海藻酸改性的中空SiO2微球的简易制备及应用

以CaCO3为模板,正硅酸四乙酯（TEOS）为硅源,用比较简单的方法制备了中空SiO2;然后将海藻酸钠嫁接在氨基化的中空SiO2表面;再利用海藻酸盐与钙离子的作用,在中空SiO2表面形成一个凝胶化层,制得海藻酸盐凝胶化的中空SiO2微球,粒径为1~2 μm。 采用FTIR、XRD、SEM、TEM和TGA等测试技术对微球进行表征。 此微球成功地用于柔红霉素的载负和缓释,最大载负率和载药量分别为55.6%和27.8%;缓释结果表明,海藻酸盐凝胶化层的存在,能更有效控制柔红霉素缓慢的释放,这种凝胶化载体对药效强、毒性较大的药物有潜在的临床应用前景。     

三元添加剂水溶液体系制备CaCO3空心球

利用原位聚合方法, 通过加入一定量的引发剂使甲基丙烯酸原位聚合, 在三嵌段共聚物(P123)、聚甲基丙烯酸(PMAA)和十二烷基硫酸钠(SDS)的三元添加剂混合溶液体系中成功地制备了CaCO3空心球. 采用扫描电子显微镜(SEM)和X射线粉末衍射(XRD)对合成样品的形貌、结构进行了表征. 结果显示, 方解石CaCO3空心球直径约0.5-2 μm. 空心球壁由直径约25-35 nm的圆形粒子组成, 壁厚约100-300 nm. 利用核鄄壳机理解释了空心球结构的形成过程.     

Bioinspired synthesis of calcium carbonate hollow spheres with a nacre-type laminated microstructure

In this Article, we combine the characters of hyperbranched polymers and the concept of double-hydrophilic block copolymer (DHBC) to design a 3D crystal growth modifier, HPG-COOH. The novel modifier can efficiently control the crystallization of CaCO(3) from amorphous nanoparticles to vaterite hollow spheres by a nonclassical crystallization process. The obtained vaterite hollow spheres have a special puffy dandelion-like appearance; that is, the shell of the hollow spheres is constructed by platelet-like vaterite mesocrystals, perpendicular to the globe surface. The cross-section of the wall of a vaterite hollow sphere is similar to that of nacres in microstructure, in which platelet-like calcium carbonate mesocrystals pile up with one another. These results reveal the topology effect of the crystal growth modifier on biomineralization and the essential role of the nonclassical crystallization for constructing hierarchical microstructures.     

A bio-inspired approach to the synthesis of CaCO3 spherical assemblies in a soluble ternary-additive system

Two different soluble polymers, poly(ethylene glycol) (PEG) and poly(methacrylic acid) (PMAA), with individual functions were successfully employed in combination with a third additive, sodium dodecyl sulfate (SDS), in one system, and spherical assemblies (e.g., hollow spheres) with multiscale constructs of CaCO3 were obtained. The variation of polymer concentration drastically changed both the morphology and polymorph of the produced CaCO3 crystals due to the corresponding transformation of the micelle structure. This study suggests that noncovalent interaction and cooperation between soluble macromolecules play key roles in controlling the growth of biominerals. The results also suggest a novel and facile route toward biomimetic inorganic synthesis.     

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.     

阴离子氨基酸表面活性剂调控碳酸钙的仿生合成

室温下, 在乙醇或乙醇-水混合体系中, 利用氨基酸表面活性剂N-酰基十二烷基肌氨酸钠(Sar)调控合成碳酸钙, 采用SEM, XRD和FTIR等技术表征了反应产物. 在乙醇体系中, 首先形成多面体形状的文石, 然后逐渐转变为圆球状的无定形碳酸钙. 在乙醇-水混合体系中, 合成了花簇状多级结构碳酸钙晶体. 增加N-酰基十二烷基肌氨酸钠的用量有助于形成球霰石结构, 当n(Ca2+)∶n(Sar)=1∶1 时, 得到的花状碳酸钙为球霰石和方解石的混合物, 当n(Ca2+)∶n(Sar)=1∶2 时, 得到纯净的球霰石, 其形貌为大小较均一的单分散的球, 直径约为7 μm; 另外, 当n(Ca2+)∶n(Sar)=1∶1时, 混合溶剂中水和乙醇的体积比由1.5∶1依次增加为7∶3和3∶1时, 碳酸钙晶体的形貌由花状逐渐向球形过渡, 晶体中球霰石和方解石的含量也随之变化, 其中, 当水和醇的体积比为7∶3时, 产物主要为球霰石型晶体.     

