Solvation dynamics in ionic liquid swollen p123 triblock copolymer micelle: a femtosecond excitation wavelength dependence study

Femtosecond solvation dynamics of coumarin 480 (C480) in a mixed micelle is reported. The mixed micelle consists of a triblock copolymer (PEO)20-(PPO) 70-(PEO)20 (Pluronic P123) and an ionic liquid (IL), 1-pentyl-3-methylimidazolium tetrafluoroborate ([pmim][BF4]). At a low concentration (0.3 M), the sparingly water soluble IL ([pmim][BF4]) penetrates the hydrophobic PPO core of the P123 micelles. Thus emission maximum of C480 in the core (accessed at lambdaex=375 nm) in 0.3 M IL is red-shifted by 8 nm from that in its absence and the red edge excitation shift (REES) is large (19+/-1 nm). At a high concentration (0.9 M), the ionic liquid [pmim][BF4] invades both the core and corona region and the mixed micelle exhibits very small REES (3+/-1 nm). Anisotropy decay and solvation dynamics in different regions of the mixed micelle are studied by variation of excitation wavelength (lambda ex). In P123 micelle, the average rotational time () is 2800 ps in the core (at lambdaex=375 nm) and 1350 ps in the corona region (at lambdaex=435 nm). In 0.3 M [pmim][BF4], tau rot at the core of the mixed micelle decreases to 1950 ps while that in the corona remains unaffected. In 0.9 M IL, both the core and corona (lambda ex=375 and 435 nm) exhibit similar and short approximately 600 ps. In 0.3 M IL, solvation dynamics in the core region (lambdaex=375 nm) of P123 micelle is about 2 times faster than in its absence. In 0.3 M IL, solvation dynamics in the corona region (lambdaex=435 nm) is approximately 100 times faster than that in the core. In 0.9 M IL, the solvation dynamics in the core and in the corona is, respectively, approximately 9 times and 4 times faster than that in 0.3 M IL.     

Ultrafast photoinduced electron transfer in the micelle and the gel phase of a PEO-PPO-PEO triblock copolymer

Ultrafast photoinduced electron transfer (PET) from N,N-dimethylaniline (DMA) to coumarin dyes is studied in the micelle and the gel phase of a triblock copolymer, (PEO)(20)-(PPO)(70)-(PEO)(20) (Pluronic P123) by picosecond and femtosecond emission spectroscopies. The rate of PET in a P123 micelle and gel is found to be nonexponential and faster than the slow components of solvation dynamics. In a P123 micelle and gel, PET occurs on multiple time scales ranging from a subpicosecond time scale to a few nanoseconds. In the gel phase, the highest rate constant (9.3 x 10(9) M(-1) s(-1)) of ET for C152 is about two times higher than that (3.8 x 10(9) M(-1) s(-1)) observed in micelle phase. The ultrafast components of electron transfer (ET) exhibits a bell shaped dependence with the free energy change which is similar to the Marcus inversion. Possible reasons for slower PET in P123 micelle compared to other micelles and relative to P123 gel are discussed.     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Effect of ionic liquid on diffusion in P123 gel: fluorescence correlation spectroscopy

The effect of two room-temperature ionic liquids (RTILs) on the diffusion of three fluorescent dyes in the gel phase of a triblock copolymer, (PEO)(20)-(PPO)(70)-(PEO)(20) [Pluronic P123; poly ethylene oxide (PEO), poly propylene oxide (PPO)], was studied by using fluorescence correlation spectroscopy (FCS). We used three dyes, 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM), coumarin 480 (C480), and coumarin 343 (C343). By field-emission scanning electron microscopy (FESEM), it was observed that the macroscopic structure of the P123 gel remained unaffected upon addition of RTIL. In the absence of RTIL, the diffusion coefficient (D(t)) of the hydrophobic dye DCM (1 μm(2) s(-1) at the core) is smaller than that of the other two hydrophilic dyes (7 μm(2) s(-1) for C480 and C343). On addition of RTIL, the D(t) values of all of the dyes increase, indicating a decrease in local viscosity (η(eff)). The η(eff) of the core of the RTIL-P123 gel estimated from the D(t) of DCM is lower than that of both the P123 gel (at the core η=90 cP) and RTIL (η=110 cP). It is shown that the RTIL affects the structure of the gel by modifying the size of the micellar aggregates and by penetrating the core.     

