Food additives characterization by infrared,Raman, and surface‐enhanced Raman spectroscopies

Fourier‐transform infrared (FT‐IR), Raman (RS), and surface‐enhanced Raman scattering (SERS) spectra of β‐hydroxy‐β‐methylobutanoic acid (HMB), L ‐carnitine, and N‐methylglycocyamine (creatine) have been measured. The SERS spectra have been taken from species adsorbed on a colloidal silver surface. The respective FT‐IR and RS band assignments (solid‐state samples) based on the literature data have been proposed. The strongest absorptions in the FT‐IR spectrum of creatine are observed at 1398, 1615, and 1699 cm⁻¹, which are due to ν_s(COOH) + ν(CN) + δ(CN), ρ_s(NH₂), and ν(C O) modes, respectively, whereas those of L ‐carnitine (at 1396/1586 cm⁻¹ and 1480 cm⁻¹) and HMB (at 1405/1555/1585 cm⁻¹ and 1437–1473 cm⁻¹) are associated with carboxyl and methyl/methylene group vibrations, respectively. On the other hand, the strongest bands in the RS spectrum of HMB observed at 748/1442/1462 cm⁻¹ and 1408 cm⁻¹ are due to methyl/methylene deformations and carboxyl group vibrations, respectively. The strongest Raman band of creatine at 831 cm⁻¹ (ρ_w(R NH₂)) is accompanied by two weaker bands at 1054 and 1397 cm⁻¹ due to ν(CN) + ν(R NH₂) and ν_s(COOH) + ν(CN) + δ(CN) modes, respectively. In the case of L ‐carnitine, its RS spectrum is dominated by bands at 772 and 1461 cm⁻¹ assigned to ρ_r(CH₂) and δ(CH₃), respectively. The analysis of the SERS spectra shows that HMB interacts with the silver surface mainly through the  COO⁻, hydroxyl, and  CH₂ groups, whereas L ‐carnitine binds to the surface via  COO⁻ and  N⁺(CH₃)₃ which is rarely enhanced at pH = 8.3. On the other hand, it seems that creatine binds weakly to the silver surface mainly by  NH₂, and C O from the  COO⁻ group. Copyright © 2006 John Wiley & Sons, Ltd.     

Why the ΔνCH blue shift is larger in chloral than in dichloroacetyl chloride dimers?

Raman spectra of the Cl₃CCHO/CCl₄ and Cl₃CCHO/C₆D₁₂ binary systems were recorded as a function of the mole fraction. Features originating from self‐aggregates of chloral (trichloroethanal, trichloroacetaldehyde—TCAA) molecules were detected in different spectral regions. The most pronounced changes were observed in the vicinity of the ν(CO) and ν(C H) stretching vibration bands. Using two‐dimensional correlation spectroscopy (2D‐COS), evolving‐factor analysis (EFA) and multivariate curve resolution (MCR), dimer bands were identified, and their positions were determined. The ν(C H) stretching vibration band in dimers was blue‐shifted by nearly 18 cm⁻¹, whereas the ν(CO) dimer band was red‐shifted by more than 5 cm⁻¹. For these bands, the observed shifts were accompanied by an almost twofold change in the bandwidth, from approximately 19 and 6 cm⁻¹ for dilute solutions (x = 0.05) to 36.6 and 11.5 cm⁻¹, respectively, in pure TCAA. The formation of dimers was confirmed by multivariate analysis of the Raman spectra of chloral recorded as a function of temperature. Analogous analysis of dichloroacetyl chloride (DCAC) spectra gave an 8.9 cm⁻¹ blue shift for the ν(C H) vibration band and − 5.5/− 10.1 cm⁻¹ shifts for the ν(CO) stretching vibrations of the two conformers present. To facilitate the interpretation of experimental findings, the optimized geometries and vibrational wavenumbers of the Cl₃CCHO/HCl₂CCClO molecules and (Cl₃CCHO)₂/(HCl₂CCClO)₂ dimers were calculated at the B3LYP/6‐311 + + G(3df,3pd) level. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopic characterisation of the oxalate mineral wheatleyite Na2Cu2+(C2O4)2·2H2O

