Extended Hückel MO calculations of the conformation of several amino acids

The conformation of the amino acid residues, glycine, alanine, proline, and phenylalanine have been predicted from molecular orbital calculations of appropriate model compounds. Using the current main chain rotation convention (, ) the principle conformations were found to be glycine (0, 0), alanine (240, 240), proline (120, 330) and phenylalanine (30, 330). Several secondary conformations were also found for glycine. A comparison of the predicted conformations is in good agreement with experimental data on comparable residues or model compounds.Supported by National Institutes of Health Grants No. FR 5409-07 and GM 16312-01.Recipient of a Public Health Service Research Career Development Award AM 1159-01.     

Oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82− and by IO4− in binary aqueous solvent mixtures at pressures up to 1.25 kbar

Second order rate constants and activation parameters H, S, and V have been measured for the oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82– and by IO4– in highly aqueous H2O – t-BuOH mixtures. The changes in solvation on going from the initial to the transition state are discussed on the basis of the transfer functions Gto, Hto and Sto. Whereas Gt changes smoothly as the proportion of t-BuOH increases, the plots of Ht and TSt exhibit mirror behaviour and pass through extrema located around x2(t- BuOH)=0.038. Information on the role of solvation is complemented by the determination of activation volumes. These are discussed in terms of intrinsic and solvational contributions. It is proposed that changes in hydrophobic hydration are of principal importance in determining the response of H, S, and V to changes in solvent composition in H2O – t-BuOH mixtures.     

Measurement of specific heat and energetic characterization of materials up to high temperatures

A new DSC system has been developed which not only allows quantitative results in the temperature of –160C to 700C, but also allows the quantitative determination of a variety of material properties up to 1500C. For example, the specific heat of materials can be measured to at least 1400C, while enthalpies, etc. can be measured to 1500C.

---

Zusammenfassung Ein neuartiges DSC Messystem (Netzsch DSC 404) wurde entwickelt, das sich durch hohe Reproduzierbarkeit der Basislinie, grosse Empfindlichkeit und breiten Temperaturanwendungsbereich (–160C bis 700C resp. bis 1500C) auszeichnet. Die Messanordnung ermöglicht die Verwendung von unterschiedlichen GasatmosphÄren als auch Messungen im Vakuum. Es werden Beispiele der Bestimmung von SchmelzvorgÄngen, der Glasumwandlungstemperatur, der KristallinitÄt und der spezifischen WÄrme, sowohl für Polymere als auch für anorganische Materialien dargestellt und diskutiert.

     

Surface tension as a function of temperature for some molten metals

Results are given for Sn, In, and Ge from the melting points up to 1700 C, for Pb up to 1400 C, for Tl up to 1100 C, for Bi up to 1300 C, and for Cd up to 600 C. In every case the surface tension is a linear function of temperature. Estimates are made of the critical temperatures of Cd and Ge. It is shown that deductions on the structure of the melts can be drawn from surface-tension data.     

Molecular structure of aniline in the gaseous phase: A concerted study by electron diffraction and ab initio molecular orbital calculations

The molecular structure of free aniline has been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF and MP2 levels of theory, using the 6-31G^*(6D) basis set. Least-squares refinement of a model withC _s symmetry, with constraints from MP2 calculations, has led to an accurate determination of the C-C-C angle at theipso position of the benzene ring, =119.0±0.2 (where the uncertainty represents total error). This parameter provides information on the extent of the interaction between the nitrogen lone pair and the system of the benzene ring, and could not be determined accurately by microwave spectroscopy. The angles at theortho, meta, andpara positions of the ring are 120.3±0.1, 120.7±0.1, and 119.0±0.3, respectively. Important bond distances are r _g(C-C)=1.398±0.003 å andr _g(C-N) =1.407±0.003 å. The effective dihedral angle between the H-N-H plane and the ring plane, averaged over the large-amplitude inversion motion of the amino group, is ¦¦=44±4. The equilibrium dihedral angle is calculated to be 41.8 at the HF level and 43.6 at the MP2 level, in agreement with far-infrared spectroscopic information. The MO calculations predict that the differencer(C_ortho-C_meta) -r(C_ipso-C_ortho) is 0.008–0.009 å. They also indicate that the nitrogen atom is displaced from the ring plane, on the side opposite to the amino hydrogens. The displacement is 0.049 å at the HF level and 0.072 å at the MP2 level. The two calculations, however, yield very different patterns for the minute deviations from planarity of the ring carbons.     

Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

Analytische Dichtegradienten-Zentrifugation bei Temperaturen zwischen +4?C und +40?C

Zusammenfassung Es wird gezeigt, da\ die bei der analytischen Dichtegradienten-Zentrifugation benötigten Parameter, die von Hearst u. Mitarb. tabelliert wurden, auch für andere Temperaturen als 25C gültig sind. Das ist von gro\er Wichtigkeit, da hochempfindliche Enzyme nur bei Temperaturen um + 4C lÄnger als 24 h nativ bleiben. Man ist deshalb auf eine Zentrifugation bei dieser Temperatur angewiesen. Weil man oft nur sehr wenig Substanz isolieren kann, bleibt nur die Dichtegradienten-Zentrifugation als Methode der Wahl. Ein Vergleich der gemessenen Molekulargewichte bei 6C und 25C zeigt keine Abweichungen, die über die Me\genauigkeit hinausgehen.

---

Analytical density gradient centrifugation at temperatures between +4C and +40 C

It is shown that all the parameters needed for analytical density gradient centrifugation tabulated by Hearst et al. for 25C are valid for other temperatures, too. This will be important in the investigation of highly sensitive enzymes which are only stable at temperatures near +4C over a period of 24 h. Comparison of molecular weights determined at 6C und 25C shows no difference greater than 2%, which will be within the experimental error.

---

---

Das Bundesministerium für Bildung und Wissenschaft hat diese Arbeiten gro\zügig unterstützt.     

Dynamic mechanical properties of irradiated polyvinyl chloride

Summary Effects of gamma radiation on the dynamic mechanical properties of polyvinyl chloride (PVC) have been studied at audio frequencies from 80 K to 450 K for doses up to 1400 megarads. Two damping peaks were observed between 80 K and 400 K. The onset of main relaxation near 350 K shifted to lower temperatures at low doses, and then shifted to higher temperatures at a dose of 1400 megarads. Only slight changes are discernible in the damping peak near 250 K upon irradiation, but definite variations are noted in the modulus curves. Upon irradiation to 270 megarads an additional damping peak appeared near 150 K accompanied by an increase in modulus at lower temperatures. The height of this peak increased with increasing radiation dose.Crosslinking was confirmed from rubber elastic behavior, swelling, and solvent extraction studies. Some tentative explanations for the changes occurring in the dynamic mechanical properties of irradiated PVC are given in terms of crosslinking, loss of crystallinity, and dehydrochlorination followed by the formation of conjugated series of double bonds.

---

Zusammenfassung Es wurde die Wirkung von-Strahlung auf die dynamisch-mechanischen Eigenschaften von Polyvinylchlorid (PVC) bei Hörfrequenzen von 80 K bis 450 K für Dosen bis zu 1400 Megarad untersucht. Zwei Dämpfungspiks zeigen sich zwischen 80 und 400 K. Das Einsetzen der Hauptrelaxation nahe 350 K verlagert sich zu tieferen Temperaturen bei kleineren Dosen, um dann zu höheren Temperaturen bei einer Dosis von 1400 Megarad hinaufzugehen. Nur leichte änderungen sind im Dämpfungspik nahe 250 K durch die Strahlung zu beobachten; aber in der Modulkurve werden definierte Variationen erkennbar. Nach Bestrahlung mit 270 Megarad erscheint ein zusätzlicher Dämpfungspik nahe 150 K, begleitet durch ein Anwachsen des Moduls zu tieferen Temperaturen. Die Höhe dieses Piks wächst mit wachsender Strahlungsdosis.Die Vernetzung wurde aus dem gummielastischen Verhalten, der Quellung und aus Lösungsmittel-Extraktionen bestimmt. Die im dynamisch-mechanischen Verhalten durch die Strahlung des PVC auftretenden änderungen werden auf Grund der Vernetzung, der Abnahme an Kristallinität, der Dehydrochlorierung — gefolgt durch die Bildung von Serien konjugierter Doppelbildungen — erklärt.

