Potential-energy surface for the electronic ground state of NH3 up to 20,000 cm-1 above equilibrium

Ab initio coupled cluster calculations with single and double substitutions and a perturbative treatment of connected triple excitations [CCSD(T)] with the augmented correlation-consistent polarized valence triple-zeta aug-cc-pVTZ basis at 51 816 geometries provide a six-dimensional potential-energy surface for the electronic ground state of NH3. At 3814 selected geometries, CBS+ energies are obtained by extrapolating the CCSD(T) results for the aug-cc-pVXZ(X=T,Q,5) basis sets to the complete basis set (CBS) limit and adding corrections for core-valence correlation and relativistic effects. CBS** ab initio energies are generated at 51,816 geometries by an empirical extrapolation of the CCSD(T)/aug-cc-pVTZ results to the CBS+ limit. They cover the energy region up to 20,000 cm-1 above equilibrium. Parametrized analytical functions are fitted through the ab initio points. For these analytical surfaces, vibrational term values and transition moments are calculated by means of a variational program employing a kinetic-energy operator expressed in the Eckart-Sayvetz frame. Comparisons against experiment are used to assess the quality of the generated potential-energy surfaces. A "spectroscopic" potential-energy surface of NH3 is determined by a slight empirical adjustment of the ab initio potential to the experimental vibrational term values. Variational calculations on this refined surface yield rms deviations from experiment of 0.8 cm-1 for 24 inversion splittings and 0.4 (3.0) cm-1 for 34 (51) vibrational term values up to 6100 (10,300) cm-1.     

Toward a less costly but accurate calculation of the CCSD(T)/CBS noncovalent interaction energy

The popular method of calculating the noncovalent interaction energies at the coupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] theory level in the complete basis set (CBS) limit was to add a CCSD(T) correction term to the CBS second-order Møller-Plesset perturbation theory (MP2). The CCSD(T) correction term is the difference between the CCSD(T) and MP2 interaction energies evaluated in a medium basis set. However, the CCSD(T) calculations with the medium basis sets are still very expensive for systems with more than 30 atoms. Comparatively, the domain-based local pair natural orbital coupled-cluster method [DLPNO-CCSD(T)] can be applied to large systems with over 1,000 atoms. Considering both the computational accuracy and efficiency, in this work, we propose a new scheme to calculate the CCSD(T)/CBS interaction energies. In this scheme, the MP2/CBS term keeps intact and the CCSD(T) correction term is replaced by a DLPNO-CCSD(T) correction term which is the difference between the DLPNO-CCSD(T) and DLPNO-MP2 interaction energies evaluated in a medium basis set. The interaction energies of the noncovalent systems in the S22, HSG, HBC6, NBC10, and S66 databases were recalculated employing this new scheme. The consistent and tight settings of the truncation parameters for DLPNO-CCSD(T) and DLPNO-MP2 in this noncanonical CCSD(T)/CBS calculations lead to the maximum absolute deviation and root-mean-square deviation from the canonical CCSD(T)/CBS interaction energies of less than or equal to 0.28 kcal/mol and 0.09 kcal/mol, respectively. The high accuracy and low cost of this new computational scheme make it an excellent candidate for the study of large noncovalent systems.     

Physical nature of silane⋯carbene dimers revealed by state-of-the-art ab initio calculations

Using the SAPT2 + 3(CCD)δMP2 method in complete basis set (CBS) limit, it is shown that the interactions in the recently studied silane⋯carbene dimers are mainly dispersive in nature. Consequently, slow convergence of dispersion energy also forces slow convergence of the interaction energy. Therefore, obtaining very accurate values requires extrapolation of the correlation part to the CBS limit. The most accurate values obtained at the CCSD(T)/CBS level of theory show that the studied silane⋯carbene dimers are rather weakly bound, with interaction energies ranging from about −1.9 to −1.3 kcal/mol. Comparing to CCSD(T)/CBS, it will be shown that SCS-MP2 and MP2C methods clearly underestimate and methods based on SAPT2+ and having some third-order corrections, as well as the MP2 method, overestimate values of interaction energies. Popular SAPT(DFT) method performs better than SCS-MP2 and MP2C; nevertheless, underestimation is still considerable. The underestimation is slightly quenched if third-order dispersion energy and its exchange counterpart is added to the SAPT(DFT). The closest value of CCSD(T)/CBS has been given by the SAPT2 + (3)(CCD)δMP2 method in quadruple-ζ basis set. © 2019 Wiley Periodicals, Inc.     

