Manipulation of Electrostatic and Saccharide Linker Interactions in the Design of Efficient Glycopolypeptide‐Based Cholera Toxin Inhibitors

Multivalent, glycopolymer inhibitors designed for the treatment of disease and pathogen infection have shown improvements in binding correlated with general changes in glycopolymer architecture and composition. We have previously demonstrated that control of glycopolypeptide backbone extension and ligand spacing significantly impacts the inhibition of the cholera toxin B subunit pentamer (CT B₅) by these polymers. In the studies reported here, we elucidate the role of backbone charge and linker length in modulating the inhibition event. Peptides of the sequence AXPXG (where X is a positive, neutral or negative amino acid), equipped with the alkyne functionality of propargyl glycine, were designed and synthesized via solid‐phase peptide synthetic methods and glycosylated via Cu(I)‐catalyzed alkyne‐azide cycloaddition reactions. The capacity of the glycopeptides to inhibit the binding of the B₅ subunit of cholera toxin was evaluated. These studies indicated that glycopeptides with a negatively charged backbone show improved inhibition of the binding event relative to the other glycopeptides. In addition, variations in the length of the linker between the peptide and the saccharide ligand also affected the inhibition of CT by the glycopeptides. Our findings suggest that, apart from appropriate saccharide spacing and polypeptide chain extension, saccharide linker conformation and the systematic placement of charges on the polypeptide backbone are also significant variables that can be tuned to improve the inhibitory potencies of glycopolypeptide‐based multivalent inhibitors.

     

Orientated glyco-macroligand formation based on site-specific immobilization of O-cyanate chain-end functionalized glycopolymer

We report an oriented glyco-macroligand formation and its glyco-affinity capturing and glycoarray application by combining an O-cyanate chain-end functionalized glycopolymer with commercially available amine-functionalized silica gel and glass slides via isourea bond formation. The O-cyanate chain-end functionalized glycopolymer was synthesized via cyanoxyl-mediated free-radical polymerization (CMFRP) in a one-pot fashion. The oriented glyco-macroligand formation was conducted under mild aqueous conditions at room temperature and was confirmed with fluorescence imaging after specific lectin binding, and will find important biomedical applications such as in biosensors and glycoarrays. In addition, the O-cyanate chain-end functionalized glycopolymer can also be used for site-specific polymer-protein conjugation.     

Synthesis of a new smart temperature responsive glycopolymer via click-polymerisation

A novel temperature responsive water-soluble glycopolymer was synthesised via copper wire-catalysed click-polymerisation. Di-hydroxyl terminated poly(ethylene glycol) was quantitatively alkyne end-capped to yield di-alkyne terminated poly(ethylene glycol) (DAT-PEG). 2,3,4,2′,3′,4′-hexa-O-acetyl-6,6′-diazido-6,6′-dideoxy-α,α-D-trehalose (HADADT) was prepared from the di hydrated α,α-D-Trehalose by tosylation/acetylation followed by azidation. Click-polymerisation reaction between DAT-PEG and HADADT was successfully carried out to produce an alternating glycopolymer with triazole rings as linkers in high yield. All the intermediates as well as the glycopolymer were fully characterised by NMR, MS, IR, SEC, TGA and DSC. The cloud point of the aqueous solution of glycopolymer was investigated by optical microscopy and UV–vis spectroscopy. The LCST was found to be within physiological range of about 39 °C, known as fever temperature.     

