Thermal analysis of some metal alkoxides

The thermal decomposition of AI(OPrⁱ)₃, Ca(OEt)₂ and Mg(OEt)₂ has been studied using differential thermal analysis and thermogravimetric techniques. The decomposition products have been isolated and identified by gas chromatography and mass spectrometry. Probable routes for the thermal decomposition of these alkoxides have been proposed.     

Decomposition pathway of diaquabis(N,N'-dimethyl-1,2-ethanediamine)Ni(II) acesulfamate

Summary Prediction of the thermal decomposition pathway of the metal complexes is very important from the theoretical and experimental point of view to determine the properties and structural differences of complexes. In the prediction of the decomposition pathways of complexes, besides the thermal analysis techniques, some ancillary techniques e.g. mass spectroscopy is also used in recent years. In the light of the molecular structures and fragmentation components, it is believed that the thermal decomposition pathway of most molecules is similar to the ionisation mechanism occurring in the mass spectrometer ionisation process. In this study, the thermal decomposition pathway of [Ni(dmen)₂(H₂O)₂](acs)₂ complex have been predicted by the help of thermal analysis data (TG, DTG and DTA) and mass spectroscopic fragmentation pattern. The complex was decomposed in four stages: a) dehydration between 84-132°C, b) loss of N,N'-dimethylethylenediamine (dmen) ligand, c) decomposition of remained dmen and acesulfamato (acs) by releasing SO₂, d) burning of the organic residue to resulting in NiO. The volatile products observed in the thermal decomposition process were also observed in the mass spectrometer ionisation process except molecular peak and it was concluded that the ionisation and thermal decomposition pathway of the complex resembles each other.     

Thermal decomposition of synthetic hydrotalcites reevesite and pyroaurite

A combination of high resolution thermogravimetric analysis coupled to a gas evolution mass spectrometer has been used to study the thermal decomposition of synthetic hydrotalcites reevesite (Ni₆Fe₂(CO₃)(OH)₁₆·4H₂O) and pyroaurite (Mg₆Fe₂(SO₄,CO₃)(OH)₁₆·4H₂O) and the cationic mixtures of the two minerals. XRD patterns show the hydrotalcites are layered structures with interspacing distances of around 8.0. Å. A linear relationship is observed for the d(001) spacing as Ni is replaced by Mg in the progression from reevesite to pyroaurite. The significance of this result means the interlayer spacing in these hydrotalcites is cation dependent. High resolution thermal analysis shows the decomposition takes place in 3 steps. A mechanism for the thermal decomposition is proposed based upon the loss of water, hydroxyl units, oxygen and carbon dioxide.     

Decomposition study of Ni–La–Mg–O precursors using thermal analysis

The thermal decomposition process of La₂O₃/MgO (La/Mg = 2, 1 and 0.5) supported nickel (15% mass/mass Ni) precursor was investigated. Thermal analysis results show distinct processes of decomposition of the samples in accordance with the composition. The mass loss at higher temperature is associated to distinct stages of decomposition of lanthanum precursors. The thermal analysis results agree with the FTIR spectra showing change in the band corresponding to carbonates and nitrates species. XRD results also confirmed the precursor’s decomposition. It can be concluded that the thermal decomposition of La₂O₃–MgO-nickel precursor depends on the La/Mg ratio and of the residual species.     

Preparation,thermal decomposition,and crystal structure of Zn(II) 2-chlorobenzoate complex with nicotinamide

A new Zn(II) 2-chlorobenzoate complex, [Zn(2-ClC₆H₄COO)₂(nad)₂] (nad = nicotinamide), was synthesized and characterized by elemental analysis, infrared (IR) spectroscopy, mass spectrometry, thermal analysis, and X-ray structure determination. The mechanism of thermal decomposition of the complex was studied by TG/DTG, DTA, IR spectroscopy, and mass spectrometry. The thermal decomposition is characterized as a two-step process. Zinc oxide was found as the final product of the thermal decomposition performed up to 900°C. Mass spectrometry was used to determine the volatiles released during thermal decomposition. The IR spectrum indicates that carboxylate is coordinated to zinc in monodentate coordination. [Zn(2-ClC₆H₄COO)₂(nad)₂] crystallizes in the monoclinic system, space group Pn, a = 10.376(2) Å, b = 10.100(1) Å, c = 12.604(1) Å, β = 100.79(1)°. The zinc is tetrahedrally coordinated by two nitrogens of nicotinamide and two oxygens of 2-chlorobenzoate.     

