Stereoregulation in the polymerization of methyl α-ethylacrylate by n-BuLi in toluene

The polymerization of methyl α-ethylacrylate was carried out in toluene by n-BuLi at various temperatures. The yield of the polymer decreased with increase in the polymerization temperature and at 30°C and above no polymer was obtained, indicating that the ceiling temperature of this monomer lay between 0 and 30°C. The isotacticity increased with an increase in the polymerization temperature and at 0°C a highly isotactic polymer was obtained. The fractionation of the polymer obtained at ?78°C showed that the polymer was a mixture of isotactic and syndiotactic ones. Upon the addition of a small amount of methanol or water in the polymerization mixture the isotacticity of the polymer increased while the yield decreased. Syndiotactic polymer was obtained in the polymerization by n-BuLi in tetrahydrofuran as well as by diisobutyl aluminum diphenylamide in toluene.     

Step-growth cationic polymerization of α-hydroxyisopropylferrocene

α-Hydroxyisopropylferrocene, HPF, was synthesized in good yield and polymerized at 20°C with either SnCl₄ or BF₃OEt₂. The polymerization proceeds by self-alkylation of the stable intermediate ferrocenylcarbenium ion on the cyclopentadienyl ring to form oligomers that contain both homoannular and heteroannular links. The unusually high stability of the α-isopropylferrocenylcarbenium ion was demonstrated by synthesizing and isolating α-isopropylferrocenylcarbenium tetrafluoborate from HPF and using it to initiate the polymerization of styrene. Initiation was successful at 20° and at 0°C, but no polymerization occurred ?78°C. The condensation of ferrocene and acetone in the presence of AlCl₃ gave oligomers having structures very similar to those obtained from the cationic polymerization of isopropenylferrocene.     

Stereospecific polymerization of benzyl α-(alkoxymethyl) acrylates

α-(Alkoxymethyl) acrylates, such as methyl α-(phenoxymethyl) acrylate, benzyl α-(methoxymethyl)acrylate (BMMA), benzyl α-(benzyloxymethyl)acrylate, and benzyl α-(tert-butoxymethyl)acrylate, were synthesized, and their polymerizability and the stereoregularity of the polymers obtained by radical and anionic methods were investigated. The radically obtained polymers were found to be atactic by ¹³C- and ¹H-NMR analyses, but the polymers obtained with lithium reagents in toluene at −78°C were highly isotactic. Further, it is noteworthy that isotactic polymers were also produced with lithium reagents even in tetrahydrofuran. Effects of polymerization temperature and counter cation on stereoregularity were clearly observed in the polymerization of BMMA, and a potassium reagent afforded an almost atactic polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 721–726, 1997     

Polymerization of α-methyleneindane: A cyclic analog of α-methylstyrene

α-Methyleniedane (MI), a cyclic analog of α-methylstyrene which does not undergo radical homopolymerization under standard conditions, was synthesized and subjected to radical, cationic, and anionic polymerizations. MI undergoes radical polymerization with α,α′-azobis(isobutyronitrile) in contrast to α-methylstyrene, owing to its reduced steric hindrance, though the polymerization is slow even in bulk. Cationic and anionic polymerization of MI with BF₃OEt₂ and n-butyllithium, respectively, proceed rapidly. The thermal degradation behavior of the polymer depends on the polymerization conditions. The anionic and radical polymers are heteortactic-rich. Reactivity ratios in bulk radical copolymerization on MI (M₂) with methacrylate (MMA, M₁) were determined at 60°C (r₁ = 0.129 and r₂ = 1.07). In order to clarify the copolymerization mechanism, radical copolymerization of MI with MMA was investigated in bulk at temperatures ranging from 50 to 80°C. The Mayo–Lewis equation has been found to be inadequate to describe the result due to depolymerization of MI sequences above 70°C.     