Glyco-macroligand microarray with controlled orientation and glycan density

We report a new type of glycan microarray, namely, oriented and density-controlled glyco-macroligand microarray based on end-point immobilization of glycopolymer that was accompanied with boronic acid (BA) ligands in different sizes as detachable "temporary molecular spacers". Briefly, an O-cyanate chain-end functionalized lactose-containing glycopolymer was pre-complexed with polyacrylamide-BA, lysozyme-BA, and bovine serum albumin (BSA)-BA conjugates as macromolecular spacers first and then immobilized onto an amine-functionalized glass slide via isourea bond formation both at pH 10.3, respectively. Subsequently, the macromolecular spacers were detached from the immobilized glycopolymers at pH 7.4 so as to afford the oriented and density controlled glycopolymer microarrays. The spaced glycopolymer microarray showed enhanced lectin (Arachis hypogaea) binding compared to a non-spaced one. Among them, the polyacrylamide-BA spaced glycopolymer showed the highest level of lectin binding compared to lysozyme-BA- and BSA-BA-spaced glycopolymers. Furthermore, SPR results confirmed the same trend of density-dependent lectin binding as the glycoarray. This glyco-macroligand microarray platform permits variations of glycan density in the polymer, glycopolymer density and its orientation on the microarray surface and thus will provide a versatile tool for profiling glycan recognition for both basic biological research and practical applications.     

Biodegradable and biomimetic poly(epsilon-caprolactone)/poly(lactobionamidoethyl methacrylate) biohybrids: synthesis, lactose-installed nanoparticles and recognition properties

Biodegradable and biomimetic SPCL-PLAMA biohybrids were synthesized via ATRP and characterized by FT-IR, (1)H NMR, GPC and DSC. Biohybrids with small PDI were obtained, and the block length of the PLAMA glycopolymer could be varied linearly by the varying the molar ratio of glycomonomer to macroinitiator. The outer PLAMA glycopolymer restrained the crystallization of inner PCL segments. The self-assembly properties of amphiphilic biohybrids were studied. Lactose-installed aggregates were fabricated in aqueous solution; they changed from spherical micelles to vesicles with increasing weight fraction of hydrophobic PCL. The SPCL-PLAMA biohybrids showed specific recognition for RCA(120) lectin.     

原子转移自由基聚合法制备新型亲水开管毛细管柱及在毛细管电色谱上的应用

为了增加开管毛细管柱(OTCC)的相比,提高分离效率,发展了表面引发原子转移自由基聚合法(SI-ATRP)制备葡萄糖聚合物修饰的开管毛细管柱。通过扫描电镜观察,该开管柱内壁上修饰了三维波浪状聚合物,明显增加了内壁比表面积和相比。在pH 3~11范围内,对含糖聚合物修饰的开管柱和空柱的电渗流进行了比较。修饰后开管柱的电渗流仅为空柱的1/2~1/3,且在pH 6~11范围内保持平稳。稳定的电渗流保证了分离的重复性和稳定性。用该开管毛细管柱成功实现了小分子混合物(苯丙氨酸、胸腺嘧啶、腺苷、鸟苷、5-溴尿嘧啶、水杨酸)以及蛋白质大分子(核糖核酸酶B、转铁蛋白和牛血清白蛋白)的有效分离,结果表明葡萄糖聚合物修饰的开管毛细管柱具有良好的重复性和稳定性。     

Supramolecular and biomimetic polypseudorotaxane/glycopolymer biohybrids: synthesis, glucose-surfaced nanoparticles, and recognition with lectin

A new class of supramolecular and biomimetic glycopolymer/poly(epsilon-caprolactone)-based polypseudorotaxane/glycopolymer triblock copolymers (poly(D-gluconamidoethyl methacrylate)-PPR-poly(D-gluconamidoethyl methacrylate), PGAMA-PPR-PGAMA), exhibiting controlled molecular weights and low polydispersities, was synthesized by the combination of ring-opening polymerization of epsilon-caprolactone, supramolecular inclusion reaction, and direct atom transfer radical polymerization (ATRP) of unprotected D-gluconamidoethyl methacrylate (GAMA) glycomonomer. The PPR macroinitiator for ATRP was prepared by the inclusion complexation of biodegradable poly(epsilon-caprolactone) (PCL) with alpha-cyclodextrin (alpha-CD), in which the crystalline PCL segments were included into the hydrophobic alpha-CD cavities and their crystallization was completely suppressed. Moreover, the self-assembled aggregates from these triblock copolymers have a hydrophilic glycopolymer shell and an oligosaccharide threaded polypseudorotaxane core, which changed from spherical micelles to vesicles with the decreasing weight fraction of glycopolymer segments. Furthermore, it was demonstrated that these triblock copolymers had specific biomolecular recognition with concanavalin A (Con A) in comparison with bovine serum albumin (BSA). To the best of our knowledge, this is the first report that describes the synthesis of supramolecular and biomimetic polypseudorotaxane/glycopolymer biohybrids and the fabrication of glucose-shelled and oligosaccharide-threaded polypseudorotaxane-cored aggregates. This hopefully provides a platform for targeted drug delivery and for studying the biomolecular recognition between sugar and lectin.     

