Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

Tautomerism and Atropisomerism in Free‐Base (meso)‐Strapped Porphyrins: Static and Dynamic Aspects

We report herein some outstanding examples of atropisomerism and tautomerism in five (meso‐)strapped porphyrins. Porphyrins S0 – S4 have been synthesised, characterised and studied in detail by spectroscopic and spectrometric techniques, and their isomeric purity verified by HPLC analysis. In particular, they exhibit perfectly well‐defined NMR spectra that display distinct patterns depending on their average symmetry at room temperature: C_2v, D_2d, C_2h, C_2v, and D_2h for S0 – S4 , respectively. NH tautomerism was evidenced by variable‐low‐temperature ¹H NMR experiments in [D₂]dichloromethane performed on S0 (Δ${G{{{\ne}\hfill \atop {\rm 298K}\hfill}}}$ =48±1 kJ mol^?1) and S1 (Δ${G{{{\ne}\hfill \atop {\rm 298K}\hfill}}}$ =55±3 kJ mol^?1), which has led to an understanding of the average spectra observed for the five porphyrins at room temperature. On the other hand, S2 and S3 are stable atropisomers at room temperature, easily separated and characterised, as a result of restricted rotation of their strapped bridges due to their high rotational barrier energies. Upon heating to 82 °C, they slowly equilibrate to a thermodynamic ratio of 64:36 in favour of the more stable S2 isomer. This atropisomerisation process was evidenced by ¹H NMR spectroscopy and monitored by HPLC, from which high rotational energy barriers of 115.2 (Δ${G{{{\ne}\hfill \atop {\rm S2}\rightarrow {\rm S3}\hfill}}}$ ) and 116.9 kJ mol^?1 (Δ${G{{{\ne}\hfill \atop {\rm S2}\rightarrow {\rm S3}\hfill}}}$ ) were deduced.     

Ultrafast Deactivation Mechanism of the Excited Singlet in the Light‐Induced Spin Crossover of [Fe(2,2′‐bipyridine)3]2+

The mechanism of the light‐induced spin crossover of the [Fe(bpy)₃]²⁺ complex (bpy=2,2′‐bipyridine) has been studied by combining accurate electronic‐structure calculations and time‐dependent approaches to calculate intersystem‐crossing rates. We investigate how the initially excited metal‐to‐ligand charge transfer (MLCT) singlet state deactivates to the final metastable high‐spin state. Although ultrafast X‐ray free‐electron spectroscopy has established that the total timescale of this process is on the order of a few tenths of a picosecond, the details of the mechanisms still remain unclear. We determine all the intermediate electronic states along the pathway from low spin to high spin and give estimates for the deactivation times of the different stages. The calculations result in a total deactivation time on the same order of magnitude as the experimentally determined rate and indicate that the complex can reach the final high‐spin state by means of different deactivation channels. The optically populated excited singlet state rapidly decays to a triplet state with an Fe d⁶(${{\rm t}{{5\hfill \atop {\rm 2g}\hfill}}}$ ${{\rm e}{{1\hfill \atop {\rm g}\hfill}}}$ ) configuration either directly or by means of a triplet MLCT state. This triplet ligand‐field state could in principle decay directly to the final quintet state, but a much faster channel is provided by internal conversion to a lower‐lying triplet state and subsequent intersystem crossing to the high‐spin state. The deactivation rate to the low‐spin ground state is much smaller, which is in line with the large quantum yield reported for the process.     

