Synthesis of Zwitterionic Cobaltocenium Borate and Borata‐alkene Derivatives from a Borole‐Radical Anion

Chemical single‐electron reduction of 1‐mesityl‐2,3,4,5‐tetraphenylborole ( 3 ) gave a stable radical anion [CoCp*₂][ 3 ] as shown in earlier investigations. Herein, we present the reaction of [CoCp*₂][ 3 ] with the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl radical (TEMPO), a common radical trap. Instead of radical recombination, the reaction proceeds through a redox pathway involving oxidation of the borole radical anion combined with reduction of TEMPO. This electron‐transfer process is accompanied by a deprotonation reaction of the cobaltocenium counterion by the base TEMPO^? to give TEMPO‐H and a neutral cobalt(I) fulvene complex ( 7 ). The latter was not observed directly during the reaction, because it instantaneously reacts as a nucleophile attacking at the boron center of the in situ generated borole 3 to give the borate 6 . However, 7 was synthesized independently by deprotonation of [CoCp*₂][PF₆]. In addition, the obtained zwitterionic cobaltocenium borate 6 undergoes a photolytic rearrangement to form the borata‐alkene derivative 9 that thermally transforms to the chiral cobaltocenium borate 12 . Our investigations are based on spectroscopic evidence, X‐ray crystallography, elemental analysis, as well as DFT calculations.     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

The Effect of Ionic Liquid Covalent Bonding to Sol‐Gel Processed Film on Ion Accumulation and Transfer

Accumulation of electroactive anions into a silicate film with covalently bonded room temperature ionic liquid film deposited on an indium tin oxide electrode was studied and compared with an electrode modified with an unconfined room temperature ionic liquid. A thin film containing imidazolium cationic groups was obtained by sol‐gel processing of the ionic liquid precursor 1‐methyl‐3‐(3‐trimethoxysilylpropyl)imidazolium bis(trifluoromethylsulfonyl)imide together with tetramethylorthosilicate on the electrode surface. Profilometry shows that the obtained film is not smooth and its approximate thickness is above 1 μm. It is to some extent permeable for a neutral redox probe – 1,1′‐ferrocene dimethanol. However, it acts as a sponge for electroactive ions like Fe(CN)₆^3?, Fe(CN)₆^4? and IrCl₆^3?. This effect can be traced by cyclic voltammetry down to a concentration equal to 10^?7 mol dm^?3. Some accumulation of the redox active ions also occurs at the electrode modified with the ionic liquid precursor, but the voltammetric signal is significantly smaller compare with the bare electrode. The electrochemical oxidation of the redox liquid t‐butyloferrocene deposited on silicate confined ionic liquid film is followed by the expulsion of the electrogenerated cation into an aqueous solution. On the other hand, the voltammetry obtained with the electrode modified with t‐butyloferrocene solution in the ionic liquid precursor exhibits anion sensitive voltammetry. This is explained by anion insertion into the unconfined ionic liquid deposit following t‐butylferricinium cation formation.     

Synthesis and Molecular Recognition of Water‐Soluble S6‐Corona[3]arene[3]pyridazines

We report the efficient and scalable synthesis and molecular‐recognition properties of novel and water‐soluble S₆‐corona[3]arene[3]pyridazines. The synthesis comprises a one‐pot nucleophilic aromatic substitution reaction between diesters of 2,5‐dimercaptoterephthalate and 3,6‐dichlorotetrazine followed by the inverse electron‐demand Diels–Alder reaction of the tetrazine moieties with an enamine and exhaustive saponification of esters. The resulting S₆‐corona[3]arene[3]pyridazines, which adopt a 1,3,5‐alternate conformation in the crystalline state, are able to selectively form stable 1:1 complexes with dicationic guest species in water with association constants ranging from (1.10±0.06)×10³ M ^?1 to (1.18±0.06)×10⁵ M ^?1. The easy availability, large cavity size, strong and selective binding power render the water‐soluble S₆‐corona[3]arene[3]pyridazines useful macrocyclic hosts in various disciplines of supramolecular chemistry.     

