Influence of Cyclopentadienyl Ring‐Tilt on Electron‐Transfer Reactions: Redox‐Induced Reactivity of Strained [2] and [3]Ruthenocenophanes

In contrast to ruthenocene [Ru(η⁵‐C₅H₅)₂] and dimethylruthenocene [Ru(η⁵‐C₅H₄Me)₂] ( 7 ), chemical oxidation of highly strained, ring‐tilted [2]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₂] ( 5 ) and slightly strained [3]ruthenocenophane [Ru(η⁵‐C₅H₄)₂(CH₂)₃] ( 6 ) with cationic oxidants containing the non‐coordinating [B(C₆F₅)₄]^? anion was found to afford stable and isolable metal?metal bonded dicationic dimer salts [Ru(η⁵‐C₅H₄)₂(CH₂)₂]₂[B(C₆F₅)₄]₂ ( 8 ) and [Ru(η⁵‐C₅H₄)₂(CH₂)₃]₂[B(C₆F₅)₄]₂ ( 17 ), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting Ru?Ru bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the Ru?Ru bond in 8 was achieved through reaction with the radical source [(CH₃)₂NC(S)S?SC(S)N(CH₃)₂] (thiram), affording unusual dimer [(CH₃)₂NCS₂Ru(η⁵‐C₅H₄)(η³‐C₅H₄)C₂H₄]₂[B(C₆F₅)₄]₂ ( 9 ) through a haptotropic η⁵–η³ ring‐slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C₆H₅ERu(η⁵‐C₅H₄)₂C₂H₄][B(C₆F₅)₄] [E=S ( 15 ) or Se ( 16 )] were synthesized through reaction of 8 with C₆H₅E?EC₆H₅ (E=S or Se).     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Synthese,Struktur und Photochemie von Olefiniridium(I)‐Komplexen mit Acetylacetonatoliganden

Synthesis, Structure, and Photochemical Behavior of Olefine Iridium(I) Complexes with Acetylacetonato Ligands The bis(ethene) complex [Ir(κ²‐acac)(C₂H₄)₂] ( 1 ) reacts with tertiary phosphanes to give the monosubstitution products [Ir(κ²‐acac)(C₂H₄)(PR₃)] ( 2 – 5 ). While 2 (R = iPr) is inert toward PiPr₃, the reaction of 2 with diphenylacetylene affords the π‐alkyne complex [Ir(κ²‐acac)(C₂Ph₂)(PiPr₃)] ( 6 ). Treatment of [IrCl(C₂H₄)₄] with C‐functionalized acetylacetonates yields the compounds [Ir(κ²‐acacR^1,2)(C₂H₄)₂] ( 8 , 9 ), which react with PiPr₃ to give [Ir(κ²‐acacR^1,2)(C₂H₄)(PiPr₃)] ( 10 , 11 ) by displacement of one ethene ligand. UV irradiation of 5 (PR₃ = iPr₂PCH₂CO₂Me) and 11 (R² = (CH₂)₃CO₂Me) leads, after addition of PiPr₃, to the formation of the hydrido(vinyl)iridium(III) complexes 7 and 12 . The reaction of 2 with the ethene derivatives CH₂=CHR (R = CN, OC(O)Me, C(O)Me) affords the compounds [Ir(κ²‐acac)(CH₂=CHR)(PiPr₃)] ( 13 – 15 ), which on photolysis in the presence of PiPr₃ also undergo an intramolecular C–H activation. In contrast, the analogous complexes [Ir(κ²‐acac)(olefin)(PiPr₃)] (olefin = (E)‐C₂H₂(CO₂Me)₂ 16 , (Z)‐C₂H₂(CO₂Me)₂ 17 ) are photochemically inert.     

