Structural Basis for the Identification of an i‐Motif Tetraplex Core with a Parallel‐Duplex Junction as a Structural Motif in CCG Triplet Repeats

CCG triplet repeats can fold into tetraplex structures, which are associated with the expansion of (CCG)_n trinucleotide sequences in certain neurological diseases. These structures are stabilized by intertwining i‐motifs. However, the structural basis for tetraplex i‐motif formation in CCG triplet repeats remains largely unknown. We report the first crystal structure of a CCG‐repeat sequence, which shows that two dT(CCG)₃A strands can associate to form a tetraplex structure with an i‐motif core containing four C:C⁺ pairs flanked by two G:G homopurine base pairs as a structural motif. The tetraplex core is attached to a short parallel‐stranded duplex. Each hairpin itself contains a central CCG loop in which the nucleotides are flipped out and stabilized by stacking interactions. The helical twists between adjacent cytosine residues of this structure in the i‐motif core have an average value of 30°, which is greater than those previously reported for i‐motif structures.     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.     

Mixed Oligoureas Based on Constrained Bicyclic and Acyclic β‐Amino Acids Derivatives: On the Significance of the Subunit Configuration for Folding

The combination of a non‐functionalized constrained bicyclo[2.2.2]octane motif along with urea linkages allowed the formation of a highly rigid 2.5_12/14 helical system both in solution and the solid state. In this work, we aimed at developing stable and functionalized systems as promising materials for biological applications in investigating the impact of this constrained motif and its configuration on homo and heterochiral mixed‐oligourea helix formation. Di‐, tetra‐, hexa‐, and octa‐oligoureas alternating the highly constrained bicyclic motif of (R) or (S) configuration with acyclic (S)‐β³‐amino acid derivatives were constructed. Circular dichroism (CD), NMR experiments, and the X‐ray crystal structure of the octamer unequivocally proved that the alternating heterochiral R/S sequences form a stable left‐handed 2.5‐helix in contrast to the mixed (S/S)‐oligoureas, which did not adopt any defined secondary structure. We observed that the (?)‐synclinal conformation around the C_α? C_β bond of the acyclic residues, although sterically less favorable than the (+)‐synclinal conformation, was imposed by the (R)‐bicyclic amino carbamoyl (BAC) residue. This highlighted the strong ability of the BAC residue to drive helical folding in heterochiral compounds. The role of the stereochemistry of the BAC unit was assessed and a model was proposed to explain the misfolding of the S/S sequences.     

The 2‐Cyano‐2,2‐dimethylethanimine‐N‐oxymethyl Group for the 2′‐Hydroxyl Protection of Ribonucleosides in the Solid‐Phase Synthesis of RNA Sequences

The reaction of 2‐cyano‐2‐methyl propanal with 2′‐O‐aminooxymethylribonucleosides leads to stable and yet reversible 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl)ribonucleosides. Following N‐protection of the nucleobases, 5′‐dimethoxytritylation and 3′‐phosphitylation, the resulting 2′‐protected ribonucleoside phosphoramidite monomers are employed in the solid‐phase synthesis of three chimeric RNA sequences, each differing in their ratios of purine/pyrimidine. When the activation of phosphoramidite monomers is performed in the presence of 5‐benzylthio‐1H‐tetrazole, coupling efficiencies averaging 99 % are obtained within 180 s. Upon completion of the RNA‐chain assemblies, removal of the nucleobase and phosphate protecting groups and release of the sequences from the solid support are carried out under standard basic conditions, whereas the cleavage of 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl) protective groups is effected (without releasing RNA alkylating side‐products) by treatment with tetra‐n‐butylammonium fluoride (0.5 m) in dry DMSO over a period of 24–48 h at 55 °C. Characterization of the fully deprotected RNA sequences by polyacrylamide gel electrophoresis (PAGE), enzymatic hydrolysis, and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry confirmed the identity and quality of these sequences. Thus, the use of 2′‐O‐aminooxymethylribonucleosides in the design of new 2′‐hydroxyl protecting groups is a powerful approach to the development of a straightforward, efficient, and cost‐effective method for the chemical synthesis of high‐quality RNA sequences in the framework of RNA interference applications.     