Probing the effects of heterogeneity on delocalized pi...pi interaction energies

Dimers composed of benzene (Bz), 1,3,5-triazine (Tz), cyanogen (Cy) and diacetylene (Di) are used to examine the effects of heterogeneity at the molecular level and at the cluster level on pi...pi stacking energies. The MP2 complete basis set (CBS) limits for the interaction energies (E(int)) of these model systems were determined with extrapolation techniques designed for correlation consistent basis sets. CCSD(T) calculations were used to correct for higher-order correlation effects (deltaE(CCSD)(T)(MP2)) which were as large as +2.81 kcal mol(-1). The introduction of nitrogen atoms into the parallel-slipped dimers of the aforementioned molecules causes significant changes to E(int). The CCSD(T)/CBS E(int) for Di-Cy is -2.47 kcal mol(-1) which is substantially larger than either Cy-Cy (-1.69 kcal mol(-1)) or Di-Di (-1.42 kcal mol(-1)). Similarly, the heteroaromatic Bz-Tz dimer has an E(int) of -3.75 kcal mol(-1) which is much larger than either Tz-Tz (-3.03 kcal mol(-1)) or Bz-Bz (-2.78 kcal mol(-1)). Symmetry-adapted perturbation theory calculations reveal a correlation between the electrostatic component of E(int) and the large increase in the interaction energy for the mixed dimers. However, all components (exchange, induction, dispersion) must be considered to rationalize the observed trend. Another significant conclusion of this work is that basis-set superposition error has a negligible impact on the popular deltaE(CCSD)(T)(MP2) correction, which indicates that counterpoise corrections are not necessary when computing higher-order correlation effects on E(int). Spin-component-scaled MP2 (SCS-MP2 and SCSN-MP2) calculations with a correlation-consistent triple-zeta basis set reproduce the trends in the interaction energies despite overestimating the CCSD(T)/CBS E(int) of Bz-Tz by 20-30%.     

He2F-体系的分子间相互作用势能面

使用高水平的从头算CCSD(T)/aug-cc-pVTZ方法, 经过Counterpoise校正, 计算了He2F-体系的分子间相互作用势能面. 在He2F-体系的相互作用势能面的最小值处, 发现了一个等腰三角形的稳定结构. 在这个结构中, He…F- 距离是 0.334 nm, He…He 的距离是 0.295 nm, ∠HeF-He 为 52.5°. 计算了此稳定结构的频率、相互作用能、二体相互作用能和三体相互作用能. 在CCSD(T)/d-aug-cc-pVTZ水平下, 相互作用能为-1.727 kJ/mol.     

Ab initio and analytic intermolecular potentials for Ar-CF4

Ab initio calculations at the CCSD(T) level of theory were performed to characterize the Ar + CF4 intermolecular potential. Potential energy curves were calculated with the aug-cc-pVTZ basis set, and with and without a correction for basis set superposition error (BSSE). Additional calculations were performed with other correlation consistent basis sets to extrapolate the Ar-CF4 potential energy minimum to the complete basis set (CBS) limit. Both the size of the basis set and BSSE have substantial effects on the Ar + CF4 potential. Calculations with the aug-cc-pVTZ basis set, and with a BSSE correction, appear to give a good representation of the BSSE corrected potential at the CBS limit. In addition, MP2 theory is found to give potential energies in very good agreement with those determined by the much higher level CCSD(T) theory. Two model analytic potential energy functions were determined for Ar + CF4. One is a fit to the aug-cc-pVTZ calculations with a BSSE correction. The second was derived by fitting an average BSSE corrected potential, which is an average of the CCSD(T)/aug-cc-pVTZ potentials with and without a BSSE correction. These analytic functions are written as a sum of two-body potentials and excellent fits to the ab initio potentials are obtained by representing each two-body interaction as a Buckingham potential.     