Theoretical studies on ferromagnetic behavior of [Cr(C5(CH3)5)2]+[TCNE]− and [Mn(C5(CH3)5)2]+[TCNQ]−

By using broken-symmetry hybrid-DFT (UB3LYP and UB2LYP) calculation, the effective exchange integrals (J values) of [Cr(C₅(CH₃)₅)₂]⁺[TCNE]⁻[Cr(C₅(CH₃)₅)₂]⁺ and [Mn(C₅(CH₃)₅)₂]⁺[TCNQ]⁻[Mn(C₅(CH₃)₅)₂]⁺ were determined theoretically. Those calculated models were reduced to 3-spin-sites models from X-ray crystallographic data of charge transfer 3D crystal. The calculated results showed that effective exchange integrals were positive and the signs of spin densities on the cyclopentadienyl rings were negative. These results supported the so-called McConnell I mechanism for ferromagnetism proposed by Kollmar et al. and our previous calculations. Natural orbital analysis made it clear that the orbital overlap between SOMO on metals and SOMO on TCNE or TCNQ cations was nearly zero. These results indicated that orbital orthogonality was an important key factor for explaining the ferromagnetism of those systems.     

Replacement of Trimethylamine in Trimethylamine‐trispentafluoroethyl‐borane. Structures of [(C2F5)3BNMe3], [NMe4][(C2F5)3BOH], and K[(C2F5)3BCH2(CO)C6H5]

Trimethylamine‐tris(pentafluoroethyl)borane [(C₂F₅)₃BNMe₃] ( 1 ) reacts at 190 °C with water under displacement of the trimethylamine ligand to yield the hydroxy‐tris(pentafluoroethyl)borate [(C₂F₅)₃BOH]^? ( 2 ). In tributylamine 1 reacts with alkynes HC≡CR to form novel ethynyl‐tris(pentafluoroethyl)borate anions [(C₂F₅)₃BC≡CR]^? – R = C₆H₅ ( 3 ), C₆H₄CH₃ ( 4 ), Si(CH(CH₃)₂)₃ ( 5 ) – in moderate yields. Compound 3 adds water across the triple bond to form the novel anion [(C₂F₅)₃BCH₂(CO)C₆H₅]^? ( 6 ). The structures of [(C₂F₅)₃BNMe₃], [NMe₄][(C₂F₅)₃BOH] and K[(C₂F₅)₃BCH₂(CO)C₆H₅] have been determined by x‐ray crystallography.     

Lanthanide Complexes with Multidentate Oxime Ligands as Single‐Molecule Magnets and Atmospheric Carbon Dioxide Fixation Systems

The synthesis, structure, and magnetic properties of five lanthanide complexes with multidentate oxime ligands are described. Complexes 1 and 2 ( 1 : [La₂(pop)₂(acac)₄(CH₃OH)], 2 : [Dy₂(pop)(acac)₅]) are synthesized from the 2‐hydroxyimino‐N‐[1‐(2‐pyridyl)ethylidene]propanohydrazone (Hpop) ligand, while 3 , 4 , and 5 ( 3 : [Dy₂(naphthsaoH)₂(acac)₄H(OH)]?0.85 CH₃CN?1.58 H₂O; 4 : [Tb₂(naphthsaoH)₂(acac)₄H(OH)]?0.52 CH₃CN?1.71 H₂O; 5 : [La₆(CO₃)₂(naphthsao)₅ (naphthsaoH)_0.5(acac)₈(CO₃)_0.5(CH₃OH)_2.76H_5.5(H₂O)_1.24]?2.39 CH₃CN?0.12 H₂O) contain 1‐(1‐hydroxynaphthalen‐2‐yl)‐ethanone oxime (naphthsaoH₂). In 1 – 4 , dinuclear [Ln₂] complexes crystallize, whereas hexanuclear La^III complex 5 is formed after fixation of atmospheric carbon dioxide. Dy^III‐based complexes 2 and 3 display single‐molecule‐magnet properties with energy barriers of 27 and 98 K, respectively. The presence of a broad and unsymmetrical relaxation mode observed in the ac susceptibility data for 3 suggest two different dynamics of the magnetization which might be a consequence of independent relaxation processes of the two different Dy³⁺ ions.     

