首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 218 毫秒
1.
By considering that the temperature of the end of the thermal effect and the return of the thermal curve to the baseline do not coincide new calculation methods for the thermal effect become possible. Both the integral value of the thermal effect and its distribution over temperature may be calculated by processing only that part of the DTA curve which corresponds to the temperature interval of the transformation.It is demonstrated on the examples of non-variant transformation and transformation with an even distribution of the thermal effect over the temperature interval of the transformation that, under certain assumptions, the values of the thermal effect calculated by the suggested method and by the area of the peak are identical.
Zusammenfassung Bei Berücksichtigung, daß die Temperatur des Endes des thermischen Effekts und die Rückkehr der thermischen Kurve zur Grundlinie nicht zusammenfallen, werden neue Methoden zur Berechnung des thermischen erschlossen. Sowohl der Integralwert des thermischen Effekts, als auch seine Verteilung in dem Temperaturbereich können durch Behandlung ausschließlich desjenigen Teils der DTA-Kurve berechnet werden, welcher dem Temperaturbereich der Umwandlung entspricht.Anhand von Beispielen der nicht-varianten Transformation und der Transformation mit gleichmäßiger Verteilung des thermischen Effekts im Temperaturbereich der Umwandlung wurde gezeigt, daß — unter gewissen Voraussetzungen — die Werte des durch die vorgeschlagene Methode und des aus der Peakfläche berechneten thermischen Effekts identisch sind.

Résumé En considérant le fait que la température de la fin de l'effet thermique et le retour à la ligne de base de la courbe ATD ne coïncident pas, on a développé de nouvelles méthodes du calcul de l'effet thermique. La valeur intégrale de l'effet thermique ainsi que sa distribution dans l'intervalle de températures peuvent être calculées en ne considérant que la partie de la courbe ATD qui correspond à l'intervalle de température de la transformation.A l'aide d'exemples de transformations invariantes et de transformations à distribution uniforme de l'effet thermique dans l'intervalle de températures de la transformation, on a montré qu'avec certaines hypothèses, les valeurs de l'effet thermique calculées par la méthode proposée et à partir des surfaces des pics, sont identiques.

. , -, . , , .
  相似文献   

2.
Interaction of NO with NiCr2O4 has been studied at 473–1173 K. It has been established that on nickel-chromium spinels NO decomposition practically does not take place. Nitric oxide can interact only with prereduced samples to reoxidize them.
473–1173 NO NiCr2O4. , NO . (II) ; .
  相似文献   

3.
The catalytic reduction of nitrogen oxides (NO, N2O and NO2) by carbon monoxide over NiO has been studied in the temperature range from 200 to 500°C. The reaction of NO2 with CO is much faster than that of NO with CO. The former reaction in the presence of a 3–4-fold excess of oxygen proceeds at a significant rate. In the temperature range studied, NO2 decomposes to N2 and O2.
200–500°C (NO, N2O NO2) NiO. NO2 CO NO CO. NO2 CO 3–4- . NO2 N2 O2.
  相似文献   

4.
The rate constants for Br(2P1/2) and Br(2P3/2) atoms in the reaction Br+CH3FHBr+CH2F in photobromination of CH3F have been determined. Their ratio is 10–(2.6±0.5) exp(10100±1000/RT) in the temperature range of 60–200 °C.
Br(2P1/2) Br(2P3/2) Br+CH3FHBr+CH2F CH3F. 60–200 °C 10–(2,6±0,5) exp (10100±1000/RT).
  相似文献   