Elemental Sulfur Disproportionation in the Redox Condensation Reaction between o‐Halonitrobenzenes and Benzylamines

The disproportionation of elemental sulfur at moderate temperatures is investigated in the redox condensation involving o‐halonitrobenzenes 1 and benzylamines 2 . As a redox moderator, elemental sulfur plays the dual role of both electron donor and acceptor, generating its lowest and highest oxidation states: S^?2 (sulfide equivalent) in benzothiazole 3 and S⁺⁶ (sulfate equivalent) in sulfamate 4 , and filling the electron gap of the global redox condensation process. Along with this process, a cascade of reactions of reduction of the nitro group of 1 , oxidation of the aminomethyl group of 2 , metal‐free aromatic halogen substitution, and condensation finally led to 2‐arylbenzothiazoles 3 .     

Harnessing Electron Transfer from the Perchlorotriphenylmethide Anion to Y@C82(C2v) to Engineer an Endometallofullerene‐Based Salt

We show that electron transfer from the perchlorotriphenylmethide anion (PTM^?) to Y@C₈₂(C_2v) is an instantaneous process, suggesting potential applications for using PTM^? to perform redox titrations of numerous endohedral metallofullerenes. The first representative of a Y@C₈₂‐based salt containing the complex cation was prepared by treating Y@C₈₂(C_2v) with the [K⁺([18]crown‐6)]PTM^? salt. The synthesis developed involves the use of the [K⁺([18]crown‐6)]PTM^? salt as a provider of both a complex cation and an electron‐donating anion that is able to reduce Y@C₈₂(C_2v). For the first time, the molar absorption coefficients for neutral and anionic forms of the pure isomer of Y@C₈₂(C_2v) were determined in organic solvents with significantly different polarities.     

Isolation of a Three‐Coordinate Boron Cation with a Boron–Sulfur Double Bond

The reaction of the bulky bis(imidazolin‐2‐iminato) ligand precursor (1,2‐(L^MesNH)₂‐C₂H₄)[OTs]₂ ( 1 ²⁺ 2[OTs]^?; L^Mes=1,3‐dimesityl imidazolin‐2‐ylidene, OTs=p‐toluenesulfonate) with lithium borohydride yields the boronium dihydride cation (1,2‐(L^MesN)₂‐C₂H₄)BH₂[OTs] ( 2 ⁺ [OTs]^?)_. The boronium cation 2 ⁺ [OTs]^? reacts with elemental sulfur to give the thioxoborane salt (1,2‐(L^MesN)₂‐C₂H₄)BS[OTs] ( 3 ⁺ [OTs]^?). The hitherto unknown compounds 1 ²⁺ 2[OTs]^?, 2 ⁺ [OTs]^?, and 3 ⁺ [OTs]^? were fully characterized by spectroscopic methods and single‐crystal X‐ray diffraction. Moreover, DFT calculations were carried out to elucidate the bonding situation in 2 ⁺ and 3 ⁺. The theoretical, as well as crystallographic studies reveal that 3 ⁺ is the first example for a stable cationic complex of three‐coordinate boron that bears a B?S double bond.     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Negative- and positive-ion chemical ionization mass spectra of aromatic amines: Surface-assisted reactions involving oxygen