Enzyme‐Mediated Endogenous and Bioorthogonal Control of a DNAzyme Fluorescent Sensor for Imaging Metal Ions in Living Cells

Bioorthogonal control of metal‐ion sensors for imaging metal ions in living cells is important for understanding the distribution and fluctuation of metal ions. Reported here is the endogenous and bioorthogonal activation of a DNAzyme fluorescent sensor containing an 18‐base pair recognition site of a homing endonuclease (I‐SceI), which is found by chance only once in 7×10¹⁰ bp of genomic sequences, and can thus form a near bioorthogonal pair with I‐SceI for DNAzyme activation with minimal effect on living cells. Once I‐SceI is expressed inside cells, it cleaves at the recognition site, allowing the DNAzyme to adopt its active conformation. The activated DNAzyme sensor is then able to specifically catalyze cleavage of a substrate strand in the presence of Mg²⁺ to release the fluorophore‐labeled DNA fragment and produce a fluorescent turn‐on signal for Mg²⁺. Thus I‐SceI bioorthogonally activates the 10–23 DNAzyme for imaging of Mg²⁺ in HeLa cells.     

An Aggregating Amphiphilic Squaraine: A Light‐up Probe That Discriminates Parallel G‐Quadruplexes

G‐quadruplexes (G4s) are peculiar DNA or RNA tertiary structures that are involved in the regulation of many biological events within mammalian cells, bacteria, and viruses. Although their role as versatile therapeutic targets has been emphasized for 35 years, G4 selectivity over ubiquitous double‐stranded DNA/RNA, as well as G4 differentiation by small molecules, still remains challenging. Here, a new amphiphilic dicyanovinyl‐substituted squaraine, SQgl , is reported to act as an NIR fluorescent light‐up probe discriminating an extensive panel of parallel G4s while it is non‐fluorescent in the aggregated state. The squaraine can form an unconventional sandwich π‐complex binding two quadruplexes, which leads to a strongly fluorescent (Φ _F=0.61) supramolecular architecture. SQgl is highly selective against non‐quadruplex and non‐parallel G4 sequences without altering their topology, as desired for applications in selective in vivo high‐resolution imaging and theranostics.     

Modular Synthesis of Nona‐Decasaccharide Motif from Psidium guajava Polysaccharides: Orthogonal One‐Pot Glycosylation Strategy

The synthesis of long, branched, and complex carbohydrate sequences remains a challenging task in chemical synthesis. Reported here is an efficient and modular one‐pot synthesis of a nona‐decasaccharide and shorter sequences from Psidium guajava polysaccharides, which have the potent α‐glucosidase inhibitory activity. The synthetic strategy features: 1) several one‐pot glycosylation reactions on the basis of N‐phenyltrifluoroacetimidate (PTFAI) and Yu glycosylation to streamline the chemical synthesis of oligosaccharides, 2) the successful and efficient assembly sequences (first O3′, second O5′, final O2′) toward the challenging 2,3,5‐branched Araf motif, 3) the stereoselective 1,2‐cis‐glucosylation by reagent control, and 4) the convergent [6+6+7] one‐pot coupling reaction for the final assembly of the target nona‐decasaccharide. This orthogonal one‐pot glycosylation strategy can streamline the chemical synthesis of long, branched, and complicated carbohydrate chains.     

