CH2＝CClF hν >•CH＝CClF＋H光解反应的理论研究

采用UHF, CIS和CASSCF方法, 在aug-cc-pvdz基组水平上对CH₂＝CClF  ^hν >•CH＝CClF＋H的光解反应通道及其后续反应作了研究. 计算表明: 分子吸收一个光子后, 在第一电子激发态(S₁)经过一个过渡态解离与Cl原子同侧的C—H键, 这与用CIS方法计算垂直激发得到的π→σ^*_C—H跃迁及其对Frank-Condon点的计算中分子的单占轨道和键电荷密度变化所预测的结果是一致的. 光解产物•CH＝CClF(基态)还可再发生反应, 经过渡态解离C—Cl键或是C—F键.     

Electrochemical characterization of polypyrrole–LiNi<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>O<Subscript>2</Subscript> composite cathode material for aqueous rechargeable lithium batteries

A series of polypyrrole (PPy)–LiNi_1/3Mn_1/3Co_1/3O₂ composite electrodes are formed by physical mixing of polypyrrole with LiNi_1/3Mn_1/3Co_1/3O₂ cathode material. LiNi_1/3Mn_1/3Co_1/3O₂ is synthesized by reaction under autogenic pressure at elevated temperature method. Highly resolved splitting of 006/102 and 108/110 peaks in the XRD pattern provide an evidence to well-ordered layered structure of the compound. The ratios of the intensities of 003 and 104 peaks are found to be >1, which indicate no pronounced mixing of the cation. Cyclic voltammetry and AC impedance studies revealed that the addition of polypyrrole significantly decreases the charge-transfer resistance of LiNi_1/3Mn_1/3Co_1/3O₂ electrodes. The electrochemical reactivity of PPy–LiNi_1/3Mn_1/3Co_1/3O₂ composite electrode is examined during lithium ion insertion and de-insertion by galvanostatic charge–discharge testing; 10 wt.% PPy–LiNi_1/3Mn_1/3Co_1/3O₂ composite electrode exhibits better electrochemical performance by increasing the reaction reversibility and capacity compared to that of the pristine LiNi_1/3Mn_1/3Co_1/3O₂ electrode. The cell with 10 wt.% PPy added cathode shows significant improvement in the electrochemical performance compared with that having pristine cathode. The capacity remains about 70% of the initial value after 50 cycles while for cell with pristine cathode only about 28% of initial capacity remains after 40 cycles.     

p(O2)-stability of LaFe1−xNixO3−δ solid solutions at 1100 °C

LaFe_1−xNi_xO_3−δ (x=0.1−1.0) perovskites were synthesized via citrate route. The p(O₂)-stability of the perovskite phases LaFe_1−xNi_xO_3−δ has been evaluated at 1100 °C based on the results of XRD analysis of powder samples annealed at various p(O₂) and quenched to room temperature. The isothermal LaFeO_3−δ-“LaNiO_3−δ” cross-section of the phase diagram of the La-Fe-Ni-O system has been proposed in the range of oxygen partial pressure −15<log p(O₂)/atm≤0.68. The unit cell parameters of orthorhombic perovskites O-LaFe_1−xNi_xO_3−δ increase with decrease in p(O₂) at fixed composition x. This behavior is explained on the basis of size factor. The decomposition temperatures of rhombohedral phases R-LaFe_1−xNi_xO_3−δ for x=0.7, 0.8, 0.9 and 1.0 in air were determined as 1137, 1086, 1060 and 995 °C, respectively.     

Conductivity and carrier traps in La1−xSrxCo1−zMnzO3−δ (x=0.3; z=0 and 0.25)

Measurements of the equilibrium oxygen content, electrical conductivity and thermopower in the perovskite-like solid solution La_0.7Sr_0.3Co_1-zMn_zO_3−δ (z=0 and 0.25) as a function of the temperature and oxygen partial pressure are used to determine the temperature dependence of the conductivity and thermopower at different values of the oxygen deficiency. A model for a hopping conductor with screened charge disproportionation is applied for the data analysis in combination with trapping reactions of n- and p-type carriers on local oxygen vacancy clusters and manganese cations, respectively. Changes in the ratio of n-type to p-type mobility are due to variations in oxygen vacancy concentration and manganese content, while the energetic parameters governing charge disproportionation of the trivalent cobalt cations and formation of vacancy associates are shown to be essentially invariable. These calculated charge carrier site occupancies are used to model temperature variations of the electrical properties in La_0.7Sr_0.3Co_1−zMn_zO_3−δ in favorable correspondence with experimental observations.     

Ar-S2(B3Σu-→X3Σg-)体系跃迁偶极矩的从头计算

采用多参考组态相互作用方法计算了Ar-S2团簇, 得到了Ar-S2(X3Σg-)与Ar-S2(B3Σu-)的势能曲面; 计算并讨论了Ar原子与S2分子的相对位置R与S2(B3Σu-→X3Σg-)跃迁矩变化的关系; 分析了Ar对S2分子轨道的压缩和诱导偶极矩随R的变化, 以及其在高压脉冲快放电激励S2分子激光器实验中对实现S2分子发光的影响.     

