Emerging materials for plasmon-assisted photoelectrochemical water splitting

Energy production and environmental pollution are the two major problems the world is facing today. The depletion of fossil fuels and the emission of harmful gases into the atmosphere leads to the research on clean and renewable energy sources. In this context, hydrogen is considered an ideal fuel to meet global energy needs. Presently, hydrogen is produced from fossil fuels. However, the most desirable way is from clean and renewable energy sources, like water and sunlight. Sunlight is an abundant energy source for energy harvesting and utilization. Recent studies reveal that photoelectrochemical (PEC) water splitting has promise for solar to hydrogen (STH) conversion over the widely tested photocatalytic approach since hydrogen and oxygen gases can be quantified easily in PEC. For designing light-absorbing materials, semiconductors are the primary choice that undergoes excitation upon solar light irradiation to produce excitons (electron-hole pairs) to drive the electrolysis. Visible light active semiconductors are attractive to achieve high solar to chemical fuel conversion. However, pure semiconductor materials are far from practical applications because of charge carrier recombination, poor light-harvesting, and electrode degradation. Various heteronanostructures by the integration of metal plasmons overcome these issues. The incorporation of metal plasmons gained significance for improving the PEC water splitting performance. This review summarizes the possible main mechanisms such as plasmon-induced resonance energy transfer (PIRET), hot electron injection (HEI), and light scatting/trapping. It also deliberates the rational design of plasmonic structures for PEC water splitting. Furthermore, this review highlights the advantages of plasmonic metal-supported photoelectrodes for PEC water splitting.     

Perovskite Oxide Based Electrodes for High‐Performance Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy for the large‐scale production of renewable hydrogen from water. Developing cost‐effective, active and stable semiconducting photoelectrodes is extremely important for achieving PEC water splitting with high solar‐to‐hydrogen efficiency. Perovskite oxides as a large family of semiconducting metal oxides are extensively investigated as electrodes in PEC water splitting owing to their abundance, high (photo)electrochemical stability, compositional and structural flexibility allowing the achievement of high electrocatalytic activity, superior sunlight absorption capability and precise control and tuning of band gaps and band edges. In this review, the research progress in the design, development, and application of perovskite oxides in PEC water splitting is summarized, with a special emphasis placed on understanding the relationship between the composition/structure and (photo)electrochemical activity.     

太阳能分解水制氢最近进展:光催化、光电催化及光伏-光电耦合途径

能源是人类生存和发展的物质基础,太阳能作为最丰富的清洁可再生能源之一,其开发利用受到了世界范围内的广泛关注.通过光催化分解水制氢将太阳能以化学能的形式储存起来不仅能利用太阳能制取高燃烧值的氢能,同时氢能可与CO2综合利用结合起来,在减少碳排放的同时,生成高附加值的化学品,实现碳氢资源的优化利用.光催化分解水制氢在过去的几年里取得了长足的进步,本综述从三种研究广泛的太阳能光催化分解水制氢途径(即光催化、光电催化以及光伏-光电耦合途径)入手,分别简要介绍了太阳能分解水制氢在近几年取得的最新研究进展.利用纳米粒子悬浮体系进行光催化分解水制氢成本低廉、易于规模化放大,被认为是未来应用最可行的方式之一,但是太阳能转化利用效率还偏低.最新报道的SrTiO3:La,Rh/Au/BiVO4:Mo光催化剂其太阳能到氢能(STH)转化效率已超过了1.0%,相比之前报道的大多数光催化剂体系有了数量级的飞跃,让人们对太阳能光催化分解水制氢未来的规模化应用看到了希望.高效宽光谱响应的光催化剂、高效电荷分离策略、新型高效助催化剂以及气体分离新方法和新材料等,均是粉末光催化剂体系研究最为关键的问题;光电催化分解水在过去2–3年内发展迅速,在一些典型的光阳极半导体材料(如BiVO4和Ta3N5等)体系上太阳能利用效率超过2.0%以上.最新研究发现,在Ta3N5光阳极的研究中,通过在光电极表面合理设计和构筑空穴传输层和电子阻挡层等策略,光电流和电极稳定性均可得到大幅度提升,光电流大小甚至可接近Ta3N5材料的理论极限电流.如果能进一步在过电位和电极稳定性上取得突破,该体系的STH转化效率还会得到大幅度改进.此外,光阴极的研究也越来越受到了研究者的关注;光伏-光电耦合体系在三种途径里面太阳能制氢效率最高,在多个体系上已超过10%以上,最近报道的利用多结GaInP/GaAs/Ge电池与Ni电催化剂耦合,其太阳能制氢效率可达到22.4%.虽然该种制氢途径的效率已超过其工业化应用的要求,但是光伏电池的成本(尤其是多结GaAs太阳电池)极大限制了其大面积规模化应用,同时还要考虑电催化剂的成本和效率等,光伏-光电耦合制氢是成本最高的太阳能制氢途径.需要指出的是,光伏-光电耦合制氢有望在一些特殊的领域最先取得实际应用,如为外太空航天器、远洋航海以及孤立海岛等传统能源无法满足的地方提供能源供给.总之,太阳能分解水制氢研究取得了一系列重要进展,太阳能制氢效率得到了大幅度提升,也是目前世界范围内关注的研究热点之一,不仅具有强的潜在工业应用背景,更为基础科学提供了诸多新的研究课题.这一极具挑战的研究领域,在先进技术快速发展和基础科学问题认识不断提高的基础上,不久的将来,有望在不久的将来在基础科学和应用研究方面取得重大突破.     

