Using fluorene to lock electronically active moieties in thermally activated delayed fluorescence emitters for high-performance non-doped organic light-emitting diodes with suppressed roll-off

Thermally activated delayed fluorescence (TADF) emitters with aggregation-induced emission (AIE) features are hot candidates for non-doped organic light-emitting diodes (OLEDs), as they are highly emissive in solid states upon photoexcitation. Nevertheless, not every AIE-TADF emitter in the past had guaranteed decent efficiencies in non-doped devices, indicating that the AIE character alone does not necessarily afford ideal non-doped TADF emitters. As intermolecular electron-exchange interaction that involves long-lived triplet excitons plays a dominant role in the whole quenching process of TADF, we anticipate that it is the main reason for the different electroluminescence performances of AIE-TADF emitters. Therefore, in this work, we designed two TADF emitters SPBP-DPAC and SPBP-SPAC by modifying a reported less successful emitter BP-DPAC with extra fluorenes to increase intermolecular distances and attenuate this electron-exchange interaction. With the fluorene lock as steric hindrance, SPBP-DPAC and SPBP-SPAC exhibit significantly higher exciton utilization in non-doped films due to the suppressed concentration quenching. The non-doped OLEDs based on SPBP-DPAC and SPBP-SPAC show an excellent maximum external quantum efficiency (EQE) of 22.8% and 21.3% respectively, and what''s even more promising is that ignorable roll-offs at practical brightness (e.g., 1000 and 5000 cd m⁻²) were realized. These results reveal that locking the phenyl rings as steric hindrance can not only enhance the molecular rigidity, but also cause immediate relief of concentration quenching, and result in significant performance improvement under non-doped conditions. Our approach proposes a feasible molecular modification strategy for AIE-TADF emitters, potentially increasing their applicability in OLEDs.

Two TADF emitters were developed by modifying a reported less successful emitter BP-DPAC with fluorene to suppress concentration quenching. Their non-doped OLEDs displayed excellent EQEs of 22.8% and 21.3% with well-suppressed roll-off.     

The water-soluble indolium-based fluorescence probes for detection of the extreme acidity or extreme alkalinity

In this work, 3,3′-(((1E,1′E)-(H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,1-dimethyl-1H-benzo[e]indole-3-ium-2,3-diyl))bis(propane-1-sulfonate) (1), 3,3’-(((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(3,3-dimethyl-3H-indole-1-ium-2,1-diyl))bis(propane-1-sulfonate) (2), 2,2’-((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,3,3-trimethyl-3H-indol-1-ium) iodide (3) and 2,2’-((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,1,3-trimethyl-1H-benzo[e]indol-3-ium) iodide (4) were designed and synthesized by ethylene bridging of the N-substituted indolium salts and the Tröger’s Base (TB) framework. The probes exhibited a longer absorption and emission wavelength and the emission wavelength of them in dichloromethane (DCM) was more than 600 nm, performed a red fluorescence. All of the probes could work on the extreme acidic and the extreme alkaline environments and showed a good liner response in the working pH range. Especially, 2 and 4 were soluble in water and manifested a good pH sensing in a water system. Also, ¹H NMR analysis illustrated how these dyes worked as the pH-sensitive fluorescence probes. In addition, they performed excellent reversibility, high selectivity and good photostability.     

Efficient deep blue OLEDs with extremely low efficiency roll-off at high brightness based on phenanthroimidazole derivatives

Phosphorescent and thermally activated delayed fluorescence(TADF) emitters can break through the spin statistics rules and achieve great success in external quantum efficiency(over 5%).However,maintaining high efficiency at high brightness is a tremendous challenge for applications of organic light emitting diodes.Hence,we reported two phenanthroimidazole derivatives PPI-An-CN and PPI-An-TP and achieved extremely low efficiency roll-off with about 99% of the maximum external quantum efficiency(EQE_(max)) maintained even at a high luminance of 1000 cd/cm2 based non-doped devices.When doping the two materials in CBP(4,4'-bis(N-carbazolyl)-1,1'-biphenyl),the doped devices still exhibited excellent stability at high brightness with CIE_y≈0.07 and low turn-on voltage of only 2.8 V.The state-ofthe-art low efficiency roll-off makes the new materials attractive for potential applications.It is the first time that the Fragment Contribution Analysis method has been used to analyze the excited state properties of the molecules in the field of OLEDs,which helps us understand the mechanism more intuitively and deeply.     