“活性”/控制自由基聚合的研究进展

本文对“活性” 控制自由基聚合的研究进展做了综述, 并讨论了其主要聚合引发体系的应用现状和前景。     

The Synthesis of Lead-Free Ferroelectric Bi<Subscript>1/2</Subscript>Na<Subscript>1/2</Subscript>TiO<Subscript>3</Subscript> Thin Film by Solution-Sol–Gel Method

Bi_1/2Na_1/2TiO₃ (described as BNT) is considered as a promising lead-free ferroelectric material. In this study, BNT sol was synthesized by mixing bismuth oxide and sodium carbonate dissolved in nitric acid and titanium tetraisopropoxide in ethylene glycol, which was called a solution-sol–gel method and very cost-effective synthesis method, while very high-cost metal alkoxides are used as precursors in conventional sol–gel method. FT-IR and Raman analyses indicated that the chemical modification of titanium tetraisopropoxide by glycolic acid or oxalic acid occurred and the synthesis of stable BNT sol was possible. In the results of high temperature X-ray analysis and DTA/TG analyses, the crystallization of BNT was thought to occur at between 500 and 700C following the evaporation of solvent and organics and poly-condensation processes. The main crystal phase of the film was identified as rhombohedral crystal phase of Bi_1/2Na_1/2TiO₃ by XRD and Raman spectroscopy analyses, although a small amount of Bi₄Ti₃O₁₂ existed as a second phase.     

液相OH•, NO3•和SO4•-与二甲基硫反应机理

利用激光闪光光解技术研究了液相二甲基硫(DMS)与OH^•, NO₃^•和SO₄^•-自由基的微观反应机理. 实验结果表明: 在pH 5～9时, OH^•氧化DMS生成DMSOH^•, DMSOH^•会与DMS反应生成(DMS)₂⁺; 而NO₃^•和SO₄^•-;会直接氧化DMS生成DMS^＋, 生成的DMS^＋会与DMS反应生成(DMS)₂⁺.(DMS)₂⁺与氧气的反应很慢, 它的衰减受pH影响较大.     

液相OH•, NO3•和SO4•-与二甲基硫反应机理

利用激光闪光光解技术研究了液相二甲基硫(DMS)与OH^•, NO₃^•和SO₄^•-自由基的微观反应机理. 实验结果表明: 在pH 5～9时, OH^•氧化DMS生成DMSOH^•, DMSOH^•会与DMS反应生成(DMS)₂⁺; 而NO₃^•和SO₄^•-;会直接氧化DMS生成DMS^＋, 生成的DMS^＋会与DMS反应生成(DMS)₂⁺.(DMS)₂⁺与氧气的反应很慢, 它的衰减受pH影响较大.     

Compositional control of electrical transport properties in the new series of defect thiospinels, Ga1−xGexV4S8−δ (0≤x≤1)

A new series of non-stoichiometric sulfides Ga_1−xGe_xV₄S_8−δ (0≤x≤1; δ≤0.23) has been synthesized at high temperatures by heating stoichiometric mixtures of the elements in sealed quartz tubes. The samples have been characterized by powder X-ray diffraction, SQUID magnetometry and electrical transport-property measurements. Structural analysis reveals that a solid solution is formed throughout this composition range, whilst thermogravimetric data reveal sulfur deficiency of up to 2.9% in the quaternary phases. Magnetic measurements suggest that the ferromagnetic behavior of the end-member phase GaV₄S₈ is retained at x≤0.7; samples in this composition range showing a marked increase in magnetization at low temperatures. By contrast Ga_0.25Ge_0.75V₄S_8−δ appears to undergo antiferromagnetic ordering at ca. 15 K. All materials with x≠1 are n-type semiconductors whose resistivity falls by almost six orders of magnitude with decreasing Ga content, whilst the end-member phase GeV₄S_8−δ is a p-type semiconductor. The results demonstrate that the physical properties are determined principally by the degree of electron filling of narrow-band states arising from intracluster V-V interactions.     

Electronic, Magnetic, and Magnetoresistance Properties of the n=2 Ruddlesden-Popper Phases Sr3Fe2−xCoxO7−δ (0.25≤x≤1.75)

A series of oxygen-deficient n=2 Ruddlesden-Popper phases, Sr₃Fe_2−xCo_xO_7−δ (0.25≤x≤1.75), were prepared by solid-state reactions. Temperature-dependent susceptibility and field-dependent magnetization data indicate that for x≥0.25 the dominant magnetic interactions are ferromagnetic. The onset of strong ferromagnetic interactions is evident at ∼200 K, and a transition to a cluster-glass state is observed for all compositions below ∼45 K. The temperature variation of resistivity for all the compounds shows variable-range hopping behavior with two different localization energy scales: one for T<40 K and another for T>80 K. Large negative magnetoresistance (the largest MR ∼−65% for x=0.25) is observed for all phases. The magnetic susceptibility, Mössbauer and X-ray absorption near-edge spectroscopy data indicate that the formal oxidation state of Fe is close to 4+. The key role of d delocalization in the Sr₃Fe_2−xCo_xO_7−δ system is compared to the Sr₃Fe_2−xMn_xO_7−δ series, where d localization dominates the properties.     

