Thermal stability and UV-shielding properties of polymethyl methacrylate and polystyrene modified with calcium carbonate nanoparticles

The influences of nanosized CaCO₃ on the thermal and optical properties embedded in poly(methyl methacrylate) (PMMA) and polystyrene (PS) were investigated. Calcium carbonate nanoparticles were synthesized by in situ deposition technique, and its nano size (32–35 nm) was confirmed by scanning electron microscope (SEM) and X-ray studies. Nanocomposites samples of PMMA/CaCO₃ and PS/CaCO₃ were prepared with different filler loading (0–4 wt%) of CaCO₃ nanoparticles by solution mixing technique. The Fourier transform infrared analysis confirmed that CaCO₃ nanoparticles were present in the polymers matrices. The morphology and elemental composition of nanocomposites were evaluated by SEM and energy dispersive X-ray spectroscopy. The thermal properties of nanocomposites were characterized by differential scanning calorimetric, thermogravimetric, and differential thermogravimetry analysis, and the results indicate that the incorporation of CaCO₃ nanoparticles could significantly improve the thermal properties of PMMA/CaCO₃ and PS/CaCO₃ nanocomposites. The glass transition temperature (T _g ) and decomposition temperature (T _d ) of nanocomposites with 4 wt% of CaCO₃ nanoparticles were increased by 30 and 24 K in case of PMMA/CaCO₃ and 32  and 15 K in the case of PS/CaCO₃ nanocomposites, respectively. The obtained transparent nanocomposites films were characterized using UV–Vis spectrophotometer which shows the transparencies of nanocomposites are almost maintained in visible region while the intensity of absorption band in ultraviolet (UV) region is increased with CaCO₃ nanoparticles contents and these composites particles could enhance the UV-shielding properties of polymers.     

Novel synthesis of nano‐calcium carbonate (CaCO3)/polystyrene (PS) core–shell nanoparticles by atomized microemulsion technique and its effect on properties of polypropylene (PP) composites

Calcium carbonate (CaCO₃)/polystyrene (PS) nanoparticles (<100 nm) with core–shell structure were synthesized by atomized microemulsion technique. The polymer chains were anchored onto the surface of nano‐CaCO₃ through triethoxyvinyl silane (TEVS) as a coupling agent. Ammonium persulfate (APS), sodium dodecyl sulfate (SDS) and n‐pentanol were used as initiator, surfactant, and cosurfactant, respectively. Polymerization mechanism of core–shell latex particles was discussed. Encapsulation of nano‐CaCO₃ by PS was confirmed by using transmission electron microscope (TEM). Grafting percentage of core–shell particles was investigated by Thermogravimetric Analyzer (TGA). Nano‐CaCO₃/PS core–shell particles were characterized by Fourier transform infrared (FTIR) spectrophotometer and differential scanning calorimeter (DSC). The results of FTIR revealed existence of a strong interaction at the interface of nano‐CaCO₃ particle and PS, which implies that the polymer chains were successfully grafted onto the surface of nano‐CaCO₃ particle through the link of the coupling agent. In addition, TGA and DSC results indicated an enhancement of thermal stability of core–shell materials compared with the pure nano‐PS. Nano‐CaCO₃/PS particles were blended with polypropylene (PP) matrix on Brabender Plastograph by melt process with different wt% of loading (i.e. 0.1–1 wt%). The interfacial adhesion between nano‐CaCO₃ particles and PP matrix was significantly improved when the nano‐CaCO3 particles were grafted with PS, which led to increased thermal, rheological, and mechanical properties of (nano‐CaCO₃/PS)/PP composites. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed a perfect dispersion of the nano‐CaCO₃ particles in PP matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

活性聚苯乙烯膜诱导碳酸钙异相成核结晶

0引言生物矿物材料(如骨、牙齿、贝壳等)的优异性能[1]使得无机材料的仿生合成(又称有机模板合成)成为近年来研究的热点之一[2]。该合成技术的优点是,通过有机物分子与无机离子的相互作用,能够在温和的条件下合成出具有多级结构、特殊形貌和优异性能的有机/无机复合材料。CaCO3     

