Preparation of Poly(acrylic acid) Nano-films by In-situ Polymerization of Acrylic Acid Macroclusters on Silicon Oxide Surfaces

A new method for preparing poly(acrylic acid) (PAA) films on silicon oxide surfaces with smooth morphology has been developed. Acrylic acid (AA) was preferably adsorbed on silicon oxide surfaces in AA/ chloroform binary liquids and formed a hydrogen-bonded organized structure, which was called molecular macrocluster. AA macroclusters on silicon oxide surfaces were in-situ polymerized to obtain molecularly flat polymer films with thickness up to 10 nm. In-situ polymerizations were conducted by photo-irradiation in the presence of a photo initiator, 2,2-dimethoxy-2-phenylacetophenone (DPA). As a reference, the adsorption of PAA polymerized in the bulk solution was examined on silicon oxide surfaces. A series of techniques such as attenuated total reflection–FTIR (ATR-FTIR) spectroscopy, ellipsometry and atomic force microscopy (AFM) was utilized for characterizing two types of films. It was found that flat PAA films with linear hydrogen-bonded COOH could only be obtained by in-situ polymerization, which demonstrated this method was an effective way for preparing molecularly uniform polymer films. The surface morphology and thickness of obtained PAA films were found to be dependent on the monomer concentration, initiator amount and photoirradiation time. Molecularly uniform and flat PAA films were obtained after 5 min irradiation at 0.8 mol% AA in the presence of 5 wt% DPA.     

Polymer modification of colloidal particles by spontaneous polymerization of surface active monomers

Adsorption and spontaneous polymerization of head- or tail-type surface active monomers having long methylene chains on colloidal silica and δ-alumina were investigated. Both head-type and tail-type ammonium monomers on silica in chloroform or tetrahydrofuran had the maximum adsorption on the respective adsorption isotherm. Above the monomer concentration giving the maximum adsorption, it was observed that the monomer formed micelles or clusters in bulk solution with removal of adsorbed water molecules from the silica surface. At the monomer concentration giving the maximum adsorption, heating the silica suspension containing the monomer at 40°C or 60°C in tetrahydrofuran or chloroform solution resulted in spontaneous polymerization. The composite particles formed by polymerization were observed to have many spots consisting of polymer on the surface. Therefore, it is suggested that the monomers are concentrated by micelle-like aggregation on the silica surface and consecutively spontaneous polymerization takes place. Adsorption of an anion-type monomer having a carboxyl group on δ-alumina, which exhibited a positive ζ potential in neutral aqueous solution, was higher than that on colloidal silica, but did not spontaneously polymerize on alumina. Received: 13 June 1998 Accepted in revised form: 19 August 1998     

Surface induced hydrogen-bonded macrocluster formation of methanol on silica surfaces

Recently, we have succeeded in identifying the structure of the adsorption layer of ethanol on a silica surface in cyclohexane to be a hydrogen-bonded linear aggregate (polymer), which we call a surface molecular macrocluster. In this work, we studied the effect of the miscibility of liquids on the formation of the surface molecular macroclusters for confirming that this is a surface induced phenomenon. We investigated the interaction and the structure of methanol adsorbed on a silica surface in methanol-cyclohexane binary liquids by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode, and compared the results with those of the ethanol-cyclohexane and 1-propanol-cyclohexane binary liquids. The former system is immiscible at methanol concentrations of ca. 8-90 mol %, and the latter two are miscible at any composition. At 0.03 mol % methanol, which is far from the critical concentration for the phase separation, the contact of the methanol macrocluster layers formed on the silica surface brought about the attraction from a distance of 42 +/- 5 nm which was similar to that observed in ethanol-cyclohexane. At a methanol concentration of 9.0 mol %, above bulk phase separation, completely different force profiles were observed. These results demonstrated that the molecular macrocluster formation was different from the wetting induced by the bulk.     

Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations

A new rational approach for the preparation of molecularly imprinted polymer (MIP) based on the combination of molecular dynamics (MD) simulations and quantum mechanics (QM) calculations is described in this work. Before performing molecular modeling, a virtual library of functional monomers was created containing forty frequently used monomers. The MD simulations were first conducted to screen the top three monomers from virtual library in each porogen-acetonitrile, chloroform and carbon tetrachloride. QM simulations were then performed with an aim to select the optimum monomer and progen solvent in which the QM simulations were carried out; the monomers giving the highest binding energies were chosen as the candidate to prepare MIP in its corresponding solvent. The acetochlor, a widely used herbicide, was chosen as the target analyte. According to the theoretical calculation results, the MIP with acetochlor as template was prepared by emulsion polymerization method using N,N-methylene bisacrylamide (MBAAM) as functional monomer and divinylbenzene (DVB) as cross-linker in chloroform. The synthesized MIP was then tested by equilibrium-adsorption method, and the MIP demonstrated high removal efficiency to the acetochlor. Mulliken charge distribution and ¹H NMR spectroscopy of the synthesized MIP provided insight on the nature of recognition during the imprinting process probing the governing interactions for selective binding site formation at a molecular level. We think the computer simulation method first proposed in this paper is a novel and reliable method for the design and synthesis of MIP.     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.     

A surface functional monomer-directing strategy for highly dense imprinting of TNT at surface of silica nanoparticles

This paper reports a surface functional monomer-directing strategy for the highly dense imprinting of 2,4,6-trinitrotoluene (TNT) molecules at the surface of silica nanoparticles. It has been demonstrated that the vinyl functional monomer layer of the silica surface can not only direct the selective occurrence of imprinting polymerization at the surface of silica through the copolymerization of vinyl end groups with functional monomers, but also drive TNT templates into the formed polymer shells through the charge-transfer complexing interactions between TNT and the functional monomer layer. The two basic processes lead to the formation of uniform core-shell TNT-imprinted nanoparticles with a controllable shell thickness and a high density of effective recognition sites. The high capacity and fast kinetics to uptake TNT molecules show that the density of effective imprinted sites in the nanoshells is nearly 5 times that of traditional imprinted particles. A critical value of shell thickness for the maximum rebinding capacity was determined by testing the evolution of rebinding capacity with shell thickness, which provides new insights into the effectiveness of molecular imprinting and the form of imprinted materials. These results reported here not only can find many applications in molecularly imprinting techniques but also can form the basis of a new strategy for preparing various polymer-coating layers on silica support.     

Effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel was investigated with the monomer amounting from less than monolayer adsorption to more than the equilibrium adsorption. The rate of graft polymerization and the molecular weight of the polymer changed with the amount of monomer adsorbed on silica gel. Maximum grafting efficiency was obtained at monolayer adsorption. The molecular weight of graft polymer was higher than that of homopolymer in both radical and cationic polymerizations, and the ratio in molecular weight of graft polymer to that of homopolymer tends to be unity with increasing amount of adsorbed monomer. These results can mainly be explained in terms of the number of initiating species (radical and cation) that change in relation to the amount of adsorbed monomer. Propagation and termination change with amount of adsorbed monomer in relation to the molecular mobility of adsorbed monomer. A very high-molecular-weight graft polymer is formed only with a small amount of adsorbed monomer in the initial stage. The grafting percent with a large amount of adsorbed monomer increased after most of the monomer has been polymerized. Secondary effect of radiation on the graft and homopolymers due to energy transfer from silica gel is suggested from the complicated phenomena in the later stage of the reaction.     

Interfacial Molecular Imprinting in Nanoparticle-Stabilized Emulsions

A new interfacial nano and molecular imprinting approach is developed to prepare spherical molecularly imprinted polymers with well-controlled hierarchical structures. This method is based on Pickering emulsion polymerization using template-modified colloidal particles. The interfacial imprinting is carried out in particle-stabilized oil-in-water emulsions, where the molecular template is presented on the surface of silica nanoparticles during the polymerization of the monomer phase. After polymerization, the template-modified silica nanoparticles are removed from the new spherical particles to leave tiny indentations decorated with molecularly imprinted sites. The imprinted microspheres prepared using the new interfacial nano and molecular imprinting have very interesting features: a well-controlled hierarchical structure composed of large pores decorated with easily accessible molecular binding sites, group selectivity toward a series of chemicals having a common structural moiety (epitopes), and a hydrophilic surface that enables the MIPs to be used under aqueous conditions.     

