Genotyping of single nucleotide polymorphisms by primer extension reaction and a dual-analyte bio/chemiluminometric assay

Primer extension reaction (PEXT) is the most widely used approach to genotyping of single nucleotide polymorphisms (SNP). It is based on the high accuracy of nucleotide incorporation by the DNA polymerase. We propose a dual-analyte bio/chemiluminometric method for the simultaneous detection of the PEXT reaction products of the normal and mutant allele in a high sample-throughput format. PCR-amplified DNA fragments that span the SNP of interest are subjected to two PEXT reactions using normal and mutant primers in the presence of digoxigenin-dUTP and biotin-dUTP. Both primers contain a d(A)₃₀ segment at the 5′-end but differ in the final nucleotide at the 3′-end. Under optimized conditions only the primer that is perfectly complementary with the interrogated DNA will be extended by DNA polymerase and lead to a digoxigenin- or biotin-labeled product. The products of the PEXT reactions are mixed, denatured, and captured in microtiter wells through hybridization with immobilized oligo(dT) strands. Detection is performed by adding a mixture of antidigoxigenin–alkaline phosphatase (ALP) conjugate and a streptavidin–aequorin conjugate. The flash-type bioluminescent reaction of aequorin is triggered by the addition of Ca²⁺. ALP is then measured by adding the appropriate chemiluminogenic substrate. The method was evaluated by genotyping two SNPs of the human mannose-binding lectin gene (MBL2) and one SNP of the cytochrome P450 gene CYP2D6. Patient genotypes showed 100% concordance with direct DNA sequencing data.     

The 2-Amino Group of 8-Aza-7-deaza-7-bromopurine-2,6-diamine and Purine-2,6-diamine as Stabilizer for the Adenine–Thymine Base Pair in Heterochiral DNA with Strands in Anomeric Configuration

Stabilization of DNA is beneficial for many applications in the fields of DNA therapeutics, diagnostics, and materials science. Now, this phenomenon is studied on heterochiral DNA, an autonomous DNA recognition system with complementary strands in α-D and β-D configuration showing parallel strand orientation. The 12-mer heterochiral duplexes were constructed from anomeric (α/β-D) oligonucleotide single-strands. Purine-2,6-diamine and 8-aza-7-deaza-7-bromopurine-2,6-diamine 2′-deoxyribonucleosides having the capability to form tridentate base pairs with dT were used to strengthen the stability of the dA–dT base pair. T_m data and thermodynamic values obtained from UV melting profiles indicated that the 8-aza-7-deaza 2′-deoxyribonucleoside decorated with a bromo substituent is so far the most efficient stabilizer for heterochiral DNA. Compared with that, the stabilizing effect of the purine-2,6-diamine 2′-deoxyribonucleoside is low. Global changes of helix structures were identified by circular dichroism (CD) spectra during melting.     

Carbon nano-strings as reporters in lateral flow devices for DNA sensing by hybridization

Presently, there is a growing interest in the development of lateral flow devices for nucleic acid analysis that enable visual detection of the target sequence (analyte) while eliminating several steps required for pipetting, incubation, and washing out the excess of reactants. In this paper, we present, for the first time, lateral flow tests exploiting oligonucleotide-functionalized and antibody-functionalized carbon nanoparticles (carbon nano-strings, CBNS) as reporters that enable confirmation of the target DNA sequence by hybridization. The CBNS reporters were applied to (a) the detection of PCR products and (b) visual genotyping of single nucleotide polymorphisms in human genomic DNA. Biotinylated PCR product was hybridized with a dA-tailed probe. In one assay configuration, the hybrid is captured at the test zone of the strip by immobilized streptavidin and detected by (dT) ₃₀ -CBNS. In a second configuration, the hybrids are captured from immobilized (dA) strands and detected by antibiotin-CBNS. As low as 2.5 fmol of amplified DNA can be detected. For visual genotyping, allele-specific primers with a 5′ oligo(dA) segment are extended by DNA polymerase with a concomitant incorporation of biotin moieties. Extension products are detected either by (dT) ₃₀ -CBNS or by antibiotin-CBNS. Only three cycles of extension reaction are sufficient for detection. No purification of the PCR products or the extension product is required.     