Functional polymer/inorganic hybrid nanoparticles for macrophage targeting delivery of oligodeoxynucleotides in cancer immunotherapy

To efficiently deliver CpG oligodeoxynucleotides (ODN) in cancer immunotherapy, a multifunctional macrophage targeting delivery system was designed and prepared. Mannosylated carboxymethyl chitosan/protamine sulfate/CaCO₃/ODN (MCMC/PS/CaCO₃/ODN) nanoparticles were prepared using a facile self-assembly method. The functional components, including MCMC to endow the nanoparticles with macrophage targeting ability, PS to improve the ODN loading capacity and enhance the cell uptake, and CaCO₃ to encapsulate ODN and induce the favorable pH sensitivity, were introduced to the delivery systems by self-assembly. Due to the mannose mediated endocytosis and the favorable effects of PS in overcoming delivery barriers, MCMC/PS/CaCO₃/ODN nanoparticles exhibit a much higher ODN delivery efficiency and a significantly enhanced immune stimulation capacity as compared with Lipofectamine 2000/ODN complexes. The regulation of NF-κB activity by our ODN delivery system results in dramatically increased production of proinflammatory cytokines including IL-12, IL-6, and TNF-α in RAW264.7 cells. The significantly increased CD80 expression after stimulation by the ODN delivery systems indicates the successful modulation of the macrophage polarity to the anti-tumor M1 phenotype. The multifunctional macrophage targeting delivery system developed has promising applications in delivery of CpG ODN in cancer immunotherapy.     

Morphology,structure, and properties of in situ compatibilized linear low‐density polyethylene/polystyrene and linear low‐density polyethylene/high‐impact polystyrene blends

Blends of linear low‐density polyethylene (LLDPE) with polystyrene (PS) and blends of LLDPE with high‐impact polystyrene (HIPS) were prepared through a reactive extrusion method. For increased compatibility of the two blending components, a Lewis acid catalyst, aluminum chloride (AlCl₃), was adopted to initiate the Friedel–Crafts alkylation reaction between the blending components. Spectra data from Raman spectra of the LLDPE/PS/AlCl₃ blends extracted with tetrahydrofuran verified that LLDPE segments were grafted to the para position of the benzene rings of PS, and this confirmed the graft structure of the Friedel–Crafts reaction between the polyolefin and PS. Because the in situ generated LLDPE‐g‐PS and LLDPE‐g‐HIPS copolymers acted as compatibilizers in the relative blending systems, the mechanical properties of the LLDPE/PS and LLDPE/HIPS blending systems were greatly improved. For example, after compatibilization, the Izod impact strength of an LLDPE/PS blend (80/20 w/w) was increased from 88.5 to 401.6 J/m, and its elongation at break increased from 370 to 790%. For an LLDPE/HIPS (60/40 w/w) blend, its Charpy impact strength was increased from 284.2 to 495.8 kJ/m². Scanning electron microscopy micrographs showed that the size of the domains decreased from 4–5 to less than 1 μm, depending on the content of added AlCl₃. The crystallization behavior of the LLDPE/PS blend was investigated with differential scanning calorimetry. Fractionated crystallization phenomena were noticed because of the reduction in the size of the LLDPE droplets. The melt‐flow rate of the blending system depended on the competition of the grafting reaction of LLDPE with PS and the degradation of the blending components. The degradation of PS only happened during the alkylation reaction between LLDPE and PS. Gel permeation chromatography showed that the alkylation reaction increased the molecular weight of the blend polymer. The low molecular weight part disappeared with reactive blending. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1837–1849, 2003     

