Novel Functional Conjugative Hyperbranched Polymers with Aggregation‐Induced Emission: Synthesis Through One‐Pot “A2+B4” Polymerization and Application as Explosive Chemsensors and PLEDs

With the aim to develop new tetraphenylethylene (TPE)‐based conjugated hyperbranched polymer, TPE units, one famous aggregation‐induced emission (AIE) active group, are utilized to construct hyperbranched polymers with three other aromatic blocks, through an “A₂+B₄” approach by using one‐pot Suzuki polycondensation reaction. These three hyperbranched polymers exhibit interesting AIEE behavior and act as explosive chemsensors with high sensitivity both in the nanoparticles and solid states. This is the first report of the AIE activity of the TPE‐based conjugated hyperbranched polymers. Their corresponding PLED devices also demonstrate good performance.     

Franck–Condon Blockade and Aggregation‐Modulated Conductance in Molecular Devices Using Aggregation‐Induced Emission‐Active Molecules

We report an effective modulation of the quantum transport in molecular junctions consisting of aggregation‐induced‐emission(AIE)‐active molecules. Theoretical simulations based on combined density functional theory and rate‐equation method calculations show that the low‐bias conductance of the junction with a single tetraphenylethylene (TPE) molecule can be completely suppressed by strong electron–vibration couplings, that is, the Franck‐Condon blockade effect. It is mainly associated with the low‐energy vibration modes, which is also the origin of the fluorescence quenching of the AIE molecule in solution. We further found that the conductance of the junction can be lifted by restraining the internal motion of the TPE molecule by either methyl substitution on the phenyl group or by aggregation, a mechanism similar to the AIE process. The present work demonstrates the correlation between optical processes of molecules and quantum transport in their junction, and thus opens up a new avenue for the application of AIE‐type molecules in molecular electronics and functional devices.     

Highly Sensitive and Selective Detection of Nitrophenolic Explosives by Using Nanospheres of a Tetraphenylethylene Macrocycle Displaying Aggregation‐Induced Emission

A tetraphenylethylene (TPE) Schiff‐base macrocycle showing an aggregation‐induced emission (AIE) effect has been synthesized, which could aggregate into nanospheres and emit yellow fluorescence in aqueous media. By virtue of its AIE effect, the macrocycle showed a sensitive and selective response to 2,4,6‐trinitrophenol (TNP) and 2,4‐dinitrophenol (DNP) among a number of nitroaromatic compounds, which could be used to detect TNP and DNP at nanomolar levels. Moreover, it exhibited a superamplified quenching effect with DNP but not with TNP, providing a possible means of discriminating these two compounds. In comparison with open‐chain TPE Schiff‐bases, the cavity of the macrocycle is essential for the selectivity for DNP over TNP. In addition, quantitative analyses of both DNP and TNP in real water samples and qualitative detection of these two analytes in the solid state by the macrocycle have been tested. The reliability of the quantitative analysis has been confirmed by HPLC. Our findings demonstrate that the TPE Schiff‐base macrocycle has great potential as an excellent sensor for DNP and TNP.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

Mapping Live Cell Viscosity with an Aggregation‐Induced Emission Fluorogen by Means of Two‐Photon Fluorescence Lifetime Imaging

Intracellular viscosity is a crucial parameter that indicates the functioning of cells. In this work, we demonstrate the utility of TPE‐Cy, a cell‐permeable dye with aggregation‐induced emission (AIE) property, in mapping the viscosity inside live cells. Owing to the AIE characteristics, both the fluorescence intensity and lifetime of this dye are increased along with an increase in viscosity. Fluorescence lifetime imaging of live cells stained with TPE‐Cy reveals that the lifetime in lipid droplets is much shorter than that from the general cytoplasmic region. The loose packing of the lipids in a lipid droplet results in low viscosity and thus shorter lifetime of TPE‐Cy in this region. It demonstrates that the AIE dye could provide good resolution in intracellular viscosity sensing. This is also the first work in which AIE molecules are applied in fluorescence lifetime imaging and intracellular viscosity sensing.     

Multiple Anti‐Counterfeiting Guarantees from a Simple Tetraphenylethylene Derivative – High‐Contrasted and Multi‐State Mechanochromism and Photochromism

Herein the novel tetraphenylethylene (TPE) derivative 1 was designed with an integration of aggregation‐induced emission (AIE), multi‐state mechanochromism and self‐recovery photochromism. The molecule was susceptible to grinding, heating and vapor fuming and showed corresponding transition of its emission colors. The heated powder or single crystal of 1 exhibited reversible photochromism. After a short period of UV irradiation, it showed a bright red color, but recovered to its original white appearance within 1 min. The photochromism is due to the formation of photocyclization intermediates upon UV irradiation, while the eversible mechanochromism is attributed to the weak molecular interactions derived from head‐to‐tail stacking of the molecules. This reversible multi‐state, high‐contrasted and rapid responsive mechanochromic and photochromic property cooperatively provide double enhancement of a multimode guarantee in advanced anti‐counterfeiting.     

