Anthracene derivatives bearing sulfur atoms or selenium atoms as fluorescent chemosensors for Cu and Hg: different selectivity induced from ligand immobilization onto anthracene

Two new selenium containing anthracene derivatives and two new sulfur containing anthracene derivatives were synthesized as fluorescent chemosensors for Hg²⁺ and Cu²⁺. Compound 1 displayed a highly selective chelation enhanced fluorescence quenching (CHEQ) effect only with Cu²⁺, on the other hand, compounds 3 and 4 displayed highly selective chelation enhanced fluorescence (CHEF) effects only with Hg²⁺ among the metal ions examined.     

Fluorescent peptide sensor for the selective detection of Cu

A new fluorescent peptidyl chemosensor for Cu²⁺ ions with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl chloride (acceptor), consists of the amino acids glycine and aspartic acid (Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly). Coordination of the Cu²⁺ ions to the metal chelating unit results in fluorescent quenching of both the donor and acceptor fluorophores. Although it was determined that Cu²⁺ binding causes no change in FRET efficiency, emission and Cu²⁺-induced quenching of the acceptor dye can be used to monitor the concentration of the copper ions, with a detection limit of 32 μg L⁻¹. The sensor also demonstrated sensitivity, reversibility and selectivity towards Cu²⁺ in a transition metal matrix at pH 7.0.     

Highly sensitive and selective optical chemosensor for determination of Cu2+ in aqueous solution

A highly selective and sensitive rhodamine-based colorimetric chemosensor (1) for quantification of divalent copper in aqueous solution has been investigated in this work. It was designed using salicylaldehyde hydrazone and rhodamine 6G as copper-chelating and signal-reporting groups, respectively. In environmentally friendly media (50% (v/v) water/ethanol and 10 mM NaAc–HAc neutral buffer (pH 7.0)), the sensor exhibited selective absorbance enhancement to Cu²⁺ over other metal ions at 529 nm, with a dynamic working range of 0.05–5.00 μM and a detection limit of 10 nM Cu²⁺, respectively. To achieve fluorometric determination of Cu²⁺, the Cu²⁺-induced absorbance enhancement of 1 was efficiently converted to fluorescence quenching by fluorescence inner filter effects using rhodamine B (RB) as a fluorophore. The selectivity and sensitivity of fluorescence analysis were similar to those of absorptiometric measurement. Both absorptiometric and fluorometric methods were successfully applied to the detection of Cu²⁺ in three water samples.     

N,N-二甲基吡啶苯甲醛缩对二甲氨基苯甲酰腙的合成及对Cu2+的选择性识别

设计合成了可用于识别铜离子的化合物N,N-二甲基吡啶苯甲醛缩对二甲氨基苯甲酰腙(1), 通过¹H NMR, ¹³C NMR和MS等对其结构进行了表征; 采用荧光光谱和吸收光谱法研究了化合物1与金属离子间的相互作用. 结果表明, 化合物1对Cu²⁺ 呈现良好的选择性, Cu²⁺ 的加入使化合物1的荧光强度增强12.5倍, 加入其它金属离子如Fe³⁺, Zn²⁺, Pb²⁺, Hg²⁺, Cd²⁺, Co²⁺, Ni²⁺, Li⁺, K⁺, Ca²⁺, Mg²⁺ 和 Ag⁺, 仅引起化合物1荧光强度的微降. 采用双倒数线性回归拟合法计算可知, 化合物1与Cu²⁺ 形成了1: 1型强发光配合物, 结合常数为2.0×10⁷ L/mol.     

Cu ion core conservation from reactant to product in the Cu+F2 chemiluminescent reaction

Electronic chemiluminescence from the reaction of selected ground state (²S_1/2) or metastable (²D_5/2, ²D_3/2) copper atoms with fluorine has been studied using a hollow cathode-flowing afterglow reactor. The observed signal related to the Cu(²S) and Cu*(²D) atom densities, indicate that the chemiluminescence cross-section for Cu*(²D) atoms is about 10⁴ times larger than for Cu(²S) atoms. This strong propensity is explained in terms of a direct reaction, initiated by a harpooning process, during which the Cu⁺ ion core of the reactant (3d¹⁰ for Cu(²S) and 3d⁹4s for Cu*(²D)) is conserved in the products (ionic structure Cu⁺(3d¹⁰)F⁻ for the CuF ground state and Cu⁺(3d⁹4s)F⁻ for the CuF*(a, A, B, C, D) chemiluminescent states).     