Stereoregularity of polystyrene-β,β-d2

The 100-MHz methine proton spectra of polystyrene-β,β-d₂ obtained by radical and cationic initiators consisted of four peaks at 2.35, 2.25, 2.17, and 2.03 ppm, the proportion of which changed with polymerization conditions such as catalyst, solvent, and temperature. The spectrum was interpreted in terms of pentad sequences assuming Bernoullian statistics and the stereoregularity was determined. Polystyrene-β,β-d₂ prepared by radical initiators had a syndiotactic-rich configuration, independent of polymerization temperature. Polymers obtained by cationic initiators had lower racemic dyads. Cationic polymerization in toluene at 0°C gave a polymer of an almost random configuration. It was revealed that nondeuterated polystyrene of a random configuration can be distinguished from syndiotactic-rich polystyrene as well as the isotactic polymer by 100 MHz NMR spectroscopy.     

Synthesis and polymerization of racemic and optically active β-substituted β-propiolactones. II: β-monosubstituted and β-disubstituted monomers and polymers with different optical purities

β-(trichloromethyl)-β-propiolactone (CCl₃-PL), β-(trifluoromethyl,methyl)-β-propiolactone (CF₃, Me-PL) and β-(trifluoromethyl,ethyl)-β-propiolactone (CF₃,Et-PL) have been obtained by the reaction of ketene with chloral, 1,1,1-trifluoroacetone and 1,1,1-trifluorobutanone, respectively. Chiral catalysis lead to optically active monomers. The enantiomeric excess of the lactones has been measured by ¹H-NMR spectroscopy, in the presence of 2,2,2-trifluoro-1-(9-anthryl)ethanol or an europium chiral shift reagent. Polymerizations have been carried out in bulk or in toluene, at 60°C or 80°C, using mainly organometallic initiators. The Polymers become insoluble and crystalline at enantiomeric excesses over 80% for CCl₃-PL and 70% for CF₃,Me-PL. Melting temperatures were recorded from 238 to 268°C for poly(CCl₃-PL) and from 78 to 100°C for poly(CF₃,Me-PL), depending upon the molecular weight and the enantiomeric excess. The ¹³C-NMR specroscopy of poly(CCL₃-PL) indicates that the polymerization of the corresponding lactone leads to polymers of increasing degrees of isotacticity with the enantiomeric excess of the monomer.     

Radical polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate,a dimer of methyl acrylate,as a polymerizable α-substituted acrylate

Polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate (MMEA), which is known as a dimer of methyl acrylate, were studied in relation to steric hindrance-assisted polymerization. The propagating polymer radical from MMEA was detected as a five-line spectrum and quantified by ESR spectroscopy during the bulk polymerization at 40–80°C. The absolute rate constants of propagation and termination (κ_p and κ_t) for MMEA at 60°C (κ_p = 19 L/mol s and κ_t = 5.1 × 10⁵ L/mol s) were evaluated using the concentration of the propagating radical at the steady state. The balance of the propagation and termination rates allows polymer formation from MMEA. The polymerization rate of MMEA at 60°C was less than that of MMA by a factor of about 4 at a constant monomer concentration. Although no influence of ceiling temperature was observed at a temperature ranging from 40 to 70°C, addition-fragmentation in competition with propagation reduced the molecular weight of the polymer. The content of the unsaturated end group was estimated to be 0.1% at 60°C to the total amount of the monomer units consisting of the main chain. MMEA exhibited reactivities almost similar to those of MMA toward polymer radicals. It is concluded that MMEA is one of the polymerizable acrylates bearing a substituted alkyl group as an α-substituent. Characterization of poly(MMEA) was also carried out. © 1996 John Wiley & Sons, Inc.     