The O₂–N₂ and O₂–Ar negative-ion chemical ionization mass spectra of aromatic amines show a series of unusual ions dominated by an addition appearing at [M + 14]^?˙. Other ions are observed at [M – 12]^?˙, [M + 5]^?˙, [M + 12]^?˙, [M + 28]^?˙ and [M + 30]^?˙. Ion formation was studied using a quadrupole instrument equipped with a conventional chemical ionization source and a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. These studies, which included the examination of ion chromatograms, measurement of positive-ion chemical ionization mass spectra, variation of ion source temperature and pressure and experiments with ¹⁸O₂, indicate that the [M + 14]^?˙ ion is formed by the electron-capture ionization of analytes altered by surfaceassisted reactions involving oxygen. This conversion is also observed under low-pressure conditions following source pretreatment with O₂. Experiments with [¹⁵N]aniline, [2,3,4,5,6-²H₅] aniline and [¹³C₆]aniline show that the [M + 14]^?˙ ion corresponds to [M + O ? 2H]^?˙, resulting from conversion of the amino group to a nitroso group. Additional ions in the spectra of aromatic amines also result from surface-assisted oxidation reactions, including oxidation of the amino group to a nitro group, oxidation and cleavage of the aromatic ring and, at higher analyte concentrations, intermolecular oxidation reactions.     

Inclusion of diprotonated [2.2.2]cryptand in the cavity of uranyl‐complexed p‐phenyl­tetra­homodioxacalix[4]arene

In the title compound, 4,7,13,16,21,24‐hexa­oxa‐1,10‐diazo­nia­bicyclo­[8.8.8]hexa­cosane dioxo[7,13,21,27‐tetra­phenyl‐3,17‐di­oxa­penta­cyclo­[23.3.1.1^5,9.1^11,15.1^19,23]ditriaconta‐1(29),5,7,9(30),11(31),12,14,19(32),20,22,25,27‐dodeca­ene‐29,30,31,32‐tetra­olato]uranium dimethyl sulfoxide tri­solvate, (C₁₈H₃₈N₂O₆)[U(C₅₄H₄₀O₆)O₂]·3C₂H₆OS, the uranyl ion is bound to the four phenoxide groups of the deprotonated p‐phenyl­tetra­homodioxacalix[4]arene ligand in a cone conformation, resulting in a dianionic complex. The diprotonated [2.2.2]cryptand counter‐ion is located in the cavity defined by the eight aromatic rings of the homooxacalixarene, where it is held by cation–anion, cation–π and possibly C—H⋯π inter­actions. Dimerization in the packing leads to the formation of sandwich assemblages in which two diprotonated [2.2.2]cryptands are encompassed by two uranyl complexes.     

Isolable Anion Radicals of Nitrosoarenes

Summary of main observation and conclusion The rich redox chemistry of nitrosoarenes has rendered these reactive molecules very useful in modern synthetic and material chemistry.Electrochemical studies have revealed the capability of nitrosoarenes to undergo one-electron oxidation or reduction reaction for a long time.However,the isolation and structural characterization of nitrosoarene radical compounds deviating the stabilization of transition-metal have not been achieved.Investigation on the reduction reaction of nitrosoarenes bearing steric demanding substituents has now revealed that the interaction of 2,6-dimesityl-1-nitroso-benzene(DmpNO)or 2,4,6-tri(tert-butyl)-1-nitroso-benzene(TtpNO)with KC8 and crypt-2,2,2 can produce the corresponding anion radical compound[K(crypt-2,2,2)][DmpNO](1)or[K(crypt-2,2,2)][TtpNO](2)in good isolated yield.Compounds 1 and 2 represent the first examples of isolable nitrosoarene radical compounds deviating the stabilization of transition-metal,and have been characterized by single-crystal X-ray diffraction study,electron paramagnetic resonance(EPR)spectroscopy,and elemental analysis.Theoretical study in collaboration with the characterization data revealed that the unpaired spin in[DmpNO]·-and[TtpNO]·-delocalizes on the nitroso and the central phenyl groups.     

