Enthalpy of solution of phenoxyalcohols solubilized in aqueous sodium dodecylsulfate and hexadecyltrimethylammonium bromide solutions

The enthalpy of solution of phenoxy 2-ethanol, 1 phenoxy,-3 propanol and benzylalcohol was determined at 25 °C in aqueous sodium dodecylsulfate and hexadecyltrimethylammonium bromide solution, up to 0.2 mol/kg surfactant concentration. Using the pseudo-phase model, the standard enthalpy of transfer and the partition coefficient of the alcohols between micelle and water are calculated. The latter quantity is found to be systematically larger when derived from enthalpy than from free energy measurements. Using the so-called compensation plot, the solution thermodynamics of aromatic and aliphatic alcohols in aqueous sodium dodecylsulfate and in the octane+water systems are compared. Aromatic alcohols display an anomalous behavior in the octane+ water system but not in the micellar one.The standard enthalpy of solution of various alcohols presents, when plotted against hexadecyltrimethylammonium bromide concentration, a shoulder in the region around 0.05 mol/kg; a discussion is presented on the evidence for alleged micellar structural changes in aqueous micellar systems.     

Micellar solubilization thermodynamics of acetophenone in surfactant mixtures: Case of benzyldimethyltetradecylammonium chloride and trimethyltetradecylammonium chloride

The thermodynamics of micellar solubilization of acetophenone in mixtures of two cationic surfactants [benzyldimethyltetradecylammonium chloride +trimethyltetradecylammonium chloride] has been derived from calorimetric measurements at controlled solute activity. The partition coefficient between micelles and water as well as the standard enthalpy and entropy of transfer between micelles and water were calculated. The results were compared to the case of benzylalcohol in the same cationic mixtures. For acetophenone, the variation of all thermodynamic transfer functions with micellar composition may be described by the regular solution formalism. The same conclusion has been achieved for most polar solutes in various surfactant mixtures: favorable interaction between unlike surfactants induces an unfavorable micellar solubilization. Exceptions should be found with the cases where solute solubilization induces profound micellar changes. It seems to be the case with some alcohols in the cationic surfactant mixtures studied.     

Mixed micelle formation and solubilization behavior toward polycyclic aromatic hydrocarbons of binary and ternary cationic-nonionic surfactant mixtures

Water solubility enhancements of polycyclic aromatic hydrocarbons (PAHs), viz., naphthalene, anthracene and pyrene, by micellar solutions at 25 degrees C using two series of surfactants, each involving two cationic and one nonionic surfactant in their single as well as equimolar binary and ternary mixed states, were measured and compared. The first series was composed of three surfactants, benzylhexadecyldimethylammonium chloride (C16BzCl), hexadecyltrimethylammonium bromide (C16Br), and polyoxyethylene(20)mono-n-hexadecyl ether (Brij-58) with a 16-carbon (C16) hydrophobic chain; the second series consisted of dodecyltrimethylammonium bromide (C12Br), dodecylethyldimethylammonium bromide (C12EBr), and polyoxyethylene(4)mono-n-dodecyl ether (Brij-30) with a 12-carbon (C12) chain. Solubilization capacity has been quantified in terms of the molar solubilization ratio, the micelle-water partition coefficient, the first stepwise association constant between solubilizate monomer and vacant micelle, and the average number of solubilizate molecules per micelle, determined employing spectrophoto-, tensio-, and flourimetric techniques. Cationic surfactants exhibited lesser solubilization capacity than nonionics in each series of surfactants with higher efficiency in the C16 series compared to the C12 series. Increase in hydrophobicity of head groups of cationics by incorporation of ethyl or benzyl groups enhanced their solubilization capacity. The mixing effect of surfactants on mixed micelle formation and solubilization efficiency has been discussed in light of the regular solution approximation (RSA). Cationic-nonionic binary combinations showed better solubilization capacity than pure cationics, nonionics, or cationic-cationic mixtures, which, in general, showed increase with increased hydrophobicity of PAHs. Equimolar cationic-cationic-nonionic ternary surfactant systems showed lower solubilization efficiency than their binary cationic-nonionic counterparts but higher than cationic-cationic ones. In addition, use of RSA has been extended, with fair success, to predict partition coefficients of ternary surfactant systems using data of binary surfactants systems. Mixed surfactants may improve the performance of surfactant-enhanced remediation of soils and sediments by decreasing the applied surfactant level and thus remediation cost.     