White‐Light Electroluminescence with Tetraphenylethylene as Emitting Layer of Aggregation‐Induced Emissions Enhancement

Tetraphenylethylene (TPE) based molecules with easy synthesis, good thermal stability, and especially their aggregation‐induced emissions enhancement (AIEE) effect recently become attractive organic emitting materials due to their potentially practical application in OLEDs. Herein, the AIEE behaviors of tetraphenylethylene dyes (TMTPE and TBTPE) were investigated. Fabricated luminesent device using TMTPE dye as emitting layer displays two strong emitting bands: the blue emission coming from the first‐step aggregation and the yellow emission attributed to the second‐step aggregation. Thus, it can be utilized to fabricate the white‐light OLEDs (WOLEDs) of the single‐emitting‐component. A three‐layer device with the brightness of 1200 cd·m^?2 and current ef?ciency of 0.78 cd·A^?1 emits the close to white light with the CIE coordinates of x=0.333 andy=0.358, when applied voltage from 8–13 V, verifying that the TPE‐based dyes of AIEE effect can be effectively applied in single‐emitting‐component WOLEDs fabrication.     

Dinitriles Bearing AIE‐Active Moieties: Synthesis,E/Z Isomerization,and Fluorescence Properties

Dinitriles bearing aggregation‐induced emission (AIE)‐active moieties [tetraphenylethylene (TPE) or diphenylphenanthrene (DPP)] were prepared. Compounds 4 (TPE‐linked) and 8 (DPP‐linked) showed considerably redshifted emission resulting from their large Stokes shifts and also strong fluorescence in the aggregated and solid states. Pure E and Z stereoisomers of both dinitriles were easily separated, and their isomerization equilibria and fluorescence properties were investigated. In addition to their pronounced AIEE behavior, 4 and 8 also showed various reversible chromic responses to external stimuli, namely, solvato‐, piezo‐, vapo‐, and thermochromism, which make them potential candidates for smart materials.     

Aggregation‐Induced Emission Characteristics of o‐Carborane‐Functionalized Tetraphenylethylene Luminogens: The Influence of Carborane Cages on Photoluminescence

Tetraphenylethylene (TPE)–carborane hybrids are constructed, and the impact of carborane substituents on the aggregation‐induced emission (AIE) characteristics of TPE‐cores has been investigated. When altering the 2‐R‐group on the carborane unit with ‐H, ‐CH₃ or phenyl group, the luminescent quantum yield of the corresponding TPE derivatives can be manipulated from 0.18 to 0.63 in the solid state. The emission color exhibits an obvious 100 nm shift (from blue to yellow).     

Fluorescence Detection of Microcapsule‐Type Self‐Healing,Based on Aggregation‐Induced Emission

An extrinsic self‐healing coating system containing tetraphenylethylene (TPE) in microcapsules was monitored by measuring aggregation‐induced emission (AIE). The core healing agent comprised of methacryloxypropyl‐terminated polydimethylsiloxane, styrene, benzoin isobutyl ether, and TPE was encapsulated in a urea‐formaldehyde shell. The photoluminescence of the healing agent in the microcapsules was measured that the blue emission intensity dramatically increased and the storage modulus also increased up to 10⁵ Pa after the photocuring. These results suggested that this formulation might be useful as a self‐healing material and as an indicator of the self‐healing process due to the dramatic change in fluorescence during photocuring. To examine the ability of the healing agent to repair damage to a coating, a self‐healing coating containing embedded microcapsules was scribed with a razor. As the healing process proceeded, blue light fluorescence emission was observed at the scribed regions. This observation suggested that self‐healing could be monitored using the AIE fluorescence.

     

Hexaphenylbenzene‐Based, π‐Conjugated Snowflake‐Shaped Luminophores: Tunable Aggregation‐Induced Emission Effect and Piezofluorochromism

In this work, two rigid, multiple tetraphenylethene (TPE)‐substituted, π‐conjugated, snowflake‐shaped luminophores BT and BPT were facilely synthesized by using a 6‐fold Suzuki coupling reaction. These molecules are constructed based on the nonplanar structure of propeller‐shaped hexaphenylbenzene (HPB) or benzene as core groups and TPE as end groups. As a result, they reserve the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, both fluorescence quantum yield and piezochromic behavior in the solid state can be tuned or switched by inserting the phenyl bridges through changing the twisting conformation. The more extended structure BPT showed a much stronger AIE effect and higher Φ_F,f in the solid state in comparison with that of BT. Furthermore, an excellent optical waveguide application of these molecules was achieved. However, the revisable piezofluorochromic behavior has only appeared when BT was ground using a pestle and treated with solvent.     