Core-corona structure of cubic silsesquioxane-poly(ethylene oxide) in aqueous solution: fluorescence, light scattering, and TEM studies

Well-defined amphiphilic cubic silsesquioxane-poly(ethylene oxide) (CSSQ-PEO) was prepared from octakis (dimethylsiloxy)octasilsesquioxane (Q8M8(H)) and allyl-PEO through a hydrosilylation reaction. The structure of CSSQ-PEO was characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). The amphiphilic properties and aggregation process of CSSQ-PEO in aqueous solution were investigated by fluorescence, dynamic and static light scattering (DLS and SLS), and transmission electron microscopy (TEM). The critical aggregation concentration (CAC) determined by fluorescence measurements was found to be 0.28 mg/mL. Combinations of DLS, SLS, and TEM studies showed the existence of core-corona micelle with hydrophobic CSSQ as the core and hydrophilic PEO as the corona in aqueous solution. The observation of two size distribution peaks from DLS measurements revealed the coexistence of small amounts of unassociated unimolecular micelles (approximately 10% of the scattered intensity) together with micellar aggregates when the CSSQ-PEO concentration was < or = 2 mg/mL. The hydrodynamic radii (R(h)) of unassociated unimolecular micelle and micellar aggregates were found to be 26 and 79 nm, respectively. A large R(g)/R(h) ratio (1.46) and the extremely small value of average chain density (4 x 10(-4) g/cm3) indicate the small hydrophobic CSSQ core was surrounded by the extended PEO coronae. The aggregation number (N(agg)) of CSSQ-PEO in aqueous solution was found to be 38 +/- 2 from SLS and 31-40 from TEM, respectively. The long PEO segments act as a spacer between the spherical aggregates, which facilitate the formation of a network-like structure at high concentration.     

Mixed micelle formation with hydrophobic and hydrophilic Pluronic block copolymers: implications for controlled and targeted drug delivery

Pluronic block copolymers offer affluent phase behavioral characteristics and are extensively investigated for drug delivery applications. Hydrophobic Pluronics produce larger aggregates whereas hydrophilic Pluronics often generate small-sized micelles in aqueous milieu. To overcome the limitations and combine the advantages of different kinds of Pluronics the mixing of such two types of Pluronics is studied here, especially for hydrophobic Pluronic L81 and relatively hydrophilic Pluronic P123. Critical micelle concentration (CMC) of the developed binary mixtures was 0.032 mg/ml as evidenced from pyrene fluorescence spectroscopy and is located in between that of the individual Pluronics. Dynamic light scattering (DLS) showed very small particle sizes (～20 nm) and low polydispersity indices for most of the mixed micelles. Transmission electron microscopy (TEM) demonstrated spherical shape of micelles. Based upon the ratio of hydrophobic and hydrophilic Pluronics, dispersions of varied stability were obtained. With 0.1/1.0 wt.% and 0.5/3.0 wt.% of Pluronic L81/P123, stable dispersions were obtained. Stability was assessed from turbidity measurement, size analysis and clarity of dispersion on standing. Micelles were also found to be stable in bovine serum albumin (BSA) solution. Mixed micelles showed fairly high entrapment efficiency, loading capacity and sustained release profile for aceclofenac (Acl), a model hydrophobe. Presence of salt lowered Acl solubilization in micelles. Thermodynamic parameters for Acl solubilization in mixed micelles revealed high partition coefficient values and spontaneity of drug solubilization. Thus, the developed novel mixed micelles hold promise in controlled and targeted drug delivery owing to their very small size, high entrapment efficiency and stability.     

Thermosensitive pluronic micelles stabilized by shell cross-linking with gold nanoparticles

Gold nanoparticles were employed to prepare shell cross-linked Pluronic micelles that exhibit a reversibly thermosensitive swelling/shrinking behavior. Two terminal hydroxyl groups of Pluronic F127 were thiol-functionalized to form self-assembling Pluronic micelles in aqueous solution with exposed -SH groups in an outer shell layer. The thiol groups present in the outer shell were cross-linked by gold nanoparticles synthesized through NaBH4 reduction of gold precursor anions. The resultant shell cross-linked gold-Pluronic micelles exhibited a temperature-dependent volume transition: their hydrodynamic diameter was changed from 157.1 +/- 15.6 nm at 15 degrees C to 53.4 +/- 5.5 nm at 37 degrees C as determined by dynamic light scattering. The critical micelle temperature measured by a pyrene solubilization technique suggested that the reversible swelling/shrinking behavior of the micelles was caused by hydrophobic interactions of cross-linked or grafted Pluronic copolymer chains in the micelle structure with increasing temperature. Transmission electron microscopy directly revealed that the shell cross-linked micelles were indeed produced by gold nanoparticles covalently clustered on the surface. These novel self-assembled organic/inorganic hybrid micelles would hold great potential for diagnostic and therapeutic applications.     

