Recent developments in optical detection methods for microchip separations

This paper summarizes the features and performances of optical detection systems currently applied in order to monitor separations on microchip devices. Fluorescence detection, which delivers very high sensitivity and selectivity, is still the most widely applied method of detection. Instruments utilizing laser-induced fluorescence (LIF) and lamp-based fluorescence along with recent applications of light-emitting diodes (LED) as excitation sources are also covered in this paper. Since chemiluminescence detection can be achieved using extremely simple devices which no longer require light sources and optical components for focusing and collimation, interesting approaches based on this technique are presented, too. Although UV/vis absorbance is a detection method that is commonly used in standard desktop electrophoresis and liquid chromatography instruments, it has not yet reached the same level of popularity for microchip applications. Current applications of UV/vis absorbance detection to microchip separations and innovative approaches that increase sensitivity are described. This article, which contains 85 references, focuses on developments and applications published within the last three years, points out exciting new approaches, and provides future perspectives on this field.     

Recent developments in electrochemical detection for microchip capillary electrophoresis

Significant progress in the development of miniaturized microfluidic systems has occurred since their inception over a decade ago. This is primarily due to the numerous advantages of microchip analysis, including the ability to analyze minute samples, speed of analysis, reduced cost and waste, and portability. This review focuses on recent developments in integrating electrochemical (EC) detection with microchip capillary electrophoresis (CE). These detection modes include amperometry, conductimetry, and potentiometry. EC detection is ideal for use with microchip CE systems because it can be easily miniaturized with no diminution in analytical performance. Advances in microchip format, electrode material and design, decoupling of the detector from the separation field, and integration of sample preparation, separation, and detection on-chip are discussed. Microchip CEEC applications for enzyme/immunoassays, clinical and environmental assays, as well as the detection of neurotransmitters are also described.     

纳流液相分离与电感耦合等离子体质谱联用技术研究新进展

高效微纳液相分离技术如纳流液相色谱、毛细管电泳、微芯片色谱/电泳等与电感耦合等离子体质谱（ICP-MS）检测技术联用，既具有前端分离技术高选择性、高灵敏度、快速、低样品消耗的特点，又结合了后端ICP-MS检测分辨率高、动态范围宽、可绝对定量等优势，正在发展成为一种重要的高内涵联用分析手段。该文对近年来纳流液相分离与ICP-MS联用装置的发展作一系统介绍，对其在化学与生物化学分析等领域的应用予以综述，并展望了该联用技术的发展前景。     

Recent progress of on-line sample preconcentration techniques in microchip electrophoresis

This review highlights recent developments and applications of on-line sample preconcentration techniques to enhance the detection sensitivity in microchip electrophoresis (MCE); references are mainly from 2008 and later. Among various developed techniques, we focus on the sample preconcentration based on the changes in the migration velocity of analytes in two or three discontinuous solutions system, since they can provide the sensitivity enhancement with relatively easy experimental procedures and short analysis times. The characteristic features of the on-line sample preconcentration applied to microchip electrophoresis (MCE) are presented, categorized on the basis of "field strength-" or "chemically" induced changes in the migration velocity. The preconcentration techniques utilizing field strength-induced changes in the velocity include field-amplified sample stacking, isotachophoresis and transient-isotachophoresis, whereas those based on chemically induced changes in the velocity are sweeping, transient-trapping and dynamic pH junction.     

Recent developments and applications of capillary and microchip electrophoresis in proteomics and peptidomics (mid-2018–2022)

This review gives a wide overview of recent advances and applications of capillary electrophoresis and microchip capillary electrophoresis methods in the fields of proteomics and peptidomics in the period from mid-2018 up to the end of 2022. The methodological topics covering sample preparation and concentration techniques, hyphenation of capillary electrophoresis methods with mass spectrometry, and multidimensional separations by on-line or off-line coupled different capillary electrophoresis and liquid chromatography techniques are described and new developments in both bottom-up and top-down approaches in proteomics are presented. In addition, various applications of capillary electrophoresis methods in proteomic and peptidomic studies are demonstrated. They include monitoring of protein posttranslational modifications and applications in biological and biochemical research, clinical peptidomics and proteomics, and food analysis.     