Correlated Coordination and Redox Activity of a Hemilabile Noninnocent Ligand in Nickel Complexes

The compound [Ni(Q_M)₂], Q_M=4,6‐di‐tert‐butyl‐N‐(2‐methylthiomethylphenyl)‐o‐iminobenzoquinone, is a singlet diradical species with approximately planar configuration at the tetracoordinate metal atom and without any Ni?S bonding interaction. One‐electron oxidation results in additional twofold Ni?S coordination (d_Ni?S≈2.38 Å) to produce a complex cation of [Ni(Q_M)₂](PF₆) with hexacoordinate Ni^II and two distinctly different mer‐configurated tridentate ligands. The O,O′‐trans arrangement in the neutral precursor is changed to an O,O′‐cis configuration in the cation. The EPR signal of [Ni(Q_M)₂](PF₆) has a very large g anisotropy and the magnetic measurements indicate an S=3/2 state. The dication was structurally characterized as [Ni(Q_M)₂](ClO₄)₂ to exhibit a similar NiN₂O₂S₂ framework as the monocation. However, the two tridentate (O,N,S) ligands are now equivalent according to the formulation [Ni^II(Q_M⁰)₂]²⁺. Cyclic voltammetry reflects the qualitative structure change on the first, but not on the second oxidation of [Ni(Q_M)₂], and spectroelectrochemistry reveals a pronounced dependence of the 800–900 nm absorption on the solvent and counterion. Reduction of the neutral form occurs in an electrochemically reversible step to yield an anion with an intense near‐infrared absorption at 1345 nm (ε=10400 M ^?1 cm^?1) and a conventional g factor splitting for a largely metal‐based spin (S=1/2), suggesting a [(Q_M ^{. ?})Ni^II(Q_M^2?)]^? configuration with a tetracoordinate metal atom with antiferromagnetic Ni^II–(Q_M ^{. ?}) interactions and symmetry‐allowed ligand‐to‐ligand intervalence charge transfer (LLIVCT). Calculations are used to understand the Ni?S binding activity as induced by remote electron transfer at the iminobenzoquinone redox system.     

Towards a Molecular Understanding of Cation–Anion Interactions—Probing the Electronic Structure of Imidazolium Ionic Liquids by NMR Spectroscopy,X‐ray Photoelectron Spectroscopy and Theoretical Calculations

Ten [C₈C₁Im]⁺ (1‐methyl‐3‐octylimidazolium)‐based ionic liquids with anions Cl^?, Br^?, I^?, [NO₃]^?, [BF₄]^?, [TfO]^?, [PF₆]^?, [Tf₂N]^?, [Pf₂N]^?, and [FAP]^? (TfO=trifluoromethylsulfonate, Tf₂N=bis(trifluoromethylsulfonyl)imide, Pf₂N=bis(pentafluoroethylsulfonyl)imide, FAP=tris(pentafluoroethyl)trifluorophosphate) and two [C₈C₁C₁Im]⁺ (1,2‐dimethyl‐3‐octylimidazolium)‐based ionic liquids with anions Br^? and [Tf₂N]^? were investigated by using X‐ray photoelectron spectroscopy (XPS), NMR spectroscopy and theoretical calculations. While ¹H NMR spectroscopy is found to probe very specifically the strongest hydrogen‐bond interaction between the hydrogen attached to the C² position and the anion, a comparative XPS study provides first direct experimental evidence for cation–anion charge‐transfer phenomena in ionic liquids as a function of the ionic liquid’s anion. These charge‐transfer effects are found to be surprisingly similar for [C₈C₁Im]⁺ and [C₈C₁C₁Im]⁺ salts of the same anion, which in combination with theoretical calculations leads to the conclusion that hydrogen bonding and charge transfer occur independently from each other, but are both more pronounced for small and more strongly coordinating anions, and are greatly reduced in the case of large and weakly coordinating anions.     