Cationic polymerization of α,β-disubstituted olefins. VI. Steric structure of poly(methyl propenyl ether) obtained by cationic catalysts

The steric structure of poly(methyl propenyl ether) obtained by cationic polymerization was studied by NMR spectra. From the analysis of β-methyl and α-methoxyal spectra, it was found that the tacticities of the α-carbon were different from those of the β-carbon in all polymers obtained. In the crystalline polymers obtained from the trans isomer by homogeneous catalysts, BF₃·O(C₂H₅)₂ or Al(C₂H₅)Cl₂, and from the cis isomer by a heterogeneous catalyst, Al₂(SO₄)₃–H₂SO₄ complex, the structure of polymers was threo-di-isotactic. Though the configurations of all α-carbons were isotactic, a small amount of syndiotactic structure was observed in the β-carbon. On the other hand, in the amorphous polymer obtained from cis isomer by the homogeneous catalyst, the configuration of the α-carbon was isotactic, but that of the β-carbon was atactic. These facts suggest that the type of opening of a monomeric double bond is complicated, or that carbon–carbon double bond in an incoming monomer rotates in the transition state. From these experimental results, a probability treatment was proposed from the diad tacticity of α,β-disubstituted polymers. It shows that the tacticity is decided by a polymerization mechanism different from that proposed by Bovey.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Stereoregularity of poly(alkyl α-chloroacrylates) and mechanism of isotactic polymerization

The catalytic activity of the complexes prepared by the reaction of Grignard reagents with ketones, esters, and an epoxide as polymerization catalysts of methyl and ethyl α-chloroacrylates was investigated. The modifiers which gave isotactic polymers were α,β-unsaturated ketones such as benzalacetophenone, benzalacetone, dibenzalacetone, mesityl oxide, and methyl vinyl ketone, and α,β-unsaturated esters such as ethyl cinnamate, ethyl crotonate, and methyl acrylate. Catalysts with butyl ethyl ketone, propiophenone, and propylene oxide as modifiers produced atactic polymers but no isotactic polymers. It was revealed that the complex catalysts having a structure ? C?C? O? MgX (X is halogen) gave isotactic polymers. The mechanism of isotactic polymerization was discussed. In addition, for radical polymerization of ethyl α-chloroacrylate, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH_i^* ? ΔH_s^* = 910 cal/mole and ΔS_i^* ? ΔS_s^* = 0.82 eu.     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Stereospecific polymerization of α-methylstyrene by friedel-crafts catalysts

The relationship between stereoregularity and polymerization conditions of α-methylstyrene has been studied by means of NMR spectra. The effects of solvents and various Freidel-Crafts catalysts have been investigated. The stereoregularity of poly-α-methylstyrene increased with increased polymer solubility in the solvent used and with decreasing polymerization temperature. This behavior is completely different from the stereospecific polymerization of vinyl ethers and methyl methacrylate in homogeneous systems. This may be due to the strong steric repulsion exerted by the two substituents in the α-position of α-methylstyrene. For example, with BF₃ · O(C₂H₅)₂ as catalyst at ?78°C., atactic polymer is obtained in n-hexane, a nonsolvent for α-methylstyrene, whereas highly stereoregular polymer is produced in toluene or methylene chloride, good solvents for the polymer. However, the polarity of the solvent and the nature of the catalyst hardly affect the stereoregularity of the polymer.     

Evidence for α-elimination from neopentyl chloride in the gas phase

Experimental evidence is presented for a unimolecular gas-phase Wagner-Meerwein shift in neopentyl chloride pyrolysis. In the decomposition of α,α-neopentyl chloride-d₂ at 445°C, maximally inhibited by cyclohexene, the initial products were isotopically pure 2-methyl-1-butene-d₂ and 2-methyl-2-butene-d₁. Rearrangement, accompanied by loss of either α- or γ-hydrogen in the formation of hydrogen chloride, is consistent with an incipient ion-pair type of transition state. The cyclohexene maximally inhibited pyrolysis of neopentyl chloride was also examined over the temperature range 424–478°C and Arrhenius parameters of E, 258.7 kJ/mole and logA/sec^?1, 13.78, were determined.     