Amphiphilic block glycopolymers via atom transfer radical polymerization: Synthesis,self‐assembly and biomolecular recognition

In this work the synthesis of poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PBA‐b‐PHEMAGl) diblock glycopolymer and poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate)‐b‐poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PHEMAGl‐b‐PBA‐b‐PHEMAGl) was performed via atom transfer radical polymerization. Monofunctional and difunctional poly(butyl acrylate) macroinitiators were used to synthesize the well‐defined diblock and triblock glycopolymers by chain extension reaction with the glycomonomer HEMAGl. The self‐assembly of these glycopolymers in aqueous solution was studied by dynamic light scattering and transmission electron microcopy, showing the coexistence of spherical micelles and polymeric vesicles. In addition, the biomolecular recognition capacity of these micelles and vesicles, containing glucose moieties in their coronas, was investigated using the lectin Concanavalin A, Canavalia Ensiformis, which specifically interacts with glucose groups. The binding capacity of Concanavalin A with glycopolymer is influenced by the copolymer composition, increasing with the length of HEMAGl glycopolymer segment in the block copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Glycopolymers Mimicking GM1 Gangliosides: Cooperativity of Galactose and Neuraminic Acid for Cholera Toxin Recognition

Glycopolymers mimicking GM1 gangliosides were synthesized by incorporating multiple types of carbohydrates into the polymer backbone. The glycopolymers were immobilized onto gold surfaces, and the interactions with the cholera toxin B subunit (CTB) were analyzed using surface plasmon resonance imaging. The glycopolymer containing both galactose and neuraminic acid showed enhanced recognition of CTB. The interaction was enhanced mainly because of an improvement in the dissociation process by the binding of the neuraminic acid group in the GM1 binding pocket. This cooperativity of galactose and neuraminic acid was achieved by incorporation into the same flexible polymer backbone, and the importance of the close placement of galactose and neuraminic acid groups was revealed. These results will be valuable in medical fields and also for the development of biofunctional materials.     

Glycopolymer-grafted polystyrene nanospheres

The synthesis and characterization of spherical sugar-containing polymer brushes consisting of PS cores onto which chains of sugar-containing polymers have been grafted via two different techniques are described. Photopolymerization in aqueous dispersion using the functional monomer MAGlc and crosslinked or non-crosslinked PS particles covered with a thin layer of photo-initiator yielded homogeneous glycopolymer brushes attached to spherical PS cores. As an alternative, ATRP was used to graft poly-(N-acetylglucosamine) arms from crosslinked PS cores. Deprotection of the grafted brushes led to water-soluble particles that act as carriers for catalytically active gold nanoparticles. These glycopolymer chains show a high affinity to adsorb WGA whereas no binding to BSA or PNA could be detected.     

Synthesis and properties of a well‐defined glycopolymer via living radical polymerization

A well‐defined glycopolymer was synthesized to investigate its properties. The glycopolymer was obtained with a narrow polydispersity by nitroxide‐mediated radical polymerization of styrene carrying acetylated lactose and by the subsequent deprotection. The cylindrical structure and helical conformation of the polymer were measured by circular dichroism (CD) spectra. The affinities of the polymers towards lectins depended on the degree of polymerization (DP), and the polymers with higher DP showed stronger affinity. Copyright © 2007 John Wiley & Sons, Ltd.     