Micellization and gelation of mixed copolymers P123 and F127 in aqueous solution

The micellization in dilute aqueous solution of Pluronic copolymers P123 (E21P67E21) and F127 (E98P67E98) and mixtures of the two was investigated using static and dynamic light scattering. Gelation of concentrated solutions of the two copolymers and their mixtures was studied using tube inversion and oscillatory rheometry. The two copolymers comicellized to give micelles with narrow size distributions. Clouding temperatures and critical micelle temperatures decreased as the proportion of P123 in the mixture was increased. Micelle association numbers of the mixed micelles lay between the values found for micelles of P123 and F127 alone, whereas micelle radii passed through maximum values in the range 0-50 wt % P123. As judged by the ratio of the thermodynamic to the hydrodynamic radius, the micelle interaction potential changes gradually from soft to hard as the proportion of P123 in the mixture is increased. Regions of cubic and hexagonal (birefringent) gel were defined for concentrated solutions. The high-temperature boundary of the 30 wt % cubic gel decreased monotonically from 90 to 43 degrees C as the proportion of P123 in the mixture was increased from 0 to 100 wt %, whereas the low-temperature boundary was essentially constant at 15 +/- 3 degrees C. Increasing the proportion of P123 in the mixture at 25 degrees C increased the concentration at which the cubic gel was first formed and decreased the concentration at which the hexagonal gel was first formed.     

Small-angle X-ray scattering, light scattering, and NMR study of PEO-PPO-PEO triblock copolymer/cationic surfactant complexes in aqueous solution

The formation of triblock copolymer/surfactant complexes upon mixing a nonionic Pluronic polymer (PEO-PPO-PEO) with a cationic surfactant, hexadecyltrimethylammonium chloride (CTAC), has been studied in dilute aqueous solutions using small-angle X-ray scattering, static and dynamic light scattering, and self-diffusion NMR. The studied copolymer (denoted P123, EO(20)PO(68)EO(20)) forms micelles with a radius of 10 nm and a molecular weight of 7.5 x 10(5), composed of a hydrophobic PPO-rich core of radius 4 nm and a water swollen PEO corona. The P123/CTAC system has been investigated between 1 and 5 wt % P123 and with varying surfactant concentration up to approximately 170 mM CTAC (or a molar ratio n(CTAC)/n(P123) = 19.3). When CTAC is mixed with micellar P123 solutions, two different types of complexes are observed at various CTAC concentrations. At low molar ratios (>/=0.5) a "P123 micelle-CTAC" complex is obtained as the CTAC monomers associate noncooperatively with the P123 micelle, forming a spherical complex. Here, an increased interaction between the complexes with increasing CTAC concentration is observed. The interaction has been investigated by determining the structure factor obtained by using the generalized indirect Fourier transformation (GIFT) method. The interaction between the P123 micelle-CTAC complexes was modeled using the Percus-Yevick closure. For the low molar ratios a small decrease in the apparent molecular weight of the complex was obtained, whereas the major effect was the increase in electrostatic repulsion between the complexes. Between molar ratios 1.9 and 9 two coexisting complexes were found, one P123 micelle-CTAC complex and one "CTAC-P123" complex. The latter one consists of one or a few P123 unimers and a few CTAC monomers. As the CTAC concentration increases above a molar ratio of 9, the P123 micelles are broken up and only the CTAC-P123 complex that is slightly smaller than a CTAC micelle exists. The interaction between the P123/CTAC complexes was modeled with the hypernetted-chain closure using a Yukawa type potential in the GIFT analysis, due to the stronger electrostatic repulsion.     

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self‐aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P‐123 and F‐127 by two methodologies: direct addition and the thin‐film solid dispersion methods. The thin‐film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self‐assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P‐123, which ensures their potential as drug for clinical photodynamic applications.     