混合胶束中Gemini阳离子表面活性剂14-s-14与常规表面活性剂的协同作用:连接臂及反离子效应(英文)

The mixed micelle formation of binary cationic 14-s-14 gemini with conventional single chain surfactants was studied by conductivity measurements.The critical micelle concentration(cmc) and the degree of counterion binding values(g) of the binary systems were determined.The results were analyzed by applying regular solution theory(RST) to calculate micellar compositions(X),activity coefficients(f1,f2),and the interaction parameters(β).The synergistic interactions of all the investigated cationic gemini+conventional surfactant combinations were found to be dependent upon the length of hydrophobic spacer of the gemini surfactant.The excess Gibbs free energy of mixing was evaluated,and it indicated relatively more stable mixed micelles for the binary combinations.     

Micropartioning and solubilization enhancement of 1,2-bis(bis(4-chlorophenyl) methyl)diselane in mixed micelles of binary and ternary cationic-nonionic surfactant mixtures

The aqueous solubilization of the organoselenium compound viz., 1,2-bis(bis(4-chlorophenyl)methyl)diselane [(ClC(6)H(4))(2)CHSe](2) has been investigated experimentally in micellar solutions of two cationic (hexadecyltrimethylammonium bromide, CTAB, hexadecyltrimethylammonium chloride, CTAC) and one nonionic (polyoxyethylene(20)mono-n-hexadecyl ether, Brij 58) surfactants possessing the same hydrocarbon "tail" length and in their single as well as equimolar binary and ternary mixed states. Solubilization capacity determined with spectrophotometry and tensiometry has been quantified in terms of molar solubilization ratio and micelle-water partition coefficient. FTIR, UV-vis, fluorescence and zeta potential measurements have been utilized to ascertain the interaction of organochalcogen compound with surfactants. Equimolar cationic-nonionic surfactant combinations show better solubilization capacity than pure cationics or nonionics, whereas equimolar cationic-cationic-nonionic ternary surfactant systems exhibit intermediate solubilization efficiency between their single and binary counterparts. Locus of solubilization of [(ClC(6)H(4))(2)CHSe](2) in different micellar solutions was probed by UV-visible spectroscopy. The investigation has presented precious information for the preference of mixed surfactants for solubilizing water-insoluble compounds. Indeed the solubilization aptitude of these surfactants is not merely related to molar capacity. The results furnish adequate support to justify comprehensive exploration of the surfactant properties that influence solubilization.     

Interfacial and micellar properties of anionic azo dye-surfactant binary systems

The association of an anionic dye C.I. Reactive Orange 16 (RO16) and different types of surfactants, i.e., anionic surfactant sodium dodecylsulfate, nonionic surfactants poly(oxyethylene) ethers (C _m POE₁₀, m = 12, 16, and 18; C₁₂POE _n , n = 4, 10, and 23), was investigated using tensiometry in a certain micellar concentration range. RO16 was shown to aggregate in water when its concentration is above the threshold value. The surface tension lowering and critical micellar concentration (CMC) values were interpreted on the same grounds as those for surfactants mixtures. The tensiometric measurements of dye-surfactant systems are carried out as a function of the molar concentration of solution at 25°C. Using Rubingh’s regular solution theory, the values of interaction parameters were found to be negative for all studied binary mixtures. These negative values indicate that there is an attractive interaction of the surfactants in mixed micelles and reflect synergistic behavior of a mixture. In all studied systems, deviations from ideal behavior were observed depending on the type of surfactant. Interaction parameters calculated using regular solution theory are changed from −2.62 to −12.43. The smallest deviation from ideal behavior is obtained for the RO16-C₁₂POE₄ mixed system; i.e., in the case when nonionic surfactant has the shortest alkyl chain and the smallest number of ethylene oxide units. The text was submitted by the authors in English.     

HEXADECYLTRIMETHYLAMMONIUM BROMIDE + TETRADECYLTRIMETHYL-AMMONIUM BROMIDE MIXED MICELLES IN AQUEOUS GLYCOL OLIGOMERS

The conductances of hexadecyltrimethylammonium bromide (HTAB) + tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of HTAB (α_HTAB) were measured in pure water as well as in the presence of various aqueous ethylene glycol oligomers containing 5, 10 and 20 wt% of each additive in their respective binary mixtures at 30°C. From the conductivity data, the critical micellar concentration (cmc), degree of counter ion association (χ) and the standard free energy of transfer of the surfactant hydrocarbon chain from the medium to the micelle (ΔG^O _HP ) for HTAB and TTAB were computed. From the conductivity data of mixed surfactants systems, apart from cmc and χ, the regular solution theory parameters were also computed in order to explore the non-ideality in the mixed micelle formation in the presence of additives. The micellar parameters of both kind of surfactants and their mixtures show a significant dependence on the amount as well as on the number of repeating units of glycol oligomers. However, the non-ideality of mixed micelle formation remains unaffected in the presence of additives. These results have been explained on the basis of the medium effects of aqueous additive and it has been concluded that there are no significant interactions of glycol oligomers with the micelles of single and mixed surfactants.     