A Non‐Invasive NMR Method Based on Histidine Imidazoles to Analyze the pH‐Modulation of Protein–Nucleic Acid Interfaces

A useful ²J(N?H) coupling‐based NMR spectroscopic approach is proposed to unveil, at the molecular level, the contribution of the imidazole groups of histidines from RNA/DNA‐binding proteins on the modulation of binding to nucleic acids by pH. Such protonation/deprotonation events have been monitored on the single His96 located at the second RNA/DNA recognition motif (RRM2) of T‐cell intracellular antigen‐1 (TIA‐1) protein. The pK_a values of the His96 ionizable groups were substantially higher in the complexes with short U‐rich RNA and T‐rich DNA oligonucleotides than those of the isolated TIA‐1 RRM2. Herein, the methodology applied to determine changes in pK_a of histidine side chains upon DNA/RNA binding, gives valuable information to understand the pH effect on multidomain DNA/RNA‐binding proteins that shuttle among different cellular compartments.     

Comparative Analysis of GPCR Crystal Structures†

The phototransduction cascade is perhaps the best understood model system for G protein‐coupled receptor (GPCR) signaling. Phototransduction links the absorption of a single photon of light to a decrease in cytosolic cGMP. Depletion of the cGMP pool induces closure of cGMP‐gated cation channels resulting in the hyperpolarization of photoreceptor cells and consequently a neuronal response. Many biochemical and both low‐ and high‐resolution structural approaches have been utilized to increase our understanding of rhodopsin, the key molecule of this signaling cascade. Rhodopsin, a member of the GPCR or seven‐transmembrane spanning receptor superfamily, is composed of a chromophore, 11‐cis‐retinal that is covalently bound by a protonated Schiff base linkage to the apo‐protein opsin at Lys²⁹⁶ (in bovine opsin). Upon absorption of a photon, isomerization of the chromophore to an all‐trans‐retinylidene conformation induces changes in the rhodopsin structure, ultimately converting it from an inactive to an activated state. This state allows it to activate the heterotrimeric G protein, transducin, by triggering nucleotide exchange. To fully understand the structural and functional aspects of rhodopsin it is necessary to critically examine crystal structures of its different photointermediates. In this review we summarize recent progress on the structure and activation of rhodopsin in the context of other GPCR structures.     

Heterologous expression of human cytochrome P450 (CYP) 2C19 in Escherichia coli and establishment of RP‐HPLC method to serve as activity marker

In this study, a simple and reliable reverse‐phase high‐performance liquid chromatography (RP‐HPLC) method was established and validated to analyze S‐mephenytoin 4‐hydroxylase activity of a recombinant CYP2C19 system. This system was obtained by co‐expressing CYP2C19 and NADPH‐CYP oxidoreductase (OxR) proteins in Escherichia coli (E. coli) cells. In addition to RP‐HPLC, the expressed proteins were evaluated by immunoblotting and reduced CO difference spectral scanning. The RP‐HPLC assay showed good linearity (r² = 1.00) with 4‐hydroxymephenytoin concentration from 0.100 to 50.0 μm and the limit of detection was 5.00 × 10^?2 μm . Intraday and interday precisions determined were from 1.90 to 8.19% and from 2.20 to 14.9%, respectively. Recovery and accuracy of the assay were from 83.5 to 85.8% and from 95.0 to 105%. Enzyme kinetic parameters (K_m, V_max and K_i) were comparable to reported values. The presence of CYP2C19 in bacterial membranes was confirmed by immunoblotting and the characteristic absorbance peak at 450 nm was determined in the reduced CO difference spectral assay. Moreover, the activity level of co‐expressed OxR was found to be comparable to that of the literature. As a conclusion, the procedures described here have generated catalytically active CYP2C19 and the RP‐HPLC assay developed is able to serve as CYP2C19 activity marker for pharmacokinetic drug interaction study in vitro. Copyright © 2013 John Wiley & Sons, Ltd.     

Recognition of essential purines by the U1A protein

Background  

The RNA recognition motif (RRM) is one of the largest families of RNA binding domains. The RRM is modulated so that individual proteins containing RRMs can specifically recognize RNA targets with diverse sequences and structures. Understanding the principles governing this specificity will be important for the rational modification and design of RRM-RNA complexes.     