Reversible controlled assembly of thermosensitive polymer-coated gold nanoparticles

Aggregation of thermosensitive polymer-coated gold nanoparticles was performed in aqueous solution in the presence of a triblock copolymer poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic P123, PEO(20)-PPO(68)-PEO(20)). The gold nanoparticles, AuNPs, which are covered by thermosensitive statistical copolymers poly(EO(x)-st-PO(y)), aggregate when the temperature is higher than the phase transition temperature of the polymer, leading to a macroscopic precipitation. The presence of Pluronic chains in solution prevents the uncontrolled aggregation of the AuNPs at higher temperature than both the aggregation temperature of the AuNPs (T(agg)) and the critical micellization temperature (cmt) of the Pluronic. The size, the colloidal stability, and the optical properties of the AuNPs aggregates are modulated as a function of the P123-to-AuNP ratio, which constitutes the critical parameter of the system. Moreover, the AuNP aggregation is totally reversible upon decreasing the temperature below T(agg). Our approach constitutes an easy way to the formation of well-controlled nanoparticle aggregates with well-defined sizes. The resulting aggregates have been characterized by UV-vis spectroscopy, dynamic light scattering, and electron microscopy.     

Dynamic and static light scattering studies on self-aggregation behavior of biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers in aqueous solution

The self-aggregation behavior of two amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer samples with nearly identical PHB block lengths but different PEO block lengths, PEO-PHB-PEO(2000-810-2000) and PEO-PHB-PEO(5000-780-5000), was studied with dynamic and static light scattering (DLS and SLS), in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). The formation of polymeric micelles by the two PEO-PHB-PEO triblock copolymers was confirmed with fluorescence technique and TEM. DLS analysis showed that the hydrodynamic radius (R(h)) of the monodistributed polymeric micelles increased with an increase in PEO block length. The relative thermostability of the triblock copolymer micelles was studied by SLS and DLS at different temperatures. The aggregation number and the ratio of the radius of gyration over hydrodynamic radius were found to be independent of temperature, probably due to the strong hydrophobicity of the PHB block. The combination of DLS and SLS studies indicated that the polymeric micelles were composed of a densely packed core of hydrophobic PHB blocks and a corona shell formed by hydrophilic PEO blocks. The aggregation numbers were found to be approximately 53 for PEO-PHB-PEO(2000-810-2000) micelles and approximately 37 for PEO-PHB-PEO(5000-780-5000) micelles. The morphology of PEO-PHB-PEO spherical micelles determined by DLS and SLS measurements was further confirmed by TEM.     

Effect of acid on the aggregation of poly(ethylene xide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers

The acid effect on the aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers EO(20)PO(70)EO(20) has been investigated by transmission electron microscopy (TEM), particle size analyzer (PSA), Fourier transformed infrared, and fluorescence spectroscopy. The critical micellization temperature for Pluronic P123 in different HCl aqueous solutions increases with the increase of acid concentration. Additionally, the hydrolysis degradation of PEO blocks is observed in strong acid concentrations at higher temperatures. When the acid concentration is low, TEM and PSA show the increase of the micelle mean diameter and the decrease of the micelle polydispersity at room temperature, which demonstrate the extension of EO corona and tendency of uniform micelle size because of the charge repulsion. When under strong acid conditions, the aggregation of micelles through the protonated water bridges was observed.     

Effects of block size of pluronic polymers on the water structure in the corona region and its effect on the electron transfer reactions

Effects of constituent block size of triblock copolymers on the nature of the water molecules in the corona region of their micelles have been investigated using time-resolved fluorescence measurements. The physical nature of the water molecules in the micellar corona region of the block copolymer, Pluronic F88 ([ethylene oxide (EO)]103-[propylene oxide (PO)]39-EO103), has been studied using a solubilized coumarin dye. Solvent reorientation time and rotational correlation time have been measured and compared with another block copolymer, Pluronic P123 (EO20-PO70-EO20), which has a different composition of the constituent PO and EO blocks. It is noted that due to the presence of larger number of EO blocks in F88 as compared with P123, the corona region of the former micelle is more hydrated than that of the latter. The solvent reorientation time and rotational correlation time are found to be relatively shorter for F88 as compared with P123. This indicates that the water molecules in the corona of the F88 micelle are more labile than those of P123, which is also supported from the estimated number of water molecules associated with each EO unit, measured from the size of each type of micelle and its aggregation number. To understand the effect of block size on the chemical reactions in these microheterogeneous media, electron transfer reactions have been carried out between different coumarin acceptors and N, N-dimethylaniline donor. The electron transfer results obtained in F88 micelles have been compared with those obtained in P123, and the results are rationalized on the basis of the relative hydration of the two triblock copolymer micelles.     

