Peptide bis-intercalator binds DNA via threading mode with sequence specific contacts in the major groove

BACKGROUND: We previously described a general class of DNA polyintercalators in which 1,4,5,8-naphthalenetetracarboxylic diimide (NDI) intercalating units are connected via peptide linkers, resulting in the first known tetrakis- and octakis-intercalators. We showed further that changes in the composition of the peptide tether result in novel DNA binding site specificities. We now examine in detail the DNA binding mode and sequence specific recognition of Compound 1, an NDI bis-intercalator containing the peptide linker gly-gly-gly-lys. RESULTS: 1H-NMR structural studies of Compound 1 bound to d(CGGTACCG)(2) confirmed a threading mode of intercalation, with four base pairs between the diimide units. The NMR data, combined with DNAse I footprinting of several analogs, suggest that specificity depends on a combination of steric and electrostatic contacts by the peptide linker in the floor of the major groove. CONCLUSIONS: In view of the modular nature and facile synthesis of our NDI-based polyintercalators, such structural knowledge can be used to improve or alter the specificity of the compounds and design longer polyintercalators that recognize correspondingly longer DNA sequences with alternating access to both DNA grooves.     

A general strategy to determine a target DNA sequence of a short peptide: application to a d-peptide.

Short peptides could potentially provide a novel element to read-out DNA sequences from the major groove. However, it is difficult to determine sequence-preference of de novo designed monomeric short peptides. Because DNS-binding affinity and specificity of short peptides are usually much lower than those of native DNA-binding proteins, determining the sequence-preference of short peptides by conventional methods utilized to deduce the target sequence of proteins often produces an unclear outcome. We report here a general strategy to defining the sequence-preference of a DNA-binding short peptide by using the heterodimers. A GCN4 basic region peptide tethers a low-affinity DNA-binding peptide adjacent to a GCN4 binding sequence through the cyclodextrin-adamantane association, thereby increasing local concentration of the low-affinity peptide on degenerated DNA sequences. An increase of the local concentration allows one to select a preferential sequence for the low-affinity DNA binding peptide. The method successfully identified specific sequences of short peptides derived from native DNA-binding proteins. The usefulness of this approach has been demonstrated by identifying preferred DNA targets for a peptide composed only of d-amino acids. The method is potentially applicable not only to artificial peptides, but also to other synthethic ligands.     

Substrate phage as a tool to identify novel substrate sequences of proteases

Combinatorial phage peptide libraries have been used to identify the ligands for specific target molecules. These libraries are also useful for identification of the specific substrates of various proteases. A substrate phage library has a random peptide sequence at the N-terminus of the phage coat protein and an additional tag sequence that enables attachment of the phage to an immobile phase. When these libraries are incubated with a specific enzyme, such as a protease, the uncleaved phage is excluded from the solution with tag-binding macromolecules. This provides a novel approach to define substrate specificity. The aim of this review is to summarize recent progress on the application of the substrate phage technique to identify specific substrates of proteolytic enzymes. As an example, some of our own experimental data on the selection and characterization of substrate sequences for thrombin, a serine protease, and membrane type-1 matrix metalloproteinase (MT1-MMP) will be presented. Using this approach, the canonical consensus substrate sequence for thrombin was deduced from the selected clones. As expected from the collagenolytic activity of MT1-MMP, a collagen-like sequence was identified in the case of MT1-MMP. A more selective substrate sequence for MT1-MMP was identified during a substrate phage screen. The delineation of the substrate specificity of proteases will help to elucidate the enzymatic properties and the physiological roles of these enzymes. Comprehensive screening of very large numbers of potential substrate sequences is possible with substrate phage libraries. Thus, this approach allows novel substrate sequences and previously unknown target molecules to be defined.     

The Thiophene “Sigma‐Hole” as a Concept for Preorganized,Specific Recognition of G⋅C Base Pairs in the DNA Minor Groove

In spite of its importance in cell function, targeting DNA is under‐represented in the design of small molecules. A barrier to progress in this area is the lack of a variety of modules that recognize G ? C base pairs (bp) in DNA sequences. To overcome this barrier, an entirely new design concept for modules that can bind to mixed G ? C and A ? T sequences of DNA is reported herein. Because of their successes in biological applications, minor‐groove‐binding heterocyclic cations were selected as the platform for design. Binding to A ? T sequences requires hydrogen‐bond donors whereas recognition of the G‐NH₂ requires an acceptor. The concept that we report herein uses pre‐organized N‐methylbenzimidazole (N‐MeBI) thiophene modules for selective binding with mixed bp DNA sequences. The interaction between the thiophene sigma hole (positive electrostatic potential) and the electron‐donor nitrogen of N‐MeBI preorganizes the conformation for accepting an hydrogen bond from G‐NH₂. The compound–DNA interactions were evaluated with a powerful array of biophysical methods and the results show that N‐MeBI‐thiophene monomer compounds can strongly and selectively recognize single G ? C bp sequences. Replacing the thiophene with other moieties significantly reduces binding affinity and specificity, as predicted by the design concept. These results show that the use of molecular features, such as sigma‐holes, can lead to new approaches for small molecules in biomolecular interactions.     

