基于热模塑法制备HDPE仿生超疏水表面

研究了热模塑法在制备超疏水高密度聚乙烯(HDPE)膜中的应用。以高岭土增强的聚二甲基硅氧烷(PDMS)为软模板,采用热模塑技术,将荷叶表面的微结构信息复制到HDPE膜表面。接触角测量结果显示,10%掺杂量的PDMS软模板复制得到的HDPE膜表面,与水的接触角高达156°,呈现超疏水性。扫描电镜照片显示,PDMS软模板具有与荷叶表面互补的"负型结构",而HDPE膜表面则具有与荷叶类似的微米—纳米复合粗糙结构。此法无需溶剂,可推广制备其它热塑性高聚物的超疏水表面。     

仿生超疏水性表面的研究进展*

仿生超疏水性表面的研究是化学模拟生物体系研究中的一个新领域。荷叶等植物叶面的超疏水现象为我们在不同基底上制备仿生超疏水性表面提供了实践基础。本文给出荷叶等三种植物叶面的超疏水性和微观结构，阐述了仿生超疏水性表面的研究进展。     

霸王鞭和麒麟掌叶片的表面微结构及超疏水性

霸王鞭(Euphorbia antiquorum)和麒麟掌(Euphorbia neriifolia var. cristata)是2种特殊的叶片, 正面不疏水而叶片背面超疏水的沙漠植物. 本文通过接触角测试仪、 电子显微镜和表面张力测试仪分别对叶片的超疏水性、 表面微观形貌和表面黏附力进行了测试和表征. 采用模板法, 以聚乙烯醇为模板、 以聚苯乙烯为基底制备仿叶片背面结构的聚苯乙烯薄膜, 并对薄膜表面的超疏水性、 表面微观形貌和表面黏附力进行了测试和表征, 发现这2种叶片背面的平均间距为1~3 μm的层片状微观结构可以构建出具有超疏水高黏附力特性的表面.     

类荷叶结构聚全氟乙丙烯的超疏水性

以聚二甲基硅氧烷（PDMS）复制的荷叶表面微结构为阴模模板,将聚全氟乙丙烯（FEP）粉体置于该阴模模板上,在约0.3 N/cm2的压力,280 ℃和-0.1 Mpa真空度的条件下热压成型,成功制备了具有类荷叶结构的FEP表面。扫描电镜观察结果表明, FEP表面与荷叶表面微结构具有很大的相似性,该表面具有良好的超疏水性,与水的接触角达到168°,滚动角小于3°,而且具有良好的疏酸、疏碱、疏盐溶液性能和稳定性,即使在溶液中长期浸泡而失活后,经piranha洗液处理约10 min,其表面超疏水、疏酸、疏碱性能也可迅速恢复。PDMS的热重分析结果表明,PDMS阴模在热压条件下失重极小,可重复使用。因此,将FEP的耐酸、耐碱、耐腐蚀和低表面能的特性与荷叶表面的特殊结构有机结合,在制备抗粘附、自清洁容器等方面具有广泛的应用前景。     

花生叶表面的高黏附超疏水特性研究及其仿生制备

花生是一种常见的豆科作物.与低黏附超疏水的荷叶不同,花生叶表面同时具有超疏水和高黏附特性.水滴在花生叶表面的接触角为151±2°,显示出超疏水特性.此外,水滴可以牢固地附着在花生叶表面,将花生叶翻转90°甚至180°,水滴均不会从表面滚落,显示了良好的黏附性(黏附力超过80μN).研究发现,花生叶表面呈现微纳米多级结构,丘陵状微米结构表面具有无规则排列的纳米结构.花生叶表面特殊的微纳米多尺度结构是其表面呈现高黏附超疏水特性的关键因素.结合实验数据,对花生叶表面特殊浸润性机理进行了简要阐述.受此启发,利用聚二甲基硅氧烷复形得到了与花生叶表面微结构类似的高黏附疏水表面.本文以期为仿生制备高黏附超疏水表面提供新思路.     

二氧化硅纳米颗粒/硅树脂复合超疏水功能涂层的制备和性能研究

将二氧化硅纳米颗粒和硅树脂制成混合液,采用喷涂法(spray-coating)制备出了具备超疏水性的复合涂层.研究了二氧化硅、硅树脂不同含量配比对涂层疏水性能的影响,结果表明复合涂层的接触角随二氧化硅含量的增加而增加.在二氧化硅含量大于3%(质量分数)时,涂层显现超疏水性;当二氧化硅含量为3%(质量分数)、硅树脂含量为7%(质量分数)时,涂层与水的接触角达到151.6°,滚动角接近0°.通过扫描电子显微镜(SEM)观察涂层表面的微观结构,发现超疏水性的涂层具备微-纳复合阶层结构,类球状突起粒径在5μm左右,类球状突起上分布纳米团聚颗粒,直径约为50 nm.这种类似荷叶表面的微(纳复合阶层结构,结合硅树脂的低表面能,使得复合涂层具备了超疏水性能.     