Calixarene‐Based Surfactants: Conformational‐Dependent Solvation Shells for the Alkyl Chains

Thermodynamic parameters obtained from studying the micellization of amphiphilic p‐sulfonatocalix[n]arenes were correlated with the alkyl chain length and with the number of monomeric units (n) in the calix[n]arene structure. The micellization Gibbs free energy (Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ ) becomes more negative upon increasing the alkyl chain length of the p‐sulfonatocalix[4]arene. This is in agreement with the trend generally observed for other surfactants. However, the Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ value for transferring one CH₂ group from the bulk aqueous medium to the micelle [Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ (CH₂)] is lower than the value generally observed for single‐chain surfactants, suggesting the existence of intramolecular interactions between the alkyl chains of the free unimers. On the other hand, the critical micelle concentration (cmc; per alkyl chain unit) increased with the increasing number of monomeric units. These results are explained on the basis of the conformation adopted by the calixarene in the bulk solution. The calix[4]arene derivatives are preorganized into the cone conformation, which is favorable for the formation of globular aggregates. The calix[6]arene and calix[8]arene derivatives do not adopt cone conformations. Changing these conformations to the more favorable cone conformer in the aggregates implies an energetic cost that contributes to making Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ less efficient. In the case of the calix[6]arene derivative this energetic cost is enthalpic, whereas in the case of the octamer it is both enthalpic and entropic. Both the Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ (CH₂) value and the change in heat capacity (ΔC${{\rm p}{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ ) seem to indicate that for the cone calix[4]arene derivatives all alkyl chains are solvated by the same hydration shell, whereas in the case of the highly flexible calix[8]arene derivative each alkyl chain is individually hydrated.     

Guanidinium Alkynesulfonates with Single‐Layer Stacking Motif: Interlayer Hydrogen Bonding Between Sulfonate Anions Changes the Orientation of the Organosulfonate R Group from “Alternate Side” to “Same Side”

Hydrolyses of HC?CSO₃SiMe₃ ( 1 ) and CH₃C?CSO₃SiMe₃ ( 2 ) lead to the formation of acetylenic sulfonic acids HC?CSO₃H?2.33 H₂O ( 3 ) and CH₃C?CSO₃H?1.88 H₂O ( 4 ). These acids were reacted with guanidinium carbonate to yield [⁺C(NH₂)₃][HC?CSO₃^?] ( 5 ) and [⁺C(NH₂)₃][CH₃C?CSO₃^?] ( 6 ). Compounds 1 – 6 were characterized by spectroscopic methods, and the X‐ray crystal structures of the guanidinium salts were determined. The X‐ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions, whereas association of these ions in 6 is achieved through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) and ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) interactions. The ribbons in 5 associate into 2D sheets through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{3\hfill \atop 6\hfill}}}$ (12) rings, whereas those in 6 are connected through ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) and ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{4\hfill \atop 6\hfill}}}$ (14) rings. Compound 6 exhibits a single‐layer stacking motif similar to that found in guanidinium alkane‐ and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single‐layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Solar Fuels: Photoelectrosynthesis of CO from CO2 at p‐Type Si using Fe Porphyrin Electrocatalysts

Photoelectrocatalytic conversion of CO₂ to CO can be driven at a boron‐doped, hydrogen terminated, p‐type silicon electrode using a meso‐tetraphenylporphyrin Fe^III chloride in the presence of CF₃CH₂OH as a proton source and 0.1 M [NBu₄][BF₄]/MeCN/5 % DMF (v/v) as the electrolyte. Under illumination with polychromatic light, the photoelectrocatalysis operates with a photovoltage of about 650 mV positive of that for the dark reaction. Carbon monoxide is produced with a current efficiency >90 % and with a high selectivity over H₂ formation. Photoelectrochemical current densities of 3 mA cm^?2 at ?1.1 V versus SCE are typical, and 175 turnovers have been attained over a 6 h period. Cyclic voltammetric data are consistent with a turnover frequency of ${k{{{\rm Si}\hfill \atop {\rm obs}\hfill}}}$ =0.24×10⁴ s^?1 for the photoelectrocatalysis at p‐type Si at ?1.2 V versus SCE this compares with ${k{{{\rm C}\hfill \atop {\rm obs}\hfill}}}$ =1.03×10⁴ s^?1 for the electrocatalysis in the dark on vitreous carbon at a potential of ?1.85 V versus SCE.     