New electron-donating segment to develop thermally activated delayed fluorescence emitters for efficient solution-processed non-doped organic light-emitting diodes

Thermally activated delayed fluorescent(TADF) materials capable of efficient solution-processed nondoped organic light-emitting diodes(OLEDs) are of important and practical significance for further development of OLEDs. In this work, a new electron-donating segment, 2,7-di(9 H-carbazol-9-yl)-9,9-dimethyl-9,10-dihydroacridine(2 Cz-DMAC), was designed to develop solution-processable non-doped TADF emitters. 2 Cz-DMAC can not only simultaneously increase the solubility of compounds and suppress har...     

Remarkable mechanochromism and force-induced thermally activated delayed fluorescence enhancement from white-light-emitting organic luminogens with aggregation-induced emission

The development of organic materials with white-light emission and thermally activated delayed fluorescence (TADF) properties in the solid state remain a challenge. Herein, a series of white-light-emitting organic luminogens have been developed and are found to show aggregation-induced delayed fluorescence (AIDF) characteristics. The AIDF emitters present dual-emission consisted of prompt fluorescence and TADF in the crystalline state. Their white-light emissions can be easily tuned by altering the chemical structure and connecting position of the heterocyclic aromatic substituent. Under the stimuli of mechanical force and solvent vapor, the compounds exhibit remarkable and reversible mechanochromism, in which their emission colors are switchable between white and yellow. Upon grinding, they also display linearly tunable luminescence colors, as well as force-induced TADF enhancement, which may be associated with the more compact molecular packing and the restriction of intramolecular motions. The results from time-resolved emission scanning and theoretical calculation suggest that the dual-emission of the AIDF luminogens likely results from the twisted intramolecular charge transfer transitions of the molecules, and the reversible mechanochromism properties probably stem from the interconversion of the quasi-axial and the quasi-equatorial conformations.     

Highly Efficient Nondoped OLEDs with Negligible Efficiency Roll‐Off Fabricated from Aggregation‐Induced Delayed Fluorescence Luminogens

Purely organic emitters that can efficiently utilize triplet excitons are highly desired to cut the cost of organic light‐emitting diodes (OLEDs), but most of them require complicated doping techniques for their fabrication and suffer from severe efficiency roll‐off. Herein, we developed novel luminogens with weak emission and negligible delayed fluorescence in solution but strong emission with prominent delayed components upon aggregate formation, giving rise to aggregation‐induced delayed fluorescence (AIDF). The concentration‐caused emission quenching and exciton annihilation are well‐suppressed, which leads to high emission efficiencies and efficient exciton utilization in neat films. Their nondoped OLEDs provide excellent electroluminescence efficiencies of 59.1 cd A⁻¹, 65.7 lm W⁻¹, and 18.4 %, and a negligible current efficiency roll‐off of 1.2 % at 1000 cd m⁻². Exploring AIDF luminogens for the construction of nondoped OLEDs could be a promising strategy to advance device efficiency and stability.     

New carbazole-substituted siloles for the fabrication of efficient non-doped OLEDs

New aggregation-induced emission molecules of carbazole-substituted siloles are prepared, based on which efficient non-doped OLEDs are fabricated, offering high external quantum efficiencies of up to 5.63%.     

