含氟聚酰亚胺波导波长分离耦合器优化设计

提出并采用统计优化的设计方法解决含氟聚酰亚胺波导波长交叉分离耦合器的偏振态变动的影响.在实测了含氟聚酰亚胺的色散和双折射特性的基础上,优化设计了40路波长信道、1550 nm中心波长、0.8 nm波长间隔的抗偏振变动的波长交叉分离耦合器.数值模拟显示:波长周期偏移小于0.1 nm,1 dB带宽为0.5 nm,3 dB带宽为0.8 nm,串扰小于－30 dB,偏振变动导致的波长漂移小于0.08 nm.     

Flattop all-fiber wavelength interleaver for DWDM transmission: Design analysis, parameter optimization, fabrication and characterization recipe

Flattop response within the passband is an important desirable feature of any wavelength selective component that goes into a DWDM optical network. In this paper, we report design and fabrication recipe for realizing wavelength interleavers/slicers with flattop wavelength response, configured around unbalanced all-fiber 2-stage Mach-Zehnder interferometers (MZI). Based on a comprehensive analysis, we have developed a design process/algorithm to determine the optimum splitting ratios as well as the relationship between the splitting ratios of the couplers that constitute the 2-stage MZI, to achieve a flattop wavelength response. The implication of the second delay line with respect to its presence in the upper/lower arm of the second stage of the MZI is highlighted through an algebraic analysis. This revealed that there would be corresponding changes in the optimum splitting ratios of the couplers. These features of our design analysis were then exploited to fabricate a wavelength interleaver with a near box-like response, which validated our algorithm. The polarization dependent losses of the device were measured to be ≈ 0.4 dB. Our analysis and fabrication recipe should be useful in the realization of flattop all-fiber wavelength interleavers for deployment in DWDM networks of high spectral efficiency.     

基于主成分分析法的高性能波长计研究与实现

波长探测作为科学技术中的一个基本工具,在分析化学、生物传感和光学通信等众多领域具有重要作用。从多模光纤信号传输理论出发,在绝热、准直模型中建立基于模式干涉效应的强度干涉图像理论;实验测量时,在光纤尾端引入缓变（斜率约为0.01）锥形区域设计,保证收集到侧面辐射信号的同时,也近似满足理论模型和数值仿真结果。在搭建的显微共焦成像系统中,连续扫描窄带激光器进行干涉图像存储,经过区域选取、向量拼接以及奇异值分解等步骤得到由器件特性决定的校样矩阵。波长的探测过程共分为两个步骤：在工作带宽内纳米量级粗略扫描光波长得到粗略校准矩阵,一维待测信号强度图像与之进行内积相关性运算后,选取数值最高的波长值作为预估波长单元;在此基础上精细扫描得到精细校样矩阵,选取三个最大主成分并定义与波长欧氏距离最小值确定最终探测波长。采用内积相关性运算联合主成分分析法不仅可以将波长探测分辨率提高到20 pm、准确率达到96.7%,探测效率较其他光谱重建算法提高50倍。实验证实该波长计工作范围至少为400～700 nm,器件尺寸仅为π×(20 μm)2×0.5 mm。该器件在高性能、便携式和低成本方面较同类器件有较大提升,在光谱重建效率也集成了高效算法,能够广泛应用于光纤传输系统的波长实时探测。     

Gaussian soliton generation using a 1.3 μm optical pulse in a micro-ring resonator for a new DWDM enhancement

We present a novel system of a Gaussian soliton generation using a 1.30 μm optical pulse in a nonlinear micro-ring resonator system, which can be used to form the soliton pulse trains within the new wavelength band. By using the suitable parameters, the soliton pulse trains with the center wavelength at 1.30 μm can be generated after the intense Gaussian pulse is input into the nonlinear micro-ring resonator system. The initial pulse bandwidth is enlarged and the signal amplified by the nonlinear Kerr effects type within the ring resonator. The simulation values are used associating with the practical device parameters, whereas the obtained results have shown that the wavelength enhancement of the center wavelength can be achieved. Furthermore, the maximum soliton output power of 12 W is obtained, which is available to perform the long-distance communication link. The common problem of soliton dispersion is minimized by the zero dispersion condition in this case. The major advantage of the proposed system is that the dense wavelength division of the center wavelength with the spectral width of 7.0 pm (10⁻¹⁵ m) and the free spectrum range of 400 pm can be generated and achieved. This is available for the used/installed wavelength enhancement, which can provide more available channel capacity in the existed public optical network.     