Construction of Bovine Serum Albumin/AIE‐Based Quaternary Complexes for Efficient Gene Transfection

High transfection efficiency and superior cell imaging are required for cationic polymers‐based gene delivery system to afford high therapeutic effect but its high toxicity and unstable cell imaging are easily ignored. In this study, cationic amino poly(glycerol methacrylate) derivative (PGMA‐EDA) is used to incorporate bovine serum albumin (BSA) and aggregation‐induced emission (AIE) molecular (tetraphenylethylene derivatives, TPE) as an efficient carrier for gene transfection and intracellular imaging. The obtained polymer/pDNA‐TPE/BSA (PDTB) quaternary nanoparticles (NPs) not only exhibit efficient gene transfection but also show excellent biocompatibility. After inclusion of TPE/BSA (TB) NPs, BSA promoted dissociation of the complexes upon being protonated and the lipophilic TPE‐reduced endosomal membrane stability, which enhanced endosomal escape of pDNA payload, finally resulting in an excellent gene transfection. On the other hand, less positive surface charge of PDTB NPs than that of the binary PD complexes, as well as the addition of biocompatible BSA, both factors contribute to the improved cell viability. Moreover, the AIE feature of TPE compared to aggregation‐caused quenching character of conventional fluorophores enables the complex with stably tracking the delivery of pDNA into cancer cells. Therefore, the newly developed PDTB complexes may be a promising candidate vector for traceable, safe, and effective gene delivery.     

Tetraphenylethylene Conjugated with a Specific Peptide as a Fluorescence Turn‐On Bioprobe for the Highly Specific Detection and Tracing of Tumor Markers in Live Cancer Cells

Smart molecular probes and flexible methods are attracting remarkable interest for the visualization of cancer‐related biological and chemical events. In this work, a new fluorescence turn‐on probe with dual‐recognition characteristics for the specific imaging of cancer cells is reported. This new bioprobe is rationally designed by linking tetraphenylethylene (TPE), an aggregation‐induced emission (AIE) fluorophore, with the small peptide IHGHHIISVG (referred to as AP2H), a targeting ligand to the broad‐spectrum cancer‐related protein LAPTM4B. The binding of the probe TPE‐AP2H with the target, both in solution and at the cellular level, switches on the fluorescence of TPE because of the inhibition of internal rotations within the TPE framework. Accordingly, this bioprobe allows the real‐time monitoring and subcellular localization of LAPTM4B in cancer cells, with a very high target‐to‐background ratio for the imaging. Furthermore, brighter fluorescence images are detected after incubation of TPE‐AP2H with tumor cells at lower pH values. Thus, this new bioprobe is more advantageous because it can simultaneously target the LAPTM4B protein and sense the characteristic low‐pH environment of tumor cells. In addition, TPE‐AP2H displays high photostability and low cytotoxicity. Therefore, this new bioprobe is promising for the more accurate and reliable imaging of tumor markers in live cancer cells.     

Fluorescent Bioprobes: Structural Matching in the Docking Processes of Aggregation‐Induced Emission Fluorogens on DNA Surfaces

Whereas most conventional DNA probes are flat disklike aromatic molecules, we explored the possibility of developing quadruplex sensors with nonplanar conformations, in particular, the propeller‐shaped tetraphenylethene (TPE) salts with aggregation‐induced emission (AIE) characteristics. 1,1,2,2‐Tetrakis[4‐(2‐triethylammonioethoxy)phenyl]ethene tetrabromide (TPE‐ 1 ) was found to show a specific affinity to a particular quadruplex structure formed by a human telomeric DNA strand in the presence of K⁺ ions, as indicated by the enhanced and bathochromically shifted emission of the AIE fluorogen. Steady‐state and time‐resolved spectral analyses revealed that the specific binding stems from a structural matching between the AIE fluorogen and the DNA strand in the folding process. Computational modeling suggests that the AIE molecule docks on the grooves of the quadruplex surface with the aid of electrostatic attraction. The binding preference of TPE‐ 1 enables it to serve as a bioprobe for direct monitoring of cation‐driven conformational transitions between the quadruplexes of various conformations, a job unachievable by the traditional G‐quadruplex biosensors. Methyl thiazolyl tetrazolium (MTT) assays reveal that TPE‐ 1 is cytocompatible, posing no toxicity to living cells.     