Cationic Allyl Complexes of the Rare‐Earth Metals: Synthesis,Structural Characterization,and 1,3‐Butadiene Polymerization Catalysis

Monocationic bis‐allyl complexes [Ln(η³‐C₃H₅)₂(thf)₃]⁺[B(C₆X₅)₄]^? (Ln=Y, La, Nd; X=H, F) and dicationic mono‐allyl complexes of yttrium and the early lanthanides [Ln(η³‐C₃H₅)(thf)₆]²⁺[BPh₄]₂^? (Ln=La, Nd) were prepared by protonolysis of the tris‐allyl complexes [Ln(η³‐C₃H₅)₃(diox)] (Ln=Y, La, Ce, Pr, Nd, Sm; diox=1,4‐dioxane) isolated as a 1,4‐dioxane‐bridged dimer (Ln=Ce) or THF adducts [Ln(η³‐C₃H₅)₃(thf)₂] (Ln=Ce, Pr). Allyl abstraction from the neutral tris‐allyl complex by a Lewis acid, ER₃ (Al(CH₂SiMe₃)₃, BPh₃) gave the ion pair [Ln(η³‐C₃H₅)₂(thf)₃]⁺[ER₃(η¹‐CH₂CH?CH₂)]^? (Ln=Y, La; ER₃=Al(CH₂SiMe₃)₃, BPh₃). Benzophenone inserts into the La? C_allyl bond of [La(η³‐C₃H₅)₂(thf)₃]⁺[BPh₄]^? to form the alkoxy complex [La{OCPh₂(CH₂CH?CH₂)}₂(thf)₃]⁺[BPh₄]^?. The monocationic half‐sandwich complexes [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)(thf)₂]⁺[B(C₆X₅)₄]^? (Ln=Y, La; X=H, F) were synthesized from the neutral precursors [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)₂(thf)] by protonolysis. For 1,3‐butadiene polymerization catalysis, the yttrium‐based systems were more active than the corresponding lanthanum or neodymium homologues, giving polybutadiene with approximately 90 % 1,4‐cis stereoselectivity.     

The effect of the amido substituent on polymer molecular weight in propene homopolymerisation by titanium cyclopentadienyl‐amide catalysts

In the homopolymerisation of propene by the cyclopentadienyl‐amide titanium catalyst systems [η⁵,η¹‐C₅H₄(CH₂)₂NR]TiCl₂/MAO and [η⁵,η¹‐C₅H₄(CH₂)₂NR]Ti(CH₂Ph)₂/B(C₆F₅)₃ (R = ^tBu, ⁱPr, Me), the catalyst with the smallest substituent (Me) on the amido moiety consistently gives the highest polymer molecular weight. This differs from the trend usually observed in related catalysts with tetramethylcyclopentadienyl‐amide ancillary ligands, where larger amide substituents result in higher molecular weights. Based on the present information a hypothesis is formulated in which an increased cation‐anion interaction for the less sterically hindered catalyst is responsible for disfavouring chain transfer relative to chain growth.     

Synthesis,Properties, and Application of Tetrakis(pentafluoroethyl)gallate, [Ga(C2F5)4]−

Weakly coordinating anions (WCAs) are important for academic reasons as well as for technical applications. Tetrakis(pentafluoroethyl)gallate, [Ga(C₂F₅)₄]^?, a new WCA, is accessible by treatment of [GaCl₃(dmap)] (dmap=4‐dimethylaminopyridine) with LiC₂F₅. The anion [Ga(C₂F₅)₄]^? proved to be reluctant towards deterioration by aqueous hydrochloric acid or lithium hydroxide. Various salts of [Ga(C₂F₅)₄]^? were synthesized with cations such as [PPh₄]⁺, [CPh₃]⁺, [(O₂H₅)₂(OH₂)₂]²⁺, and [Li(dec)₂]⁺ (dec=diethyl carbonate). Thermolysis of [(O₂H₅)₂(OH₂)₂][Ga(C₂F₅)₄]₂ gives rise to a dihydrate of tris(pentafluoroethyl)gallane, [Ga(C₂F₅)₃(OH₂)₂]. All products were characterized by NMR and IR spectroscopy, mass spectrometry, X‐ray diffraction, and elemental analysis. Furthermore, an outlook for the application of [Li(dec)₂][Ga(C₂F₅)₄] as a conducting salt in lithium‐ion batteries is presented.     