Flame spray pyrolysis for the one-step fabrication of transition metal oxide films: Recent progress in electrochemical and photoelectrochemical water splitting

Developing large scale deposition techniques to fabricate thin porous films with suitable opto-electro nic properties for water catalysis is a necessity to mitigate climate change and have a sustainable environment.In this review,flame spray pyrolysis(FSP)technique,a rapid and scalable methodology to synthesize nanostructured transitional metal oxide films with designed functionalities,is firstly introduced.Furthermore,applications in electrochemical(EC)and photoelectrochemical(PEC)water splitting for the production of hydrogen fuel is also presented.The high combustion temperature and the aggregation of flame aerosol ensure that the FSP-made films possess high crystallinity,tunable porosity and high surface areas,making this method suitable either as catalysts for EC water splitting or as efficient semiconductor materials for PEC water splitting.Finally,a perspective on the next generation FSP engineered films with potential applications in energy storage and conversion is described.     

Near infrared-driven photoelectrochemical water splitting: Review and future prospects

Photoelectrochemical (PEC) water splitting supplies an environmentally friendly, sustainable approach to generating renewable hydrogen fuels. Oxides semiconductors, e.g. TiO₂, BiVO₄, and Fe₂O₃, have been widely developed as photoelectrodes to demonstrate the utility in PEC systems. Even though significant effort has been made to increase the PEC efficiency, these materials are still far from practical applications. The main issue of metal oxides is the wide bandgap energy that hinders effective photons harvesting from sunlight. In solar spectrum, over 40% of the energy is located in the near-infrared (NIR) region. Developing sophisticated PEC systems that can be driven by NIR illumination is therefore essential. This review gives a concise overview on PEC systems based on the use of NIR-driven photoelectrodes. Promising candidates as efficient yet practical NIR-responsive photoelectrodes are suggested and discussed. Future outlooks on the advancement of PEC water splitting are also proposed.     

