynamic stress intensity factor and strain energy density factor at the crack tip are obtained by using integral transforms and dual-integral equations. The numerical results show that the decrease of the strain energy density factor varies with the shear moduli gradient, and the increase of the strain energy density factor varies with the increase of the moving crack speed. The ratio of shear moduli in material vertical orientation has a great influence on the strain energy density factor.     

A Zener–Stroh crack interacting with a coated inclusion with generalized Irwin plastic zone correction

The elastic–plastic fracture behavior of a Zener–Stroh crack interacting with a coated inclusion in composite materials has been investigated with crack tip plastic zone corrections. With the distributed dislocation method, the crack problem is formulated into a set of singular integral equations which are solved numerically. The plastic zone sizes at the both crack tips are determined by a generalized Irwin model where Von Mises stress yielding criterion is used. The stress intensity factor (SIF), the plastic zone size (PZS), the crack tip opening displacement (CTOD) and the effective stress intensity factor have been evaluated. In the numerical examples, the influence of the inclusion shear modulus, the coating-layer thickness and shear modulus, as well as the distance between the crack and inclusion, on the SIF, the PZS and the CTOD are discussed in detail. Numerical examples show that increasing the shear modulus or the thickness of the coating phase, the influence of the inclusion on the normalized SIF and the normalized PZS will be shielded.     

Impact response of a piezoelectric layered composite plate with a crack

The dynamic response of a central crack in a piezoelectric layered composite plate under normal impact is analyzed. The crack is oriented normally to the interfaces. The Laplace and Fourier transform techniques are used to formulate the problem in terms of a singular integral equation. The order of stress singularity around the tip of the terminated crack is also obtained. Numerical calculations are carried out, and the main results presented are the variations of the dynamic stress intensity factor and the dynamic energy density factor versus time as functions of the geometric parameters and the piezoelectric material properties of the layered composite plate.     

Dynamic behavior of two unequal parallel permeable interface cracks in a piezoelectric layer bonded to two half piezoelectric materials planes

IntroductionDuetotheintrinsicelectro_mechanicalcouplingbehavior,piezoelectricmaterialsareveryusefulinelectronicdevices.However,mostpiezoelectricmaterialsarebrittlesuchasceramicsandcrystals.Therefore ,piezoelectricmaterialshaveatendencytodevelopcriticalcracksduringthemanufacturingandthepolingprocesses.So ,itisimportanttostudytheelectro_elasticinteractionandfracturebehaviorsofpiezoelectricmaterials.Theincreasingattentiontothestudyofcrackproblemsinpiezoelectricmaterialshasledtoalotofsignificantw…     

The stress intensity factor history due to three-dimensional transient loading on the faces of a crack

Aprocedure is described for determining dynamic stress intensity factor histories for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to tractions that result in variation of the stress intensity factor along the crack edge. The procedure is based on integral transform methods and the properties of analytic functions of a complex variable. The procedure is illustrated for the case of a pair of opposed line loads suddenly applied on the crack faces along a line perpendicular to the crack edge. An exact expression is obtained for the resulting mode I stress intensity factor as a function of time for any point along the crack edge. Some features of the solution, as well as possible extensions of the procedure, are discussed.     

Elastodynamic analysis of a crack at an arbitrary angle to the graded interfacial zone in bonded half-planes under antiplane shear impact

A solution is provided for the elastodynamic problem of a crack at an arbitrary angle to the graded interfacial zone in bonded media under the action of antiplane shear impact. The interfacial zone is modeled by a nonhomogeneous interlayer with the spatially varying shear modulus and mass density in terms of power functions between the two dissimilar, homogeneous half-planes. Based on the use of Laplace and Fourier integral transforms and the coordinate transformations of basic field variables, formulation of the transient crack problem is reduced to solving a Cauchy-type singular integral equation in the Laplace transform domain. The crack-tip response in the physical domain is recovered via the inverse Laplace transform and the values of dynamic mode III stress intensity factors are obtained as a function of time. A comprehensive parametric study is then presented of the effects of crack obliquity on the overshoot behavior of the transient crack-tip response, by plotting the peak values of the dynamic stress intensity factors versus the crack orientation angle for various material and geometric combinations of the bonded system.