Highly Sensitive and Selective Chemosensor for Cu2+ Based on a Schiff Base

A new chemosensor based on a Schiff base has been designed and synthesized. Its sensing behavior toward various metal ions was investigated by fluorescence and UV-Vis spectroscopic methods. The fluorescence of the sensor was quenched and the color rapidly changed from canary yellow to brown after the addition of Cu²⁺, while no changes occurred after the addition of other metal ions, which contributes to the detection of Cu²⁺ with naked eyes. The fluorescence quantum yield of the ligand was calculated to be 0.52. The corresponding detection limit of Cu²⁺ was 5.721×10^-7 mol/L, and the 1:1 binding mode of the sensor with Cu²⁺ was revealed by Job's plot.     

11-Mercaptoundecanoic acid functionalized gold nanoclusters as fluorescent probes for the sensitive detection of Cu2+ and Fe3+ ions

Metal ions are physiologically essential,but excessive metal ions may cause severe risk to plants and animals.Here,we prepared gold nanoclusters(Au NCs) protected by 11-mercaptoundecanoic acid(11-MUA),which have excellent fluorescence properties for the detection of metal ions.The results showed that the copper ions(Cu~(2+)) and iron ions(Fe~(3+)) in the solution have obvious quenching effect on the fluorescence intensity of Au NCs.The detection range of Fe~(3+) was 0.8–4.5 mmol/L(R~2= 0.992) and 4.5–11.0 mmol/L(R~2= 0.997).And Cu~(2+) has a lower linear range(0.1–1.0 mmol/L,R2= 0.993).When EDTA was added into the reaction system,it was observed that the quenching effect of Cu~(2+) and Fe~(3+)on Au NCs showed different phenomenon.Then,the effect of metal ions on the fluorescence of Au NCs was investigated.The selective detection of Cu~(2+) was achieved by EDTA masking of Fe~(3+).In addition,we realized the metal ions detection application of Au NCs in the serum     

Rhodamine 6G-based Chemosensor for the Visual Detection of Cu2＋ and Fluorescent Detection of Hg2＋ in Water

A novel water soluble chemosensor 1 based on rhodamine 6G spirolactam scaffold has been synthesized and characterized.Upon addition of a wide range of the environmentally and biologically relevant metal ions,chemosensor 1 shows a colorimetric selective Cu2＋ recognition from colorless to pink confirmed by UV-Vis absorption spectral changes,while it also exhibits a fluorometric selective Hg2＋ recognition by fluorescence spectrometry.An absorption enhancement factor over 17-fold with 1-Cu2＋ complex and a fluorescent enhancement factor over 45-fold with 1-Hg2＋ complex were observed.Their recognition mechanisms were assumed to be a 1：1 stoichiometry for 1-Cu2＋ complex and a 1：2 stoichiometry for 1-Hg2＋ complex,respectively,which were proposed to be different ligation leading to the ring-opening of rhodarnine 6G spirolactam.Furthermore,the detection limits for CU2＋ or Hg2＋ were 3.3 × 10-8 or 1.7x 10-7 mol/L,respectively.     

A pyridoxal-based chemosensor for visual detection of copper ion and its application in bioimaging

A pyridoxal-based chemosensor was synthesized by reacting hydrazine hydrate and pyridoxal hydrochloride in ethanol and characterized by NMR and ESI-MS.The optical properties of the compound were investigated in a methanol:HEPES solution.The compound displayed selectivity for Cu2+,as evidenced by a colorless to yellow color change,which was characterized using UV–vis spectroscopy.The fluorescence of the compound can be quenched only by Cu2+,accompanying by a color change from blue to colorless.Furthermore,it can be used in bioimaging.     

铜离子与SALI3-2蛋白的相互作用

用1/2 MS固体培养基培养拟南芥幼苗, 研究了CuCl₂对转Sali3-2基因植株生长的影响, 发现转基因植株Sali3-2的表达可提高其耐受Cu²⁺胁迫的能力. 进一步克隆Sali3-2基因, 表达并纯化了缺失信号肽的 SALI3-2 蛋白. 利用固定金属离子亲和色谱(IMAC)分析发现, Cu²⁺ 能够与 SALI3-2 蛋白结合. 通过荧光光谱及圆二色光谱(CD)进一步研究了Cu²⁺ 与 SALI3-2 蛋白间的键合机理. 结果表明, Cu²⁺ 可引起SALI3-2 蛋白内源性荧光猝灭, 其猝灭机制为静态猝灭; Cu²⁺ 与SALI3-2 蛋白的结合常数为8.89×10⁶, 结合位点数为1.6. CD分析显示, Cu²⁺ 与SALI3-2 蛋白的结合未使SALI3-2 蛋白二级结构发生明显改变. 由此推测, 在高浓度铜离子胁迫下, SALI3-2蛋白通过结合一定数量的Cu²⁺使蛋白的构象发生改变, 这可能是SALI3-2蛋白的表达使植物耐受Cu²⁺胁迫能力提高的分子机制之一.     

