Site-selective adsorption of xenon on a stepped Ru(0001) surface

The adsorption of xenon has been studied with UV photoemission (UPS), flash desorption (TDS) and work function measurements on differently conditioned Ru(0001) surfaces at 100 K and at pressures up to 3 × 10^?5 Torr. Low energy electron diffraction (LEED) and Auger electron spectroscopy (AES) served to ascertain the surface perfectness. On a perfect Ru(0001) surface only one Xe adsorption state is observed, which is characterized by$\text{Xe}\text{5}\text{p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$,$\text{1}\text{2}$ electron binding energies of 5.40 and 6.65 eV, an adsorption energy of E_ad≈ 5 kcal/mole and dipole moment of μ'_T ≈ 0.25 D. On a stepped-kinked Ru(0001) surface, the terrace-width, the step-height and step-orientation of which are well characterized with LEED, however, two coexisting xenon adsorption states are distinguishable by an unprecedented separation in$\text{Xe}\text{5}\text{p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$,$\text{1}\text{2}$ electron binding energies of 800 meV, by their different UPS intensities and line shapes, by their difference in adsorption energy ofΔE_ad ≈ 3 kcal/mole and finally by their strongly deviating dipole moments of μ_S = 1.0 D and μ_T = 0.34 D. The two xenon states (which are also observed on a slightly sputtered surface) are identified as corresponding to xenon atoms being adsorbed at step and terrace sites, respectively. Their relative concentrations as deduced from the UPS intensities quantitatively correlate with the abundance of step and terrace sites of the ideal TLK surface structure model as derived from LEED. Furthermore, ledge-sites and kink-sites are distinguishable via E_ad. The E_ad heterogeneity on the stepped-kinked Ru(0001) surface is interpreted in terms of different coordination and/or different charge-transfer-bonding at the various surface sites. The enormous increase in Xe 5p electron binding energy of 0.8 eV for Xe atoms at step sites is interpreted as a pure surface dipole potential shift. —The observed effects suggest selective xenon adsorption as a tool for local surface structure determination.     

The properties of K and coadsorbed CO + K on Ru(001): I. Adsorption,desorption, and structure

An extensive photoemission and LEED study of K and CO+K on Ru(001) has been carried out. In this paper the LEED and some XPS results together with TPD and HREELS data are presented in terms of adsorption, desorption. and structural properties, and their compatibility is discussed. Potassium forms (2 × 2) and $\text{(}\text{3}\text{×}\text{3}\text{)R30°}$ overlayers below and near monolayer coverage, and multilayer bonding and desorption is similar to that of bulk K. The initial sticking coefficients for CO adsorption on K predosed surfaces are correlated with the initial K structure, and s₀ and CO saturation coverages decrease with increasing K coverage. Two well-characterized mixed CO+K layers have been found which are correlated with predosed (2 × 2) K and $\text{(}\text{3}\text{×}\text{3}\text{)R30°}\text{K}$. They have CO to K ratios of 3:2 and 1:1, and lead to LEED patterns with (2 × 2) and (3 × 3) symmetry, respectively. The molecule is believed to be sp² rehybridized under the influence of coadsorbed K, leading to stronger CO-Ru and weaker C-O bonds as indicated by the TPD and HREELS results, and to stand upright in essentially twofold bridges.     

A leed and AES study of the adsorption of chlorine on W(100) at room temperature

The surface structures formed on room temperature adsorption of chlorine on W(100) and subsequent annealing of the saturated surface have been characterised by LEED. The progress of gas adsorption was followed by AES which was also used to observe relative chlorine coverage on annealing. Room temperature adsorption was random up to the saturation exposure of 1.7 L. On annealing the chlorine adlayer ordering commenced at about 800 K. One-dimensional ordering into rows along the <1, 1> directions was followed by the ordering of these into two 2D structures: an interpenetrating $\text{7}\text{1}\text{1}\text{1}$ at 830 K and an interpenetrating $\text{5}\text{1}\text{6}\text{1}$ for 860 K and above. Desorption started after 1050 K annealing and was complete by 1440 K. Saturation chlorine coverage is inferred as 5 × 10¹⁴ atoms cm^?2 and the single desorption peak coupled with the LEED analysis suggests that chlorine is bridge bonded to the W(100) surface for the ordered overlayer.     