Selection of DNA Aptamers with Affinity for Pro-gastrin-Releasing Peptide (proGRP), a Tumor Marker for Small Cell Lung Cancer

Aptamers are single-strand oligonucleotides that are generated by the systemic evolution of ligands by exponential enrichment (SELEX) technique and that can bind to target molecules specifically. However, only a few aptamers have been developed to date against tumor markers. To utilize aptamers for tumor diagnosis, a variety of aptamers are required. Here, a single-stranded DNA aptamer specific for pro-gastrin-releasing peptide (proGRP), a marker for small cell lung cancer, was selected using SELEX. After selection, identical sequences were found in the DNA library. This sequence was selected and its binding affinity to proGRP was evaluated using surface plasmon resonance.     

Role of protein structure and the role of individual fingers in zinc finger protein–DNA recognition: a molecular dynamics simulation study and free energy calculations

Molecular dynamics and MM_GBSA energy calculations on various zinc finger proteins containing three and four fingers bound to their target DNA gave insights into the role of each finger in the DNA binding process as part of the protein structure. The wild type Zif 268 (PDB code: 1AAY) gave a ΔG value of ??76.1 (14) kcal/mol. Zinc fingers ZF1, ZF2 and ZF3 were mutated in one experiment and in another experiment one finger was cut and the rest of the protein was studied for binding. The ΔΔG values for the Zinc Finger protein with both ZF1 and ZF2 mutated was +?80 kcal/mol, while mutating only ZF1 the ΔΔG value was +?52 kcal/mol (relative to the wild type). Cutting ZF3 and studying the protein consisting only of ZF1 linked to ZF2 gave a ΔΔG value of +?68 kcal/mol. Upon cutting ZF1, the resulting ZF2 linked to ZF3 protein gave a ΔΔG value of +?41 kcal/mol. The above results shed light on the importance of each finger in the binding process, especially the role of ZF1 as the anchoring finger followed in importance by ZF2 and ZF3. The energy difference between the binding of the wild type protein Zif268 (1AAY) and that for individual finger binding to DNA according to the formula: ΔΔG_{linkers, otherstructuralfactors}?=?ΔG_zif268???(ΔG_F1+F2+F3) gave a value?=???44.5 kcal/mol. This stabilization can be attributed to the contribution of linkers and other structural factors in the intact protein in the DNA binding process. DNA binding energies of variant proteins of the wild type Zif268 which differ in their ZF1 amino acid sequence gave evidence of a good relationship between binding energy and recognition and specificity, this finding confirms the reported vital role of ZF1 in the ZF protein scanning and anchoring to the target DNA sequence. The role of hydrogen bonds in both specific and nonspecific amino acid-DNA contacts is discussed in relation to mutations. The binding energies of variant Zinc Finger proteins confirmed the role of ZF1 in the recognition, specificity and anchoring of the zinc finger protein to DNA.     

硫黄素T与侧翼连接双链DNA的G-四链体高特异性作用

富G碱基的DNA序列在离子诱导下可形成G-四链体(G4),基于这一构型转化设计了大量的传感检测平台。其中的荧光检测平台是基于G4与荧光小分子的相互作用。但是,G4与荧光小分子的有效结合依赖于G4构型和体系中存在的离子种类和离子浓度,尤其是高Na⁺浓度(140 mmol·L^-1)。那么如何实现G4与荧光小分子普适性地有效结合,并不依赖于体系中的Na⁺和Na⁺浓度,是一个难题。在本研究中,以最简单的富G DNA序列凝血酶适体链TBA (thrombin binding aptamer)为例,在3’端和5’端分别增加10个碱基(TBA-10 bp),K⁺诱导TBA-10 bp形成K⁺稳定TBA (K⁺-TBA,G4)并衔接含有10个互补碱基对的双链DNA (K⁺-TBA-10 bp)。相较于K⁺-TBA,硫磺素T与K⁺-TBA-10 bp结合后的荧光强度增加了100倍,相互作用强度增加了1000倍,而且与体系中的Na⁺ (5-140 mmol·L^-1)无关。结合荧光光谱,紫外吸收光谱和圆二色光谱发现硫磺素T特异性的嵌合于K⁺-TBA和双链DNA衔接处的空腔内。有趣的是,这一结合模式不受G4构型的影响。该研究结果为研究G4与荧光小分子的有效结合提供了新视角,也为拓展G4在生物功能和生化检测领域的应用提供了实验依据。     