Tuning the Photocatalytic Activity of CdS Nanocrystals through Intermolecular Interactions in Ionic‐Liquid Solvent Systems

Synthetic solvent systems for the fine‐tuned preparation of CdS nanocrystallites, active in visible‐light photocatalytic hydrogen production, were studied. To control crystallite size and spectral properties, the CdS crystals were synthesised by using different solvent systems, containing a series of tetrabutylammonium amino carboxylate ionic liquids as the crystal‐growth control agents. Six samples of CdS, all with similar physical and spectral properties, exhibited greatly varying photocatalytic activity, with the most active sample outperforming the least active one by almost 60 %. To rationalise this effect, the intermolecular interactions of the synthesis solvent system with the growing CdS nanocrystallites were characterised by using the Reichart betaine dye and the ${E{{{\rm N}\hfill \atop {\rm T}\hfill}}}$ polarity scale. A correlation was observed between the ${E{{{\rm N}\hfill \atop {\rm T}\hfill}}}$ values of the solvent system and the photocatalytic activity of the CdS nanocrystallite, suggesting that the hydrogen‐bond‐donating ability and/or dipolarity/polarisability interactions of the solvent system led to the preferential formation of active surfaces/surface sites on the CdS crystals.     

Characterizing Methyl‐Bearing Side Chain Contacts and Dynamics Mediating Amyloid β Protofibril Interactions Using 13Cmethyl‐DEST and Lifetime Line Broadening

Many details pertaining to the formation and interactions of protein aggregates associated with neurodegenerative diseases are invisible to conventional biophysical techniques. We recently introduced ¹⁵N dark‐state exchange saturation transfer (DEST) and ¹⁵N lifetime line‐broadening to study solution backbone dynamics and position‐specific binding probabilities for amyloid β (Aβ) monomers in exchange with large (2–80 MDa) protofibrillar Aβ aggregates. Here we use ¹³C_methyl DEST and lifetime line‐broadening to probe the interactions and dynamics of methyl‐bearing side chains in the Aβ‐protofibril‐bound state. We show that all methyl groups of Aβ40 populate direct‐contact bound states with a very fast effective transverse relaxation rate, indicative of side‐chain‐mediated direct binding to the protofibril surface. The data are consistent with position‐specific enhancements of ¹³C_methyl‐${R{{{\rm tethered}\hfill \atop 2\hfill}}}$ values in tethered states, providing further insights into the structural ensemble of the protofibril‐bound state.     

Transport,Electrochemical and Thermophysical Properties of Two N‐Donor‐Functionalised Ionic Liquids

Two N‐donor‐functionalised ionic liquids (ILs), 1‐ethyl‐1,4‐dimethylpiperazinium bis(trifluoromethylsulfonyl)amide ( 1 ) and 1‐(2‐dimethylaminoethyl)‐dimethylethylammonium bis(trifluoromethylsulfonyl)amide ( 2 ), were synthesised and their electrochemical and transport properties measured. The data were compared with the benchmark system, N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ( 3 ). Marked differences in thermal and electrochemical stability were observed between the two tertiary‐amine‐functionalised salts and the non‐functionalised benchmark. The former are up to 170 K and 2 V less stable than the structural counterpart lacking a tertiary amine function. The ion self‐diffusion coefficients (D_i) and molar conductivities (Λ) are higher for the IL with an open‐chain cation ( 2 ) than that with a cyclic cation ( 1 ), but less than that with a non‐functionalised, heterocyclic cation ( 3 ). The viscosities (η) show the opposite behaviour. The Walden [Λ∝(1/η)^t] and Stokes–Einstein [D_i/T)∝(1/η)^t] exponents, t, are very similar for the three salts, 0.93–0.98 (±0.05); that is, the self‐diffusion coefficients and conductivity are set by η. The D_i for 1 and 2 are the same, within experimental error, at the same viscosity, whereas Λ for 1 is approximately 13 % higher than that of 2 . The diffusion and molar conductivity data are consistent, with a slope of 0.98±0.05 for a plot of ln(ΛT) against ln(D₊+D_?). The Nernst–Einstein deviation parameters (Δ) are such that the mean of the two like‐ion VCCs is greater than that of the unlike ions. The values of Δ are 0.31, 0.36 and 0.42 for 3 , 1 and 2 , respectively, as is typical for ILs, but there is some subtlety in the ion interactions given 2 has the largest value. The distinct diffusion coefficients (DDC) follow the order ${D{{{\rm d}\hfill \atop - - \hfill}}}$ <${D{{{\rm d}\hfill \atop ++\hfill}}}$ <${D{{{\rm d}\hfill \atop +- \hfill}}}$ , as is common for [Tf₂N]^? salts. The ion motions are not correlated as in an electrolyte solution: instead, there is greater anti‐correlation between the velocities of a given anion and the overall ensemble of anions in comparison to those for the cationic analogue, the anti‐correlation for the velocities of which is in turn greater than that for a given ion and the ensemble of oppositely charged ions, an observation that is due to the requirement for the conservation of momentum in the system. The DDC also show fractional SE behaviour with t～0.95.     