Glyco-Modification of Protein With O-Cyanate Chain-End Functionalized Glycopolymer via Isourea Bond Formation

Glycoengineering aimed at the addition of carbohydrates to proteins is an attractive approach to alter the pharmacokinetic properties of proteins, such as enhancing stability and prolonging the duration of action. We report a novel protein glyco-modification of BSA and recombinant thrombomodulin with O-cyanate chain-end functionalized glycopolymer via isourea bond formation. The protein glycoconjugates were confirmed by SDS-PAGE, western blot, and MALDI-TOF mass spectrometry. Protein C activation activity of the glyco-modified recombinant thrombomodulin was confirmed, proving no interference with activity from the glycopolymer modification. The isourea bond formation under mild conditions was demonstrated as an alternative method for protein modification with polymers.     

原子转移自由基法一锅合成具有pH响应性的新型糖聚合物

本文利用原子转移自由基聚合法(ATRP),通过连续投料法在室温下一步合成了具有pH响应性质的糖聚合物,并且简单地通过控制甲基丙烯酸-2-二甲氨基乙酯(DMAEMA)、甲基丙烯酸-2-二乙氨基乙酯(DEAEMA)单体投料比即实现了对糖聚合物胶束的临界pH转变点在人体生理pH值附近的调节,这对于设计新型的药物控释系统具有重要意义.此外,糖聚合物中的P(DMAEMA-co-DEAEMA)嵌段在一定条件下为带正电荷的聚电解质.因此,本文中合成的糖聚合物不但可以用作传统憎水药物的载体,还可望成为带有负电荷的新型药物例如单链DNA(ssDNA) 等的载体.     

A facile approach to prepare hybrid nanoparticles with morphology controlled by the thickness of glyco-shell

Herein, we designed a novel amphiphilic triblock glycopolymer poly(oligo(ethyleneglycol) methacrylate)-block-poly(maltopyranoside methacrylate)-block-polystyrene(POMA-b-PMal-b-PS) via the combination of reversible addition-fragmentation chain transfer(RAFT) polymerization and postpolymerization modification. The micelles with core–shell–corona structures were prepared by direct self-assembly of this glycopolymer in water. We found that these micelles can be used in in situ formation and stabilization of Au NPs. By controlling the thickness of glyco-shell, we successfully obtained Janus particles and raspberry-like particles with Au NPs in the sugar shell.     

Novel sequence for generating glycopolymer tethered on a membrane surface

Cell surface carbohydrates, usually binding with other biomacromolecules (such as lipids and proteins), are involved in numerous biological functions, including cellular recognition, adhesion, cell growth regulation, and inflammation. Synthetic carbohydrate-based polymers, so-called glycopolymers, are emerging as important well-defined tools for investigating carbohydrate-based biological processes and for simulating various functions of carbohydrates. In this study, a novel two-step sequence for the generation of a glycopolymer layer tethered on a polypropylene microporous membrane is described. First, a UV-induced graft polymerization of 2-aminoethyl methacrylate hydrochloride (AEMA) was carried out on the membrane to generate an amino-functionalized surface, and the effects of polymerization factors (monomer/initiator concentration and UV irradiation time) on the grafting density were studied. Second, sugar moieties were bound with the grafted functional layer to form glycopolymer by the reaction between the amino groups on the membrane surface and carbohydrate lactones. Chemical analysis by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy combined with surface morphology observation by scanning electron microscopy confirmed the graft polymerization of AEMA and the formation of glycopolymer. The decreases of water contact angle and protein adsorption on the membrane revealed the enhancement of hydrophilicity and protein resistance due to the typical characteristics of the glycopolymer tethered on the surface. These results indicated that the novel sequence reported in this work is a facile process to form glycopolymer-modified surfaces.     

INTERACTION BETWEEN THE SURFACE GLYCOSYLATED POLYPROPYLENE MEMBRANE AND LECTIN

A glycopolymer bearing glucose residues was tethered onto the surface of polypropylene microporous membrane by UV-induced graft polymerization ofα-allyl glucoside.Concanavalin A (Con A),a glucose recognizing lectin,could be specifically adsorbed to the membrane surface.On the other hand,the membrane surface showed no recognition ability to another lectin peanut agglutinin.Moreover,the recognition complex between the glycosylated membrane surface and Con A could be inhibited by glucose and mannose solutio...     