Highly Accurate CCSD(T) and DFT–SAPT Stabilization Energies of H‐Bonded and Stacked Structures of the Uracil Dimer

The CCSD(T) interaction energies for the H‐bonded and stacked structures of the uracil dimer are determined at the aug‐cc‐pVDZ and aug‐cc‐pVTZ levels. On the basis of these calculations we can construct the CCSD(T) interaction energies at the complete basis set (CBS) limit. The most accurate energies, based either on direct extrapolation of the CCSD(T) correlation energies obtained with the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets or on the sum of extrapolated MP2 interaction energies (from aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets) and extrapolated ΔCCSD(T) correction terms [difference between CCSD(T) and MP2 interaction energies] differ only slightly, which demonstrates the reliability and robustness of both techniques. The latter values, which represent new standards for the H‐bonding and stacking structures of the uracil dimer, differ from the previously published data for the S22 set by a small amount. This suggests that interaction energies of the S22 set are generated with chemical accuracy. The most accurate CCSD(T)/CBS interaction energies are compared with interaction energies obtained from various computational procedures, namely the SCS–MP2 (SCS: spin‐component‐scaled), SCS(MI)–MP2 (MI: molecular interaction), MP3, dispersion‐augmented DFT (DFT–D), M06–2X, and DFT–SAPT (SAPT: symmetry‐adapted perturbation theory) methods. Among these techniques, the best results are obtained with the SCS(MI)–MP2 method. Remarkably good binding energies are also obtained with the DFT–SAPT method. Both DFT techniques tested yield similarly good interaction energies. The large magnitude of the stacking energy for the uracil dimer, compared to that of the benzene dimer, is explained by attractive electrostatic interactions present in the stacked uracil dimer. These interactions force both subsystems to approach each other and the dispersion energy benefits from a shorter intersystem separation.     

Nitrous oxide dimer: a new potential energy surface and rovibrational spectrum of the nonpolar isomer

The spectrum of nitrous oxide dimer was investigated by constructing new potential energy surfaces using coupled-cluster theory and solving the rovibrational Schro?dinger equation with a Lanczos algorithm. Two four-dimensional (rigid monomer) global ab initio potential energy surfaces (PESs) were made using an interpolating moving least-squares (IMLS) fitting procedure specialized to describe the interaction of two linear fragments. The first exploratory fit was made from 1646 CCSD(T)/3ZaP energies. Isomeric minima and connecting transition structures were located on the fitted surface, and the energies of those geometries were benchmarked using complete basis set (CBS) extrapolations, counterpoise (CP) corrections, and explicitly correlated (F12b) methods. At the geometries tested, the explicitly correlated F12b method produced energies in close agreement with the estimated CBS limit. A second fit to 1757 data at the CCSD(T)-F12b/VTZ-F12 level was constructed with an estimated fitting error of less than 1.5?cm(-1). The second surface has a global nonpolar O-in minimum, two T-shaped N-in minima, and two polar minima. Barriers between these minima are small and some wave functions have amplitudes in several wells. Low-lying rovibrational wave functions and energy levels up to about 150?cm(-1) were computed on the F12b PES using a discrete variable representation/finite basis representation method. Calculated rotational constants and intermolecular frequencies are in very close agreement with experiment.     

Explicit correlation and basis set superposition error: the structure and energy of carbon dioxide dimer

We have investigated the slipped parallel and t-shaped structures of carbon dioxide dimer [(CO(2))(2)] using both conventional and explicitly correlated coupled cluster methods, inclusive and exclusive of counterpoise (CP) correction. We have determined the geometry of both structures with conventional coupled cluster singles doubles and perturbative triples theory [CCSD(T)] and explicitly correlated cluster singles doubles and perturbative triples theory [CCSD(T)-F12b] at the complete basis set (CBS) limits using custom optimization routines. Consistent with previous investigations, we find that the slipped parallel structure corresponds to the global minimum and is 1.09 kJ mol(-1) lower in energy. For a given cardinal number, the optimized geometries and interaction energies of (CO(2))(2) obtained with the explicitly correlated CCSD(T)-F12b method are closer to the CBS limit than the corresponding conventional CCSD(T) results. Furthermore, the magnitude of basis set superposition error (BSSE) in the CCSD(T)-F12b optimized geometries and interaction energies is appreciably smaller than the magnitude of BSSE in the conventional CCSD(T) results. We decompose the CCSD(T) and CCSD(T)-F12b interaction energies into the constituent HF or HF CABS, CCSD or CCSD-F12b, and (T) contributions. We find that the complementary auxiliary basis set (CABS) singles correction and the F12b approximation significantly reduce the magnitude of BSSE at the HF and CCSD levels of theory, respectively. For a given cardinal number, we find that non-CP corrected, unscaled triples CCSD(T)-F12b/VXZ-F12 interaction energies are in overall best agreement with the CBS limit.     

Benchmark database of accurate (MP2 and CCSD(T) complete basis set limit) interaction energies of small model complexes, DNA base pairs, and amino acid pairs

MP2 and CCSD(T) complete basis set (CBS) limit interaction energies and geometries for more than 100 DNA base pairs, amino acid pairs and model complexes are for the first time presented together. Extrapolation to the CBS limit is done by using two-point extrapolation methods and different basis sets (aug-cc-pVDZ - aug-cc-pVTZ, aug-cc-pVTZ - aug-cc-pVQZ, cc-pVTZ - cc-pVQZ) are utilized. The CCSD(T) correction term, determined as a difference between CCSD(T) and MP2 interaction energies, is evaluated with smaller basis sets (6-31G** and cc-pVDZ). Two sets of complex geometries were used, optimized or experimental ones. The JSCH-2005 benchmark set, which is now available to the chemical community, can be used for testing lower-level computational methods. For the first screening the smaller training set (S22) containing 22 model complexes can be recommended. In this case larger basis sets were used for extrapolation to the CBS limit and also CCSD(T) and counterpoise-corrected MP2 optimized geometries were sometimes adopted.     

Stabilisation energy of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, I, CN) complexes: complete basis set limit calculations at MP2 and CCSD(T) levels

Stabilisation energies of stacked structures of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, CN) complexes were determined at the CCSD(T) complete basis set (CBS) limit level. These energies were constructed from MP2/CBS stabilisation energies and a CCSD(T) correction term determined with a medium basis set (6-31G**). The former energies were extrapolated using the two-point formula of Helgaker et al. from aug-cc-pVDZ and aug-cc-pVTZ Hartree-Fock energies and MP2 correlation energies. The CCSD(T) correction term is systematically repulsive. The final CCSD(T)/CBS stabilisation energies are large, considerably larger than previously calculated and increase in the series as follows: hexafluorobenzene (6.3 kcal mol(-1)), hexachlorobenzene (8.8 kcal mol(-1)), hexabromobenzene (8.1 kcal mol(-1)) and hexacyanobenzene (11.0 kcal mol(-1)). MP2/SDD** relativistic calculations performed for all complexes mentioned and also for benzene[dot dot dot]hexaiodobenzene have clearly shown that due to relativistic effects the stabilisation energy of the hexaiodobenzene complex is lower than that of hexabromobenzene complex. The decomposition of the total interaction energy to physically defined energy components was made by using the symmetry adapted perturbation treatment (SAPT). The main stabilisation contribution for all complexes investigated is due to London dispersion energy, with the induction term being smaller. Electrostatic and induction terms which are attractive are compensated by their exchange counterparts. The stacked motif in the complexes studied is very stable and might thus be valuable as a supramolecular synthon.     

On the accuracy of explicitly correlated coupled-cluster interaction energies--have orbital results been beaten yet?

The basis set convergence of weak interaction energies for dimers of noble gases helium through krypton is studied for six variants of the explicitly correlated, frozen geminal coupled-cluster singles, doubles, and noniterative triples [CCSD(T)-F12] approach: the CCSD(T)-F12a, CCSD(T)-F12b, and CCSD(T)(F12*) methods with scaled and unscaled triples. These dimers were chosen because CCSD(T) complete-basis-set (CBS) limit benchmarks are available for them to a particularly high precision. The dependence of interaction energies on the auxiliary basis sets has been investigated and it was found that the default resolution-of-identity sets cc-pVXZ/JKFIT are far from adequate in this case. Overall, employing the explicitly correlated approach clearly speeds up the basis set convergence of CCSD(T) interaction energies, however, quite surprisingly, the improvement is not as large as the one achieved by a simple addition of bond functions to the orbital basis set. Bond functions substantially improve the CCSD(T)-F12 interaction energies as well. For small and moderate bases with bond functions, the accuracy delivered by the CCSD(T)-F12 approach cannot be matched by conventional CCSD(T). However, the latter method in the largest available bases still delivers the CBS limit to a better precision than CCSD(T)-F12 in the largest bases available for that approach. Our calculations suggest that the primary reason for the limited accuracy of the large-basis CCSD(T)-F12 treatment are the approximations made at the CCSD-F12 level and the non-explicitly correlated treatment of triples. In contrast, the explicitly correlated second-order Mo?ller-Plesset perturbation theory (MP2-F12) approach is able to pinpoint the complete-basis-set limit MP2 interaction energies of rare gas dimers to a better precision than conventional MP2. Finally, we report and analyze an unexpected failure of the CCSD(T)-F12 method to deliver the core-core and core-valence correlation corrections to interaction energies consistently and accurately.     

The p-difluorobenzene-argon S1 excited state intermolecular potential energy surface

The first excited state (S1) intermolecular potential energy surface for the p-difluorobenzene-Ar van der Waals complex is evaluated using the coupled-cluster method and the augmented correlation consistent polarized valence double-zeta basis set extended with a set of 3s3p2d1f1g midbond functions. In order to calculate the S1 interaction energies we use the ground state surface evaluated with the same basis set and the coupled-cluster singles and doubles [CCSD] including connected triple excitations [CCSD(T)] model, and interaction and excitation energies evaluated at the CCSD level. The surface minima are characterized by the Ar atom located above and below the p-difluorobenzene center of mass at a distance of 3.4736 A. The corresponding interaction energy is -435.233 cm-1. The surface is used in the evaluation of the intermolecular level structure of the complex.     

卤素阴离子和取代苯间Anion-π作用强度的快速计算

A scheme that explicitly contains electrostatic, polarization, and dispersion interactions to rapidly simulate anion-π interactions is proposed and assessed by structural and energetic comparison with those produced via the complete basis set limit of the coupled-cluster singles and doubles plus perturbative triples [CCSD (T)/CBS] method for a set of X-…C₆H_6-nR_n complexes where X^-=F^-, Cl^-, Br^- and R=CN, F. We use the chemical bonds C≡N, C―F, and C―H of the substituted benzenes as bond dipoles. The electrostatic interactions are estimated by calculating the interactions between the charge of the anion and the bond dipole moments of the substituted benzene. The polarization interactions are described according to the variation of the magnitudes of the bond dipole moments with the local environment. The parameters needed are produced by fitting the high-quality CCSD (T)/CBS potential energy curves. Calculation results show that our scheme produces equilibrium intermolecular distances with a root-mean-square deviation of 0.004 nm and interaction energies with a root-mean-square deviation of 2.81 kJ·mol^-1 compared with the CCSD (T)/CBS results. The calculation results also show that our scheme reproduces the CCSD (T)/CBS potential energy curves well. These comparisons indicate the scheme proposed here is accurate and efficient, suggesting it may be a helpful tool to design and simulate relevant molecular materials.     

Combined vacuum ultraviolet laser and synchrotron pulsed field ionization study of CH2BrCl

The pulsed field ionization-photoelectron (PFI-PE) spectrum of bromochloromethane (CH2BrCl) in the region of 85,320-88,200 cm-1 has been measured using vacuum ultraviolet laser. The vibrational structure resolved in the PFI-PE spectrum was assigned based on ab initio quantum chemical calculations and Franck-Condon factor predictions. At energies 0-1400 cm-1 above the adiabatic ionization energy (IE) of CH2BrCl, the Br-C-Cl bending vibration progression (nu1+=0-8) of CH2BrCl+ is well resolved and constitutes the major structure in the PFI-PE spectrum, whereas the spectrum at energies 1400-2600 cm-1 above the IE(CH2BrCl) is found to exhibit complex vibrational features, suggesting perturbation by the low lying excited CH2BrCl+(A 2A") state. The assignment of the PFI-PE vibrational bands gives the IE(CH2BrCl)=85,612.4+/-2.0 cm-1 (10.6146+/-0.0003 eV) and the bending frequencies nu1+(a1')=209.7+/-2.0 cm-1 for CH2BrCl+(X2A'). We have also examined the dissociative photoionization process, CH2BrCl+hnu-->CH2Cl++Br+e-, in the energy range of 11.36-11.57 eV using the synchrotron based PFI-PE-photoion coincidence method, yielding the 0 K threshold or appearance energy AE(CH2Cl+)=11.509+/-0.002 eV. Combining the 0 K AE(CH2Cl+) and IE(CH2BrCl) values obtained in this study, together with the known IE(CH2Cl), we have determined the 0 K bond dissociation energies (D0) for CH2Cl+-Br (0.894+/-0.002 eV) and CH2Cl-Br (2.76+/-0.01 eV). We have also performed CCSD(T, full)/complete basis set (CBS) calculations with high-level corrections for the predictions of the IE(CH2BrCl), AE(CH2Cl+), IE(CH2Cl), D0(CH2Cl+-Br), and D0(CH2Cl-Br). The comparison between the theoretical predictions and experimental determinations indicates that the CCSD(T, full)/CBS calculations with high-level corrections are highly reliable with estimated error limits of <17 meV.     