---

---

This work was supported in part by the National Science Foundation and the National Aeronautics and Space Administration.     

Thermal study of synthesis of cryptohalite

The present work represents a thermal study of synthesis of cryptohalite (Ammonium silicon hexafluoride) by sintering of quartz with ammonium fluoride using a derivatograph. The reaction products were identified microscopically and by using a Siemens Crystalloflex diffractometer. The DTA curves indicate that the intensive formation of cryptohalite takes place at 125–155C by an endothermic reaction. Cryptohalite is unstable and dissociates at 320–335C as represented by the sharp and large endothermic peaks at these temperatures.The resulted cryptohalite is colorless in thin sections and crystallizes in cubic system, in the form of octahedral crystals with perfect (111) cleavage. The dimorph bararite is not detected in all runs.

---

Zusammenfassung Mittels eines Derivatographen wurde die Synthese von Kryptohalit (Ammoniumsiliziumhexafluorid) durch Sintern von Quarz mit Ammoniumfluorid thermisch untersucht. Die Reaktionsprodukte wurden mikroskopisch und mit Hilfe eines Siemens-Crystalloflex Diffraktometers identifiziert. Die DTA-Kurven zeigen, da\ die intensive Bildung von Kryptohalit in einer endothermen Reaktion bei 125–155C abläuft. Wie durch die scharfen und intensiven endothermen Peaks bei 320–335C gezeigt wird, ist Kryptohalit bei dieser Temperatur instabil und dissoziiert.Das erhaltene Kryptohalit ist in dünnen Schnitten farblos und kristallisiert im kubischen System in der Form von oktaedrischen Kristallen mit perfekter (111) Spaltbarkeit. Das dimorphe Bararit konnte in keinem der Versuche beobachtet werden.

     

Fest-Gas-Chromatographie von Metallchloriden

Zusammenfassung Es wird gezeigt, da\ Graphit ein geeignetes Trennmaterial für die fest-gas-chromatographische Trennung bestimmter Metallchloride ist.Für die Trennversuche wurde ein GerÄt gebaut, bei dem Probengeber, SÄule und Detektor aus Pyrexglas bestehen. Als Detektor wurde eine WÄrmeleitfÄhigkeitszelle mit HitzdrÄhten aus Platin verwendet. Mit einem speziell konstruierten Probengeber konnten die festen Metallchloride dosiert werden. Als TrÄgergas diente Helium.An einer 2,5 m langen SÄule und mit einer Füllung aus synthetischem, hochgereinigtem Graphit (Korngrö\e 0,4–0,5 mm) konnten z.B. getrennt werden: AlCl₃/GaCl₃ bei 300C, NbCl₅/ZrCl₄ bei 310C, TaCl₅/ NbCl₅ bei 275C, NbCl₅/NbOCl₃ bei 450C, HfCl₄/ZrCl₄ bei 300C, AlCl₃/ HfCl₄ ZrCl₄ bei 310C.

---

Solid-gas chromatography of metal chlorides

It has been found that graphite is a suitable stationary phase for separating metal chlorides by the technique of solid gas chromatography. For the separations an all-Pyrex construction was used. The detector was of the heat-conductivity type with platinum filaments. A special construction permitted injection of the solid metal chlorides. Helium was used as carrier gas. The following mixtures could be separated on a 2.5 m column filled with synthetic, highly purified graphite (grain size 0.4–0.5 mm): AlCl₃/GaCl₃ at 300C, NbCl₅/ZrCl₄ at 310C, TaCl₅/NbCl₅ at 275C, NbCl₅/NbOCl₃ at 450C, HfCl₄/ZrCI₄ at 300C, AlCl₃/HfCl₄/ZrCl₄ at 310C.

---

---

Herrn Prof. Dr. W. Rüdorff danke ich sehr herzlich für sein förderndes Interesse und für die Unterstützung dieser Arbeit mit Institutsmitteln. Mein Dank gilt auch der Deutschen Forschungsgemeinschaft und dem Fonds der Chemischen Industrie für die Bereitstellung von Sachmitteln.     