Synthesis and Photoluminescence Properties of Uniform Y2O3:Eu3+ Hollow Spheres with Tunable Shell Thickness

Y2O3:Eu3+ hollow spheres were successfully prepared with melamine formaldehyde(MF) spheres as template. The MF spheres played a significant role in directing the formation of the hollow shells which are composed of numerous primary nanoparticles. Furthermore, the shell thickness of these hollow spheres could be readily tailored by adjusting the dosage of MF template. Based on the photoluminescence(PL) investigation, the red emission intensities(613 nm) of these Y2O3:Eu3+ hollow spheres are greatly influenced by their shell thickness and it was found that hollow spheres with thin shell thickness and intact hollow structures permit a better PL performance.     

Fabrication of superhydrophobic surfaces from binary colloidal assembly

In this work, superhydrophobic surfaces were derived from binary colloidal assemblies. CaCO(3)-loaded hydrogel spheres and silica or polystyrene ones were consecutively dip-coated on silicon wafers. The former assemblies were recruited as templates for the latter self-assembly. Due to the hydrophilicity difference between silicon wafers and CaCO(3)-loaded hydrogel spheres, the region selective localization of silica or polystyrene spheres leads to irregular binary structures with a hierarchical roughness. The subsequent modification with low surface energy molecules yields a superhydrophobic surface. The heating treatment may largely enhance the mechanical stability of the resulting binary structures, which allows regeneration of the surface superhydrophobicity, providing a good durability in practice.     

Fabrication of functional hollow carbon spheres with large hollow interior as active colloidal catalysts

In this study,we have established a facile method to synthesize functional hollow carbon spheres with large hollow interior,which can act as active colloidal catalysts.The method includes the following steps:first,hollow polymer spheres with large hollow interior were prepared using sodium oleate as the hollow core generator,and 2,4-dihydroxybenzoic acid and hexamethylene tetramine(HMT) as the polymer precursors under hydrothermal conditions;Fe 3+ or Ag + cations were then introduced into the as-prepared hollow polymer spheres through the carboxyl groups;finally,the hollow polymer spheres can be pseudomorphically converted to hollow carbon spheres during pyrolysis process,meanwhile iron or silver nanoparticles can also be formed in the carbon shell simultaneously.The structures of the obtained functional hollow carbon spheres were characterized by TEM,XRD,and TG.As an example,Ag-doped hollow carbon spheres were used as colloid catalysts which showed high catalytic activity in 4-nitrophenol reduction reaction.     

Sonochemical preparation of hollow nanospheres and hollow nanocrystals

Ceramic hollow spheres of MoS2 and MoO3 were obtained by sonochemical synthesis of MoS2 and MoO3 templated on silica nanoparticles (diameters 50-500 nm) followed by acid etching to remove the silica core. The resulting hollow materials have been characterized by elemental analysis, XPS, SEM, TEM, optical absorption, and hydrodesulfurization (HDS) studies. The TEM studies on the hollow ceramic materials indicate the formation of dispersed free spheres with a hollow core. The hollow materials obtained from thermally treated MoS2/SiO2 (450-700 degrees C) show the formation of layered MoS2 (lattice fringes approximately 6.2 A) with a wall thickness of 6-8 layers. The MoS2 hollow spheres are extremely active catalysts for the HDS of thiophene. Hollow spheres of MoO3 are prepared in a similar fashion. Surprisingly, upon heating, hollow crystals of MoO3 with sharp-edged truncated cubes containing inner voids are formed from the initial spheres.     