pH‐Independent Recognition of the dG ⋅ dC Base Pair in Triplex DNA: 9‐Deazaguanine N7‐(2′‐Deoxyribonucleoside) and Halogenated Derivatives Replacing Protonated dC

Triplex-forming oligonucleotides (TFOs) containing 9-deazaguanine N⁷-(2′-deoxyribonucleoside) 1a and halogenated derivatives 1b,c were synthesized employing solid-phase oligonucleotide synthesis. For that purpose, the phosphoramidite building blocks 5a – c and 8a – c were synthesized. Multiple incorporations of 1a – c in place of dC were performed within TFOs, which involved the sequence of five consecutive 1a – c ⋅ dG ⋅ dC triplets as well as of three alternating 1a – c ⋅ dG ⋅ dC and dT ⋅ dA ⋅ dT triplets. These TFOs were designed to bind in a parallel orientation to the target duplex. Triplex forming properties of these oligonucleotides containing 1a – c in the presence of Na⁺ and Mg²⁺ were studied by UV/melting-curve analysis and confirmed by circular-dichroism (CD) spectroscopy. The oligonucleotides containing 1a in the place of dC formed stable triplexes at physiological pH in the case of sequence of five consecutive 1a ⋅ dG ⋅ dC triplets as well as three alternating 1a – c ⋅ dG ⋅ dC and dT ⋅ dA ⋅ dT triplets. The replacement of 1a by 9-halogenated derivatives 1b,c further enhanced the stability of DNA triplexes. Nucleosides 1a – c also stabilized duplex DNA.     

Triple Amplification Strategy for the Improved Efficiency of a Microplate-Based Assay for the Chemiluminescent Detection of DNA

Significant research efforts are currently focused on advancing DNA detection methodology. Various nanoparticles (NPs), which are currently the most widely used solid-phase carriers for nucleic acid assays, have a number of essential drawbacks. Microtiter plates provide a simple and economical alternative to the NPs. This article reports the development of a sandwich assay for DNA detection using a microtiter plate as the solid carrier. A capture oligonucleotide modified with fluorescein was bound to the anti-fluorescein antibody adsorbed on the polystyrene microplate surface. A hepatitis B virus DNA fragment was used as the model analyte. To improve the assay sensitivity, the biotinylated reporter oligonucleotide and streptavidin-horseradish polyperoxidase (polyHRP) conjugate were used to provide an amplified detection system. Additional amplification was achieved because the peroxidase activity was measured by a chemiluminescent method using the 3-(10′-phenothiazinyl)propane-1-sulfonate/N-morpholinopyridine pair as an enhancing reagent. The detection limit of the developed assay was 0.9?pM with a linear dynamic range from 0.9 to 100?pM. This method may be used as a platform for the development of sensitive DNA assays.     

pH Dependent Thermal Stabilization of DNA by Glcβ(1→3)GlcNAcβ1→STol

A disaccharide, Glcβ(1→3)GlcNAcβ1→STol (GGS, 1 ), was synthesized and demonstrated to stabilize ct‐DNA during the denaturing process. GGS at 50 μM shifted T_m of ct‐DNA by 23 °C and the behavior was pH dependent. Poly(dA‐dT)₂ was found to be the preferable type of DNA for GGS stabilization by circular dichroism spectroscopy study.     