Red/Near‐Infrared Thermally Activated Delayed Fluorescence OLEDs with Near 100 % Internal Quantum Efficiency

Developing red thermally activated delayed fluorescence (TADF) emitters, attainable for both high‐efficient red organic light‐emitting diodes (OLEDs) and non‐doped deep red/near‐infrared (NIR) OLEDs, is challenging. Now, two red emitters, BPPZ‐PXZ and mDPBPZ‐PXZ, with twisted donor–acceptor structures were designed and synthesized to study molecular design strategies of high‐efficiency red TADF emitters. BPPZ‐PXZ employs the strictest molecular restrictions to suppress energy loss and realizes red emission with a photoluminescence quantum yield (Φ_PL) of 100±0.8 % and external quantum efficiency (EQE) of 25.2 % in a doped OLED. Its non‐doped OLED has an EQE of 2.5 % owing to unavoidable intermolecular π–π interactions. mDPBPZ‐PXZ releases two pyridine substituents from its fused acceptor moiety. Although mDPBPZ‐PXZ realizes a lower EQE of 21.7 % in the doped OLED, its non‐doped device shows a superior EQE of 5.2 % with a deep red/NIR emission at peak of 680 nm.     

Aggregation-induced delayed fluorescence luminogens: the innovation of purely organic emitters for aqueous electrochemiluminescence

Due to overcoming the limitation of aggregation caused quenching (ACQ) of solid-state emitters, aggregation-induced emission (AIE) organic luminogens have become a promising candidate in aqueous electrochemiluminescence (ECL). However, restricted by the physical nature of fluorescence, current organic AIE luminogen-based ECL (AIECL) faces the bottleneck of low ECL efficiency. Here, we propose to construct de novo aqueous ECL based on aggregation-induced delayed fluorescence (AIDF) luminogens, called AIDF-ECL. Compared with the previous organic AIE luminogens, purely organic AIDF luminogens integrate the superiorities of both AIE and the utilization of dark triplets via thermal-activated spin up-conversion properties, thereby possessing the capability of close-to-unity exciton utilization for ECL. The results show that the ECL characteristics using AIDF luminogens are directly related to their AIDF properties. Compared with an AIECL control sample based on a tetraphenylethylene AIE moiety, the ECL efficiency of our AIDF-ECL model system is improved by 5.4 times, confirming the excellent effectiveness of this innovative strategy.

Electrochemiluminescence (ECL) using an aggregation-induced delayed fluorescence (AIDF) organic luminogen, i.e. AIDF-ECL, was reported for the first time, featuring “lighting” dark triplets (ca. 75% in total) for all-exciton-harvesting ECL applications.     

Molecular Design of Non-doped OLEDs Based on a Twisted Heptagonal Acceptor: A Delicate Balance between Rigidity and Rotatability

The development of efficient non-doped organic light-emitting diodes (OLEDs) is highly desired but very challenging because of a severe aggregation-caused quenching effect. Herein, we present a heptagonal diimide acceptor (BPI), which can restrict excessive intramolecular rotation and inhibit close intermolecular π–π stacking due to well-balanced rigidity and rotatability of heptagonal structure. The BPI-based luminogen ( DMAC-BPI ) shows significant aggregation-induced delayed florescence with an extremely high photoluminescence quantum yield (95.8 %) of the neat film, and the corresponding non-doped OLEDs exhibit outstanding electroluminescence performance with maximum external quantum efficiency as high as 24.7 % and remarkably low efficiency roll-off as low as 1.0 % at 1000 cd m⁻², which represents the state-of-the-art performance for non-doped OLEDs. In addition, the synthetic route to DMAC-BPI is greatly streamlined and simplified through oxidative Ar−H/Ar−H homo-coupling reaction.     

