煤中痕量元素在循环流化床锅炉中的迁移行为与富集特性

对天津市某电厂循环流化床(CFB)锅炉燃用的原煤及燃烧产物底灰、飞灰、细飞灰(≤50 μm)进行痕量元素含量的测定,分析了Be、Zn、Hg、V、Cr、Mn、Co、Ni、Cu、As、Se、Cd、Pb 13种痕量元素在燃烧过程中的迁移行为,揭示了痕量元素在CFB锅炉中的分配、富集特性。结果表明,CFB锅炉中,较低的炉温对于痕量元素的迁移富集产生了较大的影响。由相对富集系数得知,Be、V、Co、Se在底灰中耗散,在飞灰中富集,Zn、Mn倾向于在底灰中富集,元素Cd、Pb、Ni、Cu挥发性较强,在底灰和飞灰中均是耗散。As受钙氧化物影响,挥发性表现并不明显。Hg在底灰和飞灰中相对富集系数均很低,表明Hg在整个燃烧过程中以气态形式排放;Hg、As、Se、V、Cr、Mn、Co、Ni、Cu、Zn、Pb均有向小颗粒物中富集的趋势。根据相对富集系数以及研究的13种元素在低温CFB锅炉中的迁移行为,将这些元素分为三类:A类(E_R<0.1),主要是以气态形式排放元素Hg;B类(0.1R≤0.85),较易挥发元素As、Be、Ni、Cu、Se、Cd、Pb、Co、V;C类(E_R>0.85),主要残留在固体产物中元素Zn、Mn、Cr。     

Certification of the contents of some heavy metals (Cd, Cu, Hg, Ni, Pb and Zn) in three types of soils

Summary The element contents of Cd, Cu, Hg, Ni, Pb and Zn of three types of soil were certified. The preparation, homogeneity and stability are reported. The certified contents as well as values for Co, Cr, Mn and Se and for the aqua regia soluble contents Cd, Cr, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Cu, Hg, Ni, Pb und Zn) in drei Bodenproben

Zusammenfassung In drei verschiedenen Bodenproben wurden die Elementgehalte an Cd, Cu, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Bereitung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt an Cr, Co, Mn und Se und der Gehalt an königswasserlöslichem Cd, Cr, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

Certification of the contents of some heavy metals (Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn) in three types of sewage sludge

Summary The element contents of Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn of three different types of sewage sludge were certified. The preparation, the homogeneity and the stability are reported. The certified contents as well as values for Cr and Se and for the aqua regia soluble contents of Cd, Cr, Co, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn) in drei Klärschlammproben

Zusammenfassung In drei verschiedenen Klärschlammproben wurden die Elementgehalte an Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Herstellung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt von Cr, Se und der Gehalt an königswasserlöslichem Cd, Cr, Co, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

藏药材白花龙胆花中微量元素的分析

对藏药材白花龙胆花中17种微量元素（Cu、Zn、Fe、Mn、Co、Ni、Se、Cr、Mg、Ca、K、Na、P、As、Hg、Pb、Cd）的含量作了测定。结果表明,白花龙胆花中含有较高的人体必需微量元素和常量元素,其中常量元素K、Ca、Na、Mg和微量元素Zn、Fe、Mn的含量均较高。     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Investigation of microwave assisted drying of samples and evaporation of aqueous solutions in trace element analysis