Activation thermodynamic parameters of binary mixtures of propionic acid ando-substituted anilines

Variations of densities and viscosities with temperature and composition are reported for binary liquid mixtures containing propionic acid+aniline (I),+o-toluidine (II),+o-anisidine (III), and+o-chloroaniline (IV). Entropies S _m and enthalpies H _m of activation as functions of the composition of the mixtures, as well as free energies of activation G _m at 10, 20, 30, 40, and 50°C and different compositions were calculated by means of Eyring's equation. The formation of activated complexes between the components of these binary mixtures is postulated and claimed to result from acid-base and hydrogen bonding exchange interactions.     

Swelling equilibrium and preferential sorption of crosslinked poly(methyl methacrylate) in the mixture acetonitrile + n-butanol

Measurements of preferential sorption,( ₃), determined by refractometry, and swelling equilibrium, ₃ ^–1, of PMMA networks have been carried out in the cosolvent mixture MeCN+BuOH at 25 and 49 C. With an intermediate mixture composition, ₃ ^–1 passes through a maximum at both temperatures. At 25 C MeCN is preferentially adsorbed by the network over most of the composition range, but a small inversion is detected. At 49 C MeCN is preferentially adsorbed over all the composition range.The behavior of the system crosslinked PMMA/MeCN + BuOH is compared with the results obtained for solutions of linear PMMA in mixtures formed by the same two solvents, MeCN and BuOH.     

Kinetics and mechanism of the interaction of DL-methionine with cis-diaquaethylenediamine platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of DL-methionine with [Pt(en)(H2O)2]2+ have been studied spectrophotometrically as a function of [Pt(en)(H2O)22+], [DL-methionine], PH and temperature. The reaction proceeds via a rapid outer sphere association followed by two slow consecutive steps having first order dependence on the aqua ion and methionine concentrations. Activation parameters have been evaluated using the Eyring equation. The low H1 (15.6 kJ mol–1) and large negative value of S1 (–230 J K–1 mol–1) as well as H2 (19.5 kJ mol–1) and S2 (–226 J K–1 mol–1) indicate an associative mode of activation for both the aqua ligand substitution processes in the two consecutive steps.     

Thermal behaviour of chemically deintercalated Li1−1Ni1+xO2

The thermal behaviour of chemically deintercalated samples obtained by HCl treatment of non-stoichiometric Li/Ni mixed oxides is studied. A multi-step reduction of Ni with O₂ evolution is observed between room temperature and 800C. Two cation redistribution processes are shown by the exothermal occurrence of a spinel phase at 300C and the endothermal reduction to a rock-salt phase with random distribution of Li and Ni cations in octahedral sites at 800C.The authors wish to express their acknowledgement to CICYT and PFPI for financial support.     

Study of phenolic resin/EVA blends by thermal analysis

The properties of polymeric blends originate from the synergistic association of their components. In this investigation, phenolic resins obtained by the reaction of cashew-nut shell liquid (CNSL) and aldehyde are used in several applications. Mixtures of CNSL with industrial reject ethylene-co-vinyl acetate (EVA reject) were prepared with an EVA reject content up to 70%. The thermal compatibility and stability were evaluated by means of thermogravimetry (TG), derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC). For blends containing a high percentage of EVA reject, the TG curves clearly show two decomposition stages, one at 350C and the other at 450C (onset 467C). The DIG curves of the blend containing 70% CNSL exhibit decomposition at 240C. The DSC curves show that the samples containing a high percentage of EVA reject are incompatible, withT _g values around –30C.The authors would like to thank PETROBRAS/CENPES/DIQUIM for the NMR facilities and thermal measurements.     