The adsorption of CO,O2, and H2 on Pt(100)-(5×20)

The adsorption/desorption characteristics of CO, O₂, and H₂ on the Pt(100)-(5 × 20) surface were examined using flash desorption spectroscopy. Subsequent to adsorption at 300 K, CO desorbed from the (5×20) surface in three peaks with binding energies of 28, 31.6 and 33 kcal gmol^?1. These states formed differently from those following adsorption on the Pt(100)-(1 × 1) surface, suggesting structural effects on adsorption. Oxygen could be readily adsorbed on the (5×20) surface at temperatures above 500 K and high O₂ fluxes up to coverages of $\text{2}\text{3}$ of a monolayer with a net sticking probability to ssaturation of ? 10^?3. Oxygen adsorption reconstructed the (5 × 20) surface, and several ordered LEED patterns were observed. Upon heating, oxygen desorbed from the surface in two peaks at 676 and 709 K; the lower temperature peak exhibited atrractive lateral interactions evidenced by autocatalytic desorption kinetics. Hydrogen was also found to reconstruct the (5 × 20) surface to the (1 × 1) structure, provided adsorption was performed at 200 K. For all three species, CO, O₂, and H₂, the surface returned to the (5 × 20) structure only after the adsorbates were completely desorbed from the surface.     

Interaction of CO,CO2 and O2 with nonpolar,stepped and polar Zn surfaces of ZnO

The nonpolar (10$\text{1}$0), stepped (40$\text{4}$1) and (50$\text{5}$1), and the polar (0001) surfaces of ZnO were prepared. Stable unreconstructed nonpolar and stepped surfaces were obtained. LEED analyses showed that the step height and the step width of the stepped surfaces were similar to the theoretical values. The polar surface showed a 1 × 1 LEED pattern of six-fold symmetry after annealing at 500°C, and evidence of a more complicated pattern at 300–400°C. Temperature programmed desorption of CO resulted in the desorption of CO from the stepped and the polar surfaces. However, desorption of CO₂ was observed from the stoichiometric nonpolar surface, and no desorption from the reduced nonpolar surface. CO₂ was also observed by interacting CO with all surfaces at elevated temperatures. A total of four temperature programmed desorption peaks of CO₂, α, β, γ, and δ were observed. The α and β peaks were observed on the nonpolar and the stepped surfaces, and the γ peak was observed on the polar surface. The α peak was assigned to adsorption on a surface ZnO pair, and the β peak was assigned to adsorption on an anion vacancy or a step. While adsorbed water enhanced the β, preadsorbed methanol reduced it. O₂ adsorption was similar on the nonpolar and the stepped surfaces, but was weak on the polar surface.     

The chemisorption of carbon monoxide on a Co(0001) single crystal surface; studied by LEED,UPS, EELS,AES and work function measurements

The chemisorption of CO on Co(0001) has been investigated by LEED, UPS, EELS, Auger and sp measurements. CO is molecularly adsorbed on Co(0001) in the investigated temperature range from 100 to 450 K. This is deduced from the UPS and EELS results and the reversibility of the sp and LEED data. The isosteric heat of adsorption has a constant value of 128 kJ/mol up to a coverage of $\text{1}\text{3}$ and drops then to about 96 kJ/mol. This coincides with the completion of a (√3 × √3)R30° overlayer structure and the formation of a (2√3 × 2√3)R30° CO overlayer which is fully developed at 100 K.     

Adsorption,coadsorption, and reactivity of sodium and nitric oxide on Ag(111)