原子光谱线位移机理的研究

在 0～ 80 0nm光谱范围 ,观察发现了原子光谱线位移与波长、温度、湿度及压力变化之间的非线性函数关系 ,绘制了它们之间的非线性函数关系曲线 ,给出了表达方程式 ;实验证实这些非线性函数关系对不同类型的光谱仪具有普遍适用性。观察发现了原子光谱线半宽度与温度变化之间的非线性函数关系。利用以上发现 ,开发了电感耦合等离子体光谱仪的智能波长校正装置和方法。实践证明 ,该装置和方法能有效地校正波长。     

785nm便携式光栅外腔可调谐半导体激光器的研制和输出特性

针对移频激发拉曼光谱测试系统的小型化需求,在Littrow结构中,采用商用的785nm大功率激光二极管作为增益器件,构建了一款便携式光栅外腔可调谐半导体激光器。该激光器通过采用一种新型的波长调谐方法,即以改变半导体增益器件相对于准直透镜的水平位置来实现波长的连续调谐,实现了尺寸为140mm×65mm×50mm的小型化结构设计。相比于传统的旋转衍射光栅改变光线在光栅上的入射角来实现波长调谐的方式,该方法有效地缩减了增益器件的平移距离,从而有利于便携式外腔激光器波长的快速宽带调谐。实验结果表明,该激光器具有较宽的波长调谐范围,在340~900mA注入电流下均可实现10nm以上的波长调谐,尤其在900mA大注入电流下,其波长调谐覆盖779.40~791.07nm,调谐范围可达11.67nm,且激射线宽小于0.2nm,单波长输出功率最高可达280mW,放大的自发辐射抑制比大于25dB,呈现出较优异的输出性能,满足移频激发拉曼光谱检测系统对光源的基本要求。此外,该激光器可采用一微型压电陶瓷驱动器来实现波长的电动调谐,实验获得了1.35nm的波长调谐范围,证实了所制785nm便携式光栅外腔可调谐半导体激光器适合作为便携式移频激发拉曼光谱检测系统的光源用于减除原始拉曼光谱中的荧光背景。     

Four-channel coarse WDM for inter- and intra-satellite optical communications

A polymer volume grating-based four-channel coarse wavelength division multiplexer (WDM) for inter- and intra-satellite optical communication application is reported for the first time. This compact four-channel WDM device working at 0.83, 1.06, 1.34 and 1.55 μm is designed to build a complete optical link between two satellites, where wavelengths of 0.83 and 1.55 μm are used for data stream channels, 1.06 and 1.34 μm are used for inter- and intra-satellite connection. It is for the first time reported that a WDM device can cover such a large wavelength range in a single substrate. For transverse electric (TE) wave, the channel efficiencies at 0.83, 1.06, 1.34 and 1.55 μm are 55%, 40%, 35% and 45%, respectively. Channel efficiencies for transverse magnetic (TM) waves are 20% lower than those of TE waves on average. Wavelength shifts due to Doppler effect, temperature variations and radiation effects in space can be adequately accommodated.     

用智能波长校正的扫描式ICP光谱仪测定铬铁矿中六种元素成分

本文利用作者所在实研究室开发的扫描式ＩＣＰ光谱仪的智能波长校正装置取代传统的ＩＣＰ光谱仪的局部恒温系统，测定了铬铁矿及铬酸盐中的Ｃｒ，Ｓｉ，Ａｌ，Ｆｅ，Ｍｎ和Ｍｇ六种元素成分。测定结果与铬矿标样的鉴定值基本一致，测量的相对标准偏差（ＲＳＤ）为１．０％，智能波和工校正装置的波长校正结果与谱线峰值描迹结果的比较表明，该智能波长校正装置是有效的，具有省时，安全，结构简单的特点，有广泛的应用的前景。     

Tunable single-longitudinal-mode SOA-based fiber laser based on the spectral narrowing effect in a dispersion-shifted fiber

A tunable single-longitudinal-mode(SLM) semiconductor optical amplifier(SOA)-based fiber laser based on a dispersion-shifted fiber(DSF) is proposed and successfully demonstrated. SLM operation is obtained due to the spectral narrowing effect resulting from inverse four-wave mixing in a DSF. A tunable optical filter performs wavelength selection function. By inserting a length of DSF in the laser cavity, SLM lasing can possibly be obtained when laser oscillation is stably established after traveling through the DSF many roundtrips. Stable tunable SLM oscillation with a signal-to-noise ratio as high as 65 dB over a wavelength range of about 35 nm is achieved experimentally, and each spectral linewidth is less than 6.5 kHz.     

