Synthesis and characterization of superhydrophobic functionalized Cu(OH)2 nanotube arrays on copper foil

Superhydrophobic functionalized cupric hydroxide (Cu(OH)₂) nanotube arrays were prepared on copper foils via a facile alkali assistant surface oxidation technique. Thus nanotube arrays of Cu(OH)₂ were directly fabricated on the surface of copper foil by immersing in an aqueous solution of NaOH and (NH₄)₂S₂O₈. The wettability of the surface was changed from surperhydrophilicity to superhydrophobicity by chemical modification with 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS). The morphologies, microstructures, crystal structure, chemical compositions and states, and hydrophobicity of the films on the copper foil substrates were analyzed by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. It was found that the rough structure of the surface helped to magnify the wettability. The static contact angle (CA) for water is larger than 160° and the contact angle hysteresis (CAH) is lower than 5° on the modified surface. The high roughness of the nanotube arrays along with the generated C-F chains by chemical modification contributed to the improved superhydrophobicity. The present research is expected to be significant in providing a new strategy for the preparation of novel multifunctional materials with potential industrial applications on copper substrates.     

Facile preparation of superhydrophobic copper surface by HNO3 etching technique with the assistance of CTAB and ultrasonication

Superhydrophobic rough structure was prepared on copper wafer via HNO₃ etching technique with the assistance of Cetyltrimethyl Ammonium Bromide (CTAB) and ultrasonication. After modification of 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FDTES), the copper wafer showed stable superhydrophobicity. The morphologies, chemical compositions and hydrophobicity of the substrates were analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. Dense and spherical micropits appeared on copper wafer after it was etched by 5 M nitric acid with 1.2 mM CTAB under ultrasonication for 20 min. The SEM results indicated that the joint action of CTAB and ultrasonication caused the formation of dense and spherical micropits.     

Heats of solution/substitution in TlNO3 and CsNO3 crystals and in RbNO3 and CsNO3 crystals from heats of transition: the complete phase diagrams of TlNO3-CsNO3 and RbNO3-CsNO3 systems

From measurements of the decrease in the heat (enthalpy) of transition in the solid phase using differential scanning calorimetry, the apparent molar heats of solution, slope ΔH_t/x, the partial molar heats of solution at infinite dilution, χ, and the heats of solution, ΔH_s^°, of Tl⁺ in CsNO₃ crystal and Cs⁺ in TlNO₃ crystal and Rb⁺ in CsNO₃ crystal and Cs⁺ in RbNO₃ crystal along with their recovered lattice energies, ΔH_L^°, are reported. ΔH_s^° of Tl⁺ and Rb⁺ in CsNO₃ crystal are each found to be negligible or zero representing an ideal solid solution, i.e. ΔH_mix=0. The complete phase diagrams of the TlNO₃-CsNO₃ and RbNO₃-CsNO₃ systems with details of the sub-solidus regions are included. The properties of Tl_(1−x)Cs_xNO₃ and Rb_(1−x)Cs_xNO₃ compositions are discussed in terms of a ‘mixed crystal’ or ‘crystalline solid solution’ in relation to parallel compositions of Tl_(1−x)Rb_xNO₃.     

Crystal structure and ferromagnetism of (n-C3H7)4N[CoFe(dto)3] (dto=C2O2S2)

Recently, we have discovered a new type of first order phase transition around 120 K for (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] (dto=C₂O₂S₂), where the charge transfer transition between Fe^II and Fe^III occurs reversibly. In order to elucidate the origin of this peculiar first order phase transition. Detailed information about the crystal structure is indispensable. We have synthesized the single crystal of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃] whose crystal structure is isomorphous to that of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃], and determined its detailed crystal structure. Crystal data: space group P6₃, a=b=10.044(2) Å, c=15.960(6) Å, α=β=90°, γ=120°, Z=2 (C₁₈H₂₈NS₆O₆FeCo). In this complex, we found a ferromagnetic transition at T_c=3.5 K. Moreover, on the basis of the crystal data of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃], we determined the crystal structure of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] by simulation of powder X-ray diffraction results.     