Stable Borane Adducts of Alcoholates and Carboxylates

Six adducts of B(C₆F₅)₃ and archetypical alcoholates and carboxylates, were prepared and isolated as crystalline sodium crown ether salts, [Na(15‐crown‐5)][CH₃O · B(C₆F₅)₃] ( 1 ), [Na(15‐crown‐5)][CH₃CH₂O · B(C₆F₅)₃] ( 2 ), [Na(15‐crown‐5)][HCO₂ · B(C₆F₅)₃] ( 3 ), [Na(15‐crown‐5)][(H₃CCO₂ · B(C₆F₅)₃] ( 4 ), [Na(15‐crown‐5)][(F₃CCO₂ · B(C₆F₅)₃] ( 5 ), and [Na₂(15‐crown‐5)₃][C₂O₄ · 2 B(C₆F₅)₃] ( 6 ). All compounds were fully characterized by multinuclear NMR‐ and IR spectroscopy, ESI MS spectrometry, and X‐ray crystallography.     

One- and Two-Electron Transfer Oxidation of 1,4-Disilabenzene with Formation of Stable Radical Cations and Dications

Electron-transferable oxidants such as B(C₆F₅)₃/nBuLi, B(C₆F₅)₃/LiB(C₆F₅)₄, B(C₆F₅)₃/LiHBEt₃, Al(C₆F₅)₃/(o-RC₆H₄)AlH₂ (R=N(CMe₂CH₂)₂CH₂), B(C₆F₅)₃/AlEt₃, Al(C₆F₅)₃, Al(C₆F₅)₃/nBuLi, Al(C₆F₅)₃/AlMe₃, (CuC₆F₅)₄, and Ag₂SO₄, respectively were employed for reactions with (L)₂Si₂C₄(SiMe₃)₂(C₂SiMe₃)₂ (L=PhC(NtBu)₂, 1 ). The stable radical cation [ 1 ]^+. was formed and paired with the anions [nBuB(C₆F₅)₃]⁻ (in 2 ), [B(C₆F₅)₄]⁻ (in 3 ), [HB(C₆F₅)₃]⁻ (in 4 ), [EtB(C₆F₅)₃]⁻ (in 5 ), {[(C₆F₅)₃Al]₂(μ-F)]⁻ (in 6 ), [nBuAl(C₆F₅)₃]⁻ (in 7 ), and [Cu(C₆F₅)₂]⁻ (in 8 ), respectively. The stable dication [ 1 ]²⁺ was also generated with the anions [EtB(C₆F₅)₃]⁻ ( 9 ) and [MeAl(C₆F₅)₃]⁻ ( 10 ), respectively. In addition, the neutral compound [(L)₂Si₂C₄(SiMe₃)₂(C₂SiMe₃)₂][μ-O₂S(O)₂] ( 11 ) was obtained. Compounds 2 – 11 are characterized by UV-vis absorption spectroscopy, X-ray crystallography, and elemental analysis. Compounds 2 – 8 are analyzed by EPR spectroscopy and compounds 9 – 11 by NMR spectroscopy. The structure features are discussed on the central Si₂C₄-rings of 1 , [ 1 ]^+., [ 1 ]²⁺, and 11 , respectively.     