Brownian dynamics simulations of the reactions of hydrated electrons with components of DNAs and a DNA double-helix

As a first step toward developing simulation models for studying the indirect mechanism of radiation damage to DNAs, we have carried out Brownian dynamics simulations to study the reactions of hydrated electrons with a 12-base-pair B-DNA, (dA)₁₂(dT)₁₂, and with bases, monodeoxynucleotides, and polydeoxynucleotides. We first studied in detail the sensitivity of diffusion reaction rate constants to different model and simulation parameters. Based on the sensitivity studies, a set of model and simulation parameters was obtained for the final production runs. The use of this set of parameters reduced the computational costs but delivered reasonably reliable results. The calculated reaction rate constants were in qualitative agreement with experiments. For the DNA double-helix, (dA)₁₂(dT)₁₂, the simulations demonstrated that hydrated electrons preferred to attack the two ends of the double-helix. Electrostatic interactions between the DNA and the hydrated electrons make the T strand more susceptible to attack than the A strand. The increased reactivity of the T strand due to electrostatic interactions results from the increased reactivity of the C6 sites of the thymine bases, at the expense of the reactivity of the C8 sites of the adenine bases. The reactivity of the relatively buried reactive sites of the adenine and thymine bases are less affected by electrostatic interactions. © 1997 by John Wiley & Sons, Inc. J Comput Chem 18: 888–901, 1997     

Theoretical study of the interaction of tetramethylammonium with double-stranded oligonucleotides

Computations are performed on the interaction specificities of tetramethylammonium (TMA) for double-stranded oligonucleotides held in the B conformation. The effects of base sequence and chain length are investigated. In the short oligomers (helices formed from dinucleoside monophosphates and trinucleoside diphosphates), the interaction energies of TMA are larger in the major groove of (dG)_n · (dC)_n than in the minor groove of either (dA)_n · (dT)_n or (dA—dT)_n. Upon lengthening the oligomers, and owing to the gradual shaping of the grooves of the helix and cumulative effect of the phosphates, TMA is shown to increasingly favor the minor groove of (dA)_n · (dT)_n with respect to the major groove of (dG)_n · (dC)_n, with a sizeable energy difference computed at the pentanucleoside hexaphosphate level. The binding of TMA in the minor groove of (dA)_n · (dT)_n involves stabilizing contacts with several sites, on the bases and on the deoxyriboses. Configurations locating the cation closer to the thymine strand are slightly preferred over configurations locating it closer to the adenine strand.     

Sequence-Specific Spin Labeling of Oligothymidylates by Phosphotriester Chemistry

Oligothymidylates (oligo(dT)'s) with the sequence-specifically-incorporated one-atom-tethered C(5)-nitio-xide-labeled nucleoside 1 were synthesized by the phosphotriester method. Some modifications of the protocol were required to account for the chemical reactivity of the nitroxide, the stability of which was monitored during the synthesis by electron paramagnetic resonance (EPR) spectroscopy. The EPR specific activity (A_EPR) of the FPLC-purified nitroxide-labeled oligomers was determined and found to be in agreement with enzymatically prepared spin-labeled nucleic acids. Annealing the nitroxide-labeled oligo(dT)'s to (dA)_n or oligo(dA) resulted in different EPR-lineshape changes suggesting a strong coupling of the short-tethered nitroxide to global macro-molecular motion.     

MECHANISMS OF QUENCHING OF THE FLUORESCENCE OF A BENZO[a]PYRENE TETRAOL METABOLITE MODEL COMPOUND BY 2'-DEOXYNUCLEOSIDES

Abstract— The hydrophobic interactions of bulky polycyclic aromatic hydrocarbons with nucleic acid bases and the formation of noncovalent complexes with DNA are important in the expressions of the mutagenic and carcinogenic potentials of this class of compounds. The fluorescence of the polycyclic aromatic residues can be employed as a probe of these interactions. In this work, the interactions of the (+)-trans stereoisomer of the tetraol 7,8,9,10-tetrahydroxytetrahydrobenzo[a]pyrene (BPT), a hydrolysis product of a highly mutagenic and carcinogenic diol epoxide derivative of benzo[a]pyrene, were studied with 2′-deoxynucleosides in aqueous solution by fluorescence and UV spectroscopic techniques. Ground-state complexes between BPT and the purine derivatives 2′-deoxyguanosine (dG), 2′-deoxyadenosine (dA), and 2′-deoxyinosine (dI) are formed with association constants in the range of ～40–130 M^?1 Complex formation with the pyrimidine derivatives 2′-deoxythymidine (dT), 2′-deoxycytidine (dC), and 2′-deoxyuridine (dU) is significantly weaker. Whereas dG is a strong quencher of the fluorescence of BPT by both static and dynamic mechanisms (dynamic quenching rate constant k_dyn= [2.5 ± 0.41 × 10⁹M¹ s ¹, which is close to the estimated diffusion-controlled value of ～ 5 × 10⁹M^{? 1} s^?1), both dA and dI are weak quenchers and form fluorescenceemitting complexes with BPT. The pyrimidine derivatives dC, dU, and dT are efficient dynamic fluorescence quenchers (K_dyn～ [1.5–3.0] × 10⁹M^?1 s^?1), with a small static quenching component due to complex formation evident only in the case of dT. None of the four nucleosidcs dG, dA, dC and dT are dynamic quenchers of BPT in the triplet excited state; the observed lower yields of triplets are attributed to the quenching of single excited states of BPT by 2′-deoxynucleosides without passing through the triplet manifold of BPT. Possible fluorescence quenching mechanisms involving photoinduced electron transfer are discussed. The strong quenching of the fluorescence of BPT by dG, dC and dT accounts for the low fluorescence yields of BPT-native DNA and of pyrene-DNA complexes.     

Prediction of DNA far-IR absorption spectra based on normal mode analysis

 We present a computational method which couples normal mode analysis in internal coordinates of a molecule with very far IR spectroscopy. The analytical expression for the dependence of IR absorption on frequency incorporates frequencies and optical activities of each normal mode. In order to predict far-IR spectra of a molecule we evaluate the optical activity of each normal mode. This optical activity is determined by the vibration amplitude of the dipole moment produced by a normal mode. We calculated normal modes of DNA double-helical fragments (dA)₁₂ · (dT)₁₂ and (dA-dT)₆ · (dA-dT)₆ and evaluated their optical activities. These were found to be very sensitive to the DNA base-pair sequence. The positions of the resonance peaks in the calculated absorption spectrum of (dA)₁₂ · (dT)₁₂ are in a good agreement with those obtained by Fourier transform IR spectroscopy (Powell JW et al. 1987 Phys Rev A 35: 3929–3939). Received: 20 June 2000 / Accepted: 5 January 2001/ Published online: 3 May 2001     

Site‐Directed Spin‐Labeling of DNA by the Azide–Alkyne ‘Click’ Reaction: Nanometer Distance Measurements on 7‐Deaza‐2′‐deoxyadenosine and 2′‐Deoxyuridine Nitroxide Conjugates Spatially Separated or Linked to a ‘dA‐dT’ Base Pair

Nucleobase‐directed spin‐labeling by the azide‐alkyne ‘click’ (CuAAC) reaction has been performed for the first time with oligonucleotides. 7‐Deaza‐7‐ethynyl‐2′‐deoxyadenosine ( 1 ) and 5‐ethynyl‐2′‐deoxyuridine ( 2 ) were chosen to incorporate terminal triple bonds into DNA. Oligonucleotides containing 1 or 2 were synthesized on a solid phase and spin labeling with 4‐azido‐2,2,6,6‐tetramethylpiperidine 1‐oxyl (4‐azido‐TEMPO, 3 ) was performed by post‐modification in solution. Two spin labels ( 3 ) were incorporated with high efficiency into the DNA duplex at spatially separated positions or into a ‘dA‐dT’ base pair. Modification at the 5‐position of the pyrimidine base or at the 7‐position of the 7‐deazapurine residue gave steric freedom to the spin label in the major groove of duplex DNA. By applying cw and pulse EPR spectroscopy, very accurate distances between spin labels, within the range of 1–2 nm, were measured. The spin–spin distance was 1.8±0.2 nm for DNA duplex 17 ( dA*^7,10 ) ?11 containing two spin labels that are separated by two nucleotides within one individual strand. A distance of 1.4±0.2 nm was found for the spin‐labeled ‘dA‐dT’ base pair 15 ( dA*⁷ ) ?16 ( dT*⁶ ). The ‘click’ approach has the potential to be applied to all four constituents of DNA, which indicates the universal applicability of the method. New insights into the structural changes of canonical or modified DNA are expected to provide additional information on novel DNA structures, protein interaction, DNA architecture, and synthetic biology.     

8-Aza-7-deazaadenine N8- and N8-(β-D-2′-Deoxyribofuranosides): Building blocks for automated DNA synthesis and properties of oligodeoxyribonucleotides

Oligonucleotides with alternating 8-aza-7-deaza-2′-deoxyadenosine (= c⁷z⁸A_d2) and dT residues (see 11, 14 and 16 ) or 4-aminopyrazolo [3,4-d] pyrimidine N²-(β-D -2′-deoxyribofuranoside) (= c⁷z⁸A′_d¹); ( 3 ) and dT residues (see 12 ) have been prepared by solid-phase synthesis using P(III) chemistry, Additionally, palindromic oligomers derived from d(C-T-G-G-A-T-C-C-A-G) but containing 2 or 3 instead of dA (see 18 – 22 ) have been synthesized. Benzoylation of 2 or 3 , followed by 4,4′-dimethoxytritylation and subsequent phosphitylation yielded the methyl or the cyanoethyl phosphoramidites 8a,b and 9 . They were employed in automated. DNA synthesis. Alternating oligomers containing 2 or 3 showed increase dT_m values compared to those with dA, in particular 12 with an unusual N²-glycosylic bond. The palindromic oligomers 18 - 22 containing 2 or 3 instead of dA outside of the enzymic recognition side reduced the hydrolysis rate, replacement within d(G-A-T-C) abolished phosphodiester hydrolysis.     

Sequence-specific control of azobenzene assemblies by molecular recognition of DNA

We investigated the molecular recognition between the amphiphile AzoAde, which is composed of azobenzene in the hydrophobic and adenine in the hydrophilic portion of the molecule, and oligonucleotides having a homogeneous base (dA30, dT30, dG30, and dC30) at the air-water interface. On the basis of the complementary base-pairing of DNA in the duplex, orderly arrangement of AzoAde on templated dT30 was examined using pi-A isotherm, UV-vis RAS, FT-IR RAS, and XPS measurements. Although there was little interaction between AzoAde and mismatched oligonucleotides (dA30, dG30, and dC30), AzoAde prepared on a dT30 subphase stoichiometrically assembled and interacted with dT30, subsequently forming a J-form assembly at the air-water interface. AFM observation of the LB films revealed the nanostructure of the J-formed AzoAde monolayer on the dT30 subphase as well as the domain structures of the H-formed monolayers on the other oligonucleotide subphases. Therefore, dT30 has a potential application as a template for assembling AzoAde at the air-water interface.     

Silver Ions in Non‐canonical DNA Base Pairs: Metal‐Mediated Mismatch Stabilization of 2′‐Deoxyadenosine and 7‐Deazapurine Derivatives with 2′‐Deoxycytidine and 2′‐Deoxyguanosine

Novel silver‐mediated dA?dC, dA*?dC, and dA*?dG base pairs were formed in a natural DNA double helix environment (dA* denotes 7‐deaza‐dA, 7‐deaza‐7‐iodo‐dA, and 7‐cyclopropyl‐7‐deaza‐dA). 7‐Deazapurine nucleosides enforce silver ion binding and direct metal‐mediated base pair formation to their Watson–Crick face. New phosphoramidites were prepared from 7‐deaza‐dA, 7‐deaza‐7‐iodo‐dA, and 7‐cyclopropyl‐7‐deaza‐dA, which contain labile isobutyryl protecting groups. Solid‐phase synthesis furnished oligonucleotides that contain mismatches in near central positions. Increased thermal stabilities (higher T_m values) were observed for oligonucleotide duplexes with non‐canonical dA*?dC and dA?dC pairs in the presence of silver ions. The stability of the silver‐mediated base pairs was pH dependent. Silver ion binding was not observed for the dA?dG mismatch but took place when mismatches were formed between 7‐deazaadenine and guanine. The specific binding of silver ions was confirmed by stoichiometric UV titration experiments, which proved that one silver ion is captured by one mismatch. The stability increase of canonical DNA mismatches might have an impact on cellular DNA repair.     