Paramagnetic properties of several rare earth compounds with K3Ln2(NO3)9 structure

We present measurements of the paramagnetic susceptibilities of K₃Pr₂(NO₃)₉ and K₃Sm₂(NO₃)₉, cubic materials with rare earth sites having threefold rotational symmetry about (111). The rare earth environment resembles that of the Ln₂Mg₃(NO₃)₁₂·24H₂O materials, and the magnetic susceptibilities show similarities but also interesting differences with Pr₂Mg₃(NO₃)₁₂·24H₂O and Sm₂Mg₃(NO₃)₁₂·24H₂O. Paramagnetic resonance experiments in K₃La₂(NO₃)₉ doped with these and several heavier lanthanides are also described and compared with theory.     

Synthesis and characterization of Co7(OH)12(C2H4S2O6)(H2O)2—a single crystal structural study of a ferrimagnetic layered cobalt hydroxide

A novel layered hydrotalcite-like material, Co₇(H₂O)₂(OH)₁₂(C₂H₄S₂O₆), has been prepared hydrothermally and the structure determined using single crystal X-ray diffraction (a=6.2752(19) Å, b=8.361(3) Å, c=9.642(3) Å, α=96.613(5)°, β=98.230(5)°, γ=100.673(5)°, R1=0.0551). The structure consists of brucite-like sheets where 1/6 of the octahedral sites are replaced by two tetrahedrally coordinated Co(II) above and below the plane of the layer. Ethanedisulfonate anions occupy the space between layers and provide charge balance for the positively charged layers. The compound is ferrimagnetic, with a Curie temperature of 33 K, Curie-Weiss θ of −31 K, and a coercive field of 881 Oe at 5 K.     

Synthesis, crystal structure, Cu doped EPR, thermal and voltammetric studies of [Ni(isonicotinamide)2(H2O)4]·(sac)2 single crystal

The single crystal of [Ni(ina)₂(H₂O)₄]·(sac)₂, (NINS), (ina is isonicotinamide and sac is saccharinate) complex has been prepared and its structural, spectroscopic and thermal properties have been determined. The title complex crystallizes in monoclinic system with space group P2₁/c, Z=2. The octahedral Ni(II) ion, which rides on a crystallographic centre of symmetry, is coordinated by two monodentate ina ligands through the ring nitrogen and four aqua ligands to form discrete [Ni(ina)₂(H₂O)₄] unit, which captures two saccharinate ions in up and down positions, each through intermolecular hydrogen bands. The magnetic environment of copper(II) doped NINS crystal has also been identified by electron paramagnetic resonance (EPR) technique. The g and A values of Cu²⁺ doped NINS single crystal were calculated from the EPR spectra recorded in three mutually perpendicular planes. These values indicated that the paramagnetic centre has a rhombic symmetry with the Cu²⁺ ion having distorted octahedral environment. The complex exhibits only metal centred electroactivity in the potential range of −2.00, 1.25 V versus Ag/AgCl reference electrode.     

Thermochemical behavior of metallic citrate precursors for the production of pure LaAlO3

Pure LaAlO₃ nanoparticles were synthesized, using a citrate-precursor technique. La(NO₃)₃, Al(NO₃)₃, and C₃H₄(OH)(COOH)₃, in a molar ratio of 1:1:4.5, were dissolved in deionized water. The pH of the aqueous solution was adjusted using NH₄OH. After drying, the citrate precursors were charred at 350 °C, followed by calcination at different temperatures. The thermochemical behavior of the charred citrate precursor to form LaAlO₃ was investigated using X-ray diffractometry, infrared spectroscopy, thermogravimetric analysis, and differential thermal analysis. While the charred specimen obtained at pH=2 (without NH₄OH addition) was composed of LaAl(OOCH₂)₃, the charred specimens obtained at pH>2 were composed of LaAlO_3−x−y(CO₃)_x(OH)_2y. All these metallic salts were decomposed at temperatures between 600 and 780 °C to form crystalline LaAlO₃ but calcining the specimens in air at ?800 °C were required to remove all residual chars to produce pure LaAlO₃. At 900 °C, the citrate-derived particles obtained at pH>2 were composed of LaAlO₃ crystallites with an average size of ∼30 nm.     

Antiferromagnetic transition in botallackite Cu2Cl(OH)3

The natural cuprate botallackite, Cu₂Cl(OH)₃, is found to be a new antiferromagnet with Magnetic susceptibility properties under strong field show non-linear M-H properties indicating metamagnetism. The T_N and the super-exchange coupling are discussed and compared with its polymorph atacamite and other copper oxides on the basis of their structural parameters.     