Structure and Isotope Effects of the β‐H Agostic (α‐Diimine)Nickel Cation as a Polymerization Intermediate

Single‐crystal X‐ray characterization of cationic (α‐diimine)Ni‐ethyl and isopropyl β‐agostic complexes, which are key intermediates in olefin polymerization and oligomerization, are presented. The sharp Ni‐C_α‐C_β angles (75.0(3)° and 74.57(18)°) and short C_α−C_β distances (1.468(7) and 1.487(5) Å) provide unambiguous evidence for a β‐agostic interaction. An inverse equilibrium isotope effect (EIE) for ligand coordination upon cleavage of the agostic bond highlights the weaker bond strength of Ni−H relative to the C−H bond. An Eyring plot for β‐hydride elimination–olefin rotation–reinsertion is constructed from variable‐temperature NMR spectra with ¹³C‐labeled agostic complexes. The enthalpy of activation (ΔH ^≠) for β‐H elimination is 13.2 kcal mol⁻¹. These results offer important mechanistic insight into two critical steps in polymerization: ligand association upon cleavage of the β‐agostic bonds and chain‐migration via β‐H elimination.     

Polyisobutylene-containing block polymers by sequential monomer addition. X. Synthesis of poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) thermoplastic elastomers

Preparatory to triblock synthesis experiments, the cationic polymerization of α-methylstyrene (αMeSt) was investigated using the 2-chloro-2,4,4-trimethylpentane (TMPCI)/TiCl₄ initiating system in the presence of triethylamine (Et₃N) as electron donor (ED) and CH₃Cl/n-hexane mixed solvent in the ?80 to ?40°C range. Conversions are influenced by temperature, [TiCl₄], [Et₃N], and [αMeSt]. The polymerization of αMeSt is living at ?80°C: Both termination and chain transfer to monomer are frozen out, however, initiation is slow relative to propagation. Highly syndiotactic (>94%) Pα Mest was obtained. At?60deg;C initiator efficiency is ca. 100%, but termination becomes evident. Et₃N may act both as Ed and as proton scavenger. Novel poly(α-methystyrene-b-isobutylene-b-α-methylstyrene) (PαMeSt-PIB-PαMeSt) triblocks have been synthesized by adding αMeSt to biliving polyisobutylene carbocations (⊕PIB⊕) in the ?80 to ?40°C range. The effects of temperature, solvent polarity, and [Et₃N] on the block copolymerization have been investigated. At ?80°C, the rate of crossover from ⊕PIB⊕ to αMeSt is lower than that of propagation of PαMeSt⊕, so that the triblock is contaminated by PIB and PIB-b-PαMeSt. At ?60°C, crossover occurs preferentially. The rate of propagation relative to that of crossover is also reduced by lowering the solvent polarity and increasing the [Et₃N]. High crossover efficiency and blocking efficiency can be obtained under optimum blocking conditions. The triblocks are novel thermoplastic elastomers (TPEs). © 1994 John Wiley & Sons, Inc.     

Equilibrium anionic polymerization of α-methylstyrene in p-dioxane

The equilibrium anionic polymerization of α-methylstyrene in p-dioxane, with potassium as initiator, has been investigated at 5, 15, 25, and 40°C by using high-vacuum techniques. The comparison of these results with those obtained previously for the equilibrium polymerization of α-methylstyrene in tetrahydrofuran revealed that, although the values of ΔG_1c, the free-energy change upon the polymerization of 1 mole of liquid monomer to 1 bases-mole of liquid amorphous polymer of infinite chain length, are the same for both systems, there is a distinct effect of the solvent. This effect is reflected in the value of monomer equilibrium concentration and its variation with polymer concentration and is explained in terms of a solvent–monomer and solvent–polymer interaction parameter.     