提高氧化铁光电催化分解水效率的策略进展

为了解决能源危机与环境污染问题,发展一种可再生的清洁能源至关重要.太阳能是一种取之不尽用之不竭的清洁能源,而氢气是一种良好的能源载体.利用太阳能光电催化水分解制氢,是一项有望能够解决能源与环境问题的技术,具有很大的应用前景.其中,氧化铁因为具有合适的能带位置与带隙、良好的稳定性与廉价无毒等优点,成为一种理想的光阳极材料.但是,在实际的测试中,氧化铁仅仅只能得到一个较低的光电转换效率,这可能是因为其较短的空穴扩散距离、较低的电导率以及极度缓慢的水氧化反应动力学所致.整个光电催化水氧化可分为三个过程,即光吸收过程、电荷分离过程以及表面空穴注入过程.这三个过程的效率共同决定了器件的太阳能转化效率.鉴于此,本文将从如何提高这三个效率的角度出发,总结近期研究报道中提高氧化铁光电催化分解水效率的一些策略.光吸收过程是指半导体中价带的电子在吸收具有一定能量的光子后发生跃迁,产生空穴-电子对的过程.其光子的损失主要来源于光的反射、透射以及半导体吸收边的限制.提高光吸收效率的主要策略包括制备具有特定纳米结构的氧化铁电极、利用表面等离子体共振效应以及组成双光吸收系统和掺杂等.电荷分离过程指的是受光激发产生的空穴电子对,在内建电场的作用下发生电荷分离,即光生空穴流向电极表面,光生电子流向半导体内部并从外电路导出.电荷分离效率的损失主要来源于光生载流子在迁移过程中的复合.因此,为了提高电荷分离效率,常见的策略是提高载流子在电荷分离过程中的复合时间τ₁和减少电荷迁移到表面(空穴)或者基底(电子)的时间τ₂.具体的策略包括制备特定的纳米结构(缩短体表相距离,减少τ₂)、构建异质结(增强能带弯曲,提高τ₁和减少τ₂)、掺杂(减少τ₂)和钝化复合中心(提高τ₁)等.表面空穴注入是指到达表面的光生空穴发生水氧化反应生成氧气的过程.除了空穴注入外,表面还可能存在复合与逆反应过程.因此,为了提高表面空穴注入效率,我们既可以提高水氧化反应动力学,具体的手段包括引入水氧化催化剂、F掺杂和碱处理等;也可以采用减少复合反应的策略,具体的方法包括引入钝化层、酸处理和高温热处理等;还可以采用减少逆反应的方法,最常见的手段就是在基底与氧化铁层之间引入电子阻挡层.上述三种途径都能提高表面空穴注入效率.最后,通过结合上述的一些策略,目前得到的最高性能的氧化铁电极在1.23 V(相对于可逆氢电极)能够达到6 mA cm^?2的光电催化分解水电流,但这个值依然明显低于氧化铁的理论值(12.6 mA cm^?2).这可能是由于体相复合所致.除此之外,氧化铁表面的水氧化机理现在依然不清晰,这些都是需要我们在未来解决的问题.     

硫氧键合BiVO4光阳极与FeNi催化剂实现高效水氧化

光电催化分解水可以将充足的太阳能直接转化存储为绿色清洁的氢能,然而光阳极表面缓慢的析氧反应动力学严重限制了太阳能到氢能的转化效率。我们通过一种简单的S-O键合策略实现BiVO4光阳极与FeNi催化剂的界面耦合（S:BiVO4-FeNi）,其光电催化分解水的光电流达到6.43 mA/cm2（1.23 VRHE, AM 1.5G）。进一步研究结果表明：界面S-O键合能够有效实现BiVO4光阳极光生电荷分离并促进空穴向FeNi催化剂表面迁移。同时,S-O键合可以进一步调控FeNi催化剂表面的电荷分布,从而有效提高光电化学分解水析氧活性和稳定性。该工作为设计构建具有高效、稳定的太阳能光电催化分解水体系提供了一种新的研究策略。     

光电催化用于高附加值化学品合成

化石燃料的过度消耗导致了能源短缺和环境破坏,因此可再生清洁能源的开发已成为当务之急.在众多可再生能源中,太阳能因其环境友好,储量巨大且分布广泛等特点而引起了研究者们的兴趣.光电催化(PEC)是一种能够将可再生太阳能转化为化学能的方法,而最受关注的是通过PEC水分解来获得高附加值的氢能源.欲使PEC系统实现水分解,理论上...     

Visible‐Light‐Responsive Photoanodes for Highly Active,Stable Water Oxidation

Solar energy is a natural and effectively permanent resource and so the conversion of solar radiation into chemical or electrical energy is an attractive, although challenging, prospect. Photo‐electrochemical (PEC) water splitting is a key aspect of producing hydrogen from solar power. However, practical water oxidation over photoanodes (in combination with water reduction at a photocathode) in PEC cells is currently difficult to achieve because of the large overpotentials in the reaction kinetics and the inefficient photoactivity of the semiconductors. The development of semiconductors that allow high solar‐to‐hydrogen conversion efficiencies and the utilization of these materials in photoanodes will be a necessary aspect of achieving efficient, stable water oxidation. This Review discusses advances in water oxidation activity over photoanodes of n‐type visible‐light‐responsive (oxy)nitrides and oxides.     

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄/VO_x photoanode exhibits a photocurrent density of 6.29 mA cm⁻² at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.     