Structural characterisation of [Cu2(bptd) (H2O) Cl4] and [Ni2(bptd)2(H2O)4] Cl4·3H2O; evidence of null intramolecular exchanges by EPR and magnetic measurements

Using the 2,5-bis(2-pyridyl)-1,3,4-thiadiazole (bptd), we recently prepared [Cu₂(bptd) (H₂O) Cl₄] and [Ni₂(bptd)₂ (H₂O)₄] Cl₄, 3H₂O in which the magnetic centres are connected through one diazine+one chloro and two diazine ligand bridges, respectively. These two compounds are the first examples that show null intramolecular magnetic interactions despite M-M distances close to 3.7 Å within perfectly planar edifices:Down to , [Cu₂(bptd)Cl₄(H₂O)] is paramagnetic while, below T_t, half of the Cu²⁺ions interact, leading to residual paramagnetism of one Cu²⁺/f.u. Magnetic susceptibility measurements, EPR and pulsed EPR study indicate the original intermolecular nature of AF exchanges.[Ni₂(bptd)₂(H₂O)₄]Cl₄·3H₂O susceptibility obeys a Curie-law involving pure paramagnetism. Moreover, its EPR spectrum can be interpreted on the basis of virtual S=1 monomers. Below 70 K, Zero Field Splitting (D∼275 G) due to dipolar interactions without magnetic exchanges could be responsible for the LT spectra splitting. For both compounds, the thia role is suggested as partially responsible for the null-in-plane magnetic exchanges.     

Magnetic phase diagram of Ni(NO3)2 6NH3

The magnetic phase diagram of Ni(NO₃)₂6NH₃ was determined from the field and temperature dependence of the magnetic susceptibility. The zero temperature exchange and anisotropy fields were determined to be H_E(0) ≈ 26 kOe and H_A(0) ≈ 0.7 kOe respectively.     

AP/(N2 + C2H2 + C2H4) gaseous fuel diffusion flame studies

Counterflow diffusion flame experiments and modeling results are presented for a fuel mixture consisting of N₂, C₂H₂, and C₂H₄ flowing against decomposition products from a solid AP pellet. The flame zone simulates the diffusion flame structure that is expected to exist between reaction products from AP crystals and a hydrocarbon binder. Quantitative species and temperature profiles have been measured for one strain rate, given by a separation of 5 mm, between the fuel exit and the AP surface. Species measured include C₂H₂, C₂H₄, N₂, CN, NH, OH, CH, C₂, NO, NO₂, O₂, CO₂, H₂, CO, HCl, H₂O, and soot volume fraction. Temperature was measured using a combination of a thermocouple at the fuel exit and other selected locations, spontaneous Raman scattering measurements throughout the flame, NO vibrational populations, and OH rotational population distributions. The burning rate of the AP was also measured for this flame’s strain rate. The measured eighteen scalars are compared with predictions from a detailed gas-phase kinetics model consisting of 105 species and 660 reactions. Model predictions are found to be in good agreement with experiment and illustrate the type of kinetic features that may be expected to occur in propellants when AP particles burn with the decomposition products of a polymeric binder.     

Spectroscopy of Ca3(BO3)2: Dy crystal

Dy³⁺: Ca₃(BO₃)₂ crystal was grown successfully by the Czochraski technique. The absorption spectrum was measured and its absorption peaks were assigned. The Judd-Ofelt intensity parameters were found to be Ω₂=5.216×10⁻²⁰, Ω₄=1.858×10⁻²⁰, Ω₆=0.623×10⁻²⁰ cm². The spectroscopic parameters of this crystal such as the oscillator strengths, radiative transition probabilities, radiative lifetime as well as the branching ratios were calculated. Also, room temperature luminescence decay curve in correspondence with the emission line ⁴F_9/2→⁶H_13/2 centered at 575 nm was measured.     

Preparation of superhydrophobic films on titanium as effective corrosion barriers

Stable superhydrophobic films were prepared on the electrochemical oxidized titania/titanium substrate by a simple immersion technique into a methanol solution of hydrolyzed 1H,1H,2H,2H-perfluorooctyltriethoxysilane [CF₃(CF₂)₅(CH₂)₂Si(OCH₂CH₃)₃, PTES] for 1 h at room temperature followed by a short annealing at 140 °C in air for 1 h. The surface morphologies and chemical composition of the film were characterized by means of water contact angle (CA), field emission scanning electron microscopy (FESEM), atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS). The water contact angle on the surface of this film was measured to be as high as 160°. SEM images showed that the resulting surfaces exhibited special hierarchical structure. The special hierarchical structure along with the low surface energy leads to the high surface superhydrophobicity. The corrosion resistance ability and durance property of the superhydrophobic film in 3.5 wt.% NaCl solution was evaluated by the electrochemical impedance spectroscopy (EIS). The anticorrosion properties of the superhydrophobic film are compared to those of unmodified pure titanium and titania/titanium substrates. The results showed that the superhydrophobic film provides an effective corrosion resistant coating for the titanium metal even with immersion periods up to 90 d in the 3.5 wt.% NaCl solution, pointing to promising future applications.     