Enhanced stability of G-quadruplexes from conformationally constrained aep-PNA backbone

Nucleic (DNA) acids having contiguous stretch of G sequence form quadruplex structure, which is very critical to control cell division. Recently the existence of G-quadruplex in RNA is also reported in presence of monovalent metal ion. PNA is a promising DNA analogue which binds strongly to DNA to form PNA:DNA duplex or PNA(2):DNA triplex. PNA also forms quadruplexes such G-quadruplex and i-motif in G and C-rich sequences respectively. aep-PNA containing a prolyl ring is one of several PNA analogues that provide rigidity and chirality in backbone and has binding affinity to natural DNA which is higher than that of PNA. Here we examine the ability of aep-PNA-G to form a quadruplex by UV, CD and mass spectroscopic techniques.     

NMR structural analysis of a modular threading tetraintercalator bound to DNA

The synthesis and NMR structural studies are reported for a modular threading tetraintercalator bound to DNA. The tetraintercalator design is based on 1,4,5,8-tetracarboxylic naphthalene diimide units connected through flexible peptide linkers. Aided by an overall C(2) symmetry, NMR analysis verified a threading polyintercalation mode of binding, with linkers alternating in the order minor groove, major groove, minor groove, analogous to how a snake might climb a ladder. This study represents the first NMR analysis of a threading tetraintercalator and, as such, structurally characterizes a new topology for molecules that bind to relatively long DNA sequences with extensive access to both DNA grooves.     

Sequence‐Specific DNA Alkylation by Tandem Py–Im Polyamide Conjugates

Tandem N‐methylpyrrole? N‐methylimidazole (Py? Im) polyamides with good sequence‐specific DNA‐alkylating activities have been designed and synthesized. Three alkylating tandem Py? Im polyamides with different linkers, which each contained the same moiety for the recognition of a 10 bp DNA sequence, were evaluated for their reactivity and selectivity by DNA alkylation, using high‐resolution denaturing gel electrophoresis. All three conjugates displayed high reactivities for the target sequence. In particular, polyamide 1 , which contained a β‐alanine linker, displayed the most‐selective sequence‐specific alkylation towards the target 10 bp DNA sequence. The tandem Py? Im polyamide conjugates displayed greater sequence‐specific DNA alkylation than conventional hairpin Py? Im polyamide conjugates ( 4 and 5 ). For further research, the design of tandem Py? Im polyamide conjugates could play an important role in targeting specific gene sequences.     

Phagemid encoded small molecules for high throughput screening of chemical libraries

A new strategy for monovalently displaying small molecules on phage surfaces was developed and applied to high throughput screening for molecules with high binding affinity to the target protein. Peptidyl carrier protein (PCP) excised from nonribosomal peptide synthetase was monovalently displayed on the surface of M13 phage as pIII fusion proteins. Small molecules of diverse structures were conjugated to coenzyme A (CoA) and then covalently attached to the phage displayed PCP by Sfp phosphopantetheinyl transferase. Because Sfp is broadly promiscuous for the transfer of small molecule linked phosphopantetheinyl moieties to apo PCP domains, this approach will enable displaying libraries of small molecules on phage surfaces. Unique 20-base-pair (bp) DNA sequences were also incorporated into the phagemid DNA so that each compound displayed on the phage surface was encoded by a DNA bar code encapsulated inside the phage coat protein. Single round selection of phage displayed small molecules achieved more than 2000-fold enrichment of small molecules with nM binding affinity to the target protein. The selection process is further accelerated by the use of DNA decoding arrays for identifying the selected small molecules.     

Mapping Polyamide–DNA Interactions in Human Cells Reveals a New Design Strategy for Effective Targeting of Genomic Sites

Targeting the genome with sequence‐specific synthetic molecules is a major goal at the interface of chemistry, biology, and personalized medicine. Pyrrole/imidazole‐based polyamides can be rationally designed to target specific DNA sequences with exquisite precision in vitro; yet, the biological outcomes are often difficult to interpret using current models of binding energetics. To directly identify the binding sites of polyamides across the genome, we designed, synthesized, and tested polyamide derivatives that enabled covalent crosslinking and localization of polyamide–DNA interaction sites in live human cells. Bioinformatic analysis of the data reveals that clustered binding sites, spanning a broad range of affinities, best predict occupancy in cells. In contrast to the prevailing paradigm of targeting single high‐affinity sites, our results point to a new design principle to deploy polyamides and perhaps other synthetic molecules to effectively target desired genomic sites in vivo.     