α-Fe_2O_3空心球的水热法制备及其对苯酚的吸附性能

以铁氰化钾、磷酸二氢铵等为反应物,采用水热法合成了α-Fe2O3空心球,并用XRD,TEM,FESEM(场发射扫描电镜)、UV-Vis和低温氮吸附脱附对其进行了表征。结果表明,α-Fe2O3空心球直径在200～560nm之间,其BET比表面积为80m2·g-1,平均孔径为8.5nm。考察了反应时间、反应物用量和反应温度等对α-Fe2O3空心球形貌和大小的影响,提出了其可能的形成机理。研究了室温下α-Fe2O3空心球吸附苯酚的性能,吸附达平衡时,其吸附苯酚的量达97mg·g-1。     

Mutifuntional GdPO4:Eu3+ hollow spheres: synthesis and magnetic and luminescent properties

Mondispersed submicrometer GdPO(4):Eu(3+) hollow spheres were synthesized via an effective one-pot hydrothermal process. These hollow spheres have the average diameter of 200 nm, and the shell thickness is about 20 nm. The surface of the spheres consists of a number of nanorods with diameters of about 10 nm and lengths of about 50-80 nm. Both magnetic and luminescent properties of the obtained Eu(3+)-doped GdPO(4) hollow spheres were investigated. The hysteresis plot (M-H) analysis result indicates their paramagnetic property. The fluorescence spectra demonstrate that they emit orange-red color light originated from the (5)D(0) → (7)F(J) transitions of the Eu(3+) ions. Therefore, the obtained GdPO(4) hollow spheres hold promise for encapsulate drugs with controlled release. Moreover, the GdPO(4):Eu(3+) hollow spheres are attributes for bimodal magnetic resonance imaging (MRI)/optical bioimaging labeling.     

新型氧化铝空心球的制备及表征

以胶体碳球为模板, 廉价的硝酸铝为铝源, 成功制备出了新型的大小可控的氧化铝空心球. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、能量扩散X射线(EDX)、X射线粉末衍射(XRD)等手段对合成产品进行了表征, 并考察了不同合成条件对空心球形貌的影响. 实验结果表明, 合成的氧化铝空心球大小均一, 粒径及壁厚均可调节. 在该实验条件下, 硝酸铝浓度及吸附时间的改变对产品结果没有明显的影响, 而吸附温度的改变引起了产品表面光滑度及壁厚的改变.     

A systematic examination of the morphogenesis of calcium carbonate in the presence of a double-hydrophilic block copolymer

In this paper, a systematic study of the influence of various experimental parameters on the morphology and size of CaCO3 crystals after room-temperature crystallization from water in the presence of poly(ethylene glycol)-block-poly(methacrylic acid) (PEG-b-PMAA) is presented. The pH of the solution, the block copolymer concentration, and the ratio [polymer]/[CaCO3] turned out to be important parameters for the morphogenesis of CaCO3, whereas a moderate increase of the ionic strength (0.016 M) had no influence. Depending on the experimental conditions, the crystal morphologies can be tuned from calcite rhombohedra via rods, ellipsoids or dumbbells to spheres. A morphology map is presented which allows the prediction of the crystal morphology from a combination of pH, and CaCO3 and polymer concentration. Morphologies reported in literature for the same system but under different crystallization conditions agree well with the predictions from the morphology map. A closer examination of the growth of polycrystalline macroscopic CaCO3 spheres by TEM and time-resolved dynamic light scattering showed that CaCO3 macrocrystals are formed from strings of aggregated amorphous nanoparticles and then recrystallize as dumbbell-shaped or spherical calcite macrocrystal.     

控制沉淀法制备不同形貌的碳酸钙超细粉

本文报道了一种成功合成了不同形貌的碳酸钙（CaCO3）超细粉的简单方法,可以获得包括链状、片状、棒状、球形、斜方、以及中空球形的超细碳酸钙粉末。产品用粉末X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）进行了表征和检测。文中对影响产品具晶型和形貌的主要因素进行了讨论,以期有助于理解碳酸钙超细粉的成核与生长机理。     

Controllable synthesis and photoluminescence of single-crystalline BaHfO3 hollow micro- and nanospheres

This paper presents a facile hydrothermal route to synthesize monodispersive and single-crystalline BaHfO(3) hollow micro- and nanospheres in a concentrated basic environment. The hollow spheres were size tunable from submicrometer to nanoscale by simply adjusting the base concentration at a suitable temperature. The base concentration played the key role on forming BaHfO(3) hollow spheres. Detailed investigations on base concentration, reaction temperature, and duration indicated that the formation of BaHfO(3) hollow spheres was driven by Ostwald ripening process. Because of the abundance of defects, the as-prepared BaHfO(3) hollow nanospheres exhibited a blue light emission under UV-light excitation at room temperature. Calcination led to the photoluminescence declination due to the decrease of defects.     