超疏水性表面的制备及应用进展

近年来,受荷叶、水黾腿、壁虎脚等天然超疏水生物表面特性的启发,研究者们进行了大量仿生超疏水表面材料的制备及应用研究。超疏水性表面因其特殊的微纳分层结构,具有自清洁、防覆冰、防腐蚀、减阻等优异性能。本文阐述了表面润湿、疏水的基本机理,以及超疏水表面研究的理论基础,对超疏水表面制备的最新研究进展进行了综述,并揭示了研究中存在的问题。最后,介绍了超疏水表面在涂料、织物、防腐、抗菌及防雾等领域中的应用,展望了其未来的研究方向和前景。     

仿生超疏水性表面的最新应用研究

近年来,除了荷叶表面,更多具有特殊润湿性的动植物表面同样受到关注。通过研究这些表面微观结构,人们成功地仿生制备出各种功能化超疏水表面,从而更好地满足工业中实际应用的需要。该综述简单地介绍了表面润湿的基本模型和最新的几种特殊表面结构,重点介绍近几年仿生超疏水表面应用的最新研究进展,主要包括超疏水表面在超疏油、表面润湿转换、外界刺激下的润湿行为调控、微流体、抗结冰等方面的应用。最后,对超疏水表面研究的未来发展进行了展望。     

以砂纸为模板制作聚合物超疏水表面

报道了一种聚合物材料超疏水表面的简便制备方法. 以不同型号的金相砂纸为模板, 通过浇注成型或热压成型技术, 在聚合物表面形成不同粗糙度的结构. 接触角实验结果证明, 聚合物表面与水的接触角随着所用砂纸模板粗糙度的增加而加大, 其中粒度号为W7和W5砂纸制作的表面与水的接触角可超过150°, 显示出超疏水性质. 多种聚合物使用砂纸为模均可制备不同粗糙度及超疏水的表面, 本征接触角对复制表面浸润性的影响从Wenzel态到Cassie态而变小. 扫描电镜结果表明, 不规则形状的砂纸磨料颗粒构成了超疏水所需要的微纳米结构的模板.     

仿荷叶表面研究进展

近年来,荷叶表面的自清洁功能引起人们极大的研究兴趣,这种自清洁功能源自于表面形貌与低表面能物质的共同作用.目前,已用不少方法来制备仿荷叶表面.本文回顾近年来仿荷叶表面研究成果,探讨仿荷叶表面研究与发展趋势.     

聚二甲基硅氧烷基质微流控芯片封接技术的研究

考察了聚二甲基硅氧烷(Polydimethylsiloxane,PDMS)预聚体与固化剂间的配比、固化温度及固化时间对PDMS芯片封接强度的影响,得出PDMS芯片封接的最佳条件基片和盖片所用PDMS预聚体与固化剂质量配比分别为10∶1与5∶1,固化温度为75℃,固化时间分别为35～50min和25～40min,封接后继续加热60min.在该条件下封接制作的微芯片历经半年50多次的分析、冲洗及抽液后未见明显损坏,足以满足一般分析任务的要求,并将芯片成功用于两种氨基酸的快速毛细管电泳分离.     

紫外光固化水性油墨及墨膜耐磨性能

传统紫外光固化(UV)油墨具有粘度低、固化速度快、应用范围广等优点。 但存在使用少量有机溶剂、交联程度低等缺陷。 本文通过自由基聚合制备的苯乙烯丙烯酸共聚物与甲基丙烯酸羟乙酯(HEMA)反应制备水性预聚物。 通过甲基丙烯酸缩水甘油酯(GMA)和乙二胺反应制备了含有四丙烯酸官能团的活性稀释剂。 最后,通过水性预聚物、活性稀释剂、光引发剂以及少量溶剂制备了UV光固化水性油墨。 探讨了光引发剂的种类和质量分数、预聚物的相对分子质量和质量分数、活性稀释剂的结构和质量分数对UV油墨的光固化速度以及耐磨度的影响。 当预聚物的数均相对分子质量为1.98×10⁵且质量分数为30%、光引发剂质量分数为4%、活性稀释剂的官能团数目为4且质量分数为40%的UV水性油墨的光固化速率为1 s,经50次磨损质量损失为9%。 该方法所制得的UV水性油墨可用于柔版印刷、凹印、数字印刷等。     