The adsorption, desorption, and surface structural properties of Na and NO on Ag(111), together with their coadsorption and surface reactivity, have been studied by LEED, Auger spectroscopy, and thermal desorption. On the clean surface, non-dissociative adsorption of NO into the a-state occurs at 300 K with an initial sticking probability of ~0.1, saturation occurring at a coverage of $\text{~}\text{1}\text{20}$. Desorption occurs reversibly without decomposition and is characterised by a desorption energy of E_d ~ 103 kJ mol^?1. In the coverage regime 0 < θ_Na < 1, sodium adsorbs in registry with the Ag surface mesh and the desorption spectra show a single peak corresponding to E_d ~ 228 kJ mol^?1. For multilayer coverages (1 < θ _Na < 5) a new low temperature peak appears in the desorption spectra with E_d ~ 187 kJ mol^?1. This is identified with Na desorption from an essentially Na surface, and the desorption energy indicates that Na atoms beyond the first chemisorbed layer are significantly influenced by the presence of the Ag substrate. The LEED results show that Na multilayers grow as a (√7 × √7) R19.2° overlayer, and are interpreted in a way which is consistent with the above conclusion. Coadsorption of Na and NO leads to the appearance of a more strongly bound and reactive chemisorbed state of NO (β-NO) with E_d ~ 121 kJ mol^?1. β-NO appears to undego surface dissociation to yield adsorbed O and N atoms whose subsequent reactions lead to the formation of N₂, N₂O, and O₂ as gaseous products. The reactive behaviour of the system is complicated by the effects of Na and O diffusion into the bulk of the specimen, but certain invariant features permit us to postulate an overall reaction mechanism, and the results obtained here are compared with other relevant work.     

Interaction of NO and O2 with Pd(111) surfaces. II

At least three different types of oxygen atoms may be present in the surface region of Pd(111) which may be distinguished by their thermal, chemical, structural and electronic properties. Exposure to O₂ at low temperatures causes the formation of 2 × 2 and $\text{3}\text{×}\text{3}\text{R30°}$ structures from chemisorbed oxygen, the latter being probably stabilized by small amounts of H_ab or CO_ab on the surface. The initial sticking coefficient was estimated to be about s₀ ≈ 0.3, the adsorption energy ~55 kcal/mole. The photoelectron spectrum exhibits an additional maximum at 5 eV below E_F. During thermal desorption dissolution of oxygen in the bulk strongly competes; on the other hand absorbed oxygen may diffuse to the surface giving rise to high temperature peaks in the flash desorption spectra. High temperature (~1000 K) treatment of the sample with O₂ causes the formation of a more tightly bound surface species also characterized by a 2 × 2 LEED pattern which is chemically rather stable and which is considered to be a transition state to PdO. The latter compound is only formed by interaction with NO at about 1000 K via the reaction $\text{Pd}\text{+}\text{NO}\text{→}\text{PdO}\text{+}\text{1}\text{2N}{}_2$ which offers a rather high “virtual” oxygen pressure. This reaction leads to drastic changes of the photoelectron spectrum and is also identified within the LEED pattern.     

Interaction of inert gases with a nickel (100) surface: I. Adsorption of xenon

The adsorption of Xe on a Ni(100) surface has been studied in UHV between 30 and 100 K using LEED, thermal desorption spectroscopy (TDS), work function (Δφ) measurements, and UV photoemission (UPS). At and below 80 K, Xe adsorbs readily with high initial sticking probability and via precursor state adsorption kinetics to form a partially ordered phase. This phase has a binding energy of ~5.2 kcal/mole as determined by isosteric heat measurements. The heat of adsorption is fairly constant up to medium coverages and then drops continuously as the coverage increases, indicating repulsive mutual interactions. The thermal desorption is first order with a preexponential factor of about 10¹² s^?1, indicative of completely mobile adsorption. Adsorbed Xe lowers the work function of the Ni surface by 376 mV at monolayer coverage. (This coverage is determined from LEED to be 5.65 × 10¹⁴ Xe molecules/cm^-2.) For not too high coverages, θ, Δφ(θ) can be described by the Topping model, with the initial dipole moment μ₀ = 0.29 D and the polarizability α being 3.5 × 10^?24 cm³. In photoemission, the $\text{Xe 5p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$ and $\text{5p}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ orbitals show up as intense peaks at 5.56 and 6.83 eV below E_f which do not shift their position as the coverage varies. Multilayer adsorption (i.e. the filling of the second and third layers) can be seen by TDS. The binding energies of these α states can be estimated to range between 4.5 and 3.5 kcal/mole. The results are compared and contrasted with previous findings of Xe adsorption on other transition metal surfaces and are discussed with respect to the nature of the inert-gas-metal adsorptive bond.     