The mineral wheatleyite has been synthesised and characterised by Raman spectroscopy complimented with infrared spectroscopy. Two Raman bands at 1434 and 1470 cm⁻¹ are assigned to the ν_{(C O)} stretching mode and implies two independent oxalate anions. Two intense Raman bands observed at 904 and 860 cm⁻¹ are assigned to the ν(C C) stretching mode and support the concept of two non‐equivalent oxalate units in the wheatleyite structure. Two strong bands observed at 565 and 585 cm⁻¹ are assigned to the symmetric CCO in plane bending modes. The Raman band at 387 cm⁻¹ is attributed to the CuO stretching vibration and the bands at 127 and 173 cm⁻¹ to OCuO bending vibrations. A comparison is made with Raman spectra of selected natural oxalate bearing minerals. Oxalates are markers or indicators of environmental events. Oxalates are readily determined by Raman spectroscopy. Thus, deterioration of works of art, biogeochemical cycles, plant metal complexation, the presence of pigments and minerals formed in caves can be analysed. Copyright © 2008 John Wiley & Sons, Ltd.     

Crystal → nematic phase transition in the liquid crystalline system 1‐isothiocyanato‐4‐(trans‐4‐propylcyclohexyl) benzene (3CHBT) probed by temperature‐dependent micro‐Raman study and DFT calculations

Raman spectra of 3CHBT in unoriented form were recorded at 14 different temperature measurements in the range 25–55 °C, which covers the crystal → nematic (N) phase transition, and the Raman signatures of the phase transition were identified. The wavenumber shifts and linewidth changes of Raman marker bands with varying temperature were determined. The assignments of important vibrational modes of 3CHBT were also made using the experimentally observed Raman and infrared spectra, calculated wavenumbers, and potential energy distribution. The DFT calculations using the B3LYP method employing 6‐31G functional were performed for geometry optimization and vibrational spectra of monomer and dimer of 3CHBT. The analysis of the vibrational bands, especially the variation of their peak position as a function of temperature in two different spectral regions, 1150–1275 cm⁻¹ and 1950–2300 cm⁻¹, is discussed in detail. Both the linewidth and peak position of the ( C H ) in‐plane bending and ν(NCS) modes, which give Raman signatures of the crystal → N phase transition, are discussed in detail. The molecular dynamics of this transition has also been discussed. We propose the co‐existence of two types of dimers, one in parallel and the other in antiparallel arrangement, while going to the nematic phase. The structure of the nematic phase in bulk has also been proposed in terms of these dimers. The red shift of the ν(NCS) band and blue shift of almost all other ring modes show increased intermolecular interaction between the aromatic rings and decreased intermolecular interaction between two  NCS groups in the nematic phase. Copyright © 2009 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of sodium alginate and its block fractions by surface‐enhanced Raman spectroscopy

The surface‐enhanced Raman scattering (SERS) of sodium alginates and their hetero‐ and homopolymeric fractions obtained from four seaweeds of the Chilean coast was studied. Alginic acid is a copolymer of β‐D ‐mannuronic acid (M) and α‐L guluronic acid (G), linked 1 → 4, forming two homopolymeric fractions (MM and GG) and a heteropolymeric fraction (MG). The SERS spectra were registered on silver colloid with the 632.8 nm line of a He Ne laser. The SERS spectra of sodium alginate and the polyguluronate fraction present various carboxylate bands which are probably due to the coexistence of different molecular conformations. SERS allows to differentiate the hetero‐ and homopolymeric fractions of alginic acid by characteristic bands. In the fingerprint region, all the poly‐D ‐mannuronate samples present a band around 946 cm⁻¹ assigned to C O stretching, and C C H and C O H deformation vibrations, a band at 863 cm⁻¹ assigned to deformation vibration of β‐C₁ H group, and one at 799–788 cm⁻¹ due to the contributions of various vibration modes. Poly‐L ‐guluronate spectra show three characteristic bands, at 928–913 cm⁻¹ assigned to symmetric stretching vibration of C O C group, at 890–889 cm⁻¹ due to C C H, skeletal C C, and C O vibrations, and at 797 cm⁻¹ assigned to α C₁ H deformation vibration. The heteropolymeric fractions present two characteristic bands in the region with the more important one being an intense band at 730 cm⁻¹ due to ring breathing vibration mode. Copyright © 2009 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the antimony mineral klebelsbergite Sb4O4(OH)2(SO4)