The kinetics and mechanism of aquation and base hydrolysis of the cis-[Co(cyclen)Cl2]+ cation (cyclen=1,4,7,10-tetraazacyclododecane)

The aquation of cis-[Co(cyclen)Cl2]+ (cyclen=1,4,7,10-tetraazacyclododecane) has been studied over a range of temperatures with 0.1 mol dm–3 HNO3 as solvent. At 25°C, kaq=4.5×10–3 s–1 with H=78 kJ mol–1 and S298=–21 J K–1 mol–1. Base hydrolysis of cis-[Co(cyclen)Cl2]+ is extremely rapid with kOH=2.1×107 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3. This is the largest rate constant so far reported for the base hydrolysis of a cis-dichloro-complex of a saturated macrocycle. The activation parameters, H=53 kJ mol–1 and S298=73 J K–1 mol–1 are consistent with a mechanism in which deprotonation of the substrate is rate-determining. This conclusion is confirmed by the observation of general base catalysis by formate ion. The Brønsted value for the reaction is ca. 0.72 and SN1(CB) and E2 mechanisms are considered to account for the kinetic results. Base hydrolysis of cis-[Co(cyclen)(OH)Cl]+ has also been studied in the pH range 6.5 to 8.7. The value of kOH=3.8×102 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3 with H=110 kJ mol–1 and S298=171 J K–1 mol–1 are consistent with an SN1(CB) mechanism.     

Thermal decomposition of basic cobalt and copper carbonates

Basic cobalt and copper carbonates were prepared by precipitation from solutions of their nitrates using KHCO₃ at room temperature in CO₂ atmosphere. The thermal decomposition of the prepared basic carbonates was studied by means of TG and DTA techniques and the phases produced were identified by XRD measurements. The products obtained at 400C were subjected to different doses of gamma-rays (40–160 M rad) and the thermal stabilities of these solids were investigated.The results obtained revealed that basic cobalt carbonate decomposed at 335C to produce Co₃O₄ which remained stable up to 850 and then decomposed above this temperature giving CoO which transformed into Co₃O₄ on cooling to room temperature. Basic copper carbonate dissociated at 290C yielding CuO which yielded Cu₂O and metallic copper at 1060 and 1150C, respectively. However, the produced cuprous oxide and metallic copper solids were converted into CuO and CU₂O, respectively by cooling in air to room temperature.Gamma-irradiation decreased the thermal stability of Co₃O₄ to an extent proportional to the dose employed. On the other hand, this treatment increased the thermal stability of both CuO and Cu₂O.     

Synthesis and constants of 6-nitro-2,3-dihydroquinolin-4(1h)-one

In the literature, there has appeared a communication [1] on the synthesis of 6-nitro-2, 3-dihydroquinolin-4(1H)-one (I) with mp 125–126C (2,4-dinitrophenylhydrazone, mp 269–270C) by the reaction of p-nitroaniline with acrylic acid. Quinolinone I with mp 232–234C (2,4-dinitrophenylhydrazone, mp 327–329C) was obtained by us by decarboxycyclization of N-(2-carboxy-4-nitrophenyl)--alanine in acetic anhydride in the presence of potassium acetate [2].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1390–1392, October, 1979.     

Crystal and molecular structure analysis of flutamide. Bifurcated helicoidal C-H ⋯ O hydrogen bonds

Crystal structure determination and semiempirical AM1 and PM3 calculations were performed on flutamide {2-methyl-N[4 nitro-3-(trifluoromethyl) phenyl] propamide}, a powerful nonsteroidal androgen antagonist. The molecule is almost planar apart from CF₃, NO₂, and CH₃ groups. The NO₂ plane makes an angle of 36.3(4) with the least-square plane of the phenyl ring. The molecules are intermolecularly linked by one N-H O and one C-H O hydrogen bonds. A bifurcated helicoidal hydrogen bond network is formed by the intermolecular C-H O hydrogen bond together with another intramolecular C-H O hydrogen bond. The calculated structures are in good agreement with the crystallographic conformations. AM1 is more accurate for predicting the intramolecular C-H O hydrogen bond while PM3 gives a better geometry for the crowded nitro group. AM1 and PM3 charges of benzenic hydrogens are used to predict the propensity of these atoms to form hydrogen bonds. The noncentrosymmetric space group of the crystal (Pna2₁), the calculated dipole moment (8.88 D), and the calculated angle between molecular dipoles and the twofold axis (–49) close to the optimal value (54.7) indicate that flutamide might be a possible candidate for nonlinear optical material.