One‐pot synthesis of star‐block copolymers using double click reactions

3‐Arm star‐block copolymers, (polystyrene‐b‐poly(methyl methacrylate))₃, (PS‐b‐PMMA)₃, and (polystyrene‐b‐poly(ethylene glycol))₃, (PS‐b‐PEG)₃, are prepared using double‐click reactions: Huisgen and Diels–Alder, with a one‐pot technique. PS and PMMA blocks with α‐anthracene‐ω‐azide‐ and α‐maleimide‐end‐groups, respectively, are achieved using suitable initiators in ATRP of styrene and MMA, respectively. However, PEG obtained from a commercial source is reacted with 3‐acetyl‐N‐(2‐hydroxyethyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide (7) to give furan‐protected maleimide‐end‐functionalized PEG. Finally, PS/PMMA and PS/PEG blocks are linked efficiently with trialkyne functional linking agent 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane 2 in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) at 120 °C for 48 h to give two samples of 3‐arm star‐block copolymers. The results of the peak splitting using a Gaussian deconvolution of the obtained GPC traces for (PS‐b‐PMMA)₃ and (PS‐b‐PEG)₃ displayed that the yields of target 3‐arm star‐block copolymers were found to be 88 and 82%, respectively. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7091–7100, 2008     

Block copolymer compatibilizers for polystyrene/poly(dimethylsiloxane) blends

Symmetric polystyrene (PS)–poly(dimethylsiloxane) (PDMS) diblock copolymers were mixed into a 20% dispersion of PDMS in PS. The effect of adding the block copolymer on the blend morphology was examined as a function of the block copolymer molecular weight (M_n,bcp), concentration, and viscosity ratio (η_r). When blended together with the PS and PDMS homopolymers, most of the block copolymer appeared as micelles in the PS matrix. Even when the copolymer was preblended into the PDMS dispersed phase, block copolymer micelles in the PS matrix phase were observed with transmission electron microscopy after mixing. Adding 16 kg/mol PS–PDMS block copolymer dramatically reduced the PDMS particle size, but the morphology, as examined by scanning electron microscopy, was unstable upon thermal annealing. Adding 156 kg/mol block copolymer yielded particle sizes similar to those of blends with 40 or 83 kg/mol block copolymers, but only blends with 83 kg/mol block copolymer were stable after annealing. For a given value of M_n,bcp, a minimum PDMS particle size was observed when η_r ～ 1. When η_r = 2.6, thermally stable, submicrometer particles as small as 0.6 μm were observed after the addition of only 3% PS–PDMS diblock (number‐average molecular weight = 83 kg/mol) to the blend. As little as 1% 83 kg/mol block copolymer was sufficient to stabilize a 20% dispersion of 1.1‐μm PDMS particles in PS. Droplet size reduction was attributed to the prevention of coalescence caused by small amounts of block copolymer at the interface. The conditions under which block copolymer interfacial adsorption and interpenetration were facilitated were explained with Leibler's brush theory. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 346–357, 2002; DOI 10.1002/polb.10098     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007     

Facile method to prepare monodispersed Ag/polystyrene composite microspheres and their properties

This article presents a facile method to prepare silver/polystyrene composite microspheres. In this approach, monodispersed polystyrene (PS) particles were synthesized with carboxyl acid groups on the surfaces of the PS particles via dispersion polymerization at first. With the addition of [Ag(NH₃)₂]⁺ to the PS dispersion, [Ag(NH₃)₂]⁺ was absorbed to the surfaces of the PS particles, and then by heating the system, [Ag(NH₃)₂]⁺ complex ions were reduced to silver to form the Ag/PS composite microspheres. In the synthesis of PS dispersion, PVP was used as dispersant to stabilize the PS particles, it also acted as reducing agent in the reduction of [Ag(NH₃)₂]⁺ complex ions to silver, so no additional reducing agent was needed. The resulting composite microspheres were characterized by TEM, SEM, XPS, and XRD. The catalytic properties and surface‐enhance Raman scattering (SERS) was studied as well. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4547–4554, 2009     

Synthesis and morphology of Fe3O4/polystyrene/poly(isopropylacrylamide‐co‐methyl acrylate acid) magnetic composite latex – 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride as initiator