Star‐shaped polypeptide/glycopolymer biohybrids: Synthesis,self‐assembly,biomolecular recognition,and controlled drug release behavior

Star‐shaped polypeptide/glycopolymer biohybrids composed of poly(γ‐ benzyl L ‐glutamate) and poly(D ‐gluconamidoethyl methacrylate), exhibiting controlled molecular weights and low polydispersities, were synthesized by the combination of ring‐opening polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride and the direct atom transfer radical polymerization of unprotected D ‐gluconamidoethyl methacrylate glycomonomer. These biohybrids were characterized in detail by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, and wide angle X‐ray diffraction. Independent of weight fraction of hydrophilic glycopolymer segment, the biohybrids self‐assembled into large spherical micelles in aqueous solution, which had a helical polypeptide core surrounded by a multivalent glycopolymer shell. The deprotected poly(L ‐glutamate)/glycopolymer hybrid exhibited a pH‐sensitive self‐assembly behavior, and the average size of the nanoparticles decreased gradually over the aqueous pH value. Moreover, whatever these biohybrids existed in unimolecular level or glycopolymer‐surfaced nanoparticles, they had specific biomolecular recognition with Concanavalin A compared with bovine serum albumin. Furthermore, star‐shaped biohybrids showed a higher doxorubicin loading efficiency and longer drug‐release time than linear analogues. This potentially provides a platform for fabricating targeted anticancer drug delivery system and studying glycoprotein functions in vitro. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2009–2023, 2009     

Synthetic construction of a Le determinant via gabriel amine synthesis and the glycopolymer involving highly clustered Le residues

Synthetic construction of a Le^x determinant was accomplished via slightly modified Gabriel amine synthesis from three building blocks. Further transformations followed by polymerization of the Le^x derivative gave a glycopolymer having trisaccharidic units as pendant-type epitopes.     

Glycopolymer Brushes for Specific Lectin Binding by Controlled Multivalent Presentation of N‐Acetyllactosamine Glycan Oligomers

A new multivalent glycopolymer platform for lectin recognition is introduced in this work by combining the controlled growth of glycopolymer brushes with highly specific glycosylation reactions. Glycopolymer brushes, synthetic polymers with pendant saccharides, are prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP) of 2‐O‐(N‐acetyl‐β‐d ‐glucosamine)ethyl methacrylate (GlcNAcEMA). Here, the fabrication of multivalent glycopolymers consisting of poly(GlcNAcEMA) is reported with additional biocatalytic elongation of the glycans directly on the silicon substrate by specific glycosylation using recombinant glycosyltransferases. The bioactivity of the surface‐grafted glycans is investigated by fluorescence‐linked lectin assay. Due to the multivalency of glycan ligands, the glycopolymer brushes show very selective, specific, and strong interactions with lectins. The multiarrays of the glycopolymer brushes have a large potential as a screening device to define optimal‐binding environments of specific lectins or as new simplified diagnostic tools for the detection of cancer‐related lectins in blood serum.

     

Novel photoinduced grafting-chemical reaction sequence for the construction of a glycosylation surface

Carbohydrates play a major role in many recognition events, such as blood coagulation, immune response, fertilization, cell growth, embryogenesis, and cellular signal transfer, which are essential for the survival of living entities. Synthetic carbohydrate-based polymers, so-called glycopolymers, are emerging as important well-defined tools for investigating carbohydrate-based biological processes and for simulating various functions of carbohydrates. In this work, we present a facile strategy for the formation of glycopolymer tethered on polypropylene microporous membrane surface. Acrylamide was grafted onto the polypropylene microporous membrane surface by photoinduced graft polymerization in the presence of benzophenone. The amide groups of grafted poly(acrylamide) were then transformed to primary amine groups by the Hofmann rearrangement reaction. Quantificational evaluation of the rearrangement reaction was carried out by ninhydrin method and mass weighting. Sugar moieties were coupled with the grafted functional layer to form glycopolymer by the reaction between primary amine groups and carbohydrate lactones. The grafting of acrylamide, the conversion of amide groups to amine groups, and the coupling of sugar moieties were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy combined with surface morphology observation by scanning electron microscopy.