Table-salt enabled interface-confined synthesis of covalent organic framework (COF) nanosheets

Two-dimensional covalent organic frameworks (COFs) are gaining tremendous interest for their potential applications in a diversity of fields. However, synthesis of COF nanosheets (CONs) usually suffers from tedious exfoliation processes and low yields. Herein, we present an exfoliation-free and scalable strategy to prepare few-layered CONs based on interface-confined synthesis, in which cheap and recyclable table salt (NaCl) is used as the sacrificial substrate. Salt particles are introduced into the reaction system, creating billions of solid–liquid interfaces. Oligomers formed upon the reaction between monomers are immediately adsorbed on salt surfaces, and the following polymerization leading to crystalline CONs is exclusively confined to salt surfaces. Salts can be easily removed by water washing, producing CONs with the thickness down to a few nanometers and lateral sizes up to hundreds of micrometers depending on the size of salt particles and the concentration of monomers. Four different kinds of CONs, both imine-linked and boron-containing, are synthesized from this generic method. As a demonstration, we prepare highly permeable and selective membranes using resultant CONs as building blocks. Thanks to the defect-free stacking of CONs with thin thicknesses and large lateral sizes on porous substrates, the membranes precisely separate similarly sized dyes while allowing ultrafast water permeation. This interface-confined strategy opens a new platform for the controllable and scalable synthesis of COF nanosheets and is essential for the burgeoning real-world applications of COFs in various fields.

We present an exfoliation-free and scalable strategy to prepare few-layered CONs by the interface-confined synthesis. The resultant CONs are assembled into selective layers for molecular separations.     

Development of a molecularly imprinted polymer for the analysis of avermectin

Five molecularly imprinted polymers (MIPs) were synthesized for a large molecule, avermectin, using different preparation techniques, monomers, and polymerization solvents. Selectivities (α) of each were compared using HPLC and different mobile phases containing various levels of acetic acid. Selectivity (α) for avermectin was greatest (α estimated ≥18) when the polymer was prepared non-covalently (utilizing only non-covalent interactions between avermectin and monomer) in chloroform using methacrylic acid (MAA) monomer and evaluated in chloroform. When evaluated in acetonitrile, an MIP prepared in acetonitrile provided better selectivity (α=8.4) than the polymer prepared in chloroform. Optimizing mobile phase conditions by adding acetic acid was much more important when MIPs were evaluated in chloroform than in acetonitrile. MIPs prepared with MAA provided better selectivity than a polymer prepared with acrylamide monomer. Covalent preparation of two MIPs utilizing a covalent bond between avermectin and monomer before polymerization did not improve selectivity but did improve peak shape in chromatograms. Specificity was demonstrated by comparing the selectivity of avermectin with eprinomectin (α=3.0), a compound with a very similar structure. Results indicate that an MIP can be prepared for the large avermectin molecule, and has the potential to simplify sample preparation and to reduce the time needed for analysis.     

Studies on preparation and properties of NIPAAm/hydrophobic monomer copolymeric hydrogels

A series of thermoreversible copolymeric hydrogels with various molar ratios of N-isopropylacrylamide (NIPAAm) and hydrophobic monomers such as 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate (OFPMA) and n-butyl methacrylate (BMA) were prepared by emulsion polymerization. The effect of hydrophobic monomer on the swelling behavior and mechanical properties of the present copolymeric hydrogels was investigated. Results showed that the equilibrium swelling ratio and critical gel transition temperature (CGTT) decreased with an increase of the content of hydrophobic monomer, but the gel strength of the gel increased with an increase of the content of hydrophobic monomer. Due to stronger hydrophobicity of OFPMA, the NIPAAm/OFPMA copolymeric hydrogels had lower swelling ratios and higher gel strengths than NIPAAm/BMA copolymeric gels.     

Hydrophobically modified polyelectrolytes III. Reactivity ratio determination of FX14/AA,LA/AA and SA/AA

The reactivity ratios of three hydrophobic monomers, FX14, LA and SA, to hydrophilic monomer, acrylic acid (AA), were determined. For the fluorocarbon containing hydrophobic monomer FX14, elemental analysis was adopted to obtain the relative content of FX14 to AA. For two hydrocarbon monomers, ¹³C NMR was used. FR, KT linear method and EVM nonlinear method were applied in calculating reactivity ratios. It is found that the reactivity of LA and SA is lower than that of AA, for solution polymerization in cyclohexane. Whereas FX14 is more reactive than AA in benzene. Finally, the distribution of small amounts of these hydrophobic monomers along the polymeric chain is discussed and a random sequence is confirmed     