TiO_2纳米阵列光阳极光电催化水分解研究进展

光电催化水分解制氢是目前解决能源危机与环境污染最理想的技术之一.设计和构筑高效的光阳极是实现光电催化技术实际应用的关键.在众多半导体光阳极材料中,TiO_2纳米阵列由于其快的电荷传输速率,高的光热稳定性,无毒和成本低等优点,已经被广泛用于光电催化水分解反应的研究.但是TiO_2本征的光吸收范围窄、光生电荷复合率高、表面水氧化动力学缓慢严重地制约了其太阳能-氢能转换效率.我们结合近年来国内外及本课题组的研究工作详细论述了TiO_2纳米阵列的改性策略,主要包括利用元素掺杂来拓展TiO_2的光吸收范围并提高导电性,构筑异质结促进光电极电荷的分离与转移,半导体敏化增加光电极的可见光吸收并促进电荷转移,表面处理用于增加表面水氧化反应速率.最后指出了该材料发展现状,并对其发展前景做出展望.我们为进一步提高TiO_2纳米阵列的光电催化水分解活性提供了理论指导和实践借鉴.     

Prospects of electrochemically synthesized hematite photoanodes for photoelectrochemical water splitting: A review

Hematite (α-Fe₂O₃) is found to be one of the most promising photoanode materials used for the application in photoelectrochemical (PEC) water splitting due to its narrow band gap energy of 2.1 eV, which is capable to harness approximately 40% of the incident solar light. This paper reviews the state-of-the-art progress of the electrochemically synthesized pristine hematite photoanodes for PEC water splitting. The fundamental principles and mechanisms of anodic electrodeposition, metal anodization, cathodic electrodeposition and potential cycling/pulsed electrodeposition are elucidated in detail. Besides, the influence of electrodeposition and annealing treatment conditions are systematically reviewed; for examples, electrolyte precursor composition, temperature and pH, electrode substrate, applied potential, deposition time as well as annealing temperature, duration and atmosphere. Furthermore, the surface and interfacial modifications of hematite-based nanostructured photoanodes, including elemental doping, surface treatment and heterojunctions are elaborated and appraised. This review paper is concluded with a summary and some future prospects on the challenges and research direction in this cutting-edge research hotspot. It is anticipated that the present review can act as a guiding blueprint and providing design principles to the scientists and engineers on the advancement of hematite photoanodes in PEC water splitting to resolve the current energy- and environmental-related concerns.     

光电解水制氢耦合生物质醇/醛氧化的研究进展

生物质醇/醛是一类重要的生物基平台化合物, 通过催化氧化重整可将其进一步转化为高值含氧化学品或燃料. 太阳能驱动的光电催化技术是实现生物质醇/醛氧化最为绿色高效的途径之一. 与传统光电解水制氢相比, 利用生物质醇/醛氧化来替代阳极析氧过程不仅可以提高阳极产物的附加值, 同时可以提升太阳能到氢能的转化效率. 因此, 光电解水制氢耦合生物质醇/醛氧化对绿氢提效降本和高值化学品合成具有重要意义. 本文综合评述了光电解水制氢耦合生物质醇/醛的氧化反应机理, 总结了目前光电催化技术在生物质醇/醛氧化方面的研究进展, 最后对该领域所面临的机遇和挑战进行了展望.     

硫化钴装饰BiVO4光阳极提升其光电化学水分解性能

太阳能驱动的光电化学(PEC)水分解可以有效地将太阳能转化为化学能,作为解决环境排放和能源危机最具前景的途径之一,已经引起了科学界的广泛关注.PEC水分解系统由两个半反应组成:在光阳极上的析氧反应(OER)和光阴极上的析氢反应(HER).PEC系统的太阳能转化效率主要由光阳极/电解质界面的OER过程所决定,这是一个非常复杂且涉及质子偶联的多步四电子转移过程.钒酸铋(BiVO₄)是应用于PEC水分解的典型且具有实际应用前景的光阳极材料之一.然而,由于不良的表面电荷转移、电荷在光阳极/电解质结面处的表面复合以及缓慢的OER动力学等因素,导致BiVO₄的PEC性能受到严重限制.本文开发了一种新颖有效的解决方案,以低成本、高电导率和具有快速电荷转移能力的硫化钴装饰来提升BiVO₄光阳极的PEC活性,X射线多晶衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征,研究结果表明CoS成功装饰于BiVO₄表面.采用紫外-可见吸收光谱(UV-VisDRS)研究了BiVO₄和复合光阳极CoS/BiVO₄的光学性质,结果表明,与纯的BiVO₄相比,CoS/BiVO₄光阳极在可见光范围内光吸收能力有所增强.将制备的BiVO₄和CoS/BiVO₄光阳极应用于PEC分解水实验中,结果表明,相对于1.23 V可逆氢电极,在光照下,CoS/BiVO₄光阳极的光电流密度显著提升,可高达3.2 m Acm^-2,是纯BiVO₄的2.5倍以上.与纯BiVO₄相比,CoS/BiVO₄光阳极的起始氧化电位显示出负向偏移0.2 V,表明析氧过电势得到有效减小.入射光子转换效率(IPCE)测试结果表明,CoS/BiVO₄光阳极的入射光子转换效率在500 nm之前的可见光范围内得到明显提升,其中,CoS/BiVO₄的IPCE值在380 nm处达到最大.此外,由于CoS的装饰作用,CoS/BiVO₄光阳极的电荷注入效率和电荷分离效率均得到较大的提升,分别达到75.8%(相较于纯BiVO₄光阳极的36.7%)和79.8%(相较于纯BiVO₄光阳极的66.8%).电化学阻抗谱(EIS)测试结果表明,通过CoS的装饰,CoS/BiVO₄光阳极的界面电荷转移电阻得到有效降低,证明其界面电荷转移动力学得到有效提升.光致发光光谱测试结果表明,CoS的装饰显著提高了BiVO₄的光生电子-空穴对的分离效率,进一步证明BiVO₄表面的CoS装饰在其PEC分解水中起着非常积极的作用.本文为通过表面修饰设计应用于PEC水分解的有效的光阳极提供了新思路.     