State of the art theoretical study and comparison to experiment for the phenol...argon complex

The phenol...argon complex was studied by means of various high level ab initio quantum mechanics methods and high resolution threshold ionization spectroscopy. The structure and stabilization energy of different conformers were determined. Stabilization energy of van der Waals bonded and H-bonded PhOH...Ar complex determined at CCSD(T) complete basis set (CBS) level for CP-RI-MP2/cc-pVTZ/Ar aug-cc-pVTZ geometries amount to 434 and 285 cm(-1). The CCSD(T)/CBS were constructed either as a sum of MP2/CBS interaction energy and CCSD(T) correction term [difference between CCSD(T) and MP2 correlation energies determined with medium basis set] or directly from CCSD(T)/aug-cc-pVDZ and aug-cc-pVTZ energies. Both schemes provide very similar values. Harmonic vibrational analysis revealed that the H-bonded structure does not represent energy minimum but first order transition structure. The respective imaginary vibrational mode (16 cm(-1)) connects two possible argon locations -- above and below the phenol aromatic ring. Including the DeltaZPVE, we obtained stabilization enthalpy at 0 K of 389 cm(-1). This value is marginally higher (25-35 cm(-1), 0.07-0.10 kcal/mol) than the experimental value. The determination of DeltaZPVE constitutes the most significant error and possible improvements should come from more accurate evaluation of the (nonharmonic) vibrational frequencies.     

Accurate ab initio predictions of ionization energies of hydrocarbon radicals: CH2, CH3, C2H, C2H3, C2H5, C3H3, and C3H5

The ionization energies for methylene (CH2), methyl (CH3), ethynyl (C2H), vinyl (C2H3), ethyl (C2H5), propargyl (C3H3), and allyl (C3H5) radicals have been calculated by the wave-function-based ab initio CCSD(T)/CBS approach, which involves the approximation to the complete basis set (CBS) limit at the coupled-cluster level with single and double excitations plus a quasiperturbative triple excitation [CCSD(T)]. When it is appropriate, the zero-point vibrational energy correction, the core-valence electronic correction, the scalar relativistic effect correction, the diagonal Born-Oppenheimer correction, and the high-order correlation correction have also been made in these calculations. The comparison between the computed ionization energy (IE) values and the highly precise experimental IE values determined in previous pulsed field ionization-photoelectron (PFI-PE) studies indicates that the CCSD(T)/CBS method is capable of providing accurate IE predictions for these hydrocarbon radicals achieving error limits well within +/-10 meV. The benchmarking of the CCSD(T)/CBS IE predictions by the PFI-PE experimental results also lends strong support for the conclusion that the CCSD(T)/CBS approach with high-level energy corrections can serve as a valuable alternative for reliable IE determination of radicals, particularly for those radicals with very unfavorable Franck-Condon factors for photoionization transitions near their ionization thresholds.     

Halogen bonds with benzene: An assessment of DFT functionals

The performance of an extensive set of density functional theory functionals has been tested against CCSD(T) and MP2 results, extrapolated to the complete basis set (CBS) limit, for the interaction of either DCl or DBr (D = H, HCC, F, and NC) with the aromatic system of benzene. It was found that double hybrid functionals explicitly including dispersion, that is, B2PLYPD and mPW2PLYPD, provide the better agreement with the CCSD(T)/CBS results on both energies and equilibrium geometry, indicating the importance of dispersive contributions in determining this interaction. Among the less expensive functionals, the better performance is provided by the ωB97X and M062X functionals, while the ωB97XD and B97D functionals are shown to work very well for bromine complexes but not so well for chlorine complexes. © 2013 Wiley Periodicals, Inc.