Reduction vs. Addition: The Reaction of an Aluminyl Anion with 1,3,5,7‐Cyclooctatetraene

The potassium aluminyl complex K[Al(NON^Ar)] (NON=NON^Ar=[O(SiMe₂NAr)₂]^2?, Ar=2,6‐iPr₂C₆H₃) reacts with 1,3,5,7‐cyclooctatetraene (COT) to give K[Al(NON^Ar)(COT)]. The COT‐ligand is present in the asymmetric unit as a planar μ₂‐η²:η⁸‐bridge between Al and K, with additional K???π‐aryl interactions to neighboring molecules that generate a helical chain. DFT calculations indicate significant aromatic character, consistent with reduction to [COT]^2?. Addition of 18‐crown‐6 causes a rearrangement of the C₈‐carbocycle to form the isomeric 9‐aluminabicyclo[4.2.1]nona‐2,4,7‐triene anion.     

An Interplay of Cooperativity between Cation⋅⋅⋅π, Anion⋅⋅⋅π and C?H⋅⋅⋅Anion Interactions

Mixed cation (Li⁺, Na⁺ and K⁺) and anion (F^?, Cl^?, Br^?) complexes of the aromatic π‐surfaces (top and bottom) are studied by using dispersion‐corrected density functional theory. The selectivity of the aromatic surface to interact with a cation or an anion can be tuned and even reversed by the electron‐donating/electron‐accepting nature of the side groups. The presence of a methyl group in the ? OCH₃, ? SCH₃, ? OC₂H₅ in the side groups of the aromatic ring leads to further cooperative stabilization of the otherwise unstable/weakly stable anion???π complexes by bending of the side groups towards the anion to facilitate C? H???anion interactions. The cooperativity among the interactions is found to be as large as 100 kcal mol^?1 quantified by dissection of the three individual forces from the total interaction energy. The crystal structures of the fluoride binding tripodal and hexapodal ligands provide experimental evidence for such cooperative interactions.     

Raman Spectroscopic Study on Alkyl Chain Conformation in 1‐Butyl‐3‐methylimidazolium Ionic Liquids and their Aqueous Mixtures

Ionic liquids of 1‐butyl‐3‐methylimidazolium ([BMIM]) cation with different anions (Cl^?, Br^?, I^?, and BF₄^?), and their aqueous mixtures were investigated by using Raman spectroscopy and dispersion‐included density functional theory (DFT). The characteristic Raman bands at 600 and 624 cm^?1 for two isomers of the butyl chain in the imidazolium cation showed significant changes in intensity for different anions as well as in aqueous solutions. The area ratio of these two bands followed the order I^?>Br^?>Cl^?>BF₄^? (in terms of the anion X in [BMIM]X), indicating that the butyl chain of [BMIM]I tends to adopt the trans conformation. The butyl chain was found to adopt the gauche conformation upon dilution, irrespective of the anion type. The Raman bands in the butyl C?H stretch region for [BMIM]X (X=Cl^?, Br^?, and I^?) blueshifted significantly with the increase in the water concentration, whereas that for [BMIM]BF₄ changed very little upon dilution. The blueshift in the C?H stretch region upon dilution also followed the order: [BMIM]I>[BMIM]Br>[BMIM]Cl>[BMIM]BF₄, the same order as the above trans conformation preference of the butyl chain in pure imidazolium ionic liquids, which suggested that the cation‐anion interaction plays a role in determining the conformation of the chain.     

Ligand‐Centred Reactivity of Bis(picolyl)amine Iridium: Sequential Deprotonation,Oxidation and Oxygenation of a “Non‐Innocent” Ligand

Treatment of [Ir(bpa)(cod)]⁺ complex [ 1 ]⁺ with a strong base (e.g., tBuO^?) led to unexpected double deprotonation to form the anionic [Ir(bpa?2H)(cod)]^? species [ 3 ]^?, via the mono‐deprotonated neutral amido complex [Ir(bpa?H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal–chelate ring may explain the favourable double deprotonation. The rhodium analogue [ 4 ]^? was prepared in situ. The new species [M(bpa?2H)(cod)]^? (M=Rh, Ir) are best described as two‐electron reduced analogues of the cationic imine complexes [M^I(cod)(Py‐CH₂‐N?CH‐Py)]⁺. One‐electron oxidation of [ 3 ]^? and [ 4 ]^? produced the ligand radical complexes [ 3 ]^. and [ 4 ]^.. Oxygenation of [ 3 ]^? with O₂ gave the neutral carboxamido complex [Ir(cod)(py‐CH₂‐N‐CO‐py)] via the ligand radical complex [ 3 ]^. as a detectable intermediate.     