Molecular engineering on all ortho-linked carbazole/oxadiazole hybrids toward highly-efficient thermally activated delayed fluorescence materials in OLEDs

The highest efficiency thermally activated delayed fluorescence(TADF) emitters in OLEDs are mostly based on twisted donor/acceptor(D/A) type organic molecules.Herein,we report the rational molecular design on twisted all ortho-linked carbazole/oxadiazole(Cz/OXD) hybrids with tunable D-A interactions by adjusting the numbers of donor/acceptor units and electron-donating abilities.Singlet-triplet energy bandgaps(ΔE_(ST)) are facilely tuned from～0.4,0.15 to～0 eV in D-A,D-A-D to A-D-A type compounds.This variation correlates well with triplet-excited-state frontier orbital spatial separation efficiency.NonTADF feature with solid state photoluminescence quantum yield(PLQY)10% is observed in D-A type2 CzOXD and D-A-D type 4 CzOXD.Owing to the extremely low ΔE_(ST) for efficient reverse intersystem crossing,strong TADF with PLQY of 71%-92% is achieved in A-D-A type 4 CzDOXD and 4 tCzDOXD.High external quantum efficiency from 19.4% to 22.6% is achieved in A-D-A typed 4 CzDOXD and 4 tCzDOXD.     

Aggregation‐Induced Delayed Fluorescence Luminogens for Efficient Organic Light‐Emitting Diodes

Aggregation‐induced delayed fluorescence (AIDF) can be regarded as a special case of aggregation‐induced emission (AIE). Luminogens with AIDF can simultaneously emit strongly in solid state and fully utilize the singlet and triplet excitons in organic light‐emitting diodes (OLEDs). In this work, two new AIDF luminogens, DMF‐BP‐DMAC and DPF‐BP‐DMAC, with an asymmetric D–A–D′ structure, are designed and synthesized. The characteristics of both luminogens are systematically investigated, including single crystal structures, theoretical calculations, photophysical properties and thermal stabilities. Inspired by their AIDF nature, the green‐emission non‐doped OLEDs based on them are fabricated, which afford good electroluminescence performances, with low turn‐on voltages of 2.8 V, high luminance of 52560 cd m^?2, high efficiencies of up to 14.4 %, 42.3 cd A^?1 and 30.2 lm W^?1, and very small efficiency roll‐off. The results strongly indicate the bright future of non‐doped OLEDs on the basis of robust AIDF luminogens.     

Coumarin-cored carbazole dendrimers as solution-processed non-doped green emitters for electroluminescent devices

A series of green-emitting thiophenyl coumarin-cored carbazole dendrimers containing carbazole dendrons up to the third generation as substituent were synthesized and characterization. Their optical, thermal, electrochemical, and electroluminescent properties as non-doped solution-processed light-emitters for OLEDs were investigated. By incorporating carbazole dendrons in the molecule, we are able to reduce the crystallization and retain the high emissive ability of a planar thiophenyl coumarin fluorescent core in the solid state as well as improve the thermal stability of the material. These dendrimers showed a bright-green fluorescence and can form morphologically stable amorphous thin films with glass-transition temperatures as high as 285 °C. Simple structured solution-processed OLEDs using these materials as hole-transporting non-doped emitters and BCP as a buffer layer emit a stable green electroluminescence (λ_EL=502–526 nm) with high luminance efficiencies (up to 7.92 cd/A at 7.39 mA/cm²) and high green color purity (CIE=0.26, 0.62, which are close to the pure green color).     

High‐Performance Non‐doped OLEDs with Nearly 100 % Exciton Use and Negligible Efficiency Roll‐Off

Non‐doped organic light‐emitting diodes (OLEDs) possess merits of higher stability and easier fabrication than doped devices. However, luminescent materials with high exciton use are generally unsuitable for non‐doped OLEDs because of severe emission quenching and exciton annihilation in neat films. Herein, we wish to report a novel molecular design of integrating aggregation‐induced delayed fluorescence (AIDF) moiety within host materials to explore efficient luminogens for non‐doped OLEDs. By grafting 4‐(phenoxazin‐10‐yl)benzoyl to common host materials, we develop a series of new luminescent materials with prominent AIDF property. Their neat films fluoresce strongly and can fully harvest both singlet and triplet excitons with suppressed exciton annihilation. Non‐doped OLEDs of these AIDF luminogens exhibit excellent luminance (ca. 100000 cd m^?2), outstanding external quantum efficiencies (21.4–22.6 %), negligible efficiency roll‐off and improved operational stability. To the best of our knowledge, these are the most efficient non‐doped OLEDs reported so far. This convenient and versatile molecular design is of high significance for the advance of non‐doped OLEDs.     