A dimeric constrained‐geometry titanium complex linked by double Ti–CH2–Al–CH2 heterocycles

In the structure of bis({N‐[di­methyl(1η⁵‐2,3,4,6‐tetra­methyl­in­den­yl)­silyl]­cyclo­hexyl­amido‐1κN}(methyl‐3κC)‐di‐μ₃‐methyl­ene‐1:2:3κ³C;1:3:3′κ³C‐tris(pentafluorophenyl‐2κC)titanium) benzene disolvate, [Me₂Si(η⁵‐2,3,4,6‐Me₄C₉H₂)(C₆H₁₁N)]Ti[(μ₃‐CH₂)Al(C₆F₅)₃][AlMe(μ₃‐CH₂)]₂ or [Ti₂(C₂₁H₇AlF₁₅)₂(C₂₁H₃₁NSi)₂]·2C₆D₆, the dimer is located on an inversion center, and the two Ti centers are linked by double Ti(μ₃‐CH₂)Al(C₆F₅)₃AlMe(μ₃‐CH₂) heterocycles. The electron‐deficient Ti centers are further stabilized by two α‐agostic interactions between Ti and one H atom of each bridging methyl­ene group.     

Rare‐Earth‐Metal–Hydrocarbyl Complexes Bearing Linked Cyclopentadienyl or Fluorenyl Ligands: Synthesis,Catalyzed Styrene Polymerization,and Structure–Reactivity Relationship

A series of rare‐earth‐metal–hydrocarbyl complexes bearing N‐type functionalized cyclopentadienyl (Cp) and fluorenyl (Flu) ligands were facilely synthesized. Treatment of [Y(CH₂SiMe₃)₃(thf)₂] with equimolar amount of the electron‐donating aminophenyl‐Cp ligand C₅Me₄H‐C₆H₄‐o‐NMe₂ afforded the corresponding binuclear monoalkyl complex [({C₅Me₄‐C₆H₄‐o‐NMe(μ‐CH₂)}Y{CH₂SiMe₃})₂] ( 1 a ) via alkyl abstraction and C? H activation of the NMe₂ group. The lutetium bis(allyl) complex [(C₅Me₄‐C₆H₄‐o‐NMe₂)Lu(η³‐C₃H₅)₂] ( 2 b ), which contained an electron‐donating aminophenyl‐Cp ligand, was isolated from the sequential metathesis reactions of LuCl₃ with (C₅Me₄‐C₆H₄‐o‐NMe₂)Li (1 equiv) and C₃H₅MgCl (2 equiv). Following a similar procedure, the yttrium‐ and scandium–bis(allyl) complexes, [(C₅Me₄‐C₅H₄N)Ln(η³‐C₃H₅)₂] (Ln=Y ( 3 a ), Sc ( 3 b )), which also contained electron‐withdrawing pyridyl‐Cp ligands, were also obtained selectively. Deprotonation of the bulky pyridyl‐Flu ligand (C₁₃H₉‐C₅H₄N) by [Ln(CH₂SiMe₃)₃(thf)₂] generated the rare‐earth‐metal–dialkyl complexes, [(η³‐C₁₃H₈‐C₅H₄N)Ln(CH₂SiMe₃)₂(thf)] (Ln=Y ( 4 a ), Sc ( 4 b ), Lu ( 4 c )), in which an unusual asymmetric η³‐allyl bonding mode of Flu moiety was observed. Switching to the bidentate yttrium–trisalkyl complex [Y(CH₂C₆H₄‐o‐NMe₂)₃], the same reaction conditions afforded the corresponding yttrium bis(aminobenzyl) complex [(η³‐C₁₃H₈‐C₅H₄N)Y(CH₂C₆H₄‐o‐NMe₂)₂] ( 5 ). Complexes 1 – 5 were fully characterized by ¹H and ¹³C NMR and X‐ray spectroscopy, and by elemental analysis. In the presence of both [Ph₃C][B(C₆F₅)₄] and AliBu₃, the electron‐donating aminophenyl‐Cp‐based complexes 1 and 2 did not show any activity towards styrene polymerization. In striking contrast, upon activation with [Ph₃C][B(C₆F₅)₄] only, the electron‐withdrawing pyridyl‐Cp‐based complexes 3 , in particular scandium complex 3 b , exhibited outstanding activitiy to give perfectly syndiotactic (rrrr >99 %) polystyrene, whereas their bulky pyridyl‐Flu analogues ( 4 and 5 ) in combination with [Ph₃C][B(C₆F₅)₄] and AliBu₃ displayed much‐lower activity to afford syndiotactic‐enriched polystyrene.     