Displacive surface phases formed by hydrogen chemisorption on W {001}

A detailed LEED study is reported of the surface phases stabilised by hydrogen chemisorption on W {001}, over the temperature range 170 to 400 K, correlated with absolute determinations of surface coverages and sticking probabilities. The saturation coverage at 300 K is 19(± 3) × 10¹⁴ atoms cm^?2, corresponding to a surface stoichiometry of WH₂, and the initial sticking probability for both H₂ and D₂ is 0.60 ± 0.03, independent of substrate temperature down to 170 K. Over the range 170 to 300 K six coverage-dependent temperature-independent phases are identified, and the transition coverages determined. As with the clean surface $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$ displacive phase, the c(2 × 2)-H phase is inhibited by the presence of steps and impurities over large distances (～20 Å), again strongly indicative of CDW-PLD mechanisms for the formation of the H-stabilised phases. These phases are significantly more temperature stable than the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$, the most stable being a c(2 × 2)-H split half-order phase which is formed at domain stoichiometries between WH_0.3 and WH_0.5. LEED symmetry analysis, the dependence of half-order intensity and half-width on coverage, and I-V spectra indicate that the c(2 × 2)-H phase is a different displacive structure from that determined by Debe and King for the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$. LEED I-V spectra are consistent with an expansion of the surface-bulk interlayer spacing from 1.48 to 1.51 Å as the hydrogen coverage increases to ～4 × 10¹⁴ atoms cm^?2. The transition from the split half-order to a streaked half-order phase is found to be correlated with changes in a range of other physical properties previously reported for this system. As the surface stoichiometry increases from WH to WH₂ a gradual transition occurs between a phase devoid of long-range order to well-ordered (1 × 1)-H. Displacive structures are proposed for the various phases formed, based on the hypothesis that at any coverage the most stable phase is determined by the gain in stability produced by a combination of chemical bonding to form a local surface complex and electron-phonon coupling to produce a periodic lattice distortion. The sequence of commensurate, incommensurate and disordered structures are consistent with the wealth of data now available for this system. Finally, a simple structural model is suggested for the peak-splitting observed in desorption spectra.     

The growth and alloy formation of copper on the platinum (111) and stepped (553) crystal surfaces; characterization by Leed,AES, and CO thermal desorption

Epitaxial layers of copper were formed on Pt(111) and Pt(553) single crystal surfaces by condensation of copper atoms from the vapor. Surface alloys were formed by diffusing the copper atoms into the platinum substrate at temperatures above 550 K. The activation energy for this process was found to be ~ 120 $\text{kJ}\text{mol}$. These Pt/Cu surfaces were characterized by LEED, AES, and TDS of CO. The copper grows in islands on the Pt(111) surface and one monolayer is completed before another begins. There is an apparent repulsive interaction between the copper atoms and the step sites of the Pt(553) surface which causes a second layer of copper to begin forming before the first layer is complete. Epitaxial copper atoms block CO adsorption sites on the platinum surface without affecting the CO desorption energy. When the copper is alloyed with the platinum however, the energy of desorption of CO from the platinum was reduced by as much as 20 $\text{kJ}\text{mol}$. This reduction in the desorption energy suggests an electronic modification that weakens the Pt-CO bond.     

Étude de l'adsorption de l'oxygène sur ruban de rhénium par mesure des variations du travail d'extraction électronique

Adsorption and work function changes have been followed on a recrystallized rhenium ribbon [preferentially oriented with (0001) plane parallel to the surface] in an ultrahigh vacuum apparatus. Gas pressure was monitored by mass spectrometry and work function variations measured with the diode method in the retarding potential range, using an electron gun. Despite changes in saturation coverages, work function differences at saturation, and sticking coefficient with the adsorption temperature of the sample, curves giving the surface potential with coverage are characterized by a common part till a critical coverage ($\text{5 × 10}{}^{14}\text{atoms}\text{cm}{}^2$), in the 300–850 K range. Comparison with LEED, thermal desorption and electron induced desorption results of the literature is in agreement with an adsorption induced surface rearrangement, above this critical coverage.     