Non‐Isothermal Decomposition Kinetics,Specific Heat Capacity and Adiabatic Time‐to‐explosion of a Novel High Energy Material: 1‐Amino‐1‐Methylamino‐2,2‐Dinitroethylene (AMFOX‐7)

A novel high energy material, 1‐amino‐1‐methylamino‐2,2‐dinitroethlyene (AMFOX‐7), was synthesized by the reaction of 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) and methylamine aqueous solution in N‐methyl pyrrolidone at 80°C. The thermal behavior and non‐isothermal decomposition kinetics of AMFOX‐7 were studied with DSC and TG/DTG methods. The kinetic equation of thermal decomposition reaction can be expressed as: $ {\rm d\alpha /d}T = \frac{{10^{21.03}}}{{\rm \beta}}\frac{3}{2}\left({1 - {\rm \alpha}} \right)\left[{- 1{\rm n}\left({{\rm 1} - {\rm \alpha}} \right)} \right]^{\frac{1}{3}} \exp \left({- 2.292 \times 10^5 {\rm /}RT} \right) A novel high energy material, 1‐amino‐1‐methylamino‐2,2‐dinitroethlyene (AMFOX‐7), was synthesized by the reaction of 1,1‐diamino‐2,2‐dinitroethylene (FOX‐7) and methylamine aqueous solution in N‐methyl pyrrolidone at 80°C. The thermal behavior and non‐isothermal decomposition kinetics of AMFOX‐7 were studied with DSC and TG/DTG methods. The kinetic equation of thermal decomposition reaction can be expressed as: $ {\rm d\alpha /d}T = \frac{{10^{21.03}}}{{\rm \beta}}\frac{3}{2}\left({1 - {\rm \alpha}} \right)\left[{- 1{\rm n}\left({{\rm 1} - {\rm \alpha}} \right)} \right]^{\frac{1}{3}} \exp \left({- 2.292 \times 10^5 {\rm /}RT} \right) $. The critical temperature of thermal explosion of AMFOX‐7 is 244.89°C. The specific heat capacity of AMFOX‐7 was determined with micro‐DSC method and theoretical calculation method, and the standard molar specific heat capacity is 199.39 J·mol^?1·K^?1 at 298.15 K. Adiabatic time‐to‐explosion of AMFOX‐7 was also calculated to be 215.41 s. AMFOX‐7 has higher thermal stability than FOX‐7.     