Replacement of the Common Chromium Source CrCl3(thf)3 with Well-Defined [CrCl2(μ-Cl)(thf)2]2

CrCl₃(thf)₃ is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl₃ ([CrCl₂(μ-Cl)(thf)₂]₂), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl₃·6H₂O at 100 °C, treatment with 6 equivalents of Me₃SiCl in a minimal amount of THF, and crystallization from CH₂Cl₂. The ethylene tetramerization catalyst [iPrN{P(C₆H₄-p-Si(nBu)₃)₂}₂CrCl₂]⁺[B(C₆F₅)₄]⁻ prepared using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl₃(thf)₃ was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a Cr source, single crystals of [(CH₃CN)₄CrCl₂]⁺[B(C₆F₅)₄]⁻ and [{Et(Cl)Al(N(iPr)₂)₂}Cr(μ-Cl)]₂ were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl₃(thf)₃ was used as the Cr source.     

Structure and Magnetism of two Polynuclear Complexes Containing both Macrocyclic and Azido Ligands

The two complexes of formula [Cu₂(CuL)₂(μ‐N₃)₄] · 2CH₃OH ( 1 ) and [Cu₂(NiL)₂(μ‐N₃)₄] · 2CH₃OH ( 2 ) (CuL and NiL, H₂L = 2,3‐dioxo‐5,6,14,15‐dibenzo‐1,4,8,12‐tetraazacyclo‐pentadeca‐7,13‐dien), were synthesized and structurally determined. The magnetic susceptibility data of 1 and 2 were analyzed. For complex 1 , magnetic measurements show alternating ferromagnetic and antiferromagnetic exchange couplings J₁ = 23.67 cm^–1, J₂ = –189.11 cm^–1, zJ’ = –0.62 cm^–1. For complex 2 , the doubly bridged asymmetric EO promotes a ferromagnetic interaction between Cu^II and Cu^II ions(J = 40.764 cm^–1).     

Thermochemistry of bis-arene- and arenetricarbonyl-chromium compounds containing hexamethylbenzene, 1,3,5-trimethylbenzene and naphthalene.

Microcalorimetric measurements at elevated temperatures of the heats of thermal decomposition and iodination have led to values of the standard enthalpies of formation of the following crystalline compounds (values given in kJ mol^?1) at 298K: [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (63±12); [Cr(η⁶-C₆(CH₃)₆)₂] : -(88±12); [Cr(1,2,3,4,4a,8a-η-C₁₀H₈)₂] = (407±11); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = -(258±8). Separate measurements by the vacuum sublimation microcalorimetric technique gave the following values for the enthalpy of sublimation at 298K (kJ mol^?1) : [Cr(η⁶-1,3,5-C₆H₃(CH₃)₃)₂] = (104±1); [Cr(η⁶-C₆(CH₃)₆)₂] = (119±4); [Cr(CO)₃(1,2,3,4,4a,8a-η-C₁₀H₈)] = (107±3). From these and other data, the bond enthalpy contributions of the metal-ligand bonds in the gaseous metal complexes were evaluated as follows: [(η₆-C₆(CH₃)₆)-Cr] (155±7); [(η⁶-C₆H₃(CH₃)₃)-Cr] (151±6); [(1,2,3,4,4a, 8a-η-C₁₀H₈)-Cr](145±6) kJ mol^?1]The question of the transferability of the enthalpy contributions of chromium—ligand bonds between organochronium complexes is discussed with aid of information from structural and spectroscopic investigation. The limitations of the procedure are defined.The thermodynamic data are used to discuss various substitution, redistribution and exchange reaction of Cr(η-arene)₂ and [Cr(CO)₃(η-arene)] compounds.     