Poly(β-amino acid)s. IV. Synthesis and conformational properties of poly(α-isobutyl-L-aspartate)

Poly(α-isobutyl-L -aspartate) was prepared by the polycondensation reaction of p-nitrophenyl ester of α-isobutyl-L -aspartate and the conformation of the poly(β-amino acid) was investigated by X-ray diffraction, polarized infrared, circular dichroism (CD), optical rotatory dispersion (ORD), and NMR spectroscopy. α-Isobutyl β-p-nitrophenyl-L -aspartate hydrochloride and hydrobromide were used as monomers and dimethylformamide, chloroform, and chlorobenzene, as solvents. A high-molecular-weight polymer with [η] 1.0 dl/g (dichloroacetic acid, 25°C) was formed in the polymerization of the hydrochloride in chloroform at 25°C. The X-ray diagram and polarized infrared spectrum of the stretched polymer film obtained from a chloroform solution suggested a cross-β-form as the most probable structure in the solid state. The CD spectra of the polymer in a 2,2,2-trifluoroethanol (TFE) solution and its film cast from the solution showed a peak at 205 nm and a trough at 190 nm which were assigned to a β-structure. The polymer was associated in chloroform. The NMR and ORD spectra in chloroform were similar to those in TFE, which suggests that the polymer also exists in the β-structure in chloroform. The addition of small amounts of dichloroacetic acid and sulfuric acid to chloroform and TFE solutions, respectively, destroyed the β-structure. A random copolymer of α-isobutyl-L -aspartate with β-alanine was also prepared by polycondensation reaction. The copolymer apparently did not form an ordered structure in the solid state or in solution.     

Synthesis of stereoregular poly[(2S,3S)-benzyl β-3-methylmalate]

The asymmetric lactone (3 S, 4 R)-3-methyl-4-benzyloxycarbonyl-2-oxetanone ( 6 ) was anionically polymerized to give an insoluble, crystalline, highly isotactic polymer with (2 S, 3 S)-benzyl β-3-methylmalate repeating units. Solubility was achieved by copolymerization of 6 with the recemic (R, S)-butyl malolactonate ( 7 ). The semicrystalline copolymer was characterized (M̄_n = 107 000, T_g = 29,6°C, T_m = 161°C, [α] = 1,5 deg · dm⁻¹ · g⁻¹ · cm³) and its stereosequence investigated by ¹³C NMR.     

On the interaction of triphenylmethyl salts with α-methylstyrene

The interaction of triphenylmethyl salts with α-methylstyrene and 1,1-diphenylethylene was investigated. With 1,1-diphenylethylene at a monomer-initiator ratio of 2 (room temperature), mainly 1,1,3-triphenyl-3-methyl-indane was isolated, whereas at a ratio of 100 (?10°C), the dimer 1,1,3,3-tetraphenylbutene-1 mainly formed. In both cases no addition of the trityl group was registered. In the interaction of α-methylstyrene with Ph₃C⁺SbCl at a monomer-initiator ratio of 2(room temperature) a pure 1,3,3-trimethyl-1-phenylindane was isolated and no addition of the trityl group to the double bond was recorded. The initiation reaction of α-methylstyrene polymerization by trityl and chlorinated trityl salts was studied at temperatures from ?20 to 0°C and different concentrations. The oligomers obtained with (pCI-C₆H₄)₃C⁺ were investigated by elemental analysis and fluorescence spectroscopy. The presence of Ph₃CH in the reaction mixture was demonstrated by GLC and NMR spectra. The results obtained give evidence that the initiation of α-methylstyrene polymerization involves hydride abstraction from the monomer.     

Poly(alkyl α-chloroacrylates). V. Preparation and properties of methyl,ethyl, and isopropyl polymers of varied tacticity

Polymers of different tacticities, from highly isotactic to highly syndiotactic, were prepared from methyl, ethyl, and isopropyl α-chloroacrylates. These polymers were characterized for tacticity by infrared spectroscopy and 100 and 300 MHz nuclear magnetic resonance (NMR) and for thermal properties by differential scanning calorimetry (DSC). After corrections were made for molecular weight effects, the observed glass temperature-tacticity results were analyzed, and it was determined that the maximum differences in glass temperatures of the purely isotactic compared to the purely syndiotactic polymers should be 92°C for the methyl ester, 86°C for the ethyl ester, and 68°C for the isopropyl ester polymers. The highly isotactic polymers of all three esters were crystalline. Possible polymerization reaction mechanisms are discussed on the basis of the triad and tetrad tacticity values observed and the calculated propagation statistics.