5.
The thermal behaviour of the solvates and mixed solvates in the LiCl(MgCl2, AlCl3)-water-1,4-dioxane systems was investigated by means of DTA measurements of the melting behaviour and by quasi-isothermal and quasi-isobaric investigations of the thermal decomposition processes.The compounds melt incongruently. The positions of the melting points and the processes of thermal decomposition confirm the assumption that 1,4-dioxane is bonded in the first coordination sphere in the mixed solvate of lithium, but in the cases of magnesium and aluminium chloride it is bonded via hydrogen-bonds and not directly to the cations. Only for the lithium and magnesium compounds does the decomposition of the anhydrous solvates result in anhydrous chlorides.
Zusammenfassung Das thermische Verhalten der Solvate und Mischsolvate der Systeme LiCl, (MgCl2, AlCl3)-Wasser-1,4 Dioxan wurde mit Hilfe von DTA-Messungen zum Schmelzverhalten, und quasi-isothermen und quasi-isobaren Untersuchungen zum Ablauf der thermischen Zersetzung Untersucht. Die Verbindungen schmelzen inkongruent. Die Lage der Schmelzpunkte und der Verlauf der thermischen Zersetzung bekräftigen die Vorstellungen, daß 1,4 Dioxan im Mischsolvat des Lithiums in der ersten Koordinationsphäre direkt am Kation, hingegen bei Magnesium und Aluminium über Wasserstoffbrücken gebunden ist. Die Zersetzung der wasserfreien Solvate führt nur im Fall der Lithium- und Magnesiumverbindungen zu den wasserfreien Chloriden.

( , )--1,4- , - - — . . , 1,4- . , , . .


The valuable assistance of Dr. Frahghänel in the separation of the solid phase by means of the hightemperature centrifuge is gratefully acknowledged.  相似文献   

6.
    
- Cr2O3 .
The selectivity and stability of nickel zeolite catalysis in toluene disproportionation is enhanced by the addition of small amounts of Cr2O3 to the active component prior to thermal treatment in hydrogen.
  相似文献   

7.
A cross-linked dextranomer, which is used as a wound drying and cleansing powder (CrupodexR), has been investigated by several thermoanalytical methods. First the TG, DTG and DTA characteristics were studied and compared with those of another product (DebrisanR), marketed earlier. The TG curves were also used for the examination of water uptake and the drying process. The traces of organic solvents (mainly ethanol) remaining from the manufacturing process were studied with a quadrupole mass-spectrometer coupled to a derivatograph. From the results of these experiments, several conclusions were drawn about the mechanism of water and solvent uptake.
Zusammenfassung CrupodexR-Puder, ein vernetztes Dextranomer zum Trocknen und Säubern von Wunden, wurde mittels einiger thermoanalytischer Methoden untersucht. Zuerst wurden die TG, DTG und DTA Charakteristiken betrachtet und mit denen eines schon früher auf den markt gekommenen Produktes (DebrisanR) verglichen. Die TG-Kurven wurden auch zur Untersuchung der Wasseraufnahme- und Trocknungsprozesse verwendet. Aus dem Produktionsprozeß verbliebene Lösungsmittelreste — hauptsächlich Ethanol — wurden mit einer Instrumentenanordnung Quadrupolmassenspektrometer-Derivatograph bestimmt. Mittels dieser Ergebnisse konnten einige Schlußfolgerungen betreffs des Mechanismus der Wasser- und Lösungsmittelaufnahme getroffen werden.

(), . , , . . , , , -, . , .
  相似文献   

8.
Thermogravimetry and simultaneous DTA were used to investigate the phenomena of adsorption, desorption and surface reactions on solid catalysts. The measurements were carried out with NaX and X-type ion-exchanged zeolites and silica-alumina gels (Ketjen) treated with sodium hydroxide in the presence of carbon dioxide. On the basis of the quantitative results it is possible to give an interpretation of the surface phenomena and to establish the existence of various active centres on the surfaces of the catalysts. In the case of the adsorption of carbon dioxide on X-type zeolites, the quantity of carbon dioxide adsorbed is much smaller on ion-exchanged zeolites than on NaX.
Zusammenfassung Thermogravimetrie und simultane DTA wurden zur Untersuchung der Adsorptions-, Desorptions-Erscheinungen und Oberflächenreaktionen an festen Katalysatoren eingesetzt. Die Messungen wurden and NaX und Zeolithen des Typs X sowie an Silika-Aluminiumoxidgelen Ketjen durchgeführt, welche mit Natriumhydroxid in Gegenwart von Kohlendioxid behandelt worden waren. Aufgrund der quantitativen Ergebnisse ist es möglich eine Deutung der Oberfiächenerscheinungen zu geben und die Existenz verschiedener aktiver Zentren an der Katalysatorenoberfläche nachzuweisen. Im Falle der Adsorption von Kohlendioxid an Zeolithen des Typs X ist die Menge des adsorbierten Kohlendioxids am Ionenaustauscher viel niedriger als am NaX.