Thermal studies on arsenic,antimony and bismuth alkylxanthate complexes

Six xanthate derivatives of arsenic(III), antimony(III), and bismuth(III) {(ROCS₂)₃M; R=methyl, ethyl, isopropyl, n-butyl, cyclohexyl and benzyl} have been prepared and the thermal behaviour investigated by thermogravimetry. A thermal decomposition mechanism for the complexes is proposed on the basis of the thermogravimetric data and mass spectral measurements.     

Thermal studies on palladium alkyl xanthates

Eleven palladium(II) alkylxanthates: Pd(ROCSS)₂ [RMe, Et, nPr, iPr, nBu, iBu, tBu, nAm, iAm, nHex and cyclohex], have been prepared and their thermal properties investigated by thermogravimetric analysis. The complexes, although volatile under vacuum (10^?2 mm Hg), decompose without volatilization at normal atmospheric pressure leaving a residue of palladium metal at 950°C. The intermediate decomposition products were identified mass spectrometrically and a thermal decomposition mechanism is proposed.     

Mass spectra of methylsubstituted monosila- and monogermacyclobutanes, 1,2- disila- and 1,2-digermacyclopentanes. Some correlations with thermal decomposition

The mass spectra of 1,1-dimethyl-1-silacyclobutane (I—as reported by Cherniak et al.),⁶, 1,1-dimethyl-1-germacyclobutane (II), 1,1,2,2-tetramethyl-1,2-disilacyclopentane (III) and 1,1,2,2-tetramethyl-1,2-digermacyclopentane (IV) are compared and some correlations between electron-impact fragmentation and thermal decomposition are derived. The mass spectra of the germanium compounds with respect to the silicone compounds are enriched by light fragment ions and exhibit lower intensities of odd-electron ions. The composition of some ions and apparently of neutral fragments coincides with that of the unstable intermediates which are suggested in the thermal decomposition mechanism of some related compounds. The loss of C₂H₄ is more characteristic under electron-impact as well as in thermal decomposition of Si-compounds, while C₃H₆ is preferable eliminated by the Ge-compounds.     

Synthesis of bismuth mixed oxide by thermal decomposition of a coprecipitate precursor

Bismuth mixed oxide powders were prepared by oxalate coprecipitation process. The thermal decomposition behaviour of the coprecipitate precursors has been followed by thermal analysis (TG-DTA) and FTIR spectroscopy. During the decomposition of the precursor, several intermediates species were detected and a mechanism of formation of mixed oxide by this method is proposed. After the thermal treatment, the precursor obtained of suggested formula Ca₃[Bi₆O₆(C₂O₄)₄(OH)₃NO₃]0.5H₂O, has led to the formation of CaBi₂O₄ at shorter reaction time than the traditional ceramic method. In order to consolidate the results, the coprecipitation in absence of oxalic precipitant under the same conditions was examined. XRD and scanning electron spectroscopy were used to study particles sizes and morphology.     

Mass spectrometric study of the overheated vapor over lanthanide dipivaloylmethanates Ln(thd)<Subscript>3</Subscript> (Ln = Nd,Er, Yb,Lu)

A mass spectrometric study of the overheated vapor over neodymium, erbium, ytterbium, and lutetium dipivaloylmethanates has been carried out. The mass spectra of these compounds depend significantly on the degree of overheating. This fact can be interpreted in terms of the variation of the concentration and chemical composition of metal-containing molecular species with vapor temperature. As the vapor temperature is raised from 200 to 700°C, the intensity of the molecular ion [M(thd)₃]⁺ decreases relative to the [M(thd)₂]⁺ ion intensity by approximately one order of magnitude for M = Er, Yb, and Lu and by two orders of magnitude for M = Nd. This finding is evidence in favor of the thermal decomposition of the lanthanide tris(dipivaloylmethanates) occurring via a two-step mechanism initially yielding the M(thd)₂ radical.     

Influences of aging on thermal decomposition mechanism of high performance oxidizer ammonium dinitramide

Ammonium dinitramide (ADN) is one of the several promising new solid propellant oxidizers. ADN is of interest because its oxygen balance and energy content are high, and it also halogen-free. One of the most important characteristics of a propellant oxidizer, however, is stability and ADN is known to degrade to ammonium nitrate (AN) during storage, which will affect its performance. This study focused on the effects of aging on the thermal decomposition mechanism of ADN. The thermal behaviors of ADN and ADN/AN mixtures were studied, as were the gases evolved during their decomposition, using differential scanning calorimetry (DSC), thermogravimetry–differential thermal analysis-infrared spectrometry (TG–DTA-IR), and thermogravimetry–differential thermal analysis-mass spectrometry (TG–DTA-MS). The results of these analyses demonstrated that the decomposition of ADN occurs via a series of distinct stages in the condensed phase. The gases evolved from ADN decomposition were N₂O, NO₂, N₂, and H₂O. In contrast, ADN mixed with AN (to simulate aging) did not exhibit the same initial reaction. We conclude that aging inhibits early stage, low temperature decomposition reactions of ADN. Two possible reasons were proposed, these being either a decrease in the acidity of the material due to the presence of AN, or inhibition of the acidic dissociation of dinitramic acid by NO ₃ ^? .     