Enzymatic Engineering of Live Bacterial Cell Surfaces Using Butelase 1

Butelase‐mediated ligation (BML) can be used to modify live bacterial cell surfaces with diverse cargo molecules. Surface‐displayed butelase recognition motif NHV was first introduced at the C‐terminal end of the anchoring protein OmpA on E. coli cells. This then served as a handle of BML for the functionalization of E. coli cell surfaces with fluorescein and biotin tags, a tumor‐associated monoglycosylated peptide, and mCherry protein. The cell‐surface ligation reaction was achieved at low concentrations of butelase and the labeling substrates. Furthermore, the fluorescein‐labeled bacterial cells were used to show the interactions with cultured HeLa cells and with macrophages in live transgenic zebrafish, capturing the latter's powerful phagocytic effect in action. Together these results highlight the usefulness of butelase 1 in live bacterial cell surface engineering for novel applications.     

The Thiophene “Sigma‐Hole” as a Concept for Preorganized,Specific Recognition of G⋅C Base Pairs in the DNA Minor Groove

In spite of its importance in cell function, targeting DNA is under‐represented in the design of small molecules. A barrier to progress in this area is the lack of a variety of modules that recognize G ? C base pairs (bp) in DNA sequences. To overcome this barrier, an entirely new design concept for modules that can bind to mixed G ? C and A ? T sequences of DNA is reported herein. Because of their successes in biological applications, minor‐groove‐binding heterocyclic cations were selected as the platform for design. Binding to A ? T sequences requires hydrogen‐bond donors whereas recognition of the G‐NH₂ requires an acceptor. The concept that we report herein uses pre‐organized N‐methylbenzimidazole (N‐MeBI) thiophene modules for selective binding with mixed bp DNA sequences. The interaction between the thiophene sigma hole (positive electrostatic potential) and the electron‐donor nitrogen of N‐MeBI preorganizes the conformation for accepting an hydrogen bond from G‐NH₂. The compound–DNA interactions were evaluated with a powerful array of biophysical methods and the results show that N‐MeBI‐thiophene monomer compounds can strongly and selectively recognize single G ? C bp sequences. Replacing the thiophene with other moieties significantly reduces binding affinity and specificity, as predicted by the design concept. These results show that the use of molecular features, such as sigma‐holes, can lead to new approaches for small molecules in biomolecular interactions.     

Thermal Stability of Modified i‐Motif Oligonucleotides with Naphthalimide Intercalating Nucleic Acids

In continuation of our investigation of characteristics and thermodynamic properties of the i‐motif 5′‐d[(CCCTAA)₃CCCT)] upon insertion of intercalating nucleotides into the cytosine‐rich oligonucleotide, this article evaluates the stabilities of i‐motif oligonucleotides upon insertion of naphthalimide (1H‐benzo[de]isoquinoline‐1,3(2H)‐dione) as the intercalating nucleic acid. The stabilities of i‐motif structures with inserted naphthalimide intercalating nucleotides were studied using UV melting temperatures (T_m) and circular dichroism spectra at different pH values and conditions (crowding and non‐crowding). This study indicated a positive effect of the naphthalimide intercalating nucleotides on the stabilities of the i‐motif structures compared to the wild‐type structure which is in contrast to a previous observation for a pyrene‐intercalating nucleotide showing a decrease in T_m values.     

Novel Fluoride‐Labile Nucleobase‐Protecting Groups for the Synthesis of 3′(2′)‐O‐Aminoacylated RNA Sequences