Résumé Application de la TG et de l'ATD simultanées à l'étude des phénomènes d'adsorption, de désorption et de réactions de surface sur des catalyseurs solides. Les mesures ont été effectuées avec des zéolites échangeuses d'ions de type NaX et X ainsi qu'avec des gels Ketjen silice-alumine traités par NaOH en présence de CO2. Les résultats quantitatifs permettent de donner une interprétation des phénomènes de surface et d'établir l'existence de divers centres actifs à la surface des catalyseurs. Dans le cas de l'adsorption de CO2 sur les zéolites de type X, la quantité de CO2 adsorbé est beaucoup plus faible que sur les zéolites de type NaX.

DTA , . - NaX X - « », . . X, - , NaX.
  相似文献   

9.
Data obtained in a flow reactor show that iron(III) molybdate doped by bismuth can oxidize propylene to acrylic acid directly in one step. Part of the catalyst works in a partially reduced form and in the preparation of the catalyst the surface acidity must be controlled.
, , (III), , . .
  相似文献   

10.
The interaction of oxygen with preadsorbed hydrogen on thermally activated magnesium oxide has been studied by temperature-programmed desorption (TPD) method. It was found that oxygen at 450 K reacts with preadsorbed hydrogen and the resulting hydroxylation suppresses the adsorptive capacity of magnesia with respect to oxygen.
. , 450 K , .
  相似文献   

11.
The kinetics and intermediates of the permanganate oxidation of trans-crotonic acid have been investigated in the pH range of 0.5–5.0 using the stoppedflow technique. The formation of manganese(III) as a short-lived intermediate has been established. The reaction is first order with respect to both MnO 4 and crotonic acid (crotonate). The resolved rate constants at 25°C are 730 and 410 M–1 sec–1 for the acid and the anion, respectively. The reaction mechanism is discussed.
pH=0,5–5,0, . (III) . MnO 4 , (). 25°C 730 410 M–1 –1 , . .
  相似文献   

12.
Ru and Cu samples supported on SiO2, Al2O3 and MgO were studied by the temperature-programmed reduction (TPR) technique. Experiments were carried out both on unreduced impregnated salts and after oxidation of already reduced samples.The TPR profiles were found to be strongly dependent on the support used, indicating different degrees of interaction between the metal and the support, which can be ranked as MgOAl2O3>SiO2. It is suggested that the interaction occurs through the formation of surface complexes difficult to reduce. The decrease in hydrogen consumption observed on the Ru samples with the number of TPR cycles is attributed to the difficulty in oxidizing large Ru particles.
Zusammenfassung Auf SiO2, Al2O3 und MgO aufgebrachte Ru- und Cu-Proben wurden mittels temperaturprogrammierter Reduktion (TPR) untersucht. Experimente wurden sowohl an unreduzierten Salzimprägnierungen als auch nach Oxydation von bereits reduzierten Proben ausgeführt. Die TPR-Profile sind stark vom benutzten Trägen abhängig, was auf unterschiedliche Grade der Wechselwirkung zwischen Metall und Träger hindeutet; die Reihenfolge ist MgOAl2O3>SiO2. Es wird vermutet, daß das Wesen der Wechselwirkung in der Bildung von schwer reduzierbaren Oberflächenkomplexen zu suchen ist. Die bei Ru-Proben mit der Zahl der TPR-Zyklen beobachtete Verminderung des Wasserstoffverbrauchs wird mit der Schwierigkeit, große Ru-Partikel zu oxydieren, in Zusammenhang gebracht.

- () SiO2, l23 MgO. , , , . , , MgO Al2O3>SiO2. , , . , .
  相似文献   

13.
The problem of predicting the activity of oxide and carbonate catalysts for some reactions of petrochemical synthesis (vapor phase conversion of carboxylic acids, catalytic oxidation of asphaltic tar to bitumen) according to the established dependence of thermal stability variations of intermediates on the formation enthalpy of metal oxides or standard ele.trode potentials is discussed.
, ( , ) .
  相似文献   