Effect of ionic liquids on the aggregation behavior of PEO-PPO-PEO block copolymers in aqueous solution

Effect of 1-butyl-3-methyl-imidazolium bromide (BmimBr) on the aggregation behavior of PEO-PPO-PEO Pluronic P104 aqueous solution was studied by Fourier transform infrared (FTIR) spectroscopy, freeze fracture transmission electron microscopy (FF-TEM), dynamic light scattering (DLS), and NMR spectroscopy. When the BmimBr concentration was below 1.232 mol/L, the critical micelle temperature (CMT) of Pluronic P104 remained constant, while the size of micelles increased with increasing the BmimBr concentration; above this concentration, the CMT of Pluronic P104 decreased abruptly, and bigger clusters of BmimBr were formed. The selective nuclear Overhauser effect (NOE) spectrum indicates that the PO block of the P104 interacts with the butyl group of the Bmim+ cation by hydrophobic interaction. It suggests that when the concentration of BmimBr is below 1.232 mol/L, there are P104 micelles in the aqueous solution with BmimBr embedding to the micellar core, while above this concentration, P104 micelles and BmimBr clusters coexist in the system.     

Thermosensitive sol–gel transition behaviors of poly(ethylene oxide)/aliphatic polyester/poly(ethylene oxide) aqueous solutions

The thermoreversible gelation of Pluronic [poly(ethylene oxide) (PEO)–polypropylene oxide (PPO)–PEO] aqueous solutions originates from micelle formation and micelle volume changes due to PEO–water and PPO–water lower critical solution temperature behavior. The micelle volume fraction is known to dominate the sol–gel transition behavior of Pluronic aqueous solutions. Triblock copolymers of PEO and aliphatic polyesters, instead of PPO, were prepared by hexamethylene diisocyanate coupling and dicyclohexyl carbodiimide coupling. Through changes in the molecular weight and hydrophobicity of the polyester middle block, the hydrophobic–hydrophilic balance of each block was systematically controlled. The following aliphatic polyesters were used: poly(hexamethylene adipate) (PHA), poly(ethylene adipate) (PEA), and poly(ethylene succinate) (PESc). With the hydrophobicity and molecular weight of the middle block increasing, the critical micelle concentration at the same critical micelle temperature decreased, and the absolute value of the micellization free energy increased. The micelle size was rather insensitive to temperature but slightly decreased with increasing temperature. PEO–PHA–PEO and PEO–PEA–PEO triblock copolymers needed high polymer concentrations to form gels. This was ascribed to the tight aggregation of PHA and PEA chains in the micelle core due to strong hydrophobic interactions, which induced the contraction of the micelle core. However, because of the relatively hydrophilic core, a PEO–PESc–PEO aqueous solution showed gelation at a low polymer concentration. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 772–784, 2004     

Dopant-Mediated Interactions in a Lecithin Lamellar Phase

Interactions induced by dopants in a lamellar phase constructed from the lecithin and water are analyzed by the small angle x-ray scattering (SAXS) technique. From SAXS patterns, scattering peak or curve shape changes disclose information on phase structure as well as the interactions between dopant and host matrices. At a certain concentration, two amphiphilic tri-block copolymers (Pluronic P123 and F127) as dopants squeeze themselves into the lecithin bilayers with PPO hydrophobic blocks and produce various effects on the lamellar phase depending on the length of PEO hydrophilic groups. Coexistence of two different lamellar phases is observed in P123-doped systems.     