Label-free fluorescence detection in capillary and microchip electrophoresis

Herein, we summarize the current status of native fluorescence detection in microchannel electrophoresis, with a strong focus on chip-based systems. Fluorescence detection is a powerful technique with unsurpassed sensitivity down to the single-molecule level. Accordingly fluorescence detection is attractive in combination with miniaturised separation techniques. A drawback is, however, the need to derivatize most analytes prior to analysis. This can often be circumvented by utilising excitation light in the UV spectral range in order to excite intrinsic fluorescence. As sensitive absorbance detection is challenging in chip-based systems, deep-UV fluorescence detection is currently one of the most general optical detection techniques in microchip electrophoresis, which is especially attractive for the detection of unlabelled proteins. This review gives an overview of research on native fluorescence detection in capillary (CE) and microchip electrophoresis (MCE) between 1998 and 2008. It discusses material aspects of native fluorescence detection and the instrumentation used, with particular focus on the detector design. Newer developments, featured techniques, and their prospects in the future are also included. In the last section, applications in bioanalysis, drug determination, and environmental analysis are reviewed with regard to limits of detection.     

Recent developments in CE and CEC of peptides (2009-2011)

The review brings a comprehensive survey of the recent developments of high-performance electroseparation methods in capillary and microchip formats: zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography. Applications of these techniques to analysis, isolation, purification and physicochemical and biochemical characterization of peptides are described. Advances in the investigation of electromigration properties of peptides, and in the methodology of their analysis, such as sample preparation, adsorption suppression, EOF control and detection, are presented. New developments, in particular, CE and CEC modes are reported and several types of their applications to peptide analysis are described: conventional qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC techniques to provide relevant physicochemical characteristics of peptides are demonstrated.     

Nanomaterials and chip-based nanostructures for capillary electrophoretic separations of DNA

Capillary electrophoresis (CE) and microchip capillary electrophoresis (MCE) using polymer solutions are two of the most powerful techniques for the analysis of DNA. Problems, such as the difficulty of filling polymer solution to small separation channels, recovering DNA, and narrow separation size ranges, have put a pressure on developing new techniques for DNA analysis. In this review, we deal with DNA separation using chip-based nanostructures and nanomaterials in CE and MCE. On the basis of the dependence of the mobility of DNA molecules on the size and shape of nanostructures, several unique chip-based devices have been developed for the separation of DNA, particularly for long DNA molecules. Unlike conventional CE and MCE methods, sieving matrices are not required when using nanostructures. Filling extremely low-viscosity nanomaterials in the presence and absence of polymer solutions to small separation channels is an alternative for the separations of DNA from several base pairs (bp) to tens kbp. The advantages and shortages of the use of nanostructured devices and nanomaterials for DNA separation are carefully addressed with respect to speed, resolution, reproducibility, costs, and operation.     

芯片毛细管电泳及其在生命科学中的应用

芯片毛细管电泳 (Chip CE)技术在近几年已取得了很大的进展。本文着重介绍芯片毛细管区带电泳技术 ,对等电聚焦、等速电泳、自由溶液电泳及胶束电动色谱等其它芯片电泳模式也有所提及。讨论了芯片材料和制作技术、芯片的几何形状、样品的操作和衍生、检测及芯片毛细管电泳技术的应用 ,特别是在核酸和蛋白质的分离分析中的进展     

Monitoring environmental pollutants by microchip capillary electrophoresis with electrochemical detection

During the past decade, significant progress in the development of miniaturized microfluidic systems has occurred due to the numerous advantages of microchip analysis. This review focuses on recent advances and the key strategies in microchip capillary electrophoresis (CE) with electrochemical detection (ECD) for separating and detecting a variety of environmental pollutants. The subjects covered include the fabrication of microfluidic chips, ECD, typical applications of microchip CE with ECD in environmental analysis, and future prospects. It is expected that microchip CE-ECD will become a powerful tool in the environmental field and will lead to the creation of truly portable devices.     

Sample introduction techniques for microchip electrophoresis: A review

The number of applications of microfluidic analysis systems continues to increase, along with the variety of substrate materials and complexity of the devices themselves. One of the most common features of these devices that has remained relatively unchanged, however, is the introduction of a sample mixture into a separation channel so that individual components can be separated by electrophoresis. Whether a relatively simple mixture of amino acids or a more complex sample of DNA fragments extracted and amplified on-chip, the ability to reliably and reproducibly inject a representative sample is arguably the most significant requirement for an electrophoretic micro total analysis system (μTAS). This review will focus on the different methods reported for sample introduction in microchip electrophoresis, highlighting both pressure-driven and electrokinetic techniques, with an emphasis on the methods employed in μTAS applications.     