A Highly Selective Fluorescent Chemosensor for Cu2+

A new Zn²⁺ probe L2-Zn(L2=naphthofuran carbonylhydrazone derivant) was synthesized as a fluorescence chemosensor for Cu²⁺, by which Cu²⁺ ion could be detected with high selectivity and sensitivity in a wide pH range via a displacement “turn-off” signaling strategy. Whereas the coordination between Zn²⁺ and L2 resulted in a considerable enhancement of typical luminescence of a naphthalofuran group in complex L2-Zn, the addition of Cu²⁺ ion led to a dramatic decrease in the emission intensity of probe L2-Zn at about 503 nm(excitation at 423 nm). The competitive fluorescent experiments showed that other metal ions, such as Hg²⁺, Fe³⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺ and Mg²⁺ could not impact the detection of Cu²⁺. The detection limit of the novel probe L2-Zn for Cu²⁺ ion was as low as 2.3×10^-7 mol/L, which is far lower than the guideline value of 1.6×10^-5 mol/L of the United States Environmental Protection Agency.     

[12] ane N_3-based BODIPY as a selective and sensitive off–on sensor for the sequential recognition of Cu~(2+) ions and ADP

A novel [12]aneN3-based BODIPY sensor 1 can be applied in the sequential recognition of Cu2 and ADP in aqueous solution and living cells with high selectivity and sensitivity     

Modeling the separation performance of nanofiltration membranes for the mixed salts solution

A new model is proposed to evaluate the separation performance of nanofiltration (NF) membranes for the mixed salts solution. In the model, the observed transmission of an ion through a NF membrane is applied to express the separation performance of the membrane for the ion in the mixed salts solution, which has a relationship with the total concentration, the equivalent fraction and the species of each ion in the mixed salts solution. The verification of the model was carried out in the permeation experiments of some mixed salts solutions ((1) Na⁺, Cl⁻ and F⁻; (2) Na⁺, K⁺ and Cl⁻; (3) Na⁺, F⁻, Cl⁻ and NO₃⁻; (4) Na⁺, Cl⁻, NO₃⁻ and SO₄²⁻) through three commercial NF membranes (ESNA 1-LF, ESNA 1 and LES 90). According to the permeation experiments of three NF membranes for some binary salts solutions, the competition coefficients of ions were obtained. The model evaluation results agreed quite well with the experimental data. Finally, the model was applied to evaluate the observed transmission of each ion in the mixed salts solution (Na⁺, F⁻, Cl⁻, NO₃⁻ and SO₄²⁻) through three NF membranes. The agreement between the model evaluation results and the experimental data indicated that the model is suitable for evaluating the separation performance of three NF membranes for the mixed salts solution.     

Synthesis and fluorescence behaviour of crown and azacrown ethers carrying the dansyl fluorophore as a pendant in acetonitrile solution

The influence of Li⁺, Na⁺, K⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Al³⁺ ions on the spectroscopic properties of the dansyl group covalently linked to crown ether or diazacrown ethers was investigated by means of absorption and emission spectrophotometry. Interaction of the alkali metal ions with all fluoroionophores studied is weak, while alkaline earth metal ions interact strongly causing about 50% quenching of dansyl fluorescence of A21C5-Dns and A₂18C6-Dns. The Cu²⁺, Pb²⁺ and Al³⁺ cations interact very strongly with dansyl chromophore regardless the crown ether type, causing a major change in absorption spectrum of the chromophore and forming non-fluorescent complexes. The Co²⁺, Ni²⁺, Zn², Mg²⁺ and Ag⁺ cations interact moderately with all fluoroionophores studied causing about 20% of fluorescence quenching of dansyl, except for a strong dansyl fluorescence quenching of 15C5-Dns by Co²⁺ ion. The quenching efficiency of didansylated fluoroionophores by the alkali metal ions and alkaline earth metal ions is weaker than monodansylated ones.     