微接触印刷法制造聚合物多层次准三维立体微结构

Microstructures of various polymers, such as polystyrene and polymethyl methacrylate, were fabricated with microcontact printing, directly using the corresponding dilute polymeric solutions as “inks”, whose concentrations were about 10 g/L. By repeatedly cross-stamping with the inks, multilayer quasi-three-dimensional polymeric microstructures could be obtained. Both optical photographs and SEM photos showed clear microstructures, which were nearly accurate replication of the original patterns in the PDMS stamps. Microlines of poly-bis-(p-toluene sulfonate)-2,4-hexadiyne-1,6-diol) (PTS) were also fabricated by first processed microcontact printing with solution of the corresponding monomer TS/acetone as ink, then followed with UV polymerization of the monomer micropatterns at solid state. Unlike small molecule processes, the molecules of polymeric inks did not self assembly on the surface of substrates. The formation of polymeric microstructures could be ascribed to the fact that, after volatilization of solvents, polymers tend to stick to the surface of glass substrate which has higher surface free energy (about 72 mN/m), but not to the surface of PDMS stamp which has lower surface free energy (about 20 mN/m). Also the microcontact printing process was studied with optical microscopy, and the main factor--volatilization time of solvent was discussed. The results showed that the volatilization time of solvent is very crucial to the process of polymeric microcontact printing, and with too longer or too shorter volatilization time, the obtained microstructures would become discontinuous or distorted, respectively. For example, with a polystyrene/chloroform solution as ink, the optimal volatilization time was about 15~20 s.     

软模板印刷法制备超疏水性聚苯乙烯膜

首次利用软模板印刷的方法,以微米-亚微米-纳米复合结构的PDMS为软模板,在平滑聚苯乙烯表面上成功制备了同样具有微米-亚微米-纳米复合结构的超疏水表面,该表面与水的接触角高达161.2º。软模板印刷方法可以用在其它热塑性聚合物如聚丙烯、聚甲基丙烯酸甲酯和聚碳酸酯等材料上,是一种简单有效地制备超疏水性表面的方法。     

Phospholipid biotinylation of polydimethylsiloxane (PDMS) for protein immobilization

Polydimethylsiloxane (PDMS) surfaces can be functionalized with biotin groups by adding biotinylated phospholipids to the PDMS prepolymer before curing. The addition of beta-D-dodecyl-N-maltoside (DDM) in the solution blocks non-specific protein binding on these functionalized PDMS surfaces. We characterize the surface by measuring fluorescently labeled streptavidin binding. Single molecule tracking shows that the phospholipids are not covalently linked to PDMS polymer chains, but the surface functionalization is not removed by washing. We demonstrate the immobilization of biotinylated antibodies and lectins through biotin-avidin interactions.     

A Simple Method for Fabricating Patterned Curvilinear Microstructures in Poly(dimethylsiloxane) by Selective Wetting

The fabrication of patterned microstructures in poly(dimethylsiloxane) (PDMS) is a prerequisite for soft lithography. Herein, curvilinear surface relief microstructures in PDMS are fabricated through a simple three‐stage approach combining microcontact printing (μCP), selective surface wetting/dewetting and replica molding (REM). First, using an original PDMS stamp (first‐generation stamp) with linear relief features, a chemical pattern on gold substrate is generated by μCP using hexadecanethiol (HDT) as an ink. Then, by a dip‐coating process, an ordered polyethylene glycol (PEG) polymer‐dot array forms on the HDT‐patterned gold substrate. Finally, based on a REM process, the PEG‐dot array on gold substrate is used to fabricate a second‐generation PDMS stamp with microcavity array, and the second‐generation PDMS stamp is used to generate third‐generation PDMS stamp with microbump array. These fabricated new‐generation stamps are utilized in μCP and in micromolding in capillaries (MIMIC), allowing the generation of surface micropatterns which cannot be obtained using the original PDMS stamp. The method will be useful in producing new‐generation PDMS stamps, especially for those who want to use soft lithography in their studies but have no access to the microfabrication facilities.     

