Readout of superconducting flux qubit state with a Cooper pair box

We study a readout scheme of a superconducting flux qubit state with a Cooper pair box as a transmon. The qubit states consist of the superpositions of two degenerate states where the charge and phase degrees of freedom are entangled. Owing to the robustness of the transmon against external fluctuations, our readout scheme enables the quantum non-demolition and single-shot measurement of flux qubit states. The qubit state readout can be performed by using the nonlinear Josephson amplifiers after a π/2 rotation driven by an ac electric field.     

Spectroscopy and coherent manipulation of single and coupled flux qubits

Measurements of three-junction flux qubits, both single flux qubits and coupled flux qubits, using a coupled direct current superconducting quantum interference device （dc-SQUID） for readout are reported. The measurement procedure is described in detail. We performed spectroscopy measurements and coherent manipulations of the qubit states on a single flux qubit, demonstrating quantum energy levels and Rabi oscillations, with Rabi oscillation decay time TRabi =- 78 ns and energy relaxation time T~ = 315 ns. We found that the value of TRabi depends strongly on the mutual inductance between the qubit and the magnetic coil. We also performed spectroscopy measurements on inductively coupled flux qubits.     

Superconducting tetrahedral quantum bits

We propose a design for a qubit with four superconducting islands in the topology of a symmetric tetrahedron, uniformly frustrated with one-half flux quantum per loop and one-half Cooper pair per island. This structure emulates a noise-resistant spin-1/2 system in a vanishing magnetic field. The flux frustration boosts quantum fluctuations and relieves the constraints on junction fabrication. Variability of manipulation and optimized readout are additional benefits of this design.     

Improved Superconducting Qubit State Readout by Path Interference

High fidelity single shot qubit state readout is essential for many quantum information processing protocols. In superconducting quantum circuit, the qubit state is usually determined by detecting the dispersive frequency shift of a microwave cavity from either transmission or reflection. We demonstrate the use of constructive interference between the transmitted and reflected signal to optimize the qubit state readout, with which we find a better resolved state discrimination and an improved qubit readout fidelity. As a simple and convenient approach, our scheme can be combined with other qubit readout methods based on the discrimination of cavity photon states to further improve the qubit state readout.     

Observation of flux qubit states with the help of a superconducting differential double contour interferometer

The critical current of a new structure, the superconducting differential double contour interferometer (DDCI), investigated recently, depends on the parity of the sum of quantum numbers of the two superconducting loops connected in two points by two Josephson junctions. The theory confirms that the DDCI structure can be used for the ideal readout of quantum states of the flux qubit. Large jumps in the critical current and voltage enables to observe continuously the change in time the state of the flux qubit. Such observations can have fundamental importance for the investigation of macroscopic quantum systems with strongly discrete spectrum such as the flux qubit. The DDCI structure can also be used for precise measurement of a very weak magnetic field.     

Interface between topological and superconducting qubits

We propose and analyze an interface between a topological qubit and a superconducting flux qubit. In our scheme, the interaction between Majorana fermions in a topological insulator is coherently controlled by a superconducting phase that depends on the quantum state of the flux qubit. A controlled-phase gate, achieved by pulsing this interaction on and off, can transfer quantum information between the topological qubit and the superconducting qubit.     

Demonstration of quantum zeno effect in a superconducting phase qubit

Quantum Zeno effect is a significant tool in quantum manipulating and computing. We propose its observation in superconducting phase qubit with two experimentally feasible measurement schemes. The conventional measurement method is used to achieve the proposed pulse and continuous readout of the qubit state, which are analyzed by projection assumption and Monte Carlo wavefunction simulation, respectively. Our scheme gives a direct implementation of quantum Zeno effect in a superconducting phase qubit.     

Hardware for multi-superconducting qubit control and readout

We have developed an electronic hardware system for the control and readout of multi-superconducting qubit devices. The hardware system is based on the design ideas of good scalability, high synchronization and low latency. The system, housed inside a VPX-6U chassis, includes multiple arbitrary-waveform generator (AWG) channels, analog-digital-converter (ADC) channels as well as direct current source channels. The system can be used for the control and readout of up to twelve superconducting transmon qubits in one chassis, and control and readout of more and more qubit can be carried out by interconnecting the chassis. By using field programmable gate array (FPGA) processors, the system incorporates three features that are specifically useful for superconducting qubit research. Firstly, qubit signals can be processed using the on-board FPGA after being acquired by ADCs, significantly reducing data processing time and data amount for storage and transmission. Secondly, different output modes, such as direct output and sequential output modes, of AWG can be implemented with pre-encoded FPGA. Thirdly, with data acquisition ADCs and control AWGs jointly controlled by the same FPGA, the feedback latency can be reduced, and in our test a 178.4 ns latency time is realized. This is very useful for future quantum feedback experiments. Finally, we demonstrate the functionality of the system by applying the system to the control and readout of a 10 qubit superconducting quantum processor.     

Macroscopic resonant tunneling in an rf-SQUID flux qubit

We have observed the macroscopic resonant tunneling of magnetic flux between macroscopically distinct quantum states in a superconducting flux qubit.The dependences of the macroscopic resonant tunneling on the barrier height of the potential well,the flux bias and the initial state are investigated.Detailed measurements of the tunneling rate as a function of the flux bias reveal the feature of the quantum noise in the superconducting flux qubit.     