In this work, Fe₃O₄/polystyrene/poly(N‐isopropylacryl amide‐co‐methylacrylate acid) (Fe₃O₄/PS/P(NIPAAM‐co‐MAA)) magnetic composite latex was synthesized by the method of two stage emulsion polymerization. In this reaction system, 2,2′‐azobis(2‐methyl propionamidine) dihydrochloride (AIBA) was used as initiator to initiate the first stage reaction and second stage reaction. The Fe₃O₄ particles were prepared by a traditional coprecipitation method. Fe₃O₄ particles were surface treated by either PAA oligomer or lauric acid to form the stable ferrofluid. The first stage for the synthesis of magnetic composite latex was to synthesize PS in the presence of ferrofluid by soapless emulsion polymerization to form the Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out by the method of soapless emulsion polymerization with NIPAAM and MAA as monomers and Fe₃O₄/PS latex as seeds. The magnetic composite particles, Fe₃O₄/PS/P(NIPAAM‐co‐MAA), were thus obtained. The mechanism of the first stage reaction and second stage reaction were investigated. Moreover, the effects of PAA and lauric acid on the reaction kinetics, morphology, and particle size distribution were studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3912–3921, 2007     

Effect of polystyrene‐b‐poly(ethylene oxide) on self‐assembly of polystyrene‐b‐poly(N‐isopropylacrylamide) in aqueous solution

Mixed micelles of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) and two polystyrene‐b‐poly(ethylene oxide) diblock copolymers (PS‐b‐PEO) with different chain lengths of polystyrene in aqueous solution were prepared by adding the tetrahydrofuran solutions dropwise into an excess of water. The formation and stabilization of the resultant mixed micelles were characterized by using a combination of static and dynamic light scattering. Increasing the initial concentration of PS‐b‐PEO in THF led to a decrease in the size and the weight average molar mass (〈M_w〉) of the mixed micelles when the initial concentration of PS‐b‐ PNIPAM was kept as 1 × 10^?3 g/mL. The PS‐b‐PEO with shorter PS block has a more pronounced effect on the change of the size and 〈M_w〉 than that with longer PS block. The number of PS‐b‐PNIPAM in each mixed micelle decreased with the addition of PS‐b‐PEO. The average hydrodynamic radius 〈R_h〉 and average radius of gyration 〈R_g〉 of pure PS‐b‐PNIPAM and mixed micelles gradually decreased with the increase in the temperature. Both the pure micelles and mixed micelles were stable in the temperature range of 18 °C–39 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1168–1174, 2010     

Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility

A series of polypropylene (PP)/polystyrene (PS) blends were prepared by solvent blending with PS‐grafted PP copolymers (PP‐g‐PS) having different PS graft chain length as compatibilizers. The interfacial compatibility was significantly improved with increasing PS graft chain length until the interface was saturated at PS graft chain length being 3.29 × 10³ g/mol. The blends were foamed by using pressure‐quenching process and supercritical CO₂ as the blowing agent. The cell preferentially formed at compatibilized interface because of low energy barrier for nucleation. Combining with the increased interfacial area, the compatibilized interface lead to the foams with increased cell density compared to the uncompatibilized one. The increase in interfacial compatibility also decreased the escape of gas, held more gas for cell growth, and facilitated the increase in expansion ratio of PP/PS blend foams. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1641–1651, 2008     

Solubility of polystyrene in selectively deuterated methyl acetate

Cloud point measurements were made for binary systems of polystyrene (PS) + methyl acetate (MA) and polystyrene (PS) + selectively deuterated MA: CD₃COOCH₃ and CH₃COOCD₃ with three PS samples of M_w = 4.0 × 10⁵, 2.0 × 10⁶, and 13.2 × 10⁶. All systems are characterized by the phase diagrams with upper and lower critical temperature. H/D isotope effects on miscibility for both selectively deuterated acetates are very large and appeared to be independent of the site of deuterium substitution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47:2140–2143, 2009     

Degradation and thermal properties of in situ compatibilized PS/POE blends

This paper reported the degradation behaviors and thermal properties of polystyrene (PS)/polyolefin elastomer (POE) blends with AlCl₃ as the catalyst of Friedel-Crafts alkylation reaction. Gel permeation chromatography (GPC) and thermogravimetric analysis (TGA) were adopted to reveal the effects of in situ grafting reaction and degradation of blending compounds on the thermal properties of PS/POE blends. It was found that the changes in both catalyst content and blend composition influenced the competition between in situ grafting reaction and degradation, resulting in the complexity of the thermal properties of PS/POE/AlCl₃ blends.     