DFT study on the reaction mechanisms of polyfluorosulfonate ester with F

Gas-phase reaction of C(1)F₃S(2)O₂O(3)C(4)H₂C(5)F₃ and F⁻(16) is investigated using DFT method. The geometries of various stationary points and their relative energies are obtained from 6-31+G*, 6-311G**, and 6-311++G** levels. In the S_N2(C) reaction leading to the cleavage of the C(4)–O(3) bond, the reaction complex results from attacking of F⁻ at a hydrogen atom H11 attached to carbon atom C(4). Afterward, F⁻ is attacking the atom C(4) from the backside of the atom O(3) with the help of the neighboring effect, and meanwhile a multi-membered ring, F(16)–H(11)–C(4)–C(5)–F(16), is being formed. The S_N2(C) reaction is irreversible. On the contrary, the S_N2(S) reaction leading to the cleavage of the S(2)–O(3) bond is reversible, and it is initiated by attacking of F⁻ at the atom S(2) from the backside of the atom O(3). The products of the reaction CF₃SO₃CH₂CF₃ +F⁻ should be, thermodynamically, controlled due to the reversibility of the S_N2(S) reaction, and those result, chemospecifically, from the cleavage of the C–O bond. At last, the SCRF calculations confirm that the solvent effect is preferable to the S_N2(C) reaction.     

A novel chemosensor-bipyridyl end capped hyperbranched conjugated polymer

A novel hyperbranched conjugated chemosensor with bipyridyl groups as periphery groups（BPY-HPV） was synthesized.BPY-HPV was highly sensitive to metal ions(Cu²⁺,Ni²⁺) for the strong coordination interaction(K_sv at the order of 10⁷ mol^-1 L) monitored by fluorescence spectroscopy.Moreover,by hydrogen bonds and charge transfer interaction,BPY-HPV shows strong interaction with 1,1,2,2-tetrachloroethane whatever in CH₂Cl₂(K_sv～10⁶ mol^-1 L) or film.     

基于碳点的荧光纳米开关灵敏检测Cu(Ⅱ)离子和焦磷酸盐

利用羟基与氨基在高温条件下反应,不断聚合生成碳点（CDs）,该碳点可发射不依赖激发波长的明亮的红色荧光.将CDs作为目标敏感荧光团时,发现Cu²⁺可特异性猝灭碳点的荧光,而焦磷酸盐（PPi）可在一定程度上恢复上述体系的荧光.其中,Cu²⁺对CDs的荧光猝灭是由于Cu²⁺与CDs发生络合反应,从而发生静态猝灭过程;而加入PPi之后,由于它与CDs的结合能力更强,因此Cu²⁺离开CDs的表面,体系的荧光得以恢复.在此基础上构建了一种高选择性、高灵敏度的off-on荧光纳米开关传感体系,分别用于Cu²⁺和PPi的定量检测,检出限分别达2.14 μmol/L和1.85 μmol/L.该传感体系可应用于实际样品检测,拓宽了荧光CDs的传感应用,为其在生物体内目标分子的检测提供了可能性.     

Magnetic study of highly conductive TCNQ salts of Cu(II) complexes with 2,2''-bipyridine, 1,10-phenanthroline and ethylenediamine

The magnetic susceptibility has been determined for CuL_n(TCNQ⁻)₂ (L = 2,2'-bipyridine, 1,10-phenanthroline, or ethylenediamine;n = 1 or 2), having high electric conductivity. The results show that the Cu²⁺L_n chelates are partially reduced to Cu²⁺L_n in the complexes. The equilibrium Cu²⁺L_n(TCNQ⁻)₂ Cu⁺L_n(TCNQ⁻)(TCNQ^o) produces conduction electrons in TCNQ columns.     

Novel Fluorescent Chemosensors Based on Tryptophan Unit for Cu2+ and Fe3+ in Aqueous Solution

We reported four fluorescent chemosensors containing tryptophan units. The fluorescence spectrum titration experiments suggest that chemosensors 1, 2, 3 and 4 are highly selective for Cu²⁺ and Fe³⁺ over Li⁺, Na⁺, K⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺ and Cr³⁺ via forming complexes with Cu²⁺ or Fe³⁺, which is confirmed by dramatical quench of fluoreseence in aqueous solution at pH 7.4, thus making all the chemosensors suitable for Cu²⁺ and Fe³⁺ fluorescent sensors.     

6-(N,N-Dimethylamino)-2-naphthoylacryl Acid: a Highly Selective and Sensitive Fluorescent Sensor of Copper(II)

A novel fluorescent probe, 6-(N,N-dimethylamino)-2-naphthoylacryl acid(ACADAN) was designed and synthesized as a fluorescent sensor for Cu²⁺ in aqueous media. Significant amplification of fluorescence signals without causing any discernible change of maximum fluorescence emission wavelength(λ_max) was observed upon the addition of Cu²⁺. Importantly, ACADAN is capable of recognizing Cu²⁺ selectively in aqueous media in the presence of various biologically relevant metal ions and the prevalent toxic metal ions in the environment with high sensitivity(detection limit was 0.1 μmol/L).