Wavelength assignment for all-to-all broadcast in WRMD WDM linear array and ring

This paper proposes a wavelength assignment method for all-to-all broadcast in wavelength reusable multi-carrier distributed (WRMD) wavelength division multiplexing (WDM) linear array and ring networks with wavelength reuse. An expression on the minimum number of wavelengths required to establish all-to-all broadcast is also derived for the networks. It is observed that one carrier regeneration per wavelength significantly reduces the number of wavelengths compared to that without carrier regeneration. The results also show that regenerating carriers more than once has little effect on the required number of wavelengths.     

Characterization of wavelength interleaving in radio-over-fiber systems employing WDM/SCM

A radio-over-fiber (RoF) distribution system incorporating both sub-carrier multiplexing and wavelength division multiplexing (WDM) technologies is presented. This signal is directly modulated onto three high-speed lasers. Bragg filters are employed at the receiver base station in order to both demultiplex the required optical channel, and ensure that the detected signal is single side band (in order to overcome dispersion limitations of the link). System spectral efficiency is optimised by wavelength interleaving. The channel spacing between the WDM channels is varied and the system performance for different values of channel spacing and spectral efficiencies is investigated. The results show that wavelength interleaving is a reliable technique that could be used to increase the spectral efficiency of RoF systems.     

Compound polarized wavelength filters with a single subwavelength structure

A novel dual functional device that combines functions of polarizing and bandpass filtering together using a single subwavelength structure is proposed. Characteristics of both wavelength filtering and polarizing in the visible wavelength range with two different multi-layer subwavelength structures are investigated. It is found that both filtering and polarizing functions can be realized simultaneously by appropriate design of the substrate, a dielectric layer and a metallic layer system. Dependence of tunable filtering central wavelength on the properties of layered materials and structural dimensions are discussed in detail. Typical optimized multilayer structural parameters are obtained, in which ~ 75% passband transmission with > 30 dB polarization extinction ratio have been achieved simultaneously for three primary color (red, green and blue) filters. The results open new possibilities in designing and fabricating novel multi-functional polarizing and filtering photonic devices using a single subwavelength structure.     

An effective indicator for evaluation of wavelength extending InGaAs photodetector technologies

An effective indicator for the evaluation of wavelength extending InGaAs photodetector and focal plane array technologies is demonstrated. The validity of the indicator has been confirmed using data from different categories including our works. Based on a formula with two meaningful parameters, the indicator could be a practical index for system designers to estimate the performance of wavelength extending InGaAs PDs and FPAs based on the same technology; and a useful criterion for device developers to improve their technology.     

A novel wavelength dispersive device with a dispersive element based on staircase-like straight and parallel arrayed waveguides

We propose a new type of arrayed waveguide grating (AWG) multiplexer/demultiplexer based on modified group refractive index. This device is composed by an array of straight and parallel waveguides of equal length and each waveguide consist of two sections with different width. The length of the two sections are changed from a waveguide to the adjacent one following a linear dependence resulting in a wavelength dispersive waveguide array. An example of the device design for silicon-on-insulator (SOI) platform is provided and numerical simulations have been carried out for various arrayed waveguide parameters. We demonstrate that the group index modification can be used for tailoring device dispersion properties, and that it can also result in new dispersion characteristics predicted numerically not observed in conventional AWGs. Additional advantages are that the demultiplexer does not necessarily require bending waveguide sections as in a conventional AWG (de)multiplexers, and thus yields highly compact devices with potentially very low insertion loss. Channel spacing of 1 nm have been predicted for sub-micron waveguides sizes. In this paper it is also proposed a novel wavefront converter based on waveguide array lens-like element with waveguides broadened sections. Numerical results for different input/output geometries are analized.     

A three-channels WDM based on MMI in photonic crystal

A photonic crystal waveguide coupling structure can be constructed by putting three adjacent photonic crystal waveguides in parallel. Guided mode propagation method is employed to analyze the interference behavior of the approximate solution in such a coupling and the self-image phenomenon in multi-mode waveguides. A three-channel multimode interference wavelength division multiplexing can be obtained. The presented device has a high transmission rate as well as the advantage of multi-wavelength selection, thus it may have a potentially practical application in future photonic integrated circuit.     