Solubilization of Polycyclic Aromatic Compounds into n-Decyltrimethylammonium Perfluorocarboxylate Micelles

Solubilization of polycyclic aromatic compounds in aqueous dilute solutions of three cationic amphiphiles was studied. The maximum additive concentrations (MACs) of the aromatic compounds were constant below their critical micelle concentrations (cmcs) and monotonically increased above the cmcs. The first stepwise association constants (K(1)) between a solubilizate monomer and a vacant micelle were evaluated from the MACs for the solubilizates using the mass action model for solubilization into micelles in the dilute solution. The standard Gibbs energy changes of solubilization (DeltaG degrees ) were calculated from K(1), and the enthalpy and entropy changes of solubilization were estimated from the temperature dependence. MACs of each surfactant at the same surfactant concentration above the cmc were different depending on the cmc, but there was little difference in the DeltaG degrees values. Some differences appeared in the enthalpy and entropy values in accordance with their micellar size or degrees of counterion binding to micelles. DeltaG degrees for solubilization decreased linearly with carbon number of aromatic solubilizate for each micellar solution. Copyright 2000 Academic Press.     

Cyclic voltammetry and viscosity measurements of aggregated assemblies of anionic surfactants with nonionic surfactants and triblock copolymers

Cyclic voltammetry (CV) and viscosity measurements have been employed to study the aggregation behavior of mixed micellar systems of anionic surfactant (dioctyl sulfosuccinate sodium salt, AOT) with conventional nonionic surfactants such as Brij 35/TritonX-100/Tween 20/Tween 80/Myrj 45 and two triblock copolymers (L64 and F68). Critical micelle concentration (cmc) values have been determined for various micellar systems from CV measurements using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Diffusion coefficient (D) has been evaluated from Randles–Sevcik equation which showed an overall decrease for most of the binary systems. The negative values of interaction parameters (β) obtained from regular solution theory suggest the synergistic behavior in all the binary systems except AOT + Tween 80 mixtures. The mixed systems of AOT with triblock copolymers showed stronger synergistic interactions than that of mixed systems of AOT with nonionic surfactants. A comparative evaluation of mixed systems of anionic surfactants AOT and sodium dodecyl sulfate with Myrj 45 and AOT + L64 and F68 has been made on the basis of different micellar parameters and structural properties of surfactants. Viscosity measurements also show similar type of interactions in the mixed micelles.     

Partition equilibria of phenols between water and anionic micelles : Correlation with the Octanol/Water System

The partition equilibria of a series of thirty substituted phenols bearing different chemical groups between aqueous solutions and sodium dodecylsulfate micelles was investigated by using micellar high-performance liquid chromatography and by studying the variation of the acidity constant. The contribution of each substituent to the free energy of transfer from water to micelles was estimated. The group contribution approach is shown to be valid for polysubstituted compounds under well defined conditions. A comparison with partition coefficients obtained in classical two-phase system (1-octanol/water), frequently used as biochemical model systems, is discussed     

Energetics of anionic surfactant-additive systems at the cloud point

The energetics of clouding in anionic surfactant (SDBS) and tetrabutylammonium bromide system in the presence of additives, such as ureas, amino acids and sugars is reported. The change of standard Gibbs energy of solubilization (ΔG _s ^o) for all of the additives was found to be negative. The values of change of standard enthalpy (ΔH _s ^o) and that of standard entropy (TΔS _s ^o) values were found to depend on the type and chemistry of the additive. The results were explained on the basis including chemistry of additives, their effect on water structure, and solubilization of additives either in the micellar or in aqueous phases.     

Cloud point temperature of polyoxyethylene-type nonionic surfactants and their mixtures

The cloud point temperature, T(c), was investigated for aqueous solutions of poly(oxyethylene) alkyl ethers, C(n)E(m), and their mixtures. The experimental T(c)'s for single surfactant systems were analyzed according to the Flory-Huggins model for cloud point phenomenon, and the enthalpy and the entropy changes associated with the process of the separation of micellar solution into pure water and pure surfactant were estimated. It was found that the enthalpy-entropy compensation relationship holds for this process. The Flory-Huggins model was extended to the binary surfactant mixtures, and the expression of T(c) as a function of the composition was derived assuming the regular solution for mixed micelles. The experimental results of T(c) obtained for mixtures of C(n)E(m) were well reproduced by the model calculation. Discussion is given concerning the interaction parameters of different surfactant species in mixed micelles determined by this model calculation.     