Exploring concerted effects of base pairing and stacking on the excited‐state nature of DNA oligonucleotides by DFT and TD‐DFT studies

We have taken (dA)₅, (dT)₅, and (dA)₅·(dT)₅ as model systems to study concerted effects of base pairing and stacking on excited‐state nature of DNA oligonucleotides using density functional theory (DFT) and time dependent DFT methods. The spectroscopic states are determined to be of a partial A → A charge‐transfer nature in the A·T oligonucleotides. The T → T charge‐transfer transitions produce dark states, which are hidden in the energy region of the steady‐state absorption spectra. This is different from the previous assignment that the T → T charge‐transfer transition is responsible for a shoulder at the red side of the first strong absorption band. The A → T charge‐transfer states were predicted to have relatively high energies in the A·T oligonucleotides. The present calculations predict that the T → A charge‐transfer states are not involved in the spectra and excited‐state dynamics of the A·T oligonucleotides. In addition, the influence of base pairing and stacking on the nature of the ¹nπ* and ¹ππ* states are discussed in detail. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Neomycin-neomycin dimer: an all-carbohydrate scaffold with high affinity for AT-rich DNA duplexes

A dimeric neomycin-neomycin conjugate 3 with a flexible linker, 2,2'-(ethylenedioxy)bis(ethylamine), has been synthesized and characterized. Dimer 3 can selectively bind to AT-rich DNA duplexes with high affinity. Biophysical studies have been performed between 3 and different nucleic acids with varying base composition and conformation by using ITC (isothermal calorimetry), CD (circular dichroism), FID (fluorescent intercalator displacement), and UV (ultraviolet) thermal denaturation experiments. A few conclusions can be drawn from this study: (1) FID assay with 3 and polynucleotides demonstrates the preference of 3 toward AT-rich sequences over GC-rich sequences. (2) FID assay and UV thermal denaturation experiments show that 3 has a higher affinity for the poly(dA)·poly(dT) DNA duplex than for the poly(dA)·2poly(dT) DNA triplex. Contrary to neomycin, 3 destabilizes poly(dA)·2poly(dT) triplex but stabilizes poly(dA)·poly(dT) duplex, suggesting the major groove as the binding site. (3) UV thermal denaturation studies and ITC experiments show that 3 stabilizes continuous AT-tract DNA better than DNA duplexes with alternating AT bases. (4) CD and FID titration studies show a DNA binding site size of 10-12 base pairs/drug, depending upon the structure/sequence of the duplex for AT-rich DNA duplexes. (5) FID and ITC titration between 3 and an intramolecular DNA duplex [d(5'-A(12)-x-T(12)-3'), x = hexaethylene glycol linker] results in a binding stoichiometry of 1:1 with a binding constant ～10(8) M(-1) at 100 mM KCl. (6) FID assay using 3 and 512 hairpin DNA sequences that vary in their AT base content and placement also show a higher binding selectivity of 3 toward continuous AT-rich than toward DNA duplexes with alternate AT base pairs. (7) Salt-dependent studies indicate the formation of three ion pairs during binding of the DNA duplex d[5'-A(12)-x-T(12)-3'] and 3. (8) ITC-derived binding constants between 3 and DNA duplexes have the following order: AT continuous, d[5'-G(3)A(5)T(5)C(3)-3'] > AT alternate, d[5'-G(3)(AT)(5)C(3)-3'] > GC-rich d[5'-A(3)G(5)C(5)T(3)-3']. (9) 3 binds to the AT-tract-containing DNA duplex (B* DNA, d[5'-G(3)A(5)T(5)C(3)-3']) with 1 order of magnitude higher affinity than to a DNA duplex with alternating AT base pairs (B DNA, d[5'-G(3)(AT)(5)C(3)-3']) and with almost 3 orders of magnitude higher affinity than a GC-rich DNA (A-form, d[5'-A(3)G(5)C(5)T(3)-3']).