14.
The thermal behaviour of synthetic montmorillonite of relatively simple chemical composition has been studied and interpreted. Montmorillonite was prepared by hydrothermal synthesis at 300° and 8.8 MPa during 165 hours. With the methods of DTA, DTG, TG, X-ray diffraction analysis, infrared spectroscopy and electron microscopy it was proved that the synthetic montmorillonite is a monomineral sample and no differences from natural montmorillonite were observed.
Zusammenfassung Das thermische Verhalten synthetischer Montmorillonite verhältnismässig einfacher chemischer Zusammensetzung wurde untersucht und gedeutet. Montmorillonit wurde durch hydrothermische Synthese bei 300°C und 8.8 MPa in 165 Stunden hergestellt. Durch die Methoden der DTA, DTG, TG, Röntgendiffraktionsanalyse, Infrarotspektroskopie und Elektronenmikroskopie wurde erwiesen, daß synthetische Montmorillonit eine monominerale Probe ist und keine Abweichungen von natürlichem Montmorillonit beobachtet werden konnten.

. 165 300° 8.8 . , , , , , .
  相似文献   

15.
    
Oxidation activity of catalysts based on molybdophosphoric acid are estimated from the equations based on the -function.
, , .
  相似文献   

16.
Pulse photolysis measurements of rate constants for the decay of peroxide radicals of seven polyatomic esters show that the reaction is diffusion-controlled for esters with 2 cP. The Smoluchowsky equation is suggested to calculate 2kt for esters with short alkyl radicals.
. , - , 2 . 2kt .
  相似文献   

17.
Some peculiarities of reduction of one-electron oxidants, Ru(bpy) 3 3+ and Ru(bpy)2(py) 2 3+ , in the absence of catalysts (when oxidation of the oxidant's ligands occurs) and in their presence (when also oxidation of water to dioxygen occurs) are discussed. Both oxidation reactions are thought to have a common intermediate.
Ru(bpy) 3 3+ Ru(bpy)2(py) 2 3+ ( -) ( ). , .
  相似文献   

18.
Seven complex compounds exhibiting the compositions Ni(en)3Ni(CN)4·H2O (I), Ni(en)3Ni(CN)4 (II),-Ni(en)2Ni(CN)4 (III), Ni(en)Ni(CN)4·2H2O (IV), Ni(en)Ni(CN)4 (V), Ni(en)2Ni(CN)4 · 2.5H2O (VI) and-Ni(en)2Ni(CN)4 (VII) were prepared from the system Ni-en-[Ni(CN)4]2–-H2O. These compounds were examined by the methods of infrared spectroscopy, X-ray powder diffractometry, UV-VIS reflectance spectroscopy, and also by the measurement of magnetic moments. The thermal stability, the stoichiometry of thermal decomposition and the mutual transformations were investigated with a derivatograph. The reactions proceeding according to the following schemes were observed if the system was heated to appropriate temperature: (I)(II)(III)(V)(IV) and (VI)(VII)(III)(V)(IV) Process (VII)(III) represents isomerization. The reversibility of the process (V)(IV) is due to the high hygroscopicity of the anhydrous complex. The changes in structure in the course of the individual processes are discussed.
Zusammenfassung Aus einem System Ni-en-[Ni(CN)4]2–-H2O wurden sieben Komplexe der Formeln Ni(en)3Ni(CN)4·H2O (I), Ni(en)3Ni(CN)4 (II),-Ni(en)2Ni(CN)4 (III), Ni(en)Ni(CN)4·2H2O (IV), Ni(en)Ni(CN)4 (V), Ni(en)2Ni(CN)4 · 2.5H2O (VI) und-Ni(en)2Ni(CN)4 (VII) hergestellt. Diese Verbindungen wurden mittels IR-Spektroskopie, Röntgenpulverdiffraktometrie, UV-Reflexionsspektroskopie und durch Messungen des magnetischen Momentes untersucht. Die Wärmestabilität, die Stöchiometrie des thermischen Zerfalles und die gegenseitigen Umwandlungen wurden mittels eines Derivatographen untersucht. Wird das System auf geeignete Temperaturen erhitzt, kann der Reaktionsverlauf durch folgendes Schema dargestellt werden: (I)(II)(III)(V)(IV) und (VI)(VII)(III)(V)(IV).Der Prozeß (VII)(III) verkörpert eine Isomerisierung. Die Umkehrbarkeit von Prozeß (V)(IV) ist auf die ausgeprägten Hygroskopieeigenschaften des wasserfreien Komplexes zurückzuführen. Es werden die im Ablaufe der einzelnen Prozesse vorgehenden Strukturveränderungen besprochen.