TiO_2/CuPc/NiFe-LDH photoanode for efficient photoelectrochemical water splitting

Photoelectrochemical(PEC) water splitting is a promising approach for renewable hydrogen production.However,the practical PEC solar-to-fuel conversion efficiency is still low owing to poor light absorption and rapid recombination of charge carriers in photoelectrode.In this work,we report a ternary photoanode with simultaneously enhancement of light absorption and water oxidation efficiency by introducing copper phthalocyanine(CuPc) and nickel iron-laye red double hydroxide(NiFe-LDH) on TiO_2(denoted as TiO_2/CuPc/NiFe-LDH).An experimental study reveals that CuPc loading on TiO_2 bring strong visible light absorption;NiFe-LDH as an oxygen evolution reaction catalyst efficiently accelerates the surface water oxidation reaction.This synergistic effect of CuPc and NiFe-LDH gives enhanced photocurrent density(2.10 mA/cm2 at 0.6 V vs.SCE) and excellent stability in the ternary TiO_2/CuPc/NiFeLDH photoanode.     

Research Progress of Ferrite Materials for Photoelectrochemical Water Splitting

Photoelectrochemical(PEC)water splitting is an effective strategy to convert solar energy into clean and renewable hydrogen energy.In order to carry out effective PEC conversion,researchers have conducted a lot of exploration and developed a variety of semiconductors suitable for PEC water splitting.Among them,metal oxides stand out due to their higher stability.Compared with traditional oxide semiconductors,ferrite-based photoelectrodes have the advantages of low cost,small band gap,and good stability.Interestingly,due to the unique characteristics of ferrite,most of them have various tunable features,which will be more conducive to the development of efficient PEC electrode.However,this complex metal oxide is also troubled by severe charge recombination and low carrier transport efficiency,resulting in lower conversion efficiency compared to theoretical value.Based on this,this article reviews the structure,preparation methods,characteristics and modification strategies of various common ferrites.In addition,we analyzed the future research direction of ferrite for PEC water splitting,and looked forward to the development of more efficient catalysts.     

Chlorophyll sensitized BiVO4 as photoanode for solar water splitting and CO2 conversion

Converting solar energy into valuable hydrogen and hydrocarbon fuels through photoelectrocatalytic water splitting and CO_2 reduction is highly promising in addressing the growing demand for renewable and clean energy resources. However, the solar-to-fuel conversion efficiency is still very low due to limited light absorption and rapid bulk recombination of charge carriers. In this work, we present chlorophyll(Chl) and its derivative sodium copper chlorophyllin(ChlCuNa), as dye sensitizers, modified BiVO_4 to improve the photoelectrochemical(PEC) performance. The photocurrent of BiVO_4 is surprisingly decreased after a direct sensitization of Chl while the sensitization of ChlCuNa obviously enhances photocurrent of BiV04 electrodes by improved surface hydrophilicity and extended light absorption.ChlCuNa-sensitized BiV04 achieves an improved H_2 evolution rate of 5.43 μmol h~(-1) cm~(-2) in water splitting and an enhanced HCOOH production rate of 2.15 μmol h~(-1) cm~(-2) in CO_2 PEC reduction, which are1.9 times and 2.4 times higher than pristine BiVO_4, respectively. It is suggested that the derivative ChlCuNa is a more effective sensitizer for solar-to-fuel energy conversion and CO_2 utilization than Chl.     