Chemisorption and surface reactivity of nitric oxide on clean and sodium-dosed Ag(110)

The chemisorption of NO on clean and Na-dosed Ag(110) has been studied by LEED, Auger spectroscopy, and thermal desorption. On the clean surface, non-dissociative adsorption into the α-state occurs at 300 K with an initial sticking probability of ～0.1, and the surface is saturated at a coverage of about $\text{1}\text{25}$. Desorption occurs without decomposition, and is characterised by an enthalpy of E_d ～104 kJ mol^?1 — comparable with that for NO desorption from transition metals. Surface defects do not seem to play a significant role in the chemistry of NO on clean Ag, and the presence of surface Na inhibits the adsorption of αNO. However, in the presence of both surface and subsurface Na, both the strength and the extent of NO adsorption are markedly increased and a new state (β₁NO) with E_d ～121 kJ mol^?1 appears. Adsorption into this state occurs with destruction of the Ag(110)-(1 × 2)Na ordered phase. Desorption of β₁NO occurs with significant decomposition, N₂ and N₂O are observed as geseous products, and the system's behaviour towards NO resembles that of a transition metal. Incorporation of subsurface oxygen in addition to subsurface Na increases the desorption enthalpy (β₂NO), maximum coverage, and surface reactivity of NO still further: only about half the adsorbed layer desorbs without decomposition. The bonding of NO to Ag is discussed, and comparisons are made with the properties of α and βNO on Pt(110).     

Adsorption of oxygen on a Cu{110} surface with and without the influence of A keV Ne+ beam: Stage I: Coverages up to half a monolayer

Low Energy Ion Scattering has been used to study the interaction of molecular oxygen with a Cu{110} surface. The amount of adsorbed atomic oxygen was monitored by the 4 keV Ne⁺¦O reflection signal. In the first adsorption stage (coverage less than half a monolayer) the sticking probability varied proportional to the number of empty adsorption sites: S = S₀ (1 ? $\text{}\text{?}$gq). It turned out not to be influenced by the Ne⁺ bombardment. The initial sticking probability S₀ was found to be ≈ 0.24. In this first adsorption stage the oxygen-covered surface is reconstructed according to the “missing row” model, leading to a (2 × 1) LEED pattern.     

Adsorption of sulfur dioxide and the interaction of coadsorbed oxygen and sulfur on Pt(111)

The adsorption of sulfur dioxide and the interaction of adsorbed oxygen and sulfur on Pt(111) have been studied using flash desorption mass spectrometry and LEED. The reactivity of adsorbed sulfur towards oxygen depends strongly on the sulfur surface concentration. At a sulfur concentration of 5 × 10¹⁴ S atoms cm^?2 ($\text{(}\text{3}\text{×}\text{3}\text{)R30°}$ structure) oxygen exposures of 5 × 10^?5 Torr s do not result in the adsorption of oxygen nor in the formation of SO₂. At concentrations lower than 3.8 × 10¹⁴ S stoms cm^?2 ((2 × 2) structure) the thermal desorption following oxygen dosing at 320 K yields SO₂ and O₂. With decreasing sulfur concentration the amount of desorbing O₂ increases and that of SO₂ passes a maximum. This indicates that sulfur free surface regions, i.e. holes or defects in the (2 × 2) S structure, are required for the adsorption of oxygen and for the reaction of adsorbed sulfur with oxygen. SO₂ is adsorbed with high sticking probability and can be desorbed nearly completely as SO₂ with desorption maxima occurring at 400, 480 and 580 K. The adsorbed SO₂ is highly sensitive to hydrogen. Small H₂ doses remove most of the oxygen and leave adsorbed sulfur on the surface. After adsorption of SO₂ on an oxygen predosed surface small amounts of SO₃ were desorbed in addition to SO₂ and O₂ during heating. Preadsorbed oxygen produces variations of the SO₂ peak intensities which indicate stabilization of an adsorbed species by coadsorbed oxygen.     