Many minerals based upon antimonite and antimonate anions remain to be studied. Most of the bands occur in the low wavenumber region, making the use of infrared spectroscopy difficult. This problem can be overcome by using Raman spectroscopy. The Raman spectra of the mineral klebelsbergite Sb₄O₄(OH)₂(SO₄) were studied and related to the structure of the mineral. The Raman band observed at 971 cm⁻¹ and a series of overlapping bands are observed at 1029, 1074, 1089, 1139 and 1142 cm⁻¹ are assigned to the SO₄²⁻ν₁ symmetric and ν₃ antisymmetric stretching modes, respectively. Two Raman bands are observed at 662 and 723 cm⁻¹, which are assigned to the Sb O ν₃ antisymmetric and ν₁ symmetric stretching modes, respectively. The intense Raman bands at 581, 604 and 611 cm⁻¹ are assigned to the ν₄ SO₄²⁻ bending modes. Two overlapping bands at 481 and 489 cm⁻¹ are assigned to the ν₂ SO₄²⁻ bending mode. Low‐intensity bands at 410, 435 and 446 cm⁻¹ may be attributed to O Sb O bending modes. The Raman band at 3435 cm⁻¹ is attributed to the O H stretching vibration of the OH units. Multiple Raman bands for both SO₄²⁻ and Sb O stretching vibrations support the concept of the non‐equivalence of these units in the klebelsbergite structure. It is proposed that the two sulfate anions are distorted to different extents in the klebelsbergite structure. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy of the sampleite group of minerals

Raman and infrared spectroscopy enabled insights into the molecular structure of the sampleite group of minerals. These minerals are based upon the incorporation of either phosphate or arsenate with chloride anion into the structure, and as a consequence the spectra reflect the bands attributable to these anions, namely, phosphate or arsenate with chloride. The sampleite vibrational spectrum reflects the spectrum of the phosphate anion and consists of ν₁ at 964 cm⁻¹, ν₂ at 451 cm⁻¹, ν₃ at 1016 and 1088 cm⁻¹ and ν₄ at 643, 604, 591 and 557 cm⁻¹. The lavendulan spectrum consists of ν₁ at 854 cm⁻¹, ν₂ at 345 cm⁻¹, ν₃ at 878 cm⁻¹ and ν₄ at 545 cm⁻¹. The Raman spectrum of lemanskiite is different from that of lavendulan consistent with a different structure. Low wavenumber bands at 227 and 210 cm⁻¹ may be assigned to CuCl transverse/longitudinal (TO/LO) optic vibrations. Raman spectroscopy identified the substitution of arsenate by phosphate in zdenekite and lavendulan. Copyright © 2007 John Wiley & Sons, Ltd.     

Studies on the resonance Raman spectra of polyaniline obtained with near‐IR excitation

The effects of near‐IR (NIR) laser power over the Raman spectra of poly(aniline) emeraldine salt (PANI‐ES) and base (PANI‐EB) were investigated. The reasons for the existence of several bands from 1324 to 1500 cm⁻¹ in the Raman spectra of poly(aniline) obtained at NIR region were also studied. The bands from 1324 to 1375 cm⁻¹ were associated to νC N of polarons with different conjugation lengths and the bands from 1450 to 1500 cm⁻¹ in Raman spectra of PANI emeraldine and pernigraniline base forms were correlated to νCN modes associated with quinoid units having different conjugation lengths. The increase of laser power at 1064.0 nm causes the deprotonation of PANI‐ES and the formation of cross‐linking segments having phenazine and/or oxazine rings. For PANI‐EB only a small spectral change is observed when the laser power is increased, owing to the low absorption of this form in the NIR region. Copyright © 2007 John Wiley & Sons, Ltd.     