Ni- -[No(N)]2 -2 Ni(en)3Ni(CN)4 · 2 (I), Ni(en)3Ni(CN)4 (II),-Ni(en)2Ni(CN)4 (III), Ni(en)Ni(CN)4-2H2O (IV), Ni(en)Ni(CN)4 (V), Ni(en)2Ni(CN)4 · 2,5H2O (VI) -Ni(en)2Ni(CN)4 (VII). , , - , . , . (I)(II)(III)(V)(IV) (VI)(VII)(III)(V)(IV). (VII)(III) . (V)(IV) . .
  相似文献   

19.
The thermal decomposition processes of carbonate minerals are analyzed by comparison of the notions on chemical bonds in crystals and modern concepts on solid-phase reactions. It is shown that depending on the mechanism of thermal dissociation, the carbonate minerals most widespread in nature may be divided into two groups: first, CaCO3, SrCO3 and BaCO3, characterized by decomposition temperatures close to the equilibrium values and undergoing recombination on cooling; and second, MgCO3, MnCO3, FeCO3 and ZnCO3, with dissociation temperatures exceeding the equilibrium values by 250° and recombining only at high partial pressures of CO2 (above 1000 bar).
Zusammenfassung Die thermischen Zersetzungsprozesse von Carbonatmineralien wurden auf der Basis der Vorstellungen über die chemischen Bindungen in Kristallen und moderner Konzeptionen über Festphasenreaktionen analysiert. Es wird gezeigt, dass die in der Natur weitverbreitetsten Carbonatmineralien, abhängig vom Mechanismus der thermischen Zersetzung, in zwei Gruppen unterteilt werden können: die erste umfasst CaCO3, SrCO3 und BaCO3 und ist durch Zersetzungstemperaturen nahe den Gleichgewichtswerten und durch Rekombination beim Abkühlen charakterisiert, zur zweiten gehören MgCO3, MnCO3, FeCO3 und ZnCO3 mit Dissoziationstemperaturen, die die Gleichgewichtswerte um etwa 250° überschreiten, und die nur bei hohen CO2-Partialdrücken (über 1000 bar) rekombinieren.

, . , , . CaCO3, SrCO3, BaCO3 , . MgCO3, MnCO3, FeCO3, ZnCO3 , 250°, ( 1000 .).
  相似文献   

20.
The error in purity determinations by differential scanning calorimetry has been studied on two different kinds of systems, metallic and organic, the latter with different types of impurities added. The organic systems have been corrected for solid-solubility error by a nuclear magnetic resonance technique.The impurities chosen for the organic systems were either quite dissimilar to the matrix or similar enough to render solid solution probable. This solid solution leads to deviations from the equation used for dynamic purity determinations. The nuclear magnetic resonance determination of the solidus establishes the proper starting temperature for area summation on a DSC curve.
Zusammenfassung Der Fehler in Reinheitsbestimmungen mittels Differential-Scanning-kalorimetrie wurde an zwei verschiedenartigen Systemen untersucht, metallisch und organisch, wobei zu letzteren verschiedentliche Verunreinigungen zugefügt wurden. Der durch Feststoff-Feststofflöslichkeit verursachte Fehler in den organischen Systemen wurde mittels einer kernmagnetischen Resonanzmethode korrigiert.Die für die organischen Systeme gewählten Verunreinigungen waren entweder sehr verschieden von der Matrix, oder aber genügend ähnlich, um feste Lösungen wahrscheinlich zu machen. Diese festen Lösungen führen zu Abweichungen von der für dynamische Reinheitsbestimmungen angewendeten Gleichung. Die Bestimmung der kernmagnetischen Resonanz des Feststoffs ermöglicht die Bestimmung der richtigen Anfangstemperatur für die Flächen-summierung auf der DSC-Kurve.

: . . . , , , , . , . -.


On leave from The Institute for Physical Chemistry, Polish Academy of Science, Warsaw, Poland.

The authors are grateful to the National Science Foundation for its support through Research Grant CHE 76-08765, and to S. E. Walter for assistance with some calculations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号