The adsorption of benzene and naphthalene on the Rh(111) surface: A LEED,AES and TDS study

The adsorption of benzene and naphthalene on the Rh(111) single-crystal surface has been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS). Both benzene and naphthalene form two different ordered surface structures separated by temperature-induced phase transitions: benzene transforms from a ($\text{3}\text{1}\text{1}\text{3}$) structure, which can also be labelled c($\text{2}\text{3}\text{× 4}$)rect, to a (3 × 3) structure in the range of 363–395 K, while naphthalene transforms from a ($\text{3}\text{3}\text{× 3}\text{3}$)R30° structure to a (3 × 3) structure in the range 398–423 K. Increasing the temperature further, these structures are found to disorder at about 393 K for benzene and about 448 K for naphthalene. Then, a first H₂ desorption peak appears at about 413 K for benzene and 578 K for naphthalene and is interpreted as due to the occurrence of molecular dissociation. All these phase transitions are irreversible. The ordered structures are interpreted as due to flat-lying or nearly flat-lying intact molecules on the rhodium surface, and they are compared with similar structures found on other metal surfaces. Structural models and phase transition mechanisms are proposed.     

Characterization of oxygen,carbon, and sulfur adlayers on W(211)

Adlayers of oxygen, carbon, and sulfur on W(211) have been characterized by LEED, AES, TPD, and CO adsorption. Oxygen initially adsorbs on the W(211) surface forming p(2 × 1)O and p(1 × 1)O structures. Atomic oxygen is the only desorption product from these surfaces. This initial adsorption selectively inhibits CO dissociation in the CO(β₁) state. Increased oxidation leads to a p(1 × 1)O structure which totally inhibits CO dissociation. Volatile metal oxides desorb from the p(1 × 1)O surface at 1850 K. Oxidation of W(211) at 1200 K leads to reconstruction of the surface and formation of p(1 × n)O LEED patterns, 3 ? n ? 7. The reconstructed surface also inhibits CO dissociation and volatile metal oxides are observed to desorb at 1700 K, as well as at 1850 K. Carburization of the W(211) surface below 1000 K produced no ordered structures. Above 1000 K carburization produces a c(6 × 4)C which is suggested to result from a hexagonal tungsten carbide overlayer. CO dissociation is inhibited on the W(211)?c(6×4)C surface. Sulfur initially orders into a c(2 × 2)S structure on W(211). Increased coverage leads to a c(2×6)S structure and then a complex structure. Adsorbed sulfur reduces CO dissociation on W(211), but even at the highest sulfur coverages CO dissociation was observed. Sulfur was found to desorb as atomic S at 1850 K for sulfur coverages less than $\text{7}\text{6}$ monolayers. At higher sulfur coverages the dimer, S₂, was observed to desorb at 1700 K in addition to atomic sulfur desorption.     

Thermodynamics of xenon adsorption on Pd(s)[8(100) × (110)]: From steps to multilayers

The thermodynamic properties of the adsorption of xenon on the stepped Pd(s)[8(100)×(110)] surface have been studied over a wide range of pressure (5×10^?11 to 1×10^?4 Torr) and temperature (40–140 K). We have measured adsorption isobars using AES in order to evaluate the surface coverage. By choosing pressure and temperature we have studied under equilibrium conditions, the successive adsorption of xenon on the steps and on the terraces until the first layer is formed, the condensation of the second layer as well as the formation of xenon multilayers. For a small range of pressure and temperature, adsorption takes place only on the atomic steps. The LEED pattern shows that only every other site along the steps is occupied. The extrapolated initial heat of adsorption for steps is E_ad^S = 10.2 kcal/mol, decreasing monotonically by about 2 kcal/mol as the relative coverage of the step sites increases. The dipole moment of the Xe atoms adsorbed on steps is 1.12 D. During adsorption on the terraces the LEED observations suggest that the xenon adlayer is non-localized up to completion of the hexagonally close packed monolayer. The initial heat of adsorption on the terraces, E_ad^T is 8.2 kcal/mol and decreases continuously to a value of 6.9 kcal/mol for a complete monolayer due to lateral repulsive interactions between the adsorbed xenon atoms. The induced dipole moment of Xe on terraces is reduced to 0.49 D. The 5p_{$\text{1}\text{2}$} binding energy of Xe adsorbed on terrace sites is 0.3 eV smaller than that of Xe occuping step sites. The differential molar entropy of the adsorbed layer on the terraces as a function of coverage compares fairly well with the calculated value for an ideally mobile two-dimensional gas. No indication of the growth of two-dimensional xenon islands has been found under these conditions. The isosteric heat of adsorption for the second layer is E_ad^sec = 5.8 kcal/mol independently of the coverage. The condensation of the second layer is a first order two-dimensional gas ? two-dimensional solid phase transition in opposition to the continuous nature of the adsorption of the first layer (extending over a wide range of temperature for a given pressure). The induced dipole moment is further reduced for the Xe second layer to a value of 0.11 D. Finally, the condensation of multilayers proceeds with a latent heat of transformation of E_cond = 3.8 kcal/mol in excellent agreement with the known bulk value for the heat of sublimation of xenon. The line shape of the NVV low energy Auger transitions of xenon or the UPS binding energies of the Xe 5p_{$\text{3}\text{2}$,$\text{1}\text{2}$} spectra allow a clear distinction between first, second and higher layer Xe atoms. We have also established the temperature/pressure conditions for equilibrium between first, second and bulk xenon layers, i.e. a so-called “roughening point”.     