A simple integrated ratiometric wavelength monitor based on a directional coupler

A simple integrated ratiometric wavelength-monitoring device based on a single directional coupler (DC) is proposed and designed. To meet the desired spectral response, a computationally fast method is proposed to optimize the separation distance between two waveguides and the interaction length of the DC based on the local supermodes solution. The wavelength discrimination of the designed structure is demonstrated numerically.     

Diode-pumped tunable single-longitudinal-mode Tm,Ho:YAG twisted-mode laser

A diode-end-pumped tunable twisted-mode cavity Tm, Ho:YAG laser with single-longitudinal-mode(SLM)operation is demonstrated in this Letter. The maximal SLM output power is 106 m W with a slope efficiency of 4.86%. The wavelength can be changed from 2090.38 to 2097.32 nm by tuning the angle of an etalon.     

纯钨红外光谱发射率特性研究

光谱发射率是一个重要的热物性参数,在辐射测温、热传输计算等领域有着广泛的应用。钨作为一种重要的金属,关于其光谱发射率的研究报道较少。利用黑体炉、傅里叶红外光谱仪、加热装置和光学系统搭建了一套能量对比法光谱发射率测量装置,该装置能够测量3~20μm的光谱发射率,测量装置的整体不确定度优于5%。利用该装置测量了纯钨在4个温度点(573, 673, 773和873 K)的法向光谱发射率,重点探讨了氧化、温度、波长和加热时间对纯钨光谱发射率的影响。研究结果表明:纯钨在表面未氧化的情况下,光谱发射率在几个温度点的变化规律基本一致,且数值相差较小,而当其表面发生氧化后光谱发射率迅速增加,在某些波长处出现了强烈的振荡。表面未氧化时纯钨的光谱发射率受温度的影响较小,随着温度的增加仅出现微小的增加,但是当表面发生氧化后,随温度的升高而迅速增大。纯钨的光谱发射率整体上随着波长的增加而减小,但是当表面发生氧化后,由于表面氧化膜与钨金属基底发生干涉效应,在4, 9, 12.5和16.5μm处均出现了峰值。在573和673 K,纯钨的光谱发射率随着加热时间的增加无明显变化。然而,随着温度的升高,在773和873 K时,光谱发射率随着加热时间增加而增大,在773 K时光谱发射率随加热时间的增加增幅较大,因为在该温度点,纯钨表面刚开始发生氧化,氧化速率较大,在873 K时光谱发射率随加热时间的增加增幅较为平缓,并且随着加热时间的增长呈现稳定的趋势。综上,纯钨的光谱发射率在温度较低和表面未氧化时较为稳定。随着温度的升高,当表面发生氧化后,光谱发射率迅速增大,并且在多个波长位置出现了强烈的振荡。由此可见,纯钨光谱发射率受温度、波长、加热时间的影响较大,在实际应用过程中,特别是在辐射测温过程中,如果把纯钨的光谱发射率看做常数将会带来较大的测量误差。该研究将进一步丰富钨的光谱发射率数据,并为其在科学研究和应用中提供数据支持。     

单个波长到多个波长的变换实验

报道一种波长变换的新方法.采用此方法不需要任何泵浦光便能够直接将信号光变换成在特定谱宽内的任意多个任意波长的变换光,这对于将来的波分复用光网络提供了较大的方便.此波长变换的原理是利用色散位移光纤的非线性效应产生超连续光谱(SC)信号,由于这种SC信号携带有变换光信号,对这种连续谱进行滤波便能够得到所需要的任意频率的变换信号.此变换方式具有变换频带宽,偏振不敏感的优点。     

Spatial Light Modulator Based on Surface Plasmon Polaritons for Chromatic Display

A spatial light modulator （SLM） based on surface plasmon polaritons （SPPs） that can generate chromatic pattern is demonstrated. The device is composed of a waveguide with a thin silver film and an active material. The simulated results show that the SLM can modulate the intensity of three different wavelengths at the same time and combine a colour picture in the image surface. The SLM also owns the characteristics of high sensitivity, high contrast, fast time response etc. This means that the SLM is promising in the chromatic display.