Mechanism of thermal decomposition of hydrated copper nitrate in vacuo

The general scheme of three-stage thermal decomposition of Cu(NO₃)₂·3H₂O to CuO has been refined based on evolved-gas-analysis data with a quadrupole mass analyzer (Jackson et al., Spectrochim. Acta Part B, 50 (1995) 1423). Quantitative evaluation of the composition of the gaseous products shows that the first stage involves primarily deaquation, and the second stage, primarily denitration of the original hydrated nitrate. The basic nitrate formed in the second stage most probably has the formula Cu(NO₃)₂·3Cu(OH)₂. It has been established that the molecular oxygen observed in the third stage of decomposition is produced by catalytic decomposition of NO₂ on the surface of CuO. The presence of Cu-containing ions in all stages of the process is consistent with the gasification mechanism of thermal decomposition.     

Clarification of Decomposition Pathways in a State-of-the-Art Lithium Ion Battery Electrolyte through 13C-Labeling of Electrolyte Components

The decomposition of state-of-the-art lithium ion battery (LIB) electrolytes leads to a highly complex mixture during battery cell operation. Furthermore, thermal strain by e.g., fast charging can initiate the degradation and generate various compounds. The correlation of electrolyte decomposition products and LIB performance fading over life-time is mainly unknown. The thermal and electrochemical degradation in electrolytes comprising 1 m LiPF₆ dissolved in ¹³C₃-labeled ethylene carbonate (EC) and unlabeled diethyl carbonate is investigated and the corresponding reaction pathways are postulated. Furthermore, a fragmentation mechanism assumption for oligomeric compounds is depicted. Soluble decomposition products classes are examined and evaluated with liquid chromatography-high resolution mass spectrometry. This study proposes a formation scheme for oligo phosphates as well as contradictory findings regarding phosphate-carbonates, disproving monoglycolate methyl/ethyl carbonate as the central reactive species.     

Thermal decomposition of poly(2-vinylpyridine): Effect of complexation with copper chloride

The thermal decomposition of complexes between poly(2-vinylpyridine) (P2VPy) and copper chloride was investigated by several techniques, including thermogravimetric analysis and mass spectrometry. P2VPy was selected as the host polymer for two reasons: its ability to form complexes with copper compounds which are soluble in high concentrations, and because it forms essentially no char upon pyrolysis. The decomposition mechanism of P2VPy changes significantly upon complexation with copper compounds. P2VPy was initially thought to be an ideal ligand for the pyrolytic formation of pure copper owing to its low carbon yield upon thermal decomposition. The presence of copper chloride during polymer decomposition alters the decomposition mechanism of the polymer and accounts for significant yields of carbonaceous char. The magnitude of this effect is dependent upon the quantity of copper present. Polymer char yields as high as 41 wt% have been obtained when each pyridine moiety is complexed by CuCl₂. Studies based on the model compound Cu(2-picoline)₂Cl₂ indicate that the diffusion length of released volatiles plays a significant role in the observed decomposition mechanisms.     

一维链状配位聚合物{[Cu(H2bttc)(H2O)3]·3H2O}n的非等温反应动力学和晶体结构

为研究配位聚合物{[Cu(H₂bttc)(H₂O)₃]·3H₂O}_n(H₂bttc=1，2，4，5-benzenetetracarboxylate)的热分解机理和非等温反应动力学进行了DSC和TG-DTG热分析。由热分析结果和FTIR光谱推测了其热分解机理；将Kissinger法、Ozawa法、积分法和微分法得到的动力学参数进行比较确定了第一个失重过程最可能的动力学模型函数。配位聚合物的X射线单晶结构分析表明它由 [Cu(H₂bttc)(H₂O)₃]_n分子链组成，并有客体水分子通过分子间氢键附着在分子链上。这一结构特点与热分析结果相一致。还有一种氢键将分子链连接起来形成二维框架，这一框架在失去配位水和结晶水后到553 K开始分解。     

Thermal decomposition studies of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>]X<Subscript>2</Subscript> (X = Cl,Br) in the solid state using TG-MS and TR-XRD