Micellisation behaviour of mixtures of sodium dodecylsulphate and sodium lauroylsarcosinate in water

The critical micelle concentrations of binary mixtures of sodium dodecylsulphate (SDS) and sodium lauroylsarcosinate (SLAS) have been determined in water by conductivity measurements at different mole fractions for each of the components. The critical micelle concentrations were slightly lower than that predicted from ideal mixing theory indicating positive synergistic interactions in mixed micelle formation. The results of the mixed systems were analysed using the Regular Solution Theory and the approach based on the Gibbs–Duhem equation which allowed for the determination of the composition of the mixed micelle, the activity coefficients and the pair-wise molecular interaction parameter β. The β values were all negative at all mole fractions investigated, showing a slight deviation from ideality, with an average value of –0.27. The excess free energy of the mixed systems was also calculated and the values were all negative for the mixed systems studied, an indication that the mixed micelles are thermodynamically stable relative to the individual component. This thermodynamic parameter also exhibits symmetrical behaviour with respect to micellar composition suggestive of a regular solution behaviour of the mixed surfactant system.     

Solubilization of phospholipid bilayers by C14-alkyl betaine/anionic mixed surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X _zwitter) and unilamellar liposomes were investigated. Solubilization was detected as a decrease in static lightscattering of liposome suspensions. Three parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system a) saturated the liposomesRe _sat; b) resulted in 50% solubilization of liposomesRe _50%, and c) led to a complete solubilization of these structuresRe _sol. These parameters corresponded to theRe at which light scattering stars to decrease, reaches 50% of the original value and shows no further decrease. From these parameters the surfactant partition coefficients for these three steps (K _sat,K _50% andK _sol) were also determined. The mixed systems were formed byN-tetradecyl-N, N-dimethylbetaine (C₁₄-Bet) and sodium dodecyl sulphate (SDS) in PIPES buffer at pH 7.20. Liposomes were formed by egg phosphatidylcholine and phosphatidic acid (9:1 molar ratio). When the range ofX _zwitter was about 0.4–0.6Re andK parameters showed a maximum, whereas the critical micelle concentration (CMC) of these systems exhibited a minimum. Given that the ability of the surfactant systems to solubilize liposomes is inversely related toRe _sol, this capacity appeared to be directly correlated with the CMC of the systems. The progressive rise ofK during the process indicates that an increasing surfactant partition equilibrium governs the interaction process from the saturation until the solubilization of vesicles, the free surfactant concentration remaining almost constant with similar values to the CMC for each mixed system studied.     

H3PO4改性PS-EDTA树脂对水相中Cu2+、Zn2+和Cd2+的吸附性能研究

大孔氯甲基化聚苯乙烯小球先后与乙二胺、2-氯乙酸反应得EDTA型螯合树脂(PS-EDTA),再用磷酸在室温处理得PS-EDTA/P树脂。PS-EDTA/P树脂被用于水相中Cu2+、Zn2+和Cd2+的吸附净化处理,探讨了溶液的pH值、初始金属离子浓度、时间、温度等因素对吸附性能的影响,并研究了其对重金属离子的吸附动力学和热力学。结果表明,PS-EDTA/P树脂对Cu2+和Zn2+的吸附符合Langmuir等温式、对Cd2+的吸附符合Freundlich等温式,准二级吸附动力学方程能够很好地描述3种金属离子在树脂上的吸附动力学行为。同时,PS-EDTA/P树脂对重金属吸附的热力学参数表明,PS-EDTA/P树脂对Cu2+、Zn2+和Cd2+的吸附是一个自发的、吸热的过程。已吸附Cu2+、Zn2+和Cd2+的树脂可以用0.1mol/L HCl解吸,解吸后的树脂对Cu2+、Zn2+和Cd2+仍具有较高的吸附量。     

Monomeric and polymeric anionic gemini surfactants and mixed surfactant systems in micellar electrokinetic chromatography. Part I: characterization and application as novel pseudostationary phases