Consideration of Molecular Structure in the Excited State to Design New Luminogens with Aggregation‐Induced Emission

Aggregation‐induced emission (AIE) is a photoluminescence phenomenon in which an AIE luminogen (AIEgen) exhibits intense emission in the aggregated or solid state but only weak or no emission in the solution state. Understanding the mechanism of AIE requires consideration of excited state molecular geometry (for example, a π twist). This Minireview examines the history of AIEgens with a focus on the representative AIEgen, tetraphenylethylene (TPE). The mechanisms of solution‐state quenching are reviewed and the crucial role of excited‐state molecular transformations for AIE is discussed. Finally, recent progress in understanding the relationship between excited state molecular transformations and AIE is overviewed for a range of different AIEgens.     

Fluorescence Turn‐On Sensing of Lectins with Mannose‐Substituted Tetraphenylethenes Based on Aggregation‐Induced Emission

The synthesis of mannose‐substituted tetraphenylethenes (TPEs) and their aggregation‐induced emission (AIE) behavior, induced by interactions with concanavalin A (Con A), are reported. A mixture of the mannose‐TPE conjugates and Con A in a buffer solution displays an intense blue emission on agglutination within a few seconds, which serves as a “turn‐on” fluorescent sensor for lectins. The sensing is also selective: the conjugates act as a sensor for Con A, but do not sense a galactose‐binding lectin, PNA. Con A‐recognition is not affected even in the presence of other proteins in a mixture. The conjugates also exhibit high sensitivity to detect Con A. An increased sensitivity of the conjugates results if mannopyranoside substituents are linked to the TPE‐core unit with a flexible chain and/or when the number of mannose residues increases.     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

Discriminatory Detection of Cysteine and Homocysteine Based on Dialdehyde‐Functionalized Aggregation‐Induced Emission Fluorophores

We demonstrate a concept‐proof work of using fluorescence (FL) “turn‐on” probes for the discriminatory detection of cysteine (Cys) over homocysteine (Hcy). The fluorogens are provided with aggregation‐induced emission (AIE) characteristic and functionalized with two aldehyde‐groups (DMTPS‐ALD and TPE‐ALD). All the detections were carried out in a biocompatible medium (10 mM HEPES buffer and DMSO, pH 7.4). In principle, the formation of thiazinane/thiazolidine through the chemical reaction of aldehydes on the probe molecules and the residue of Cys/Hcy determines the selective recognition of Cys and Hcy over other amino acids and glucose. The FL responses originate from the AIE property of thiazinane/thiazolidine resultants, which have low solubility and precipitate (aggregate) in the detection medium. The discrimination between Cys and Hcy comes from the difference in reaction kinetics of TPE‐ALD/DMTPS‐ALD with Cys and Hcy, thereby the FL responses show different time courses and intensity enhancement. It is worth noting that TPE‐ALD outshined the other two probes in performance with fast response, a high FL enhancement up to 16‐fold, high sensitivity, and good specificity and selectivity. Moreover, its FL response threshold at 250 μM is very close to the lower limit of the normal level of Cys in human plasma, which implies that TPE‐ALD could be applied as a potential indicator of Cys deficiency.     

Synthesis and Design of Aggregation‐Induced Emission Surfactants: Direct Observation of Micelle Transitions and Microemulsion Droplets

The direct visualization of micelle transitions is a long‐standing challenge owing to the intractable aggregation‐caused quenching of light emission in the micelle solution. Herein, we report the synthesis of a surfactant with a tetraphenylethene (TPE) core and aggregation‐induced emission (AIE) characteristics. The transition processes of surfactant micelles and the microemulsion droplets (MEDs) formed by the surfactant with a TPE core were clearly visualized by a high‐contrast fluorescence imaging method. The fluorescence intensity of the MEDs decreased as the size of MEDs increased as a result of weakening of the restriction of intramolecular rotation (RIR). The results of this study deepen our understanding of micelle‐transition processes and provide solid evidence in favor of the hypothesis that the AIE phenomenon has its origin in the RIR of fluorophores in the aggregate state.     

Fluorogenic Thorium Sensors Based on 2,6‐Pyridinedicarboxylic Acid‐Substituted Tetraphenylethenes with Aggregation‐Induced Emission Characteristics

A novel fluorescent sensor based on tetraphenylethene (TPE) modified with 2,6‐pyridinedicarboxylic acid (PDA) that shows aggregation‐induced emission (AIE) characteristics for thorium recognition with remarkable fluoresence enhancement response has been synthesized. This sensor is capable of visually distinguishing Th⁴⁺ among lanthanides, transition metals, and alkali metals under UV light. Th⁴⁺ can be detected by the naked eye at ppb levels owing to the AIE phenomenon. The sensor showed high selectivity for Th⁴⁺ compared to all other metals tested, and this recognition displayed good anti‐interference qualities. This study represents the first application of a AIE fluorescence sensor in actinide metal recognition and it has potential applications in environmental systems for thorium ion detection.