NiFe双氢纳米粒子有效提高BiVO4光阳极光电化学水分解性能

近年来, 太阳能驱动的光电化学水分解作为一种高效、环保、可持续的技术, 已经引起了广泛的关注. 为了更好地使用光电化学技术将太阳能转化为化学能, 至关重要的是提高光电极材料的光吸收和光转化效率. BiVO4禁带宽度(Eg=2.4-2.5 eV)小, 具有很好的可见光响应能力, 因此BiVO4光电极材料引起了广泛关注. 但是, 当单独BiVO4作为光电阳极材料时, 电子-空穴对分离弱、载流子传输慢, 从而使BiVO4不能很好地在光电化学水分解中发挥作用. 为了缓解或解决此类限制性因素, 本课题组通过水热法合成了NiFe双氢纳米粒子, 并将其负载于BiVO4电极表面, 光电催化分解水实验表明其产氢效率得到大幅度提高. 同时制备了Ni(OH)2/BiVO4和Fe(OH)2/BiVO4电极并用于研究NiFe/BiVO4电极的反应机理. 在上文基础上, 本文采用电子扫描电镜(SEM)、高分辨投射电镜(HRTEM)、X射线衍射(XRD)、紫外可见漫反射(UV-Vis DRS)等表征手段和线性扫描伏安法(LSV)和电流时间(I-t)等对其光电化学活性进行了测试, 研究了NiFe/BiVO4电极在发生水氧化时的反应机理. SEM结果表明, Ni(OH)2是以纳米片组成的纳米球负载于多孔BiVO4表面; 而当Fe(OH)2负载于BiVO4表面时, BiVO4的纳米尺寸减小; NiFe-LDH纳米粒子负载于BiVO4表面时, 可以明显看见BiVO4纳米颗粒表面包裹着一层更小的纳米粒子.这证明了Ni(OH)2, Fe(OH)2和NiFe-LDH纳米粒子均成功负载于BiVO4表面. 这也得到HRTEM结果的确认. UV-Vis DRS结果表明NiFe-LDH纳米粒子能有效拓宽BiVO4的吸收边, 从而增加对可见光的吸收, 增加了对光的利用率. LSV测试结果表明, 暗反应条件下Ni(OH)2/BiVO4比NiFe/BiVO4和Fe(OH)2/BiVO4电极的起始电位更低, 说明Ni(OH)2有更好的传输电子性能; 而在光照条件下, 在同一电位时NiFe/BiVO4比Ni(OH)2/BiVO4和Fe(OH)2/BiVO4电极的光电流值更高. 值得注意的是, 此时Ni(OH)2/BiVO4比Fe(OH)2/BiVO4电极的光电流值低, 这又说明Fe(OH)2比Ni(OH)2对光更敏感. 因此当NiFe-LDH纳米粒子负载于BiVO4表面时, 不仅提高了BiVO4光电极的光吸收效率, 而且加速了载流子的传输从而抑制了光生电子-空穴的复合, 使反应过程中的量子效率得到提高.     

Modeling,Simulation, and Implementation of Solar‐Driven Water‐Splitting Devices

An integrated cell for the solar‐driven splitting of water consists of multiple functional components and couples various photoelectrochemical (PEC) processes at different length and time scales. The overall solar‐to‐hydrogen (STH) conversion efficiency of such a system depends on the performance and materials properties of the individual components as well as on the component integration, overall device architecture, and system operating conditions. This Review focuses on the modeling‐ and simulation‐guided development and implementation of solar‐driven water‐splitting prototypes from a holistic viewpoint that explores the various interplays between the components. The underlying physics and interactions at the cell level is are reviewed and discussed, followed by an overview of the use of the cell model to provide target properties of materials and guide the design of a range of traditional and unique device architectures.     

二维材料用于电催化析氢的研究进展

电催化水分解因其丰富的原料来源和环境友好被认为是一种有前途的制氢技术. 开发用于电催化析氢反应的高效电催化剂是迫切需要的. 随着石墨烯的兴起, 二维(2D)材料因其独特的物理、 化学和电子特性, 已逐渐成为水电解的潜在候选材料. 本文介绍了二维材料用于电化学水分解产生氢气的最新进展, 概括了二维材料的合成方法, 总结了改善二维材料电化学析氢性能的策略, 讨论了该领域面临的挑战和未来的发展机遇.