Improper hydrogen bonding and motional narrowing in binary mixtures of 2‐ and 3‐bromopyridine in methanol probed by polarized Raman study and DFT calculations

A concentration‐dependent Raman study of the ν(C Br) stretching and trigonal bending modes of 2‐ and 3‐Br‐pyridine (2Br‐p and 3Br‐p) in CH₃OH was performed at different mole fractions of the reference molecule, 2Br‐p/3Br‐p, from 0.1 to 0.9 in order to understand the origin of blue/red wavenumber shifts of the vibrational modes due to hydrogen‐bond formation. The appearance of additional Raman bands in these binary systems at ∼617 cm⁻¹in the case of 2Br‐p and at ∼618 cm⁻¹ in the case of 3Br‐p compared to neat bromopyridine derivatives were attributed to specific hydrogen‐bonded complexes formed in the mixtures. The interpretation of experimental results is supported by density functional calculations on optimized geometries and vibrational wavenumbers of 2Br‐p and 3Br‐p and a series of hydrogen‐bonded complexes with methanol. The parameters obtained from these calculations were used for a qualitative explanation of the blue/red shifts. The wavenumber shifts and linewidth changes for the ν(C Br) stretching and trigonal bending modes as a function of concentration reveal that the caging effects leading to motional narrowing and diffusion‐causing line broadening are simultaneously operative, in addition to the blue shift caused due to hydrogen bonding. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the uranyl selenite mineral marthozite Cu[(UO2)3(SeO3)2O2]·8H2O

The mineral marthozite, a uranyl selenite, has been characterised by Raman spectroscopy at 298 K. The bands at 812 and 797 cm⁻¹ were assigned to the symmetric stretching modes of the (UO₂)²⁺ and (SeO₃)²⁻ units, respectively. These values gave the calculated U O bond lengths in uranyl of 1.799 and/or 1.814 Å. Average U O bond length in uranyl is 1.795 Å, inferred from the X‐ray single crystal structure analysis of marthozite by Cooper and Hawthorne. The broad band at 869 cm⁻¹ was assigned to the ν₃ antisymmetric stretching mode of the (UO₂)²⁺ (calculated U O bond length 1.808 Å). The band at 739 cm⁻¹ was attributed to the ν₃ antisymmetric stretching vibration of the (SeO₃)²⁻ units. The ν₄ and the ν₂ vibrational modes of the (SeO₃)²⁻ units were observed at 424 and 473 cm⁻¹. Bands observed at 257, and 199 and 139 cm⁻¹ were assigned to OUO bending vibrations and lattice vibrations, respectively. O H···O hydrogen bond lengths were inferred using Libowiztky's empirical relation. The infrared spectrum of marthozite was studied for complementation. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of an aliphatic spacer group on the adsorption mechanism on the colloidal silver surface of L‐proline phosphonodipeptides