Multivalent Recognition of Concanavalin A by {Mo132} Glyconanocapsules—Toward Biomimetic Hybrid Multilayers

Herein, we consider Müller’s spherical, porous, anionic, molybdenum oxide based capsule, (NH₄)₄₂‐ [{(Mo^VI)Mo^VI₅O₂₁(H₂O)₆}₁₂{Mo^V₂O₄(CH₃COO)}₃₀]?10 CH₃COONH₄? 300 H₂O≡(NH₄)₄₂? 1 a ?crystal ingredients≡ 1 , {Mo₁₃₂}, as an effective sugar‐decorated nanoplatform for multivalent lectin recognition. The ion‐exchange of NH₄⁺ ions of 1 with cationic‐sugars, D ‐mannose‐ammonium chloride ( 2 ) or D ‐glucose‐ammonium chloride ( 3 ) results in the formation of glyconanocapsules (NH₄)_42?n 2 _n? 1 a and (NH₄)_42?m 3 _m? 1 a . The Mannose (NH₄)_42?n 2 _n? 1 a capsules bind selectively Concanavalin A (Con A) in aqueous solution, giving an association avidity constant of ${K{{{\rm multi}\hfill \atop {\rm a}\hfill}}}$ =4.6×10⁴ M ^?1 and an enhancement factor of β=K${{{{\rm multi}\hfill \atop {\rm a}\hfill}}}$ /K${{{{\rm mono}\hfill \atop {\rm ass}\hfill}}}$ =21.9, reminiscent of the formation of “glycoside clusters” on the external surface of glyconanocapsule. The glyconanocapsules (NH₄)_42?n 2 _n? 1 a and (NH₄)_42?m 3 _m? 1 a self‐assemble in “hybrid multilayers” by successive layer‐by‐layer deposition of (NH₄)_42?n 2 _n? 1 a or (NH₄)_42?m 3 _m? 1 a and Con A. These architectures, reminiscent of versatile mimics of artificial tissues, can be easily prepared and quantified by using quartz crystal microgravimetry (QCM). The “biomimetic hybrid multilayers” described here are stable under a continual water flow and they may serve as artificial networks for a greater depth of understanding of various biological mechanisms, which can directly benefit the fields of chemical separations, sensors or storage‐delivery devices.     

A First‐Principles Study on the Interaction between Alkyl Radicals and Graphene

The interaction between alkyl radicals and graphene was studied by means of dispersion‐corrected density functional theory. The results indicate that isolated alkyl radicals are not likely to be attached onto perfect graphene. It was found that the covalent binding energies are low, and because of the large entropic contribution, Δ${G{{{\ominus}\hfill \atop 298\hfill}}}$ is positive for methyl, ethyl, isopropyl, and tert‐butyl radicals. Although the alkylation may proceed by moderate heating, the desorption barriers are low. For the removal of the methyl and tert‐butyl radicals covalently bonded to graphene, 15.3 and 2.4 kcal mol^?1 are needed, respectively. When alkyl radicals are agglomerated, the binding energies are increased. For the addition in the ortho position and on opposite sides of the sheet, the graphene–CH₃ binding energy is increased by 20 kcal mol^?1, whereas for the para addition on the same side of the sheet, the increment is 9.4 kcal mol^?1. In both cases, the agglomeration turns the Δ${G{{{\ominus}\hfill \atop 298\hfill}}}$ <0. For the ethyl radical, the ortho addition on opposite sides of the sheet has a negative Δ${G{{{\ominus}\hfill \atop 298\hfill}}}$ , whereas for isopropyl and tert‐butyl radicals the reactions are endergonic. The attachment of the four alkyl radicals under consideration onto the zigzag edges is exergonic. The noncovalent adsorption energies computed for ethyl, isopropyl, and tert‐butyl radicals are significantly larger than the graphene–alkyl‐radical covalent binding energies. Thus, physisorption is favored over chemisorption. As for the Δ${G{{{\ominus}\hfill \atop 298\hfill}}}$ for the adsorption of isolated alkyl radicals, only the tert‐butyl radical is likely to be exergonic. For the phenalenyl radical we were not able to locate a local minimum for the chemisorbed structure since it moves to the physisorbed structure. An important conclusion of this work is that the consideration of entropic effects is essential to investigate the interaction between graphene and free radicals.     