Sequence‐Specific DNA Recognition by Cyclic Pyrrole–Imidazole Cysteine‐Derived Polyamide Dimers

Pyrrole–imidazole (PI) polyamides bind to the minor groove of the DNA duplex in a sequence‐specific manner and thus have the potential to regulate gene expression. To date, various types of PI polyamides have been designed as sequence‐specific DNA binding ligands. One of these, cysteine cyclic PI polyamides containing two β‐alanine molecules, were designed to recognize a 7 bp DNA sequence with high binding affinity. In this study, an efficient cyclization reaction between a cysteine and a chloroacetyl residue was used for dimerization in the synthesis of a unit that recognizes symmetrical DNA sequences. To evaluate specific DNA binding properties, dimeric PI polyamide binding was measured by using a surface plasmon resonance (SPR) method. Extending this molecular design, we synthesized a large dimeric PI polyamide that can recognize a 14 bp region in duplex DNA.     

Effect of molecular conformations on the adsorption behavior of gold-binding peptides

Despite extensive recent reports on combinatorially selected inorganic-binding peptides and their bionanotechnological utility as synthesizers and molecular linkers, there is still only limited knowledge about the molecular mechanisms of peptide binding to solid surfaces. There is, therefore, much work that needs to be carried out in terms of both the fundamentals of solid-binding kinetics of peptides and the effects of peptide primary and secondary structures on their recognition and binding to solid materials. Here we discuss the effects of constraints imposed on FliTrx-selected gold-binding peptide molecular structures upon their quantitative gold-binding affinity. We first selected two novel gold-binding peptide (AuBP) sequences using a FliTrx random peptide display library. These were, then, synthesized in two different forms: cyclic (c), reproducing the original FliTrx gold-binding sequence as displayed on bacterial cells, and linear (l) dodecapeptide gold-binding sequences. All four gold-binding peptides were then analyzed for their adsorption behavior using surface plasmon resonance spectroscopy. The peptides exhibit a range of binding affinities to and adsorption kinetics on gold surfaces, with the equilibrium constant, Keq, varying from 2.5x10(6) to 13.5x10(6) M(-1). Both circular dichroism and molecular mechanics/energy minimization studies reveal that each of the four peptides has various degrees of random coil and polyproline type II molecular conformations in solution. We found that AuBP1 retained its molecular conformation in both the c- and l-forms, and this is reflected in having similar adsorption behavior. On the other hand, the c- and l-forms of AuBP2 have different molecular structures, leading to differences in their gold-binding affinities.     

Directed evolution of ATP binding proteins from a zinc finger domain by using mRNA display

Antibodies have traditionally been used for isolating affinity reagents to new molecular targets, but alternative protein scaffolds are increasingly being used for the directed evolution of proteins with novel molecular recognition properties. We have designed a combinatorial library based on the DNA binding domain of the human retinoid-X-receptor (hRXRalpha). We chose this domain because of its small size, stable fold, and two closely juxtaposed recognition loops. We replaced the two loops with segments of random amino acids, and used mRNA display to isolate variants that specifically recognize adenosine triphosphate (ATP), demonstrating a significant alteration of the function of this protein domain from DNA binding to ATP recognition. Many novel independent sequences were recovered with moderate affinity and high specificity for ATP, validating this scaffold for the generation of functional molecules.     

The recognition of a noncanonical RNA base pair by a zinc finger protein.

BACKGROUND: The zinc finger (ZF) is the most abundant nucleic-acid-interacting protein motif. Although the interaction of ZFs with DNA is reasonably well understood, little is known about the RNA-binding mechanism. We investigated RNA binding to ZFs using the Zif268-DNA complex as a model system. Zif268 contains three DNA-binding ZFs; each independently binds a 3 base pair (bp) subsite within a 9 bp recognition sequence. RESULTS: We constructed a library of phage-displayed ZFs by randomizing the alpha helix of the Zif268 central finger. Successful selection of an RNA binder required a noncanonical base pair in the middle of the RNA triplet. Binding of the Zif268 variant to an RNA duplex containing a G.A mismatch (rG.A) is specific for RNA and is dependent on the conformation of the mismatched middle base pair. Modeling and NMR analyses revealed that the rG.A pair adopts a head-to-head configuration that counterbalances the effect of S-puckered riboses in the backbone. We propose that the structure of the rG.A duplex is similar to the DNA in the original Zif268-DNA complex. CONCLUSIONS: It is possible to change the specificity of a ZF from DNA to RNA. The ZF motif can use similar mechanisms in binding both types of nucleic acids. Our strategy allowed us to rationalize the interactions that are possible between a ZF and its RNA substrate. This same strategy can be used to assess the binding specificity of ZFs or other protein motifs for noncanconical RNA base pairs, and should permit the design of proteins that bind specific RNA structures.     

Adsorption behavior of linear and cyclic genetically engineered platinum binding peptides

Recently, phage and cell-surface display libraries have been adapted for genetically selecting short peptides for a variety of inorganic materials. Despite the enormous number of inorganic-binding peptides reported and their bionanotechnological utility as synthesizers and molecular linkers, there is still a limited understanding of molecular mechanisms of peptide recognition of and binding to solid materials. As part of our goal of genetically designing these peptides, understanding the binding kinetics and thermodynamics, and using the peptides as molecular erectors, in this report we discuss molecular structural constraints imposed upon the quantitative binding characteristics of peptides with an affinity for inorganics. Specifically, we use a high-affinity seven amino acid Pt-binding sequence, PTSTGQA, as we reported in earlier studies and build two constructs: one is a Cys-Cys constrained "loop" sequence (CPTSTGQAC) that mimics the domain used in the pIII tail sequence of the phage library construction, and the second is the linear form, a septapeptide, without the loop. Both sequences were analyzed for their adsorption behavior on Pt thin films by surface plasmon resonance (SPR) spectroscopy and for their conformational properties by circular dichroism (CD). We find that the cyclic peptide of the integral Pt-binding sequence possesses single or 1:1 Langmuir adsorption behavior and displays equilibrium and adsorption rate constants that are significantly larger than those obtained for the linear form. Conversely, the linear form exhibits biexponential Langmuir isotherm behavior with slower and weaker binding. Furthermore, the structure of the cyclic version was found to adopt a random coil molecular conformation, whereas the linear version adopts a polyproline type II conformation in equilibrium with the random coil. The 2,2,2-trifluoroethanol titration experiments indicate that TFE has a different effect on the secondary structures of the linear and cyclic versions of the Pt binding sequence. We conclude that the presence of the Cys-Cys restraint affects both the conformation and binding behavior of the integral Pt-binding septapeptide sequence and that the presence or absence of constraints could be used to tune the adsorption and structural features of inorganic binding peptide sequences.     

毛细管电泳结合电喷雾质谱分析人类癌基因c-myb四链体核酸与活性天然产物的相互作用

药物与靶点间的作用关系直接影响到药理和药效。药物-靶点结合能力、结合计量关系等信息是药物研发过程中必需的表征数据。人类癌基因c-myb在结直肠癌等多种癌症组织中存在过度表达,目前已成为结直肠癌、白血病等癌症疾病潜在的治疗靶点。位于癌基因c-myb启动子区的一段富含鸟嘌呤（G）的DNA序列,通过阳离子的诱导可自发折叠形成分子内G-四链体,而小分子的特异性识别可以稳定该G-四链体,进而调节基因的转录和表达过程。该文采用压力辅助毛细管电泳前沿分析（PACE-FA）结合电喷雾质谱（ESI-MS）研究人类癌基因c-myb启动子G-四链体（G4）与天然产物分子间的相互作用。PACE-FA法在毛细管电泳前沿分析（CE-FA）过程中施加一个与分析物迁移同向的压力,在保证结果准确度的前提下,能够大大加快分析速度。同时结合ESI-MS,可快速解析结合分子与靶点的亲合力和化学计量关系。首先,利用ESI-MS快速筛选出3种有亲合力的天然产物,亲合力大小依次为：土荆皮乙酸>丁溴东莨菪碱>荷叶碱。考虑到溶液相中存在特异性与非特异性结合,接着用PACE-FA法准确分析溶液相中结合的特异性和结合常数。结果发现：丁溴东莨菪碱能够特异性结合靶点G4 DNA,结合比为1：1,结合常数为1.18×10⁵ L/mol;荷叶碱属于非特异性结合,而土荆皮乙酸并未与靶点G4 DNA形成复合物。该组合方法不仅分析速度快,而且能够提高亲和分析的准确度和特异性,有望应用于靶向药物先导结构的发现和作用机制评价。