Well-defined protein-polymer conjugates via in situ RAFT polymerization

Biotechnology, biomedicine, and nanotechnology applications would benefit from methods generating well-defined, monodisperse protein-polymer conjugates, avoiding time-consuming and difficult purification steps. Herein, we report the in situ synthesis of protein-polymer conjugates via reversible addition-fragmentation chain transfer polymerization (RAFT) as an efficient method to generate well-defined, homogeneous protein-polymer conjugates in one step, eliminating major postpolymerization purification steps. A water soluble RAFT agent was conjugated to a model protein, bovine serum albumin (BSA), via its free thiol group at Cys-34 residue. The conjugation of the RAFT agent to BSA was confirmed by UV-visible spectroscopy, matrix-assisted laser desorption ionization--time of flight (MALDI-TOF), and 1H NMR. BSA-macroRAFT agent was then used to control the polymerization of two different water soluble monomers, N-isopropylacrylamide (NIPAAm) and hydroxyethyl acrylate (HEA), in aqueous medium at 25 degrees C. The growth of the polymer chains from BSA-macroRAFT agent was characterized by size exclusion chromatography (SEC), 1H NMR, MALDI-TOF, and polyacrylamide gel electrophoresis (PAGE) analyses. The controlled character of the RAFT polymerizations was confirmed by the linear evolution of molecular weight with monomer conversion. The SEC analyses showed no detectable free, nonconjugated polymer formation during the in situ polymerization. The efficiency of BSA-macroRAFT agent to generate BSA-polymer conjugates was found to be ca. 1 by deconvolution of the SEC traces of the polymerization mixtures. The structural integrity and the conformation-related esterase activity of BSA were found to be unaffected by the polymerization conditions and the conjugation of the polymer chain. BSA-poly(NIPAAm) conjugates showed hybrid temperature-dependent phase separation and aggregation behavior. The lower critical solution temperature values of the conjugates were found to increase with the decrease in molecular weight of poly(NIPAAm) block conjugated to BSA.     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.     

Vinyl polymerization. 422. Initiation mechanism of uncatalyzed polymerization by polyethyleneglycol

The initiation mechanism on the radical polymerization of vinyl monomers by polyethyleneglycol (PEG-300) in aqueous solution was studied. The initiating radical species were determined by means of the spin trapping technique. They were concluded to be generated by the hydrogen atom transfer from the monomer adsorbed at the ether group of PEG-300 to the free monomer.     

反乌头酸分子印迹聚合物微球的制备及其分子识别功能

以乙腈为分散剂,采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。研究了合成反应条件对聚合物形貌的影响,发现聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。通过振荡吸附法对聚合物的结合特性进行了评价,发现印迹聚合物微球对模板分子的识别选择性优于块状印迹聚合物和非印迹聚合物。     

Synthesis of hydrophilic microspheres with LCST close to body temperature for controlled dual‐sensitive drug release

Novel stimuli‐responsive hydrophilic microspheres were prepared by free radical polymerization of hydroxyethyl methacrylate (HEMA) and methacrylic acid (MA), as hydrophilic monomers, and N‐isopropylacrylamide (NIPAAm) and N,N′‐ethylenebisacrylamide (EBA), as thermo‐sensitive monomer and crosslinker, respectively. Hydrophilic comonomers were introduced in the macromolecular network to synthesize materials with tunable thermal behavior. In addition, by introducing in the polymerization feed both a hydrophilic and a pH‐sensitive monomer, such as MA, dual stimuli‐responsive (pH and temperature) hydrogels were synthesized. The incorporation of monomers in the network was confirmed by infrared spectroscopy, while the network density and the shape of hydrogels was found to strictly depend on the concentration of monomers in the polymerization feed. Thermal analyses showed negative thermo‐responsive behavior with pronounced water affinity of microspheres at a temperature lower than lower critical solution temperature (LCST). In our experiment, the LCST values of the hydrogels were in the range 34.6–37.5°C, close to the body temperature, and the amount of hydrophilic moieties in the polymeric network allows to collect shrinking/swelling transition temperatures higher than the LCST of NIPAAm homopolymers. In order to test the preformed materials as drug carriers, diclofenac diethylammonium salt (DDA) was chosen and drug entrapment percent was determined. Drug release profiles, in media at different temperature and pH, depend on hydrogels crosslinking degree and drug–bead interactions. By using semi‐empirical equations, the release mechanism was extensively studied and the diffusional contribute was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.     