Thermodynamics of temperature-sensitive polyether-modified poly(acrylic acid) microgels

The temperature-induced structural changes and thermodynamics of ionic microgels based on poly(acrylic acid) (PAA) networks bonded with poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) (Pluronic) copolymers have been studied by small-angle neutron scattering (SANS), ultra-small-angle neutron scattering (USANS), differential scanning calorimetry (DSC), and equilibrium swelling techniques. Aggregation within microgels based on PAA and either the hydrophobic Pluronic L92 (average composition, EO8PO52EO8; PPO content, 80%) or the hydrophilic Pluronic F127 (average composition, EO99PO67EO99; PPO content, 30%) was studied and compared to that in the solutions of the parent Pluronic. The neutron scattering results indicate the formation of micelle-like aggregates within the F127-based microgel particles, while the L92-based microgels formed fractal structures of dense nanoparticles. The microgels exhibit thermodynamically favorable volume phase transitions within certain temperature ranges due to reversible aggregation of the PPO chains, which occurs because of hydrophobic associations. The values of the apparent standard enthalpy of aggregation in the microgel suspensions indicate aggregation of hydrophobic clusters that are more hydrophobic than the un-cross-linked PPO chains in the Pluronic. Differences in the PPO content in Pluronics L92 and F127 result in a higher hydrophobicity of the resulting L92-PAA-EGDMAmicrogels and a larger presence of hydrophobic, densely cross-linked clusters that aggregate into supramolecular structures rather than micelle-like aggregates such as those formed in the F127-PAA-EGDMA microgels.     

The effect of pharmaceuticals on the nanoscale structure of PEO-PPO-PEO micelles

We present results on the effects of various hydrophobic drugs and additives on the micellar structure of Pluronic F127 solutions. Small-angle neutron scattering experiments on 5wt% F127 solutions were used to measure micelle core size (R(1)), micelle corona size (R(2)), intermicellar interaction distance (R(int)), polydispersity (sigma), and aggregation number (N(agg)); dynamic light scattering was used to measure critical micelle concentration (CMC); and ultraviolet spectroscopy was used to measure drug solubility and apparent micelle-water partition coefficient (K(mw)). The core and corona size were found to generally increase in the presence of the drugs, as did R(int). Both sigma and N(agg) were found to decrease in the presence of most of the drugs, and the CMC was found to vary considerably with no clear correlation. A design of experiments (DOE) approach was used to analyze the results and build empirical correlations. All of the parameters from the SANS experiments were found to depend strongly on drug solubility, with a weak dependence on K(mw) in most cases. The aggregation number, however, was found to depend strongly on both K(mw) and solubility. The correlations can be used to roughly predict the structural parameters of F127 micelles for other hydrophobic drugs.     

Phase behavior,crystallization, and nanostructures in thermoset blends of epoxy resin and amphiphilic star‐shaped block copolymers

This article reports thermoset blends of bisphenol A‐type epoxy resin (ER) and two amphiphilic four‐arm star‐shaped diblock copolymers based on hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly(propylene oxide) (PPO). 4,4′‐Methylenedianiline (MDA) was used as a curing agent. The first star‐shaped diblock copolymer with 70 wt % ethylene oxide (EO), denoted as (PPO‐PEO)₄, consists of four PPO‐PEO diblock arms with PPO blocks attached on an ethylenediamine core; the second one with 40 wt % EO, denoted as (PEO‐PPO)₄, contains four PEO‐PPO diblock arms with PEO blocks attached on an ethylenediamine core. The phase behavior, crystallization, and nanoscale structures were investigated by differential scanning calorimetry, transmission electron microscopy, and small‐angle X‐ray scattering. It was found that the MDA‐cured ER/(PPO‐PEO)₄ blends are not macroscopically phase‐separated over the entire blend composition range. There exist, however, two microphases in the ER/(PPO‐PEO)₄ blends. The PPO blocks form a separated microphase, whereas the ER and the PEO blocks, which are miscible, form another microphase. The ER/(PPO‐PEO)₄ blends show composition‐dependent nanostructures on the order of 10?30 nm. The 80/20 ER/(PPO‐PEO)₄ blend displays spherical PPO micelles uniformly dispersed in a continuous ER‐rich matrix. The 60/40 ER/(PPO‐PEO)₄ blend displays a combined morphology of worm‐like micelles and spherical micelles with characteristic of a bicontinuous microphase structure. Macroscopic phase separation took place in the MDA‐cured ER/(PEO‐PPO)₄ blends. The MDA‐cured ER/(PEO‐PPO)₄ blends with (PEO‐PPO)₄ content up to 50 wt % exhibit phase‐separated structures on the order of 0.5–1 μm. This can be considered to be due to the different EO content and block sequence of the (PEO‐PPO)₄ copolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 975–985, 2006