A comparative study of molecular structures of five L ‐proline (L ‐Pro) phosphonodipeptides: L ‐Pro‐NH‐C(Me,Me)‐PO₃H₂ (P1), L ‐Pro‐NH‐C(Me,iPr)‐PO₃H₂ (P2), L ‐Pro‐L ‐NH‐CH(iBu)‐PO₃H₂ (P3), L ‐Pro‐L ‐NH‐CH(PA)‐PO₃H₂ (P4) and L ‐Pro‐L ‐NH‐CH(BA)‐PO₃H₂ (P5) has been carried out using Raman and absorption infrared techniques of molecular spectroscopy. The interpretation of the obtained spectra has been supported by density functional theory calculations (DFT) at the B3LYP; 6–31 + + G** level using Gaussian 2003 software. The surface‐enhanced Raman scattering (SERS) on Ag‐sol in aqueous solutions of these phosphonopeptides has also been investigated. The surface geometry of these molecules on a silver colloidal surface has been determined by observing the position and relative intensity changes of the Pro ring, amide, phosphonate and so‐called spacer (−R) groups vibrations of the enhanced bands in their SERS spectra. Results show that P4 and P5 adsorb onto the silver as anionic molecules mainly via the amide bond (∼1630, ∼1533, ∼1248, ∼800 and ∼565 cm⁻¹), Pro ring (∼956, ∼907 and ∼876 cm⁻¹) and carboxylate group (∼1395 and ∼909 cm⁻¹). Coadsorption of the imine nitrogen atom and PO group with the silver surface, possibly by formation of a weaker interaction with the metal, is also suggested by the enhancement of the bands at 1158 and 1248 cm⁻¹. P1, P2 and P3 show two orientations of their main chain on the silver surface resulting from different interactions of the  C CH₃,  NH and  CONH fragments with this surface. Bonding to the Ag surface occurs mainly through the imino atom (1166 cm⁻¹) for P2, while for P1 and P3 it occurs via the methyl group(s) (1194–1208 cm⁻¹). The amide group functionality (CONH) is practically not involved in the adsorption process for P1 and P2, whereas the C_s P bonds do assist in the adsorption. Copyright © 2008 John Wiley & Sons, Ltd.     

Transition of chromium oxyhydroxide nanomaterials to chromium oxide: a hot‐stage Raman spectroscopic study

The transition of disc‐like chromium hydroxide nanomaterials to chromium oxide nanomaterials has been studied by hot‐stage Raman spectroscopy. The structure and morphology of α‐CrO(OH) synthesised using hydrothermal treatment were confirmed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The Raman spectrum of α‐CrO(OH) is characterised by two intense bands at 823 and 630 cm⁻¹ attributed to ν₁ Cr^III O symmetric stretching mode and the band at 1179 cm⁻¹ attributed to Cr^III OH δ deformation modes. No bands are observed above 3000 cm⁻¹. The absence of characteristic OH stretching vibrations may be due to short hydrogen bonds in the α‐CrO(OH) structure. Upon thermal treatment of α‐CrO(OH), new Raman bands are observed at 599, 542, 513, 396, 344 and 304 cm⁻¹, which are attributed to Cr₂O₃. This hot‐stage Raman study shows that the transition of α‐CrO(OH) to Cr₂O₃ occurs before 350 °C. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the uranyl carbonate mineral voglite

Raman spectroscopy, complemented with infrared spectroscopy, was used to study the uranyl carbonate mineral voglite. The mineral has the formula Ca₂Cu²⁺ [(UO₂)(CO₃)₃](CO₃)^•6H₂O, and bands attributed to these vibrating units are readily identified in the Raman spectrum. Symmetric stretching modes at 836 and 1094 cm⁻¹ are assigned to ν₁(UO₂)²⁺ and ν₁(CO₃)²⁻ units, respectively. The ν₃ antisymmetric stretching modes of (UO₂)²⁺ are not observed in the Raman spectrum but may be readily observed in the infrared spectrum at 898 cm⁻¹. The ν₃ antisymmetric stretching mode of (CO₃)²⁻ is observed in the Raman spectrum at 1369 cm⁻¹ as a low intensity band as is also the ν₃(CO₃)²⁻ infrared modes at 1362, 1425, 1509 and 1566 cm⁻¹. No ν₂(CO₃)²⁻ Raman bending modes are observed for voglite. The Raman band at 749 cm⁻¹ and the two infrared bands at 747 and 709 cm⁻¹ are assigned to the ν₄(CO₃)²⁻ bending modes. U O bond and O H…O bond lengths in the structure of voglite were inferred from the infrared and Raman spectra. Copyright © 2007 John Wiley & Sons, Ltd.     