THE EFFECT OF MATRIX TOUGHNESS ON THE BRITTLE-DUCTILE TRANSITION OF HDPE/CaCO_3 BLENDS

The effects of HDPE matrix toughness on the brittle-ductile transition of HDPE/CaCO_3blends are investigated. Not all HDPE can be toughened by CaCO_3 particles. The ability of thematrix to yield plays a fundamental role in determing whether HDPE can be toughened or not.There exists a critical matrix toughness (I_(sc)≈45J/m) below which HDPE can not be toughenedobservably by CaCO_3 particle at given average size, and above which the critical matrix ligamentthickness (τ_?) is proportional to matrix impact strength.     

Glass transition of polymer/single-walled carbon nanotube composite films

The glass-transition temperatures (T_g's) of nanocomposites of polystyrene (PS) and single-walled carbon nanotubes were measured in the bulk and in thin films with differential scanning calorimetry and spectroscopic ellipsometry, respectively. The bulk T_g of the nanocomposites increased by approximately 3 °C and became much broader than that of PS. For the nanocomposite films thinner than 45 nm, T_g decreased with decreasing film thickness [i.e., ΔT_g(nano) < 0]. This phenomenon also occurred in thin PS films, the magnitude of the depression in PS [ΔT_g(PS)] being somewhat larger. The film thickness dependence and the differences in the magnitude of ΔT_g in the two systems were examined in light of current theory, and a quantitative comparison was made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3339–3345, 2003     

Synthesis of a novel graft-like copolymer of syndiotactic polystyrene with polybutadiene

A novel graft-like copolymer of syndiotactic polystyrene (sPS) with polybutadiene (PB) was synthesized by polymerization of styrene in a toluene solution of PB using the cyclopentadiene titanium trichloride (CpTiCl₃)/methylaluminoxane (MAO) catalytic system. The effect of PB on the crystallization behavior of the copolymer was investigated by differential scanning calorimetry and wide angle X-ray diffraction. Hydrogenation of the sPS/PB copolymer with p-toluenesulfonyl hydrazide afforded a PE-like copolymer.     

Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

Stereospecific sequential block copolymerizations of styrene and 1,3‐butadiene with a C5Me5TiMe3/B(C6F5)3/Al(oct)3 catalyst

This article reports a new methodology for preparing highly stereoregular styrene (ST)/1,3‐butadiene (BD) block copolymers, composed of syndiotactic polystyrene (syn‐PS) segments chemically bonded with cis‐polybutadiene (cis‐PB) segments, through a stereospecific sequential block copolymerization of ST with BD in the presence of a C₅Me₅TiMe₃/B(C₆F₅)₃/Al(oct)₃ catalyst. The first polymerization step, conducted in toluene at ?25 °C, was attributed to the syndiospecific living polymerization of ST. The second step, conducted at ?40 °C, was attributed to the cis‐specific living polymerization of BD. The livingness of the whole polymerization system was confirmed through a linear increase in the weight‐average molecular weights of the copolymers versus the polymer yields in both steps, whereas the molar mass distributions remained constant. The profound cross reactivity of the styrenic‐end‐group active species with BD toward ST led to the production of syn‐PS‐b‐cis‐PB copolymers with extremely high block efficiencies. Because of the presence of crystallizable syn‐PS segments, this copolymer exhibited high melting temperatures (up to 270 °C), which were remarkably different from those of the corresponding anionic ST–BD copolymers, for which no melting temperatures were observed. Scanning electron microscopy pictures of a binary syn‐PS/cis‐PB blend with or without the addition of the syn‐PS‐b‐cis‐PB copolymers proved that it could be used as an effective compatibilizer for noncompatibilized syn‐PS/cis‐PB binary blends. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1188–1195, 2005