With the aim to develop a general approach to a total synthesis of aminoacylated t‐RNAs and analogues, we describe the synthesis of stabilized, aminoacylated RNA fragments, which, upon ligation, could lead to aminoacylated t‐RNA structures. Novel RNA phosphoramidites with fluoride‐labile 2′‐O‐[(triisopropylsilyl)oxy]methyl (=tom) sugar‐protecting and N‐{{2‐[(triisopropylsilyl)oxy]benzyl}oxy}carbonyl (=tboc) base‐protecting groups were prepared (Schemes 4 and 5), as well as a solid support containing an immobilized N⁶‐tboc‐protected adenosine with an orthogonal (photolabile) 2′‐O‐[(S)‐1‐(2‐nitrophenyl)ethoxy]methyl (=(S)‐npeom) group (Scheme 6). From these building blocks, a hexameric oligoribonucleotide was prepared by automated synthesis under standard conditions (Scheme 7). After the detachment from the solid support, the resulting fully protected sequence 34 was aminoacylated with L ‐phenylalanine derivatives carrying photolabile N‐protecting groups (→ 42 and 43 ; Scheme 9). Upon removal of the fluoride‐labile sugar‐ and nucleobase‐protecting groups, the still stabilized, partially with the photolabile group protected precursors 44 and 45 , respectively, of an aminoacylated RNA sequence were obtained (Scheme 9 and Fig. 3). Photolysis of 45 under mild conditions resulted in the efficient formation of the 3′(2′)‐O‐aminoacylated RNA sequence 46 (Fig. 4). Additionally, we carried out model investigations concerning the stability of ester bonds of aminoacylated ribonucleotide derivatives under acidic conditions (Table) and established conditions for the purification and handling of 3′(2′)‐O‐aminoacylated RNA sequences and their stabilized precursors.     

Hydroxamic Acid‐Piperidine Conjugate is an Activated Catalyst for Lysine Acetylation under Physiological Conditions

Lysine acylation of proteins is an essential chemical reaction for posttranslational modification and as a means of protein modification in various applications. N,N‐Dimethyl‐4‐aminopyridine (DMAP) derivatives are widely‐used catalysts for lysine acylation of proteins; however, the DMAP moiety mostly exists in a protonated, and thus deactivated, form under physiological conditions due to its basicity. An alternative catalytic motif furnishing higher acylation activity would further broaden the possible applications of chemical lysine acylation. We herein report that the hydroxamic acid‐piperidine conjugate Ph‐HXA is a more active catalytic motif for lysine acetylation than DMAP under physiological conditions. In contrast to DMAP, the hydroxamic acid moiety is mostly deprotonated under aqueous neutral pH, resulting in a higher concentration of the activated form. The Ph‐HXA catalyst is also more tolerant of deactivation by a high concentration of glutathione than DMAP. Therefore, Ph‐HXA might be a suitable catalytic motif for target protein‐selective and site‐selective acetylation in cells.     

De novo sequencing of highly modified therapeutic oligonucleotides by hydrophobic tag sequencing coupled with LC–MS

Correct sequences are prerequisite for quality control of therapeutic oligonucleotides. However, there is no definitive method available for determining sequences of highly modified therapeutic RNAs, and thereby, most of the oligonucleotides have been used clinically without direct sequence determination. In this study, we developed a novel sequencing method called ‘hydrophobic tag sequencing’. Highly modified oligonucleotides are sequenced by partially digesting oligonucleotides conjugated with a 5′‐hydrophobic tag, followed by liquid chromatography–mass spectrometry analysis. 5′‐Hydrophobic tag‐printed fragments (5′‐tag degradates) can be separated in order of their molecular masses from tag‐free oligonucleotides by reversed‐phase liquid chromatography. As models for the sequencing, the anti‐VEGF aptamer (Macugen) and the highly modified 38‐mer RNA sequences were analyzed under blind conditions. Most nucleotides were identified from the molecular weight of hydrophobic 5′‐tag degradates calculated from monoisotopic mass in simple full mass data. When monoisotopic mass could not be assigned, the nucleotide was estimated using the molecular weight of the most abundant mass. The sequences of Macugen and 38‐mer RNA perfectly matched the theoretical sequences. The hydrophobic tag sequencing worked well to obtain simple full mass data, resulting in accurate and clear sequencing. The present study provides for the first time a de novo sequencing technology for highly modified RNAs and contributes to quality control of therapeutic oligonucleotides. Copyright © 2016 John Wiley & Sons, Ltd.