Investigations of microwave assisted drying of sample materials and microwave assisted evaporation of aqueous sample solutions and acidic digestion residues were accomplished by means of special rotors for the microwave digestion system MULTIWAVE. To check the results obtained by microwave assisted drying, the samples were also conventionally dried at 105 degrees C in an oven. The following samples have been dried: 10 g each of meat, fish, apple, cucumber, potato, mustard, yogurt, clay and marl; 1 g each of certified reference material TORT 2 (lobster hepatopancreas), BCR 278 (mussel tissue) and BCR 422 (cod muscle); 500 g garden mould. Microwave assisted drying takes 40 min for organic samples and 30 min for inorganic material. Important is a slow increase of microwave power during the first 20 min. The results agree well with conventional drying at 105 degrees C. Losses of As, Se and Hg have been investigated for 3 CRMs. Only Se shows losses in the range of 20%. Losses of As, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mg, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, Tl, V and Zn after evaporation of aqueous samples and acidic solutions after wet digestion, respectively, have been investigated. 50 mL aqueous solution was evaporated almost to dryness within 25 min. The recovery of Hg is 40-50%, of Se 90-95% and of the other elements 97-102%. 0.2 g each of TORT 2, BCR 278 and BCR 422 have been digested with 4 mL nitric acid and 1 mL hydrochloric acid by means of the microwave digestion system MULTIWAVE. The digestion residue was evaporated almost to dryness and dissolved again in 10 mL diluted nitric acid. In this case no element losses have been observed. The measured concentration of As, Cd, Cu, Fe, Mn, Hg, Pb, Mo, Ni, Se, Sr, V and Zn agree very well with the certified values. An important prerequisite for good recoveries is not to evaporate the solutions to complete dryness.     

Toxic and essential element concentrations in different honey types

The physicochemical parameters (free acidity, moisture content, sucrose content, hydroxymethylfurfural, reducing sugars, electrical conductivity, diastase activity and water-insoluble content), elements (Cu, Fe, Zn, Mn, Cr, Co, Ni, Se, K, Na, Ca, Mg) and heavy metal/metalloid concentrations (Cd, Hg, Pb and As) of 84 honeys (linden, multifloral, honeydew and acacia) from Serbia, were analyzed using ICP-MS. Concerning the physicochemical parameters, all tested honeys were found to meet European Legislation (EC Directive 2001/110). Potassium was the major element, ranging between 943.9 ± 538.6 mg/kg and 2563 ± 1817 mg/kg. Statistical analysis showed significant differences in the concentrations of Zn, Mn, Co and Na between the honeys. Selenium and Hg levels were below the limits of detection. Positive correlations were found between electrical conductivity and most of the elements. The present study showed that Serbian honey examined were of good quality according to its physicochemical parameters and met safety criteria concerning the concentrations of Cd, Hg, Pb and As.     

Elemental composition of drinking water supplies in three states in Southeastern Nigeria

The levels of some trace elements; Co, Mn, Cu, Zn, Cr, Cd, Pb, Fe, Hg, Se, As, Ni and minor elements; Na, K, Ca and Mg were determined in public drinking water supplies (public taps and groundwaters) in three states in Southeastern Nigeria using energy dispersive X-ray fluorescence spectrometry (EDXRF) and flame atomic absorption spectrometry (FAAS). The mean levels of most of the trace elements in the groundwater samples were below the World Health Organization (WHO) drinking water quality limits, the only exception being Hg whose mean value of 3.69 μg/l exceeded the WHO limit of 1.0 μg/l. Violations of the WHO limits were also observed for Fe, Zn, Se and Pb in some of the groundwater samples. In the public tap samples only Hg violated the WHO limit.     

Capabilities of double focussing magnetic sector-ICP-MS for the determination of trace elements in body fluids (blood, blood serum, urine) at the example of control materials

The capability of double focussing magnetic sector inductively coupled plasma mass spectrometry (HR-ICP-MS) for the determination of trace elements in different body fluids was investigated in commercially available control materials. The elements included in this study were: Al, As, Cd, Cr, Co, Cu, Hg, Mn, Ni, Pb, Sb, Se, Tl and Zn. Sample preparation, instrument stability and the results, which are in very good agreement to the given values, are presented and discussed. Received: 27 August 1997 / Revised: 19 November 1997 / Accepted: 23 November 1997     

Capabilities of double focussing magnetic sector-ICP-MS for the determination of trace elements in body fluids (blood, blood serum, urine) at the example of control materials