Small Angle X‐ray Diffraction Studies for Hydrophobically Modified Polyelectrolytes

Sulfonate anion modified acrylic acid ter‐polymers and [2‐(methacryloyloxy)ethyl] trimethyl‐ammonium chloride cation modified acrylic acid polymers have been prepared and were characterized with small angle x‐ray diffraction studies. While the sulfonate anion modified acrylic acid ter‐polymer solutions exhibit strong scattering at an angle corresponding to a scattering vector 0.016 A^?1, the cation modified acrylic acid polymers show no scattering at corresponding concentrations. The anion modified acrylic acid ter‐polymers are more compact than the corresponding cation‐modified acrylic acid polymers.     

Mechanism of the Pd‐catalyzed Decarboxylative Allylation of α‐Imino Esters: Decarboxylation via Free Carboxylate Ion

The Pd‐catalyzed decarboxylative allylation of α‐(diphenylmethylene)imino esters ( 1 ) or allyl diphenylglycinate imines ( 2 ) is an efficient method to construct new C(sp³)? C(sp³) bonds. The detailed mechanism of this reaction was studied by theoretical calculations [ONIOM(B3LYP/LANL2DZ+p:PM6)] combined with experimental observations. The overall catalytic cycle was found to consist of three steps: oxidative addition, decarboxylation, and reductive allylation. The oxidative addition of 1 to [(dba)Pd(PPh₃)₂] (dba=dibenzylideneacetone) produces an allylpalladium cation and a carboxylate anion with a low activation barrier of +9.1 kcal mol^?1. The following rate‐determining decarboxylation proceeds via a solvent‐exposed α‐imino carboxylate anion rather than an O‐ligated allylpalladium carboxylate with an activation barrier of +22.7 kcal mol^?1. The 2‐azaallyl anion generated by this decarboxylation attacks the face of the allyl ligand opposite to the Pd center in an outer‐sphere process to produce major product 3 , with a lower activation barrier than that of the minor product 4 . A positive linear Hammett correlation [ρ=1.10 for the PPh₃ ligand] with the observed regioselectivity ( 3 versus 4 ) supports an outer‐sphere pathway for the allylation step. When Pd combined with the bis(diphenylphosphino)butane (dppb) ligand is employed as a catalyst, the decarboxylation still proceeds via the free carboxylate anion without direct assistance of the cationic Pd center. Consistent with experimental observations, electron‐withdrawing substituents on 2 were calculated to have lower activation barriers for decarboxylation and, thus, accelerate the overall reaction rates.     

A Monoanionic Arsenide Source: Decarbonylation of the 2‐Arsaethynolate Anion upon Reaction with Bulky Stannylenes

We report fundamental studies on the reactivity of the 2‐arsaethynolate anion (AsCO^?), a species that has only recently become synthetically accessible. The reaction of AsCO^? with the bulky stannylene Ter₂Sn (Ter=2,6‐bis[2,4,6‐trimethylphenyl]phenyl) is described, which leads to the unexpected formation of a [Ter₃Sn₂As₂]^? cluster compound. On the reaction pathway to this cluster, several intermediates were identified and characterized. After the initial association of AsCO^? to Ter₂Sn, decarbonylation occurs to give an anion featuring monocoordinate arsenic, [Ter₂SnAs]^?. Both species are not stable under ambient conditions, and [Ter₂SnAs]^? rearranges to form [TerSnAsTer]^?, an unprecedented anionic mixed Group 14/15 alkene analogue.