The Arene‐Stabilized η5‐Pentamethylcyclopentadienyl Arsenic Dication [(η5‐Cp*)As(toluene)]2+

Double chloride abstraction of Cp*AsCl₂ gives the dicationic arsenic species [(η⁵‐Cp*)As(tol)][B(C₆F₅)₄]₂ ( 2 ) (tol=toluene). This species is shown to exhibit Lewis super acidity by the Gutmann–Beckett test and by fluoride abstraction from [NBu₄][SbF₆]. Species 2 participates in the FLP activation of THF affording [(η²‐Cp*)AsO(CH₂)₄(THF)][B(C₆F₅)₄]₂ ( 5 ). The reaction of 2 with PMe₃ or dppe generates [(Me₃P)₂As][B(C₆F₅)₄] ( 6 ) and [(σ‐Cp*)PMe₃][B(C₆F₅)₄] ( 7 ), or [(dppe)As][B(C₆F₅)₄] ( 8 ) and [(dppe)(σ‐Cp*)₂][B(C₆F₅)₄]₂ ( 9 ), respectively, through a facile cleavage of C?As bonds, thus showcasing unusual reactivity of this unique As‐containing compound.     

Synthesis,Structure and Characterization of Dinuclear Pentacoordinate Molybdenum(V) Complexes with Thiosemicarbazone Ligands

New dinuclear pentacoordinate molybdenum(V) complexes, [Mo₂^VO₃L₂] [L = thiosemicarbazonato ligand: C₆H₄(O)CH:NN:C(S)NHR′ and C₁₀H₆(O)CH:NN:C(S)NHR′; R′ = H, CH₃, C₆H₅) were obtained either by oxygen atom abstraction from Mo^VIO₂L with triphenylphosphine or by using [Mo₂O₃(acac)₄] in the reaction with the corresponding ligands H₂L. Crystal and molecular structure of [Mo₂O₃{C₆H₄(O)CH:NN:C(S)NHC₆H₅}₂] · CH₃CN has been determined by the single‐crystal X‐ray diffraction method.     

Reactions of [Pd(C6F5)2(CNR)2] with [PdCl2(NCPh)2]. Insertion of p-MeC6H4NC into Pd-C6F5 bonds

[Pd(C₆F₅)₂(CNR)₂] (R = Cy, Bu^t, p-MeC₆H₄ (p-Tol)) react with [PdCl₂(NCPh)₂] to give [Pd₂(μ-Cl)₂(C₆F₅)₂(CNR)₂]. In refluxing benzene insertion of isocyanide into the C₆F₅Pd bonds occurs only for R = p-Tol, to give a imidoyl bridged polynuclear complex cis-[Pd₂ (μ-Cl)₂[μ-C(C₆F₅) = N(Tol-p)]_2n]. This complex reacts with (a) Tl(acac) to give [Pd₂{μ-C(C₆F₅) = N(Tol-p)}₂(acac)₂]; (b) neutral monodentate ligands to afford dimeric complexes [Pd₂{μ-C(C₆F₅) = N(Tol-p)}₂Cl₂L₂] (L = NMe₃, py, 4-Me-py, SC₄H₈), and (c) isocyanides to give insoluble complexes of the same composition which are thought to be polymeric, [$\text{Pd}$(CNR)Cl{μ-C(C₆F₅) = $\text{N}$(p-Tol)}]_n (R = p-Tol, Me, Bu^t). Thermal decomposition of cis-[Pd₂ (μ-Cl)₂ [μ-C(C₆F₅) = N( p-Tol)]_2n] gives the diazabutadiene species (p-Tol)NC(C₆F₅)C(C₆F₅)N(p-Tol) in high yield.     

Synthesis,Structure, and Luminescence Properties of a {Mo6I8} Complex with (C6F5)2PO2 Ligands

Reaction of [Mo₆I₈(CH₃COO)₆]^2– with bis(pentafluorophenyl)phosphinic acid HO(O)P(C₆F₅)₂ yielded a new bright‐red luminescent complex [{Mo₆I₈}(O₂P(C₆F₅)₂)₆]^2–, isolated as (Bu₄N)(H₅O₂)[{Mo₆I₈}(O₂P(C₆F₅)₂)₆] · 3(Et₂O) · 1.5(acetone). It was characterized by X‐ray analysis, CV, ESI‐mass spectrometry, and NMR spectroscopy.