Electron/hole and ion transport in La1−xSrxFeO3−δ

The conductivity of the entire solid solution La_1−xSr_xFeO_3−δ, where x=0.2, 0.4, 0.5, 0.7 and 0.9, in the oxygen partial pressure range 10⁻¹⁹-0.5 atm and temperatures between 750°C and 950°C is reported. The partial contributions from different charge carriers and the energetic parameters governing transport of charged species reveal that the lanthanum-strontium ferrites can be characterized as mixed, ion-electron conductors in the low oxygen pressure/high oxygen deficiency limit. The partial contributions to conductivity from oxygen ions, electrons and holes increase with strontium content and attain maximal values at x=0.5. Further increase in doping results in development of oxygen vacancy ordering phenomena and deterioration of conducting properties.     

LaxSr2−xFeyRu1−yO4±δ: a new family of K2NiF4 type oxides

The phases La_xSr_2−xFe_yRu_1−yO_4±δ (x=0.2-0.8; y=0.6-0.9) have been synthesized by solid-state techniques and yield tetragonal structures with I4/mmm symmetry. The oxygen stoichiometry and high-temperature structures have been examined using diffraction techniques and in situ Mössbauer spectroscopy at temperatures up to ∼600°C. Furthermore, new reduced phases that adopt structures with Immm symmetry have been discovered. Unusual coordination numbers have been determined for the most highly reduced samples with square planar coordination evident for the B site cations. The reduced orthorhombic Immm phases were found to readily reoxidize in air to the tetragonal I4/mmm structure at relatively low temperatures of only ∼500°C.     

Investigation on the structural and electrical properties of NdSrNi1−xCrxO4+δ (0.1≤x≤0.9) system

The phases NdSrNi_1−xCr_xO_4+δ (0.1≤x≤0.9) have been synthesized by modified sol-gel method and subsequent annealing at 1250 °C in 1 atm of flowing argon. X-ray diffraction (XRD) analysis and electrical resistivity have been measured at room temperature. Rietveld refinement shows that all compositions with x>0.1 were found to crystallize in the tetragonal K₂NiF₄ type structure in the space group I4/mmm, while for x=0.1, a mixture of two phases with the tetragonal space group I4/mmm and the orthorhombic space group Fmmm. Variations of a and c parameters show a complex behavior with increasing chromium content. It was established that compounds with chromium content less then x≤0.5 are oxygen-deficient, while for x>0.5 the sample are oxygen-overstoichiometric. The NdSrNi_0.5Cr_0.5O_4+δ compound exhibits semiconductive behavior and the electrical transport mechanism agrees with the non-adiabatic small polaron hopping model in the temperature ranges 298-493, 493-573 and 573-703 K separately.     

CH2＝CClF hν >•CH＝CClF＋H光解反应的理论研究

采用UHF, CIS和CASSCF方法, 在aug-cc-pvdz基组水平上对CH₂＝CClF ^hν >•CH＝CClF＋H的光解反应通道及其后续反应作了研究. 计算表明: 分子吸收一个光子后, 在第一电子激发态(S₁)经过一个过渡态解离与Cl原子同侧的C—H键, 这与用CIS方法计算垂直激发得到的π→σ^*_C—H跃迁及其对Frank-Condon点的计算中分子的单占轨道和键电荷密度变化所预测的结果是一致的. 光解产物•CH＝CClF(基态)还可再发生反应, 经过渡态解离C—Cl键或是C—F键.     

Phase stability of La1−xCaxCrO3−δ in oxidizing atmosphere

The chemical stability of perovskite-type La_1−xCa_xCrO_3−δ (x=0.1, 0.2, 0.3) in high oxygen partial pressure, P_O2, was investigated with three methods: thermogravimetry, XRD analysis, and thermodynamic calculation. The second phase, CaCrO₄ was observed by XRD analysis on the powder equilibrated in high P_O2. Thermogravimetry under fixed temperatures sensitively detected the segregation of the second phase in the form of oxygen incorporation, because oxidation of chromium ion accompanies the segregation. The second phase tended to appear in high P_O2 and at low temperature. The single-phase regions of La_1−xCa_xCrO_3−δ obtained from the two experimental methods well agreed with each other. The results of thermodynamic calculation on the assumption of ideality of the solid solution also agreed with the experimental results. These results suggested the sufficient chemical stability of La_1−xCa_xCrO_3−δ in high P_O2 concerning the application to an interconnector of high-temperature solid oxide fuel cells; for example, La_0.7Ca_0.3CrO_3−δ is stable at 1273 K in air.     

“钙”世英雄*

钙是一种与人联系极为密切的碱土金属元素,钙化学性质活泼,化合物众多,是一种在生活、科技各个方面都有应用的元素。介绍了钙单质的发现、制备和物化性质,重点围绕钙及其化合物在建筑和人体生命健康领域的应用和重要性展开。