Co3O4空心球的简易合成及其电化学性能

通过简易的水热法"一锅"制备了Co3O4空心球。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶变换红外光谱法(FTIR)等对Co3O4的结构和形貌进行了表征。结果表明,产物由Co3O4纳米粒子构成,并形成明显的空心多孔结构。循环伏安法(CV)测试表明,所制得的Co3O4空心球呈现良好的电化学性能。本文同时对Co3O4空心球结构的形成过程和可能的机理进行了分析和讨论。     

空心介孔WO3球的制备及光催化性能

采用喷雾干燥法制备中空偏钨酸铵球,通过调整热处理温度制备空心介孔WO3球。结果表明:具有Keggin结构的[H2W12O40]6-金属簇的破坏温度区间为417~439℃;在热处理温度为500、550℃,仍有少量的铵根和结合水没有分解,除了WO3外,还存在(NH4)0.06WO3(H2O)0.11;当热处理温度在600℃以上时,偏钨酸铵完全分解为WO3;热处理温度为700℃,保温时间为2h,得到空心介孔WO3球。其形成机理为:空心的偏钨酸铵球,在热处理过程中由于各亚晶的位向不一致,各亚晶沿着[002]晶向择优生长,亚晶形成狭长颗粒,从而在空心球表面形成了介孔;但当热处理温度为800℃,保温时间为2 h,晶粒与晶粒之间通过合并而长大,孔道也随之消失;空心介孔WO3球具有良好的光催化效果,500 W高压汞灯照射150 min甲基蓝的降解率为65.9%。     

V2O3空心球的制备及在锂硫电池中的应用

在NH₃辅助下将制备的V₂O₅空心球高温还原为V₂O₃空心球, 并利用透射电子显微镜、 扫描电子显微镜、 X射线衍射和X射线光电子能谱等手段对材料的形貌与结构进行表征. 将V₂O₃空心球与硫机械混合后, 不经过熔融复合直接作为锂硫电池的正极材料. 电化学测试结果显示, 在0.2C倍率下, 电池首次放电比容量达到1375 mA·h/g, 循环100次后放电比容量可以维持在815 mA·h/g; 在1C高倍率下, 电池首次放电比容量为710 mA·h/g, 经过500次循环后, 放电比容量仍能达到530 mA·h/g, 表明V₂O₃空心球的加入能够有效提高锂硫电池的循环性能.     

Regenerable Fe3O4-decorated chitosan/carboxymethyl cellulose hollow spheres for adsorption and catalytic degradation of dyes

Biopolymer hollow spheres have shown great promise for wastewater treatment due to their unique structure and properties. However, challenging issues like low efficiency and poor recyclability still exist for most hollow spheres. In this study, the modification of chitosan/carboxymethyl cellulose (CS/CMC) with Fe₃O₄ nanoparticles for the formation of bifunctional CS/CMC-Fe₃O₄ hybrid hollow spheres were prepared using a facile two stage mixing route, which exhibited excellent adsorption and catalytic degradation of dyes. The removal ability of the synthesized hollow spheres towards acid blue-113 (AB) and reactive orange C-3R (RO) using persulfate oxidation system was greatly improved compared with single adsorption or catalysis. The removal ratio of AB and RO could reach up to 96.2 and 97.5%, respectively. The kinetic process conformed to the quasi-second-order kinetics and the adsorption process was the controlling step of dye removal. In addition, the created hollow spheres showed excellent environmental adaptability and regenerative capability. This study provides a convenient and practical method for catalyst loading on biomass hollow spheres, which has perspective applications in wastewater purification.