Development of Microchip Electrophoresis and Its Applications in Ion Detection

Microchip electrophoresis is emerging as a highly promising method due to its portability and fast analysis with a minimum number of analytes. In this review, recent developments in microchip electrophoresis were described with discussions on the structures, materials, processing technologies, surface modification, experimental methods, and applications in ion detection. The existing issues and prospects of future studies were discussed as well.     

Capillary electrochromatography of peptides and proteins

This paper reviews recent progress in bioanalysis using capillary electrochromatography (CEC), especially in the field of separation of proteins and peptides. Fundamentals of CEC are briefly discussed. Since most of the recent developments on CEC have focused on column technology, i.e., design of new stationary phases and development of new column configurations, we describe here a variety of column architectures along with their advantages and disadvantages. Newly emerged column technologies in CEC for high speed and high efficiency separation are also discussed. Different analytical platforms of CEC such as pressure-assisted CEC or voltage-assisted micro- high-performance liquid chromatography (HPLC), CEC with different detection techniques, CEC on microchip platforms and multidimensional electrochromatography with their applications in peptide and protein analysis are presented.     

Recent developments in electrokinetically driven analysis on microfabricated devices

This review is devoted to the rapid developments in the field of microfluidic separation devices in which the flow is electrokinetically driven, and where the separation element forms the heart of the system, in order to give an overview of the trends of the last three years. Examples of microchip layouts that were designed for various application areas are given. Optimization of mixing and injection strategies, designs for the handling of multiple samples, and capillary array systems show the enormous progress made since the first proof-of-concept papers about lab-on-a-chip devices. Examples of functional elements for on-chip preconcentration, filtering, DNA amplification and on-chip detection indicate that the real integration of various analytical tasks on a single microchip is coming into reach. The use of materials other than glass, such as poly(dimethylsiloxane) and polymethylmethacrylate, for chip fabrication and detection methods other than laser-induced fluorescence (LIF) detection, such as mass spectrometry and electrochemical detection, are described. Furthermore, it can be observed that the separation modes known from capillary electrophoresis (CE) in fused-silica capillaries can be easily transferred to the microchip platform. The review concludes with an overview of applications of microchip CE and with a brief outlook.     

High-throughput genotyping of repeat polymorphism in the regulatory region of serotonin transporter gene by gel microchip electrophoresis.

Large-scale genotyping of the repeat polymorphism in the regulatory region of the serotonin transporter gene (5-HTTLPR) was attempted by polymerase chain reaction (PCR) amplification followed by gel microchip electrophoresis analysis. The multilane (96) format of the gel microchip system allowed parallel separation of a large number of samples. The separation and visualization of the PCR amplicons from either the 5-HTTLPR short allele (number of repeats are 14) or the 5-HTTLPR long form (16 repeats) was completed in a few minutes. Genotyping of healthy Caucasian individuals showed that the short allele had a somewhat lower frequency (0.42) than the long form (0.58), and the genotype frequencies fulfilled the criteria of the Hardy-Weinberg equilibrium (chi = 0.012, p = 0.994). Based on these results, gel microchip electrophoresis system proved to be a powerful tool for high throughput genotyping of repeat polymorphism.     