The capability of double focussing magnetic sector inductively coupled plasma mass spectrometry (HR-ICP-MS) for the determination of trace elements in different body fluids was investigated in commercially available control materials. The elements included in this study were: Al, As, Cd, Cr, Co, Cu, Hg, Mn, Ni, Pb, Sb, Se, Tl and Zn. Sample preparation, instrument stability and the results, which are in very good agreement to the given values, are presented and discussed. Received: 27 August 1997 / Revised: 19 November 1997 / Accepted: 23 November 1997     

Senio river ecosystem: characterization and distribution of inorganic species in water and sediments

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Senio river ecosystem. The species determined are Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg, F-, Cl-, Br, NO3-, SO4-, Na+, K+, Ca++, Mg++, NH4+ in integrated water, and Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%. Limitedly to Cu, Pb, Cd and Zn a critical comparison with voltammetric measurements is also discussed.     

Certified reference material (CRM 414) for the quality control of trace element analysis in plankton

Summary Analyses of plankton are performed by a number of organisations to investigate the transfer and uptake of toxic elements along the trophic chain and to monitor the levels of contamination of different aquatic environments. In order to obtain reliable transfer functions in environmental models or to use plankton as an indicator organism for the assessment of environmental pollution, these analyses should give accurate results. As accuracy requires quality control and the application of certified reference materials (CRMs), a certification campaign has been conducted by the Community Bureau of Reference (BCR). A plankton material was collected in a freshwater pond, lyophilised, homogenised and bottled and its homogeneity and long-term stability were verified. The material (CRM 414) was analysed by a group of 15 selected laboratories having given proof of their adequate QC and using different analytical methods. The contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, V and Zn are certified. This paper presents the certification work performed.     

Essential and trace element contents of some Nigerian medicinal plants

The energy-dispersive X-ray fluorescence (EDXRF) spectroscopy has been used for the determination of essential and trace elements" contents of some twenty Nigerian medicinal plants. The accuracy and precision of the technique were assured by analyzing the European Community Bureau Reference Standard BCR 62 (Olive Leaves). Fourteen elements, namely K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br, Rb, Sr were detected with toxic heavy metal such as Cd, As, Pb, Hg were detected in the samples. The ranges of elemental concentrations varied from 7.7^.10⁴ to 1.6 mg/kg in the herbs. The results show that many of these plants contain elements of vital importance for human metabolism and prevention and healing of diseases.     

The decomposition of oils and fats in a stream of oxygen for the determination of trace elements

For the determination of Al, Cr, Mn, Fe, Cu, Zn, Se, Cd, Hg and Pb at μg g^-1 and ng g^-1 levels in oils and fats by electrothermal atomic absorption spectrometry (a.a.s.), the sample is burnt in a stream of pure oxygen in a special combustion apparatus (Trace-O-Mat). Volatile elements are condensed on a cold finger cooled with liquid nitrogen. After combustion the trace elements are dissolved off the cooled areas and from the sample holder by refluxing with 2 ml of high-purity nitric acid (65%). Recoveries were tested on reference materials by electrothermal a.a.s. and were found to be ? 95%.     

Summary of preparation and homogeneity characterization of ten agricultural food reference materials for elemental composition

Summary Preparation and development has been completed of ten agricultural/food reference materials (RMs): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, durum wheat flour, whole egg powder and microcrystalline cellulose. Homogeneity tests for 14 elements, Al, Ca, Cd, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were performed by the initiating laboratories by application of precise and reliable analytical methods based on flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. An extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Estimates of homogeneity from within-laboratory precision indicated that all materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values are available. Two thirds of all homogeneity coefficients of variation were below 5%.     