Lanthanoid/Alkali Metal β‐Triketonate Assemblies: A Robust Platform for Efficient NIR Emitters

The reaction of hydrated lanthanoid chlorides with tribenzoylmethane and an alkali metal hydroxide consistently resulted in the crystallization of neutral tetranuclear assemblies with the general formula [Ln(Ae ? HOEt)( L )₄]₂ (Ln=Eu³⁺, Er³⁺, Yb³⁺; Ae=Na⁺, K⁺, Rb⁺). Analysis of the crystal structures of these species revealed a coordination geometry that varied from a slightly distorted square antiprism to a slightly distorted triangular dodecahedron, with the specific geometrical shape being dependent on the degree of lattice solvation and identity of the alkali metal. The near‐infrared (NIR)‐emitting assemblies of Yb³⁺ and Er³⁺ showed remarkably efficient emission, characterized by significantly longer excited‐state lifetimes (τ_obs≈37–47 μs for Yb³⁺ and τ_obs≈4–6 μs for Er³⁺) when compared with the broader family of lanthanoid β‐diketonate species, even in the case of perfluorination of the ligands. The Eu³⁺ assemblies show bright red emission and a luminescence performance (τ_obs≈0.5 ms, ${{\Phi}{{{\rm L}\hfill \atop {\rm Ln}\hfill}}}$ ≈35–37 %, η_sens≈68–70 %) more akin to the β‐diketonate species. The results highlight that the β‐triketonate ligand offers a tunable and facile system for the preparation of efficient NIR emitters without the need for more complicated perfluorination or deuteration synthetic strategies.     

RhI‐Catalyzed Regio‐ and Stereospecific Carbonylation of 1‐(1‐Alkynyl)cyclopropyl Ketones: A Modular Entry to Highly Substituted 5,6‐Dihydrocyclopenta[c]furan‐4‐ones

Efficient route : A novel Rh^I‐catalyzed regio‐ and stereospecific carbonylation reaction of (1‐alkynyl)cyclopropyl ketones by selective activation of a carbon? carbon σ bond of the cyclopropane ring was demonstrated (see scheme). This method provides a general, efficient, stereoselective route to synthesise 1,3,5‐trisubstituted and 1,3,5,6‐tetrasubstituted 5,6‐dihydrocyclopenta[c]furan‐4‐one with convertible functional groups.

     

An efficient synthesis of 5‐benzoyloxazolines by regio‐ and stereo‐controlled reaction of N‐substituted 2‐benzoylaziridines under microwave irradiation

Several N‐acyl‐2‐benzoylaziridines were prepared conveniently in good to high yields (71‐93%) and used in the preparation of 5‐benzoyloxazolines (76‐91%) by a regio‐ and stereo‐controlled reaction in the presence of Nal as an efficient catalyst under microwave irradiation in short reaction times (5‐10 mins). The structure of the regioisomeric product was confirmed by X‐ray analysis.     

Highly Efficient Access to Bi‐ and Tricyclic Ketals through Gold‐Catalyzed Tandem Reactions of 4‐Acyl‐1,6‐diynes

Single step : Fused bicyclic and bridged tricyclic ketals were synthesized in a single step from the reactions of easily available 4‐acyl‐1,6‐diynes with H₂O and alkanols (see scheme). The highly efficient AuCl₃‐catalyzed multicomponent domino reactions, involving five C ? O bond formations, can proceed in a highly regio‐ and diastereoselective manner at room temperature under air and lead to structures of high molecular complexity from simple starting materials in an atom economic way.

     

Surface‐Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine‐Coordinated Heme Protein

Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine‐coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self‐assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl‐terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this “disc” orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi‐reversible redox behavior with rate constant k_s values between 0.93 and 2.86 s^?1 and apparent formal potentials ${E{{0{^{\prime }}\hfill \atop {\rm app}\hfill}}}$ between ‐131.1 and ‐249.1 mV. On the MUA/MU‐modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH.