Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

Tuning the regioselectivity of (benzimidazolylmethyl)amine palladium(II) complexes in the methoxycarbonylation of hexenes and octenes

Reactions of N-(1H-benzoimidazol-2-ylmethyl-2-methoxy)aniline (L1) and N-(1H-benzoimidazol-2-ylmethyl-2-bromo)aniline (L2) with p-TsOH, Pd(AOc)₂ and two equivalents of PPh₃ or PCy₃ produced the corresponding palladium complexes, [Pd(L1)(OTs)(PPh₃)] (1), [Pd(L2)(OTs)(PPh₃)] (2) and [Pd(L1)(OTs)(PCy₃)] (3), respectively, in good yields. The new palladium complexes 1–3 and the previously reported complexes [Pd(L1)ClMe] (4) and [Pd(L2)ClMe] (5) gave active catalysts in the methoxycarbonylation of terminal and internal olefins to produce branched and linear esters. The effects of complex structure, nature of phosphine derivative, acid promoter and alkene substrate on the catalytic activities and selectivity have been studied and are herein reported.     

Reactions of 1,4-diaza-3-methylbutadien-2-ylpalladium(II) derivatives with chloro-bridged rhodium(I) complexes

The reactions of the organometallic 1,4-diazabutadienes, RN=C(R′)C(Me)=NR″ [R = R″ = p-C₆H₄OMe, R′ = trans-PdCl(PPh₃)₂ (DAB); R = p-C₆H₄OMe, R″ = Me, R′ = trans-PdCl(PPh₃)₂ (DAB^I; R = R″ = p-C₆H₄OMe, R′ = Pd(dmtc)-(PPh₃), dmtc = dimethyldithiocarbamate (DAB^II); R = R″ = p-C₆H₄OMe, R′ = PdCl(diphos), diphos = 1,2-bis(diphenylphosphino)ethane (DAB^III)] with [RhCl(COD)]₂ (COD = 1,5-cyclooctadiene, Pd/Rh ratio = $\text{1}\text{2}$) depend on the nature of the ancillary ligands at the Pd atom in group R′. In the reactions with DAB and DAB^I transfer of one PPh₃ ligand from Pd to Rh occurs yielding [RhCl(COD)(PPh₃)] and the new binuclear complexes [Rh(COD) {RN=C(R?)-C(Me)=NR″}], in which the diazabutadiene moiety acts as a chelating bidentate ligand. Exchange of ligands between the two different metallic centers also occurs in the reaction with DAB^II. In this case, the migration of the bidentate dmtc anion yields [Rh(COD)Pdmtc] and [Rh(COD) {RN=C(R?)C(Me)=NR″}]. In contrast, the reaction with DAB^III leads to the ionic product [Rh(COD)- (DAB^III)][RhCl₂(COD)], with no transfer of ligands. The cationic complex [Rh(COD)(DAB^III)]⁺ can be isolated as the perchlorate salt from the same reaction (Pd/Rh ratio = 1/1) in the presence of an excess of NaClO₄. In all the binuclear complexes the coordinated 1,5-cyclooctadiene can be readily displaced by carbon monoxide to give the corresponding dicarbonyl derivatives. The reaction of [RhCl(CO)₂]₂ with DAB and/or DAB^I yields trinuclear complexes of the type [RhCl(CO)₂]₂(DAB), in which the diazabutadiene group acts as a bridging bidentate ligand. Some reactions of the organic diazabutadiene RN=C(Me)C(Me)=NR (R = p-C₆H₄OMe) are also reported for comparison.     

Synthesis and characterization of cyclometallated palladium(II) and platinum(II) complexes with amide-thiolate ligands

The redox reaction of bis(2-benzamidophenyl) disulfide (H₂L-LH₂) with [Pd(PPh₃)₄] in a 1:1 ratio gave mononuclear and dinuclear palladium(II) complexes with 2-benzamidobenzenethiolate (H₂L⁻), [Pd(H₂L-S)₂(PPh₃)₂] (1) and [Pd₂(H₂L-S)₂ (μ-H₂L-S)₂(PPh₃)₂] (2). A similar reaction with [Pt(PPh₃)₄] produced only the corresponding mononuclear platinum(II) complex, [Pt(H₂L-S)₂(PPh₃)₂] (3). Treatment of these complexes with KOH led to the formation of cyclometallated palladium(II) and platinum(II) complexes, [Pd(L-C,N,S)(PPh₃)]⁻ ([4]⁻) and [Pt(L-C,N,S) (PPh₃)]⁻ ([5]⁻). The molecular structures of 2, 3 and [4]⁻ were determined by X-ray crystallography.     

Structural and Photophysical Study on Heterobimetallic Complexes with d8–d10 Interactions Supported by Carborane Ligands: Theoretical Analysis of the Emissive Behaviour

Heterobimetallic complexes of formula [M{(PPh₂)₂C₂B₉H₁₀}(S₂C₂B₁₀H₁₀)M′(PPh₃)] (M=Pd, Pt; M′=Au, Ag, Cu) and [Ni{(PPh₂)₂C₂B₉H₁₀}(S₂C₂B₁₀H₁₀)Au(PPh₃)] were obtained from the reaction of [M{(PPh₂)₂C₂B₁₀H₁₀}(S₂C₂B₁₀H₁₀)] (M=Pd, Pt) with [M′(PPh₃)]⁺ (M′=Au, Ag, Cu) or by one‐pot synthesis from [(SH)₂C₂B₁₀H₁₀], (PPh₂)₂C₂B₁₀H₁₀, NiCl₂ ? 6 H₂O, and [Au(PPh₃)]⁺. They display d⁸–d¹⁰ intermetallic interactions and emit red light in the solid state at 77 K. Theoretical studies on [M{(PPh₂)₂C₂B₉H₁₀}(S₂C₂B₁₀H₁₀)Au(PPh₃)] (M=Pd, Pt, Ni) attribute the luminescence to ligand (thiolate, L)‐to‐“P₂‐M‐S₂” (ML′) charge‐transfer (LML′CT) transitions for M=Pt and to metal (M)‐to‐“P₂‐M‐S₂” (ML′) charge‐transfer (MML′CT) transitions for M=Ni, Pd.     

Syntheses and characterization of some new 2-picolylpalladium(II) complexes

The 2-picolylpalladium(II) complex [{Pd(CH₂Py)Cl(PPh₃)}₂] (CH₂Py=2-picolyl) (I), prepared from 2-picolyl chloride and [Pd(PPh₃)₄], was treated with lithium bromide, silver acetate, 4-picoline (pic) and silver perchlorate, thallium acetylacetonate{Tl(acac)}, sodium dimenthyldithiocarbamate-water-(1/2) {Na(dmdc). 2 H₂O}, and 1,2-bis(diphenylphospino)ethane (dppe) to yield [{PdBr(CH₂Py)(PPh₃)}₂] (II), [{Pd(CH₂Py)OAc(PPh₃)}₂] (III), [{Pd(Ch₂Py)(pic)(PPh₃)}₂](ClO₄)₂ (IV), [Pd(CH₂Py)(acac)(PPh₃)] (V), [Pd(CH₂Py)(dmdc)(PPh₃)] (VI), and [Pd(Ch₂Py)Cl(dppe)] (VII), respectively. Halogen abstraction from VII using silver perchlorate afforded an ionic complex [{Pd(CH₂Py)(dppe)}₂](ClO₄)₂ (VIII). It was concluded that the 2-picolyl groups in these eight complexes are σ-bonded to palladium, and that in the dinuclear complexes I, II, III, IV, and VIII, they serve as bridging ligands.     

Mechanism of formation of carbene complexes by reaction of cis-[PdCl2(PPh3)(CNR)] with secondary amines

A kinetic study is reported for the reactions of secondary aromatic amines p-YC₆H₄NHR (Y = MeO, Me, H; R = Me, Et) with the isocyanide complexes cis-[PdCl₂(p-XC₆H₄NC)(PPh₃)] (X = Me, H, Cl) leading to the carbene derivatives cis-[PdCl₂ {C(NH-p-C₆H₄X)NR-p-C₆H₄Y} (PPh₃)] in 1,2-dichloroethane at 25°C. A stepwise mechanism is proposed which involves a direct nucleophilic attack of the entering amine on the isocyanide carbon followed by proton transfers to the final carbene complexes. These take place both intramolecularly in a four-membered cyclic transition state and by the agency of one further amine molecule serving as a proton acceptor-donor in a six-membered transition state. Competition experiments with primary amines and trends in rate parameters are discussed to support the mechanism.     

Synthesis, X-ray studies, spectroscopic characterization and DFT calculations of p-tolylimido rhenium(V) complexes bearing an imidazole-based ligand

Novel p-tolylimido rhenium(V) complexes [Re(p-NC₆H₄CH₃)X₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]X (X = Cl, Br) have been obtained in the reactions of [Re(p-NC₆H₄CH₃)X₃(PPh₃)₂] with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). The compounds were identified by elemental analysis IR, UV-Vis spectroscopy and X-ray crystallography. The electronic structures of the complex [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and the cation [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]⁺ have been calculated with the density functional theory (DFT) method. Additional information about binding in the [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]⁺ has been obtained by NBO analysis. The electronic spectra of [Re(p-NC₆H₄CH₃)Cl₂(hpb)(PPh₃)] and [Re(p-NC₆H₄CH₃)(hpb)₂(PPh₃)]Cl were investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.     

Insertion of isocyanides into the palladium-(2-pyridyl) bond

The reaction of the pyridyl-bridged binuclear complex [PdBr(μ-2-C₅H₄N)(PPh₃)]₂ with isocyynides CNR (R  p-C₆H₄OMe, Me, C₆H₁₁) yields the complex $\text{PdBr}${(&2.dbnd;NR)C(&2.dbnd;NR) (2-C₅H₄N)}(PPh₃)] containing a C,N-chelated 1,2-bis(imino)-2-(2-pyridyl)ethyl group, which results from successive insertions of two isocyanides molecules into the palladium2-pyridyl bond. The mononuclear compound trans-[PdBr(2-C₅H₄N)(PMePh₂)₂] readily reacts with various CNR ligands (R  p-C₆H₄OMe, Me, C₆H₁₁, CMe₃) to give the imino(2-pyridyl)methylpalladium(II) derivatives, trans-[Pdbr{C(=NR)(2-C₅H₄N)} (PMePh₂)₂].     

Tandem β‐Boration/Arylation of α,β‐Unsaturated Carbonyl Compounds by Using a Single Palladium Complex To Catalyse Both Steps

Diphenyl(3‐methyl‐2‐indolyl)phosphine (C₉H₈NPPh₂, 1 ) gives stable dimeric palladium(II) complexes that contain the phosphine in P,N‐bridging coordination mode. On treating 1 with [Pd(O₂CCH₃)₂], the new complexes [Pd(μ‐C₉H₇NPPh₂)(NCCH₃)]₂ ( 2 ) or [Pd(μ‐C₉H₇NPPh₂)(μ‐O₂CCH₃)]₂ ( 3 ) were isolated, depending on the solvent used, acetonitrile or toluene, respectively. Further reaction of 3 with the ammonium salt of 1 led to the substitution of one carboxylate ligand to afford [Pd(μ‐C₉H₇NPPh₂)₃(μ‐O₂CCH₃)] ( 4 ), in which the bimetallic unit is bonded by three C₉H₇NPPh₂^? moieties and one carboxylate group. Using this methodology, [Pd₂(μ‐C₆H₄PPh₂)₂(μ‐C₉H₇NPPh₂)(μ‐O₂CCX₃)] (X=H ( 7 ); X=F ( 8 )) were synthesised from the ortho‐metalated compounds [Pd(C₆H₄PPh₂)(μ‐O₂CCX₃)]₂ (X=H ( 5 ); X=F ( 6 )). Complexes 3 , 4 , 7 , and 8 have been found to be active in the catalytic β‐boration of α,β‐unsaturated esters and ketones under mild reaction conditions. Hindrance of the carbonyl moiety has an influence on the reaction rate, but quantitative conversion was achieved in many cases. More remarkably, when aryl bromides were added to the reaction media, complex 7 induced a highly successful consecutive β‐boration/cross‐coupling reaction with dimethyl acrylamide as the substrate (99 % conversion, 89 % isolated yield).     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

Metal-thiophen derivatives. Organometallic compounds of palladium and platinum

Thienylmercury(II)chloride reacts with [Pd(PPh₃)₂Cl₂], [Pd(PPh₃)₄] and [Pt(PPh₃)₄] to afford new compounds containing a metal-2-thienyl linkage. The compound [Pd(PPh₃)₂(2-C₄H₃S)Cl] probably has trans stereochemistry.2-Bromothiophen undergoes oxidative addition with [Pd(PPh₃)₄] and [Pt(PPh₃)₄], probably via a radical mechanism. With [Pd(CO)(PPh₃)₃], a carbonyl inserted product is obtained. The bromo-metal(II) complexes have trans stereochemistry. The course of the reaction between 3-methyl-2-bromothiophen and Pd(PPh₃)₄ is more complex. Thus, there is evidence of some cis bromopalladium(II) compounds amongst the products, also there is good evidence to support the view that some isomerisation of 3-methyl-2-thienyl to 4-methyl-2-thienyl occurs during the reaction, thus giving greater molar quantities of [Pd(PPh₃)₂(4-CH₃-2-C₄H₂S)Br] than can be accounted for from any initial 4-methyl-2-bromothiophen impurity.The metallation of the thiophen ring, probably in the 4-position, with palladium(II) is described for 3-theylidene-4-methylaniline.     

Synthesis and application of ortho-palladated complex of (4-phenylbenzoylmethylene)triphenylphosphorane as a highly active catalyst in the Suzuki cross-coupling reaction

The ortho-metallated complex [Pd(μ-Cl){κ₂(C,C)-[C₆H₄(PPh₂CHC(O)C₆H₄-Ph-4)}]₂ (2a) was prepared by refluxing of Pd(OAc)₂ and {(Ph)₃PCHCOC₆H₄-Ph-4} (PhBPPY) of in CH₂Cl₂ followed by addition of an excess of KCl in MeOH Complex (2a) reacts with triphenylphosphine to give the mononuclear derivative [Pd(Cl)(PhC₆H₄COCHPPh₂C₆H₄)(PPh₃)] (3a) whose crystal structure has been determined by single crystal X-ray diffraction. The Suzuki reactions of aryl bromides and chlorides of varying electron density using complex (3a) as an efficient catalyst were performed, giving the cross-coupling products in good to excellent yields.     

The influence of substituents (R) at the C carbon on bonding properties of thiosemicarbazones {RC(H)N-NH–C(S)–NH2} in palladium(II) complexes

Reactions of the trans-PdCl₂(PPh₃)₂ precursor with furan-2-carbaldehyde thiosemicarbazone (Hftsc) and thiophene-2-carbaldehyde thiosemicarbazone (Httsc), in 1:1 molar ratios in the presence of Et₃N base, removed one Cl and one PPh₃ group from the Pd^II center, and yielded the complexes [Pd(η²-N³,S-ftsc)(PPh₃)Cl] (1) and [Pd(η²-N³,S-ttsc)(PPh₃)Cl] (2), respectively. However, when a 1:2 molar ratio (M:L) was used, both Cl and PPh₃ ligands were removed, yielding the complexes trans-[Pd(η²-N³,S-ftsc)₂] (3) and trans-[Pd(η²-N³,S-ttsc)₂] (4). Complexes 1–4 have been characterized with the help of analytical data, spectroscopic techniques (IR, ¹H and ³¹P NMR) and single crystal X-ray crystallography. The thiosemicarbazone ligands behave as uninegative N³,S-chelating ligands in complexes 1–4. In contrast, pyrrole-2-carbaldehyde thiosemicarbazone (H₂ptsc) and salicylaldehyde thiosemicarbazone (H₂stsc) invariably formed the complexes [Pd(η³-N⁴,N³,S-ptsc)(PPh₃)] (5) and [Pd(η³–O, N³,S-stsc)(PPh₃)] (6), respectively, and the ligands acted as binegative tridentate donors (N⁴, N³, S, 5; O, N³, S, 6).     

Synthesis and characterization of platinum and palladium pyrrolidinedithiocarbamate complexes

Treatment of (PPh₃)₂MCl₂ (M = Pd or Pt) with ammonium pyrrolidinedithiocarbamate (NH₄S₂CNC₄H₈) in a 1:1 molar ratio gave (PPh₃)M(Cl)(κ ² S,S-S₂CNC₄H₈) [M = Pt (1), Pd (2)]. On the other hand, the interaction of these compounds in a 1:2 [M:L] molar ratio gave (PPh₃)Pt(κS-S₂CNC₄H₈)(κ ² S,S-S₂CNC₄H₈) (3), which contains both terminal and chelated dithiocarbamato ligands, or a yellow insoluble solid for M = Pd. The bis(diphenylphosphino)ethane platinum or palladium dichlorides [(dppe)MCl₂] reacted with the same ligand to give the salts [(dppe)M(κ ² S,S-S₂CNC₄H₈)]Cl (M = Pt (4), Pd (5) which have only one chelating dithiocarbamato ligand. The new compounds were characterized by ¹H-, ¹³C{¹H}- and ³¹P-n.m.r. spectroscopy, mass spectrometry, elemental analysis and X-ray single crystal structure analysis.     

Glucose ferrocenyl-oxazolines: Coordination behavior toward [Pd(η-allyl)Cl]2 studied by ESI-MS

Several new oxazolin-2-yl-substituted ferrocenes based on 2-amino-2-deoxy-α-d-glucose were synthesized via the corresponding amides followed by closing the oxazoline-ring with SnCl₄.Coordination properties of representatives of the group of mono- and bis-oxazolinyl ferrocenes, 2-ferrocenyl-4,5-(3,4,6-tri-O-acetyl-1,2-dideoxy-d-glucopyrano)-[2,1-d]-oxazoline and 1,1′-bis{4,5-(3,4,6-tri-O-acetyl-1,2-dideoxy-d-glucopyrano)-[2,1-d]-oxazolin-2-yl}ferrocene, respectively, toward [Pd(η³-allyl)Cl]₂ were investigated by electrospray ionization mass spectrometry in positive ion mode and by MS/MS technique.With the monooxazoline derivative mainly a 1:1 complex with the Pd-moiety was found in the mass spectrum while the bisoxazoline yields a stoichiometry of 2:1 (oxazoline:Pd). The latter result is attributed to steric hindrance of the coordination of a second Pd-moiety to the bulky bisoxazolinyl-ferrocene.In the case of 1,1′-bis{4,5-(3,4,6-tri-O-acetyl-1,2-dideoxy-d-glucopyrano)-[2,1-d]-oxazolin-2-yl}ferrocene 9 overlapping of two signals in the m/z range from 955-965 was found which can be assigned to the singly charged adduct [C₃₆H₄₀FeN₂O₁₆ + Pd(η³-C₃H₅)]⁺ and a doubly charged Pd-ligand cluster with the general formula Pd₂[L(9)]₂.In addition, the molecular structure of 1,1′-bis{4,5-(3,4,6-tri-O-acetyl-1,2-dideoxy-d-glucopyrano)-[2,1-d]-oxazolin-2-yl}ferrocene was determined by X-ray diffraction analysis.     

Metallation of aliphatic carbon atoms: II,syntheses and characterization of the cyclopalladated complexes of N,N-dimethylneopentylamine

N,N-Dimethylneopentylamine reacts with Pd(MeCO₂)₂ to give a novel trinuclear cyclopalladated complex [Me₂NCH₂CMe₂CH₂Pd(μ-MeCO₂)₂Pd(μ-MeCO₂)₂PdCH₂CMe₂CH₂NMe₂]?-0.5C₆H₆ (I). The reaction of I with PPh₃ affords both trans-[Pd(MeCO₂)₂(PPh₃)₂] (II) and [Pd(CH₂CMe₂CH₂NMe₂)(MeCO₂)(PPh₃)] (III). The reaction of III with LiCl yields a mononuclear cyclopalladated complex, [Pd(CH₂CMe₂CH₂NMe₂)Cl(PPh₃)] (IV).     

Binuclear hydroxo-monopentahalophenyl complexes of palladium(II)

The novel binuclear hydroxo-bridged complexes trans-[R(PPh₃)Pd(μ-OH)₂Pd(PPh₃)R] and cis-[R(PPh₃)Pd(μ-OH)(μ-pz)Pd(PPh₃)R] (R = C₆F₅ or C₆Cl₅; pz = pyrazolate) have been prepared, and their structures assigned on the basis of NMR data.     

Cationic Palladium(II), Platinum(II), and Rhodium(I) Complexes as Acetalisation Catalysts

The use of [Pd(H₂O)2(Ph₂PCH₂CH₂PPh₂)] (CF₃SO₃)₂ as a catalyst for the acetalisation of a variety of aldehydes and ketones and for trans-acetalisation is described. It is also shown that Pt(H₂O)2(PH₂PCH₂CH₂PPh₂) (CF₃SO₃)₂ is at least as effective as the corresponding Pd compound, while much lower reaction rates are observed with [Rh(MeOH)₂(Ph₂PCH₂CH₂PPh₂)] [BF₄].     

Solvent,ligand and temperature effects on the rates of reactions of cis-[PdCl2(CNR)(L)] with secondary amines

The kinetics of the reaction of cis-[PdCl₂(CN-p-C₆H₄Cl)(PPh₃)] with N-methylaniline yielding the carbene derivative cis-[PdCl₂ {C(NH-p-C₆H₄Cl)NMePh} (PPh₃)] have been studied in various solvents such as acetone, 1, 4-dioxane, 1,2-dichloroethane, and benzene. Overall rates for the stepwise process increase with decreasing ability of the solvent to form hydrogen bonds with the attacking amine. A kinetic study is also reported for the reactions of N-methylaniline with cis- [PdCl₂(CN-p-C₆H₄Me)(L)] in 1,2-dichloroethane (L = P(OMe)₃, P(OMe)₂Ph, PPh₃. PMePh₂, PMe₂Ph, PEt₃, PCy₃). The cis ligand L affects reaction rates through both steric and electronic factors. The nucleophilic attack of the amine on the CN carbon atom of coordinated isocyanide is favoured by low steric requirements and high π-acceptor ability of L. The activation parameters for the bimolecular nucleophilic attack when L = PPh₃ are △H^≠₂ = 9.8 ± 0.7 kcal/mol and △S^≠₂ = — 30 ± 2 e.u.