羊红膻中微量元素含量的测定

采用高分辨全谱直读电感耦合等离子体发射光谱仪测定了羊红膻(Pimpinella thellungianaWolff)药材地上与地下不同部位中含Cu、K、Na、Fe、Se、Mg、As、Ca、Cd、Cr、Mn、Ni、P、Pb和Zn等15种微量元素含量,并进行了比较。结果表明,重金属As和Pb几乎检测不到,K含量均高;同时也为羊红膻药理作用及临床用药提供科学依据。     

Simultaneous multi-element analysis of trace elements in soil samples by means of high-resolution inductively coupled plasma sector field mass spectrometry (SF-ICP-MS)

The potential of SF-ICP-MS for trace element analysis in complex environmental matrices such as soil solutions was investigated. Spectral interferences found in mass spectra of soil matrices are presented in detail. Furthermore, the influences of single components of the soil matrix on the signal intensity of selected elements were studied. Detection limits of different elements are presented with respect to the composition of the matrix. A fast and accurate method for quasi-simultaneous determination of Al, Si, P, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Hg and Pb in aqueous soil extracts was established. Received: 3 January 2000 / Revised: 28 March 2000 / Accepted: 31 March 2000     

Certified reference materials—Hay Powder (CRM 129) and Rye Grass (CRM 281)—for the quality control of analysis of animal feed

Analyses of nutritive elements are routinely performed in grass or hay for animal feed in order to improve the state of health and growth of domestic animals. To control the quality of such determinations, the Community Bureau of Reference (BCR) so far has produced two certified reference materials: Hay Powder (CRM 129) and Rye Grass (CRM 281). After a careful preparation procedure of the materials, a homogeneity study and a long-term stability study, the contents of the elements Ca, K, Mg, P, S, Zn, I, N and Kjeldahl-N were certified in CRM 129, whereas CRM 281 was certified for As, B, Cd, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Se and Zn. This paper presents the certification exercise and especially concentrates on the elements I, B and Mo as examples of analytical work. Indicative values for Co, Cr, Fe, Cl and Na were also obtained.     

The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters.     

Determination of trace elements by inductively coupled plasma mass spectrometry of biomass and fuel oil reference materials using milligram sample sizes

Most of the analytical techniques used to quantify elements associated with solid samples suffer from high detection limits and cannot be used for trace elements in biomass samples, particularly when only 20 mg are available for analysis. Inductively coupled plasma mass spectrometry (ICP-MS) can achieve detection limits of parts-per-trillion with liquid sample introduction by solution nebulisation. This technique was therefore tested with two standard biomass reference materials: oriental tobacco leaves and cabbage leaves. Two preparations successfully used on coal standards were used to digest the solid samples: a total digestion method (wet ashing digestion) and a partial leaching (microwave extraction). The concentrations of up to seventeen elements (As, Ba, Be, Cd, Co, Cr, Cu, Ga, Mn, Mo, Ni, Pb, Sb, Se, Sn, V and Zn) were measured after the two preparations. The accuracy and sensitivity of the measurements improved when the dilution factor decreased from 5000 to 1000 and to 500. Since the proportion of mineral matter in biomass samples is small (5%), the microwave digestion extracted elements that are generally not completely extracted from coal samples (e.g. Sb). However, some trace element concentrations were below the limit of quantification after microwave extraction, even with a reduced dilution factor (As, Se and Mo) and could not be quantified. A fuel oil was also digested. The trace element concentrations were very low (between 28 and 0.1 microgram g(-1)) but acceptable results were obtained by applying a dilution factor of 100. Only six elements in the fuel oil (As, Ba, Co, Ni, Se and V) had certified or indicated values. Factors affecting the accuracy and sensitivity of the analyses are discussed. The reproducibility of analysis of the tobacco leaf standard was checked over a period of nine months by both digestion methods. The wet ashing method gave acceptable reproducibility for Ba, Cd, Co, Cu, Ga, Mn, Mo, Ni, Pb, V and Zn but poor precision for Cr, Se and Sn and showed evidence of residual chloride interference for As. The microwave extraction gave good reproducibility for As, Ba, Cd, Co, Cr, Cu, Mo, Ni and Zn but poor precision for Se and low recoveries for Ga, Mn, Sn and V. In spite of the small quantities of material analysed, it proved possible to determine the trace elements at levels down to 0.1 microgram g(-1) in the reference materials.