Transition of synthetic chromium oxide gel to crystalline chromium oxide: a hot‐stage Raman spectroscopic study

Chromium oxide gel material was synthesised and appeared to be amorphous in X‐ray diffraction study. The changes in the structure of the synthetic chromium oxide gel were investigated using hot‐stage Raman spectroscopy based upon the results of thermogravimetric analysis. The thermally decomposed product of the synthetic chromium oxide gel in nitrogen atmosphere was confirmed to be crystalline Cr₂O₃ as determined by the hot‐stage Raman spectra. Two bands were observed at 849 and 735 cm⁻¹ in the Raman spectrum at 25 °C, which were attributed to the symmetric stretching modes of O Cr^III OH and O Cr^III O. With temperature increase, the intensity of the band at 849 cm⁻¹ decreased, while that of the band at 735 cm⁻¹ increased. These changes in intensity are attributed to the loss of OH groups and formation of O Cr^III O units in the structure. A strongly hydrogen‐bonded water H O H bending band was found at 1704 cm⁻¹ in the Raman spectrum of the chromium oxide gel; however, this band shifted to around 1590 cm⁻¹ due to destruction of the hydrogen bonds upon thermal treatment. Six new Raman bands were observed at 578, 540, 513, 390, 342 and 303 cm⁻¹ attributed to the thermal decomposed product Cr₂O₃. The use of the hot‐stage Raman spectroscopy enabled low‐temperature phase changes brought about through dehydration and dehydroxylation to be studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the sulfite‐bearing minerals scotlandite,hannebachite and orschallite: implications for the desulfation of soils

The structures of the naturally occurring sulfite‐bearing minerals scotlandite, hannebachite and orschallite have been studied by Raman spectroscopy. Raman bands are observed for scotlandite PbSO₃ at 935, 880, 622 and 474 cm⁻¹ and are assigned to the (SO₃)²⁻ν₁(A₁), ν₃(E), ν₂(A₁) and ν₄(E) vibrational modes, respectively. For hannebachite (CaSO₃)₂·H₂O these bands are observed at 1005, 969 and 655 cm⁻¹ with multiple bands for the ν₄(E) mode at 444, 492 and 520 cm⁻¹. The Raman spectrum of hannebachite is very different from that of the compound CaSO₃·2H₂O. It is proposed, on the basis of Raman spectroscopy, that in the mineral hannebachite, the sulfite anion bonds to Ca through the sulfur atom. The Raman spectrum of the mineral orschallite Ca₃[SO₄](SO₃)₂·12H₂O is complex resulting from the overlap of sulfate and sulfite bands. Raman bands at 1005 cm⁻¹, 1096 and 1215 cm⁻¹ are assigned to the (SO₄)²⁻ν₁ symmetric and ν₃ asymmetric stretching modes. The two Raman bands at 971 and 984 cm⁻¹ are attributed to the (SO₃)²⁻ν₃(E) and ν₁(A₁) stretching vibrations. The formation of sulfite compounds in nature offers a potential mechanism for the removal of sulfates and sulfites from soils. Copyright © 2008 John Wiley & Sons, Ltd.     

A vibrational spectroscopic investigation of rhodanine and its derivatives in the solid state

Raman and infrared spectra are reported for rhodanine, 3‐aminorhodanine and 3‐methylrhodanine in the solid state. Comparisons of the spectra of non‐deuterated/deuterated species facilitate discrimination of the bands associated with N H, NH₂, CH₂ and CH₃ vibrations. DFT calculations of structures and vibrational spectra of isolated gas‐phase molecules, at the B3‐LYP/cc‐pVTZ and B3‐PW91/cc‐pVTZ level, enable normal coordinate analyses in terms of potential energy distributions for each vibrational normal mode. The cis amide I mode of rhodanine is associated with bands at ∼1713 and 1779 cm⁻¹, whereas a Raman and IR band at ∼1457 cm⁻¹ is assigned to the amide II mode. The thioamide II and III modes of rhodanine, 3‐aminorhodanine and 3‐methylrhodanine are observed at 1176 and 1066/1078; 1158 and 1044; 1107 and 984 cm⁻¹ in the Raman and at 1187 and 1083; 1179 and 1074; 1116 and 983 cm⁻¹ in the IR spectra, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Vibrational properties of levulinic acid and furan derivatives: Raman spectroscopy and theoretical calculations