Chemical shifts in auger electron spectra from silicon in silicon nitride

The chemisorption of nitric oxide on (110) nickel has been investigated by Auger electron spectroscopy, LEED and thermal desorption. The NO adsorbed irreversibly at 300 K and a faint (2 × 3) structure was observed. At 500 K this pattern intensified, the nitrogen Auger signal increased and the oxygen signal decreased. This is interpreted as the dissociation of NO which had been bound via nitrogen to the surface. By measuring the rate of the decomposition as a function of temperature the dissociation energy is calculated at 125 kJ mol^?1. At ～860 K nitrogen desorbs. The rate of this desorption has been measured by AES and by quantitative thermal desorption. It is shown that the desorption of N₂ is first order and that the binding energy is 213 kJ mol^?1. The small increase in desorption temperature with increasing coverage is interpreted as due to an attractive interaction between adsorbed molecules of ～14 kJ mol^?1 for a monolayer. The (2 × 3) LEED pattern which persists from 500–800 K is shown to be associated with nitrogen only. The same pattern is obtained on a carbon contaminated crystal from which oxygen has desorbed as CO and CO₂. The (2 × 3) pattern has spots split along the (0.1) direction as $\text{(m,}\text{n}\text{3}\text{)}$ and $\text{(}\text{m}\text{2, n}\text{)}$. This is interpreted as domains of (2 × 3) structures separated by boundaries which give phase differences of $\text{2π}\text{3}$ and π. The split spots coalesce as the nitrogen starts to desorb. A (2 × 1) pattern due to adsorbed oxygen was then observed to 1100 K when the oxygen dissolved in the crystal leaving the nickel (110) pattern.     

Oxygen chemisorption and the carbon monoxide-oxygen interaction on Ru(101)

The adsorption of oxygen and the interaction of carbon monoxide with oxygen on Ru(101) have been studied by LEED, Auger spectroscopy and thermal desorption. Oxygen chemisorbs at 300 K via a precursor state and with an initial sticking probability of ~0.004, the enthalpy of adsorption being ~300 kJ mol^?1. As coverage increases a well ordered ¦11,30¦ phase is formed which at higher coverages undergoes compression along [010] to form a ¦21,50¦ structure, and the surface eventually saturates at 0 ~ $\text{8}\text{9}$. Incorporation of oxygen into the subsurface region of the crystal leads to drastic changes in the surface chemistry of CO. A new high; temperature peak (γ CO, E_d ~ 800 kJ mol^?1) appears in the desorption spectra, in addition to the α and β CO peaks which are characteristic of the clean surface. Coadsorption experiments using ¹⁸O₂ indicate that γ CO is not dissociatively adsorbed, and this species is also shown to be in competition with β CO for a common adsorption site. The unusual temperature dependence of the LEED intensities of the ¦11,30¦-O phase and the nature of α, β, and β CO are discussed. Oxygen does not displace adsorbed CO at 300 K and the converse is also true, neither do any Eley-Rideal or Langmuir-Hinshelwood reactions occur under these conditions. Such processes do occur at higher temperatures, and in particular the reaction CO(g) + O(a) → CO₂(g) appears to occur with much greater collisional efficiency than on Ru(001). The oxidation of CO has been examined under steady state conditions, and the reaction was found to proceed with an apparent activation energy of 39 kJ mol^?. This result rules out the commonly accepted explanation that CO desorption is rate determining, and is compared with the findings of other authors.