Monodisperse polystyrene particles crosslinked with poly(dimethyl siloxane) diacrylate using dispersion polymerization and their monomer swelling capability

A flexible poly(dimethyl siloxane) diacrylate (PDMSDA) crosslinker was synthesized using different molecular weights of poly(dimethyl siloxane) (PDMS, M _n =550, 1,700, 4,000 g/mol). The monodisperse polystyrene (PS) particles crosslinked with various contents of PDMSDA were prepared by dispersion polymerization, and applied as seed particles in the seeded polymerization. The crosslinking density of the PS particles was determined from the rate of transport of the monomer molecules to the crosslinked seed particles. It was confirmed that the monomer swelling capacity of seed particles and final morphological changes of polymer beads were determined significantly by the crosslinking density of the seed particles. In addition, the morphological change was not observed without the oligomer swelling step in the seeded polymerization due to the hydrophobic property of PDMS. When highly crosslinked seed particles were used in the seeded polymerization, peculiar morphology (doublet structure) of polymer beads appeared.     

Photoinitiators for UV and visible curing of coatings: Mechanisms and properties

The radiation curing industry is one of the most rapidly developing fields in the entire coatings industry. The low toxicity, cheapness, speed, control and ease of formulation and operation are some of the main advantages of this growing technology. UV and/or visible light radiation is used to induce photochemical polymerization or crosslinking of a monomer, oligomer or prepolymer formulation containing a certain type of unsaturation, such as an acrylic group, and an appropriate initiator. The latter is used to absorb the light energy and transform it into active species, such as radicals or ions, capable of inducing such reactions. Applications extend to general coatings for paper, board, wood, tapes, compact discs and holograms, inks, photoresists for imaging processes and adhesives for welding and sealing in electronic circuit boards. The photoinitiator is the key to the control of these processes and, in recent years, has seen many new developments. These include the need for water-soluble, co-reactive and polymeric structures with low migration rates, as well as cheaper UV/ visible sensitizers with enhanced speed. New and effective cationic systems are also on the scene and, although expensive, are attracting significant academic and commercial interest.     

Poly(dimethylsiloxane) contamination in microcontact printing and its influence on patterning oligonucleotides

It is well-established that, during microcontact printing (muCP) using poly(dimethylsiloxane) (PDMS)-based stamps, some unexpected siloxane fragments can be transferred from the stamp to the surface of the sample. This so-called contamination effect coexists with the delivery of the molecules constituting the ink and by this way influences the printing process. The real impact of this contamination for the muCP technique is still partially unknown. In this work, we investigate the kinetics of this contamination process through the surface characterization of both the sample and the stamp after imprinting. The way both the curing conditions of the PDMS material and the contact time influence the degree of contamination of the surface is investigated on silicon and glass substrates. We propose a cleaning process of the stamp during several hours which eliminates any trace of contamination during printing. We show that hydrophobicity recovery of PDMS surfaces after hydrophilic treatment using oxygen plasma is considerably slowed down when the PDMS material is cleaned using our procedure. Finally, by comparing cleaned and uncleaned PDMS stamps, we show the influence of contamination on the quality of muCP using fluorescent DNA molecules as an ink. Surprisingly, we observe that the amount of DNA molecules transferred during muCP is higher for the uncleaned stamp, highlighting the positive impact of the presence of low molecular weight siloxane fragments on the muCP process. This result is attributed to the better adsorption of oligonucleotides on the stamp surface in presence of these contaminating molecules.     

Microcontact printing of Alzheimer’s β-amyloid monomers and fibrils

Adsorption of the 40-residue Alzheimer’s β-amyloid peptide (Aβ40) on a hydrophobic surface leads to formation of potentially disease-relevant aggregates. Existing techniques are limited in characterizing the adsorbed Aβ40 and producing potentially useful Aβ40 microstructures such as microarrays and microparticles. In this paper, a novel approach based on microcontact printing (μCP) to studying and utilizing adsorption of Aβ40 monomers and fibril fragments on hydrophobic surface of polydimethylsiloxane (PDMS) stamps has been developed. By transferring the adsorbed layer from the stamp to a glass substrate, this approach allows easy measurement of thickness of the adsorbed layer. It also enables characterization of the face of the adsorbed layer in contact with the stamp surface. This face exhibits significant higher thioflavin T fluorescence than the face exposed to water, suggesting β-sheet formation induced by the PDMS surface. The intrinsic stability of the adsorbed layer is evaluated by printing the layer on a water-soluble substrate and exposing it to water vapor or water. Stable particulate microstructures in water are obtained by chemically crosslinking the adsorbed peptides. Moreover, co-micropatterning of the different states of Aβ40 (monomers and fibril fragments) is demonstrated. This μCP-based approach is simple, versatile, and holds potential for various applications.