N-异丙基丙烯酰胺对细乳液聚合制备纳米胶囊形态的影响

将N-异丙基丙烯酰胺(NIPAAm)引入小分子烃为模板的苯乙烯细乳液聚合法制备纳米胶囊的体系.水相引发形成的聚异丙基丙烯酰胺(PNIPAAm)低聚物自由基在聚合温度下(大于其最低临界溶解温度)析出并被苯乙烯细乳液液滴吸附,在热力学推动力和静电斥力的共同作用下,PNIPAAm低聚物倾向于分布在液滴和水的界面上,使液滴界面成为主要的聚合场所,单体从液滴内部向界面扩散补充消耗的单体,生成的聚合物在液滴界面上析出,包覆小分子烃液滴,最终得到纳米胶囊.通过透射电镜观察粒子形态和大小;利用接触角测定仪测定了细乳液液滴的表面张力.考察了NIPAAm用量、油溶性单体/小分子烃比例、交联剂用量及乳化剂和引发剂对的种类对胶囊形态的影响.     

Development of a molecularly imprinted polymer for pyridoxine using an ion-pair as template

One of the main challenges in the molecularly imprinted polymers (MIP) field is the proper MIP design for water-soluble compounds because of appearance of serious drawbacks in polar solvents and insolubility of those compounds in non-polar solvents which are commonly used for MIP synthesis. In this work a novel and simple method for synthesis of molecularly imprinted polymers for a water-soluble compound was introduced. Pyridoxine was chosen as a target molecule and the ion-pair complex formed between pyridoxine ion (Py⁺) and dodecyl sulfate ion (DS⁻) was transferred into the chloroform via liquid-liquid extraction. Then polymerization was carried out in chloroform. The molecular mechanics and density functional theory were proposed to screen proper monomer. Binding energy, ΔE, of a template and a monomer as a measure of their interaction was considered. Ion-pair [Py⁺-DS⁻] was supposed as a template molecule and acrylic acid, methacrylic acid, allyamine, vinylpridine and 2-hydroxy ethyl methacrylate were as tested monomers. The MIP synthesized using acrylic acid showed the highest selectivity to pyridoxine as predicted from the ΔE calculation. The obtained MIP showed very high affinity against vitamin B6 in comparison to non-imprinted polymers (NIP). It was proved that the obtained MIP with introduced method was much better than that prepared in methanol as porogen. It was showed that the MIP prepared by this new method could be used as an adsorber for extraction and determination of pyridoxine in real and synthetic samples.     

Photoinitiated polymerization of columnar stacks of self-assembled trialkyl-1,3,5-benzenetricarboxamide derivatives

A disk-shaped molecule, N-(5-sorbyl-pentyl)-N',N"-di(n-octyl)benzene-1,3,5-tricarboxamide (1), has been synthesized and assembled into a columnar stack in cyclohexane. Using a photoinitiated process, we polymerized monomer 1 in its self-assembled state and analyzed the resulting poly-1. On cooling a boiling cyclohexane solution of 1, the molecules aggregate via amide hydrogen bonds, as supported by the position of the N-H stretching band in FT-IR spectroscopy. Evidence of helical columnar stacking of 1 in the aggregate is provided by an induced CD effect upon blending 1 with a chiral side-chain homologue 3 in a so-called "sergeants and soldiers" experiment. The columnar assembly in cyclohexane was polymerized by UV light (365 nm) irradiation in the presence of 2,2-dimethoxy-2-phenylacetophenone as radical photoinitiator. The polymerization occurs selectively to give 1,4-polymer with isolated trans C=C bonds, as shown by FT-IR, and (1)H and (13)C NMR spectroscopy. Lack of polymerization of methyl sorbate (4) under identical conditions, and low incorporation of 4 in copolymerizations with 1 in cyclohexane, suggests that the polymerization preferentially occurs within the columnar assembly. Size exclusion chromatography shows that the degree of polymerization (X(n)()) based on number average molecular weight is approximately 65. Incorporation of small amounts of nonpolymerizable derivatives 2 and 3 into the columns has no effect on X(n)() and conversion. Molecular models show that the polymerizable sidearm of 1 is long enough to span the distance between the monomers in the chiral stack. Under the atomic force microscope (AFM), purified samples of polymerized 1 displayed nanometer-sized fibrous morphologies with a high-axial-ratio (>150), uniform width (60 nm), and a thickness (1.0 nm) which corresponds to the width of the benzene tricarboxamide core of 1, whereas aggregates of nonpolymerized 1 yield a featureless image due to their instability.