Strong dual-state emission of unsymmetrical and symmetrical thiazolothiazole-bridged imidazolium salts

A novel thiazolothiazole-bridged imidazole derivative (1) was found to exhibit blue fluorescence in gaseous state or in methanol and yellow fluorescence in solid state. The N-alkylation of imidazole subunit(s) in 1 using n-propyl iodide generated unsymmetrically or symmetrically alkylated thiazolothiazole-bridged imidazolium salts with good water solubility and remarkably strong emission in solution. Furthermore, the replacement of iodide counter-anion by triflate or bis(trifluoromethane sulfonyl)imide achieved remarkably strong emission in solid state and in solution as well as good water solubility. The strong fluorescence of dicationic salts with triflate and NTf₂^– counter-anions in solid state can be ascribed to their twisted and rigid structures induced by interionic C?H···F hydrogen bonding.     

Multifunctional Materials Serving as Efficient Non-Doped Violet-Blue Emitters and Host Materials for Phosphorescence

Efficient multifunctional materials acting as violet-blue emitters, as well as host materials for phosphorescent OLEDs, are crucial but rare due to demand that they should have high first singlet state (S₁) energy and first triplet state (T₁) energy simultaneously. In this study, two new violet-blue bipolar fluorophores, TPA-PI-SBF and SBF-PI-SBF , were designed and synthesized by introducing the hole transporting moiety triphenylamine (TPA) and spirobifluorene (SBF) unit that has high T₁ into high deep blue emission quantum yield group phenanthroimidazole (PI). As the results, the non-doped OLEDs based on TPA-PI-SBF exhibited excellent EL performance with a maximum external quantum efficiency (EQE_max) of 6.76 % and a violet-blue emission with Commission Internationale de L′Eclairage (CIE) of (0.152, 0.059). The device based on SBF-PI-SBF displayed EQE_max of 6.19 % with CIE of (0.159, 0.049), which nearly matches the CIE coordinates of the violet-blue emitters standard of (0.131, 0.046). These EL performances are comparable to the best reported non-doped deep or violet-blue emissive OLEDs with CIEy<0.06 in recent years. Additionally, the green, yellow and red phosphorescent OLEDs with TPA-PI-SBF and SBF-PI-SBF as host materials achieved a high EQE_max of about 20 % and low efficiency roll-off at the ultra-high luminance of 10 000 cd m⁻². These results provided a new construction strategy for designing high-performance violet-blue emitters, as well as efficient host materials for phosphorescent OLEDs.     

Tetraphenylethylene-BODIPY aggregation-induced emission luminogens for near-infrared polymer light-emitting diodes

The aggregation-induced emission(AIE) phenomenon provides a new direction for the development of organic light-emitting devices. Here, we present a new class of emitters based on 4,4-difluoro-4-bora-3 a,4 a-diaza-s-indacene(BODIPY), functionalized at different positions with tetraphenylethylene(TPE), which is one of the most famous AIE luminogens. Thanks to this modification, we were able to tune the photoluminescence of the BODIPY moiety from the green to the near-infrared(NIR)spectral range and achieve PL efficiencies of ~50% in the solid state. Remarkably, we observed an enhancement of the AIE and up to ~100% photoluminescence efficiencies by blending the TPE-substituted BODIPY fluorophores with a poly[(9,9-di-noctylfluorene-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,7-diyl)](F8 BT) matrix. By incorporating these blends in organic lightemitting diodes(OLEDs), we obtained electroluminescence peaked in the range 650–700 nm with up to 1.8% external quantum efficiency and ~2 m W/cm2 radiance, a remarkable result for red/NIR emitting and solution-processed OLEDs.     