基于电驱动在线快速分离富集技术的研究进展

样品前处理能将待测物从复杂基质中预先分离富集出来,以提高分析方法的灵敏度、选择性和准确性,是复杂样品分析的关键步骤。样品前处理是一个非自发的、从无序到有序的熵减过程,不仅费时费力,还极易引起误差。向体系输入能量和降低体系熵值可以增强分离富集效果,加快样品制备过程。将电场引入在线样品前处理,既能向体系做功,又能驱动样品定向迁移,使前处理的熵减过程快速顺利进行,是快速样品制备的有效途径。基于电驱动的在线分离富集技术综合了多种加速策略：（1）以电场形式向体系输入能量,加速传质和传热过程;（2）采用电渗流、电泳等电驱动定向流实现样品在分离、富集、检测各步骤之间的定向迁移,保证样品前处理与检测顺利进行;（3）利用在线联用技术集成样品前处理与分析检测各步骤,从而提高自动化程度,减少人为误差;（4）通过微型化装置或微萃取方法提高样品制备效率,缩短样品制备时间。该文总结了近10年与基于电驱动的在线快速分离富集技术相关的90多篇文献,综述了该技术领域的研究进展,探讨了电驱动毛细管在线快速分离富集技术、电驱动芯片在线快速分离富集技术和电驱动膜萃取在线分离富集技术各自的优势和潜力,并展望了该类技术的发展与应用趋势。     

New developments in microextraction techniques in bioanalysis. A review

In recent years, the interest in new extraction methods with lower sample volume requirements, simpler equipment and handling, and lower reagent consumption, has led to the development of a series of microextraction methods based on extraction phases in the microliter order. Nowadays, many references can be found for several of these methods, which imply a wide range of applications referred to both the analyte and the sample nature. In this paper, recent developments in both well-established microextraction techniques (solid phase microextraction, hollow-fiber liquid phase microextraction, dispersive liquid–liquid microextraction, etc.) and recently appeared microextraction procedures (nanoextraction systems, microchip devices, etc.) for the clinical analysis of biological samples will be reviewed and discussed.     

Influence of the pH on separating DNA by high-speed microchip electrophoresis.

Various factors are critical in resolving DNA molecules at high speed, including the separation medium, concentration, composition, and pH of the buffer, as well as the electric field strength. To this study, considered the composition of a buffer and the difference in the pH, while paying attention to whether the separation ability changes in the microchip electrophoresis of DNA. DNA separation was particularly affected by both the buffer composition and the pH. Under the optimal microchip electrophoresis conditions that were determined in this study, an improved resolution of a wider range of DNA fragment sizes was achieved. Moreover, the total separation time decreased from 240 s to 100 s. Thus, by simplifying and improving the DNA electrophoresis in the microchip, this technique is now widely applicable to several different scientific fields.     

Disposable polyester-toner electrophoresis microchips for DNA analysis

Microchip electrophoresis has become a powerful tool for DNA separation, offering all of the advantages typically associated with miniaturized techniques: high speed, high resolution, ease of automation, and great versatility for both routine and research applications. Various substrate materials have been used to produce microchips for DNA separations, including conventional (glass, silicon, and quartz) and alternative (polymers) platforms. In this study, we perform DNA separation in a simple and low-cost polyester-toner (PeT)-based electrophoresis microchip. PeT devices were fabricated by a direct-printing process using a 600 dpi-resolution laser printer. DNA separations were performed on PeT chip with channels filled with polymer solutions (0.5% m/v hydroxyethylcellulose or hydroxypropylcellulose) at electric fields ranging from 100 to 300 V cm(-1). Separation of DNA fragments between 100 and 1000 bp, with good correlation of the size of DNA fragments and mobility, was achieved in this system. Although the mobility increased with increasing electric field, separations showed the same profile regardless of the electric field. The system provided good separation efficiency (215,000 plates per m for the 500 bp fragment) and the separation was completed in 4 min for 1000 bp fragment ladder. The cost of a given chip is approximately $0.15 and it takes less than 10 minutes to prepare a single device.     

Analysis of dopamine D4 receptor gene polymorphism using microchip electrophoresis

A microfabricated electrophoresis device was used for rapid polymerase chain reaction product analysis in genotyping the dopamine D4 receptor gene (DRD4) 48 base pairs repeat polymorphism. An allelic ladder, prepared from homozygous individuals, was used as internal standard during the microchip electrophoresis based analysis. Comparison of this novel separation method with the conventional slab gel and previously reported ultra-thin-layer techniques confirmed the reliability of this new method. Genotyping of 332 healthy Hungarian individuals gave the following allele frequencies: two-repeat: 0.089; three-repeat: 0.026; four-repeat: 0.674; five-repeat: 0.011; six-repeat: 0.002; seven-repeat: 0.189; eight-repeat: 0.011. The genotype frequencies obtained showed no deviation from the Hardy-Weinberg equilibrium (p>0.903), further underlying the reliability of this new genotyping technique.