In this work, the Raman spectra of furan, furfuryl alcohol (FA), furfural, hydroxymethylfurfural (HMF), and levulinic acid were obtained in the 500 to 4000 cm⁻¹ spectral region at room temperature. Vibrational wavenumbers were calculated for these compounds with the B3LYP method using the 6‐31 + G(2df,p) basis set. The experimentally determined CC and C C wavenumbers for furan and furan derivatives were in good agreement with the calculated wavenumbers without scaling factor, while the calculated CO and C H wavenumbers at ∼1660 and 3000 cm⁻¹, respectively, showed larger deviations from the measured ones. The Raman spectra for furan and furan derivatives showed intense CC bands, whereas the levulinic acid spectrum showed intense C H vibrations with broad doublet CO bands. We also found that an empirical method based on the chemical structure similarities is able to predict the HMF Raman spectrum from the combined furfural and FA spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman scattering of L‐tryptophan enhanced by surface plasmon of silver nanoparticles: vibrational assignment and structural determination

Vibrational bands of L ‐tryptophan which was adsorbed on Ag nanoparticles (∼10 nm in diameter) have been investigated in the spectral range of 200–1700 cm⁻¹ using surface‐enhanced Raman scattering (SERS) spectroscopy. Compared with the normal Raman scattering (NRS) of L ‐tryptophan in either 0.5 M aqueous solution (NRS‐AS) or solid powder (NRS‐SP), the intensified signals by SERS have made the SERS investigation at a lower molecular concentration (5 × 10⁻⁴ M ) possible. Ab initio calculations at the B3LYP/6‐311G level have been carried out to predict the optimal structure and vibrational wavenumbers for the zwitterionic form of L ‐tryptophan. Facilitated with the theoretical prediction, the observed vibrational modes of L ‐tryptophan in the NRS‐AS, NRS‐SP, and SERS spectra have been analyzed. In the spectroscopic observations, there are no significant changes for the vibrational bands of the indole ring in either NRS‐AS, NRS‐SP, or SERS. In contrast, spectral intensities involving the vibrations of carboxylate and amino groups are weak in NRS‐AS and NRS‐SP, but strong in SERS. The intensity enhancement in the SERS spectrum can reach 10³–10⁴‐fold magnification. On the basis of spectroscopic analysis, the carboxylate and amino groups of L ‐tryptophan are determined to be the preferential terminal groups to attach onto the surfaces of Ag nanoparticles in the SERS measurement. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐pressure studies of the micro‐Raman spectra of iron cyanide complexes: Prussian blue (Fe4[Fe(CN)6]3), potassium ferricyanide (K3[Fe(CN)6]), and sodium nitroprusside (Na2[Fe(CN)5(NO)]·2H2O)

The pressure dependences of the peaks observed in the micro‐Raman spectra of Prussian blue (Fe₄[Fe(CN)₆]₃), potassium ferricyanide (K₃[Fe(CN)₆]), and sodium nitroprusside (Na₂[Fe(CN)₅(NO)]·2H₂O) have been measured up to 5.0 GPa. The vibrational modes of Prussian blue appearing at 201 and 365 cm⁻¹ show negative dν/dP values and Grüneisen parameters and are assigned to the transverse bending modes of the Fe C N Fe linkage which can contribute to a negative thermal expansion behavior. A phase transition occurring between 2.0 and 2.8 GPa in potassium ferricyanide is shown by changes in the spectral region 150–700 cm⁻¹. In the spectra of the nitroprusside ion, there are strong interactions between the FeN stretching mode and the FeNO bending and the axial CN stretching modes. The pressure dependence of the NO stretching vibration is positive, 5.6 cm⁻¹ GPa⁻¹, in contrast to the negative behavior in the iron(II)‐meso‐tetraphenyl porphyrinate complex. Copyright © 2011 John Wiley & Sons, Ltd.