Luminescent Cu(I) and Ag(I) coordination polymers: Fast phosphorescence or thermally activated delayed fluorescence

By applying two donor-acceptor motif molecules, 5,10-di(pyridin-4-yl)-5,10-dihydrophenazine (L1) and 10,10'-di(pyridin-3-yl)-10H,10'H-9,9'-spiroacridine (L2), as ligands and CuI/AgCF₃CO₂ as metal salt, we synthesized three coordination polymers, namely, {Cu₄(L1)₂I₄} (CP1), {Cu(L2)I·CHCl₃} (CP2) and {Ag(L2)CO₂CF₃·CHCl₃} (CP3). X-ray crystallographic analysis revealed that three coordination polymers all feature one-dimensional (1D) linear chains which are consisting of molecular boxlike units. In comparison with low photoluminescence quantum yield (PLQY) of two ligands, three coordination polymers, CP1, CP2 and CP3, present more intense photoluminescence with PLQY of 15%, 46% and 34% at room temperature respectively. The PL emission of CP1 and CP2 at room temperature could be attributed to the fast phosphorescence with lifetime both around 5 μs due to effective intersystem crossing (ISC). Whilst, it is worth noting that CP3 exhibit thermally activated delayed fluorescence (TADF) emission at room temperature.     

Alkoxy encapsulation of carbazole-based thermally activated delayed fluorescent dendrimers for highly efficient solution-processed organic light-emitting diodes

Two n-butoxy-encapsulated dendritic thermally activated delayed fluorescent(TADF) emitters(namely O-D1 and O-D2) with the first-/second-generation carbazoledendrons are designed and synthesized via C—N coupling between carbazoledendrons and 2,4,6-tris(4-bromophenyl)-1,3,5-triazine core.It is found that,compa red with the commo nly-used tert-butyl groups,the use of n-butoxy encapsulation groups can lead to smallersinglet-triplet energy gap for the dendrimers,producing stronger TADF effect together with faster reverse intersystem crossing process.Solution-processed TADF organic light-emitting diodes(OLEDs) utilizingalkoxy-encapsulated dendrimers O-D1 and O-D2 as emitters exhibitstate-of-the-art device efficiency withthe maximum external quantum efficiency up to 16.8% and 20.6%,respectively,which are ～1.6 and～2.0 times that of the tert-butyl-encapsulated counterparts.These results suggest that alkoxy encapsulation of the carbazole-based TADF dendrimers can be a promising approach for developing highly efficient emitters for solution-processed OLEDs.     

Mesogenic Groups Control the Emitter Orientation in Multi-Resonance TADF Emitter Films**

The use of thermally activated delayed fluorescence (TADF) emitters and emitters that show preferential horizontal orientation of their transition dipole moment (TDM) are two emerging strategies to enhance the efficiency of OLEDs. We present the first example of a liquid crystalline multi-resonance TADF (MR-TADF) emitter, DiKTa-LC . The compound possesses a nematic liquid crystalline phase between 80 °C and 110 °C. Importantly, the TDM of the spin-coated film shows preferential horizontal orientation, with an anisotropy factor, a, of 0.28, which is preserved in doped poly(vinylcarbazole) films. Green-emitting (λ_EL=492 nm) solution-processed OLEDs based on DiKTa-LC showed an EQE_max of 13.6 %. We thus demonstrate for the first time how self-assembly of a liquid crystalline TADF emitter can lead to the so-far elusive control of the orientation of the transition dipole in solution-processed films, which will be of relevance for high-performance solution-processed OLEDs.