Quantum State Transfer between Charge and Flux Qubits in Circuit-QED

We propose a scheme to implement quantum state transfer in a hybrid circuit quantum electrodynarnics （QED） system which consists of a superconducting charge qubit, a flux qubit, and a transmission line resonator （TLR）. It is shown that quantum state transfer between the charge qubit and the flux qubit can be realized by using the TLR as the data bus.     

One-shot quantum measurement using a hysteretic dc SQUID

We propose a single shot quantum measurement to determine the state of a Josephson charge quantum bit (qubit). The qubit is a Cooper pair box and the measuring device is a two junction superconducting quantum interference device (dc SQUID). This coupled system exhibits a close analogy with a Rydberg atom in a high Q cavity, except that in the present device we benefit from the additional feature of escape from the supercurrent state by macroscopic quantum tunneling, which provides the final readout. We test the feasibility of our idea against realistic experimental circuit parameters and by analyzing the phase fluctuations of the qubit.     

Observation of quantum jumps in a superconducting artificial atom

We continuously measure the state of a superconducting quantum bit coupled to a microwave readout cavity by using a fast, ultralow-noise parametric amplifier. This arrangement allows us to observe quantum jumps between the qubit states in real time, and should enable quantum error correction and feedback--essential components of quantum information processing.     

Interaction-free measurements with superconducting qubits

An interaction-free measurement protocol is described for a quantum circuit consisting of a superconducting qubit and a readout Josephson junction. By measuring the state of the qubit, one can ascertain the presence of a current pulse through the circuit at a previous time without any energy exchange between the qubit and the pulse.     

Preparation of multi-photon Fock states and quantum entanglement properties in circuit QED

We demonstrate the controllable generation of multi-photon Fock states in circuit quantum electrodynamics （circuit QED）. The external bias flux regulated by a counter can effectively adjust the bias time on each superconducting flux qubit so that each flux qubit can pass in turn through the circuit cavity and thereby avoid the effect of decoherence. We further investigate the quantum correlation dynamics of coupling superconducting qubits in a Fock state. The results reveal that the lower the photon number of the light field in the number state, the stronger the interaction between qubits is, then the more beneficial to maintaining entanglement between qubits it will be.     

Coupling nitrogen-vacancy centers in diamond to superconducting flux qubits

We propose a method to achieve coherent coupling between nitrogen-vacancy (NV) centers in diamond and superconducting (SC) flux qubits. The resulting coupling can be used to create a coherent interaction between the spin states of distant NV centers mediated by the flux qubit. Furthermore, the magnetic coupling can be used to achieve a coherent transfer of quantum information between the flux qubit and an ensemble of NV centers. This enables a long-term memory for a SC quantum processor and possibly an interface between SC qubits and light.     

Characterization of a two-transmon processor with individual single-shot qubit readout

We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.     

Vacuum Rabi oscillations in a macroscopic superconducting qubit oscillator system

We have observed the coherent exchange of a single energy quantum between a flux qubit and a superconducting LC circuit acting as a quantum harmonic oscillator. The exchange of an energy quantum is known as the vacuum Rabi oscillation: the qubit is oscillating between the excited state and the ground state and the oscillator between the vacuum state and the first excited state. We also show that we can detect the state of the oscillator with the qubit and thereby obtained evidence of level quantization of the LC circuit. Our results support the idea of using oscillators as couplers of solid-state qubits.     

Experimental test of a superconducting digital interface for vortex qubits

We have developed and tested a classical superconducting logic interface to a qubit prototype based on two macroscopically distinct quantum states of a vortex in a long Josephson junction. The initial state preparation as well as the readout of a qubit is demonstrated by using a relatively simple Rapid Single Flux Quantum (RSFQ) circuit. RSFQ logic appears as a very feasible choice for constructing an interface between superconducting qubits and room-temperature electronics.Received: 16 January 2004, Published online: 20 April 2004PACS: 74.40. + k Fluctuations (noise, chaos, nonequilibrium superconductivity, localization, etc.) - 74.50. + r Tunneling phenomena; point contacts, weak links, Josephson effects - 74.78.-w Superconducting films and low-dimensional structures     

Parametric control of a superconducting flux qubit

Parametric control of a superconducting flux qubit has been achieved by using two-frequency microwave pulses. We have observed Rabi oscillations stemming from parametric transitions between the qubit states when the sum of the two microwave frequencies or the difference between them matches the qubit Larmor frequency. We have also observed multiphoton Rabi oscillations corresponding to one- to four-photon resonances by applying single-frequency microwave pulses. The parametric control demonstrated in this work widens the frequency range of microwaves for controlling the qubit and offers a high quality testing ground for exploring nonlinear quantum phenomena of macroscopically distinct states.     

Quasiparticle relaxation of superconducting qubits in the presence of flux

Quasiparticle tunneling across a Josephson junction sets a limit for the lifetime of a superconducting qubit state. We develop a general theory of the corresponding decay rate in a qubit controlled by a magnetic flux. The flux affects quasiparticles tunneling amplitudes, thus making the decay rate flux-dependent. The theory is applicable for an arbitrary quasiparticle distribution. It provides estimates for the rates in practically important quantum circuits and also offers a new way of measuring the phase-dependent admittance of a Josephson junction.