Sodium di(undecenyl) tartarate monomer (SDUT), a vesicle-forming amphiphilic compound possessing two hydrophilic carboxylate head groups and two hydrophobic undecenyl chains gemini surfactant, was prepared and polymerized to form a polymeric gemini surfactant (i.e., poly-SDUT). These anionic surfactant systems with carboxylate (SDUT and poly-SDUT) and sulfate (sodium dodecyl sulfate, SDS) head groups as well as mixed surfactant systems (SDS/SDUT, SDS/poly-SDUT, and SDUT/poly-SDUT) were then applied as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). The SDUT and poly-SDUT were characterized using various analytical techniques. Retention factors of 36 benzene derivatives were calculated in 20 mM phosphate buffer of each surfactant system. The retention factor values of the test solutes show that there are distinctive selectivity differences between the surfactant systems. Solute-pseudostationary phase interactions in MEKC were also examined by determining the free energy of transfer of the substituted functional groups from the aqueous buffer phase into the pseudostationary phase.     

Solubilization of phenols in anionic polyelectrolyte gels with adsorbed cationic surfactant

Solubilization isotherms for various phenols in cetylpyridinium chloride (CPC)-polyelectrolyte gel aggregates have been determined in order to compare solubilization within these aggregates with that in free micelles and to examine the effects of gel chemistry and structure on solubilization. The isotherms describing solubilization are quite similar to those found for free surfactant in solution. Solutes that are more hydrophobic give rise to larger solubilization constants with trends similar to what is seen for hydrophobic effects in adsorption from aqueous solutions onto hydrophobic solids. The solubilization constants decrease as the fraction of solute in the aggregates increases, indicating that the solutes partition into the palisade region of the aggregates. Solubilization is found to be quite insensitive to changes in gel structure (cross-linker varying from 1% to 3%) and chemistry (poly(acrylic acid) versus poly(methacrylic acid) and neutralization from 50% to 100%). However, the switch from poly(acrylic acid) to poly(methacrylic acid) did give rise to a slight decrease in magnitude of the slope of the isotherm. The most significant factors appear to be the initial concentration of surfactant in solution and the ratio of surfactant solution to gel amount. A decrease in surfactant concentration (especially combined with an increase in solution volume) gives rise to a decrease in solubilization constants.     

Spectroscopic investigations in molecularly organized solvent media. Part 3. Examination of the nitromethane selective quenching rule in aqueous anionic + cationic and anionic + nonionic mixed surfactant solutions

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 20 representative PAH solutes dissolved in micellar sodium dodecylsulfate (SDS) + cetyltrimethylammonium bromide (CTAB), SDS + dodecyltrimethylammonium bromide (DTAB), SDS + Brij-35, and SDS + sodium octanoate (SO) mixed surfactant solvent media. Experimental results show that nitromethane quenched fluorescence of all 8 alternant PAHs studied in the four different solvent systems. Unexpected quenching behavior was observed, however, in the case of nonalternant PAHs. Nitromethane quenched fluorescence emission of nonalternant PAHs dissolved in the SDS + SO solvent media, which is contrary to the selective quenching rule. In the case of the mixed anionic + cationic surfactant solvent media, nitromethane quenching selectivity was restored at concentration ratios of approximately 4?:?1 (anionic:cationic) or less.     

CETYLPYRIDINIUM CHLORIDE + TETRADECYLTRIMETHYLAMMONIUM BROMIDE MIXED MICELLES IN POLYETHYLENE GLYCOL 1000 + WATER MIXTURES*

The conductances of cetylpyridinium chloride (CPyCl) + tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of CPyCl (x_CPyCl) were measured in aqueous binary mixtures of polyethylene glycol 1000 (PEG 1000) containing 0.5, 1, 2, 5 and 10 wt% of PEG 1000 at 30°C. From the conductivity data, the critical micellar concentration (cmc), degree of counter ion association (χ) and the standard free energy of micelle formation (ΔG^o _M ) of CPyCl and TTAB were computed. The DG^o _M value is further divided into the hydrophobic contribution of free energy of transfer of the surfactant hydrocarbon chain from the medium to the micelle (ΔG^o _HP ), and the energy associated with the surface contributions (ΔG^o _s ) consisting of electrostatic interactions between the head groups and counter ions. Both contributions show a linear dependence on the amount of PEG additive. These results have been explained on the basis of the medium effects of aqueous PEG.

The mixed micelle formation by CPyCl+TTAB show non-ideal behavior which is quite similar in the absence, as well as in the presence, of PEG additive as evaluated by using the regular solution theory. The interaction parameter, b, is always negative and remains almost constant with respect to the amount of PEG additive. This indicates that the mixed micelle formation occurs mainly due to the synergistic interactions between the unlike surfactant monomers only.