Detailed investigation on the thermal behaviour of hexaamminenickel(II) chloride and hexaamminenickel(II) bromide has been carried out by means of simultaneous TG/DTA coupled online with mass spectroscopy (TG-MS) and temperature-resolved X-ray diffraction (TR-XRD). Evolved gas analyses by TG-MS revealed the presence of NH₂, NH, N₂ and H₂ fragments in addition to ammonia during the deamination process. These transient species resulted due to the fragmentation of the evolved ammonia during pyrolysis. The intermediates formed during the thermal deamination stages were monitored by in situ TR-XRD. The final product of the decomposition was found to be nano size metallic nickel in both cases. Morphology of the complexes, intermediates and the residue formed at various decomposition stages was analysed by scanning electron microscope (SEM). Kinetic analyses using isoconversional method for deamination and dehalogenation reaction show that the activation energies vary with the extent of conversion, indicating the multi-step nature of these solid state decomposition reactions.     

Synthesis and Thermal Decomposition of [Ni2(C4H4O6)2]·7H2O

The paper describes the synthesis, characterization and thermal decomposition of nickel(II) bis(tartrato) nickelate(II) heptahydrate [Ni₂(C₄H₄O₆)₂]·7H₂O. The complex was characterized by elemental analysis, magnetic moment measurement, infrared, ESR and electronic spectroscopy. The experimental evidences indicate that complex is likely to have metal bonding. The thermal decomposition of the complex produced NiO in air at about 360°C and in nitrogen at about 380°C as the final product. Some of the intermediates produced during the thermolysis were isolated by temperature arrest technique and identified by analytical and spectroscopic methods. A tentative reaction mechanism is proposed for the thermal decomposition of the complex in air and nitrogen.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal decomposition of RDX/AP by TG–DSC–MS–FTIR

The method of TG–DSC–MS–FTIR simultaneous analysis has been used to study the thermal decomposition mechanism of the RDX/AP (1/2) mixture. TG–DSC showed that there were two mass loss processes for thermal decomposition of RDX/AP. The first one was mainly ascribed to the thermal decomposition of RDX. Addition of AP to RDX causes decomposition to take place abruptly, after melting, resulting in a very sharp and strong peak at lower temperature. The apparent activation energies, calculated by model-free Friedman method, of this process were negative. The second mass loss process of RDX/AP was confirmed to be the thermal decomposition of AP, catalyzed by RDX. This process can be divided into three stages, which were an nth-order autocatalytic and two one-dimensional diffusion stages, respectively. There was a competition among the formation reactions of N₂O, HNCO, and HCl for the first stage and between NO₂ and N₂O for the later two stages. The production of N₂O dominated in the second stage, while NO₂ did in the third stage.     

Effect of metal oxides on the evolution of aromatic hydrocarbons in the thermal decomposition of PVC

The thermal decomposition of poly(vinyl chloride) (PVC) mixed with several metal oxides was investigated by direct pyrolysis in a mass spectrometer (MS) and flash pyrolysis–gas chromatography. Our results show that the thermal decomposition of PVC occurs in two stages. Unsubstituted aromatic hydrocarbons (benzene, naphthalene, and anthracene) are evolved mainly in the first stage, alkyl-aromatics (e.g., toluene) in the second. Although the addition of some metal oxides results in an overall suppression of aromatic hydrocarbons, the unsubstituted aromatics are much more suppressed with respect to alkyl-aromatics. Furthermore, the formation of ZnCl₂ and SnCl₄ was revealed by the mass spectra of PVC–metal oxide pyrolysates. This suggests that, at least in these two cases, metal chlorides are responsible for aromatic hydrocarbon suppression. With this information a detailed reaction mechanism could be formulated for the thermal degradation of PVC.     

Autoinflammation et stabilite thermique de la poly(vinyl 4 pyridine) quaternisee—III: Autoinflammation du bromure de poly(N(oxo 3 butyl) vinyl 4 pyridinium)

The self-ignition of quaternized poly(4 vinyl pyridines) (P4VP) has been studied for three series of compounds prepared by reaction of vinyl methyl ketone (VMC) with P4VP quaternized by HBr. The self-ignition temperatures (θ_s,i) have been determined in air at atmospheric pressure as a function of the bromine and VMC concentrations. The results are similar to those for P4VP quaternized by bromoalkanes. They exhibit in particular a dependence of θ_s,i on Br content. The general shape of the self-ignition curves is qualitatively explained on the basis of a competing mechanism involving radicals and molecular brominated species in the gaseous phase. Such species have been identified by mass spectrometry, performed during the thermal decomposition of these compounds under N₂. Addition of the bromide derivatives to VMC evolved during the pyrolysis is also suggested.