Facile fabrication of Zn/Zn5(OH)8Cl2·H2O flower-like nanostructure on the surface of Zn coated with poly (N-methyl pyrrole)

Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructures was electrodeposited on the coated Zn with poly (N-methyl pyrrole) in 0.1 M Zn (NO₃)₂ and 0.1 M KCl solution. The morphology and the structure of the Zn/Zn₅(OH)₈Cl₂·H₂O were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction analysis (XRD). The FT-IR results showed special peaks at 908 and 728 cm⁻¹ related to Zn₅(OH)₈Cl₂·H₂O. The FESEM results indicated that Zn/Zn₅(OH)₈Cl₂·H₂O consists of a flower-like nanostructure and these flower-shaped structures contain many shaped nanopetals with the thickness of 27.8 nm. The XRD result confirmed that the major phase of electrodeposited product in 0.1 M KCl as supporting electrolyte was Zn₅(OH)₈Cl₂·H₂O. The ability of PMPy to create a thin film and the existence of several pores in its matrix act as a mold for the growth of Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructure. The trapping of Cl⁻ and OH⁻ within pores can be considered as the reason for the formation of flowerlike Zn/Zn₅(OH)₈Cl₂·H₂O nanostructures in 0.1 M KCl.     

Structural, vibrational and dielectric properties of new potassium hydrogen sulfate arsenate: K4(SO4)(HSO4)2(H3AsO4)

A new compound, K₄(SO₄)(HSO₄)₂(H₃AsO₄) was synthesized from water solution of KHSO₄/K₃H(SO₄)₂/H₃AsO₄. This compound crystallizes in the triclinic system with space group P1¯ and cell parameters: a=8.9076(2) Å, b=10.1258(2) Å, c=10.6785(3) Å; α=72.5250(14)°, β=66.3990(13)°, γ=65.5159(13)°, V=792.74(3) Å³, Z=2 and ρ_cal=2.466 g cm⁻³. The refinement of 3760 observed reflections (I>2σ(I)) leads to R₁=0.0394 and wR₂=0.0755. The structure is characterized by SO₄²⁻, HSO₄⁻ and H₃AsO₄ tetrahedra connected by hydrogen bridge to form two types of dimer (H(16)S(3)O₄⁻?S(1)O₄²⁻ and H(12)S(2)O₄⁻?H₃AsO₄). These dimers are interconnected along the [1¯ 1 0] direction by the hydrogen bonds O(3)-H(3)?O(6). They are also linked by the hydrogen bridge assured by the hydrogen atoms H(2), H(3) and H(4) of the H₃AsO₄ group to build the chain S(1)O₄?H₃AsO₄ which are parallel to the “a” direction. The potassium cations are coordinated by eight oxygen atoms with K-O distance ranging from 2.678(2) to 3.354(2) Å.Crystals of K₄(SO₄)(HSO₄)₂(H₃AsO₄) undergo one endothermic peak at 436 K. This transition detected by differential scanning calorimetry (DSC) is also analyzed by dielectric and conductivity measurements using the impedance spectroscopy techniques. The obtained results show that this transition is protonic by nature.     

Crystal structure and thermal behavior of two new organic monosulfates NH3(CH2)5NH3SO4 1.5H2O and NH3(CH2)9NH3SO4 H2O

The chemical preparation, the calorimetric studies and the crystal structure are given for two new organic sulfates NH₃(CH₂)₅NH₃SO₄ 1.5H₂O (DAP-S) and NH₃(CH₂)₉NH₃SO₄·H₂O (DAN-S). DAP-S is monoclinic P2₁/n with unit cell dimensions: a=11.9330(2) Å; b=10.9290(2) Å; c=17.5260(2) Å; β=101.873(1)°; V=2236.77(6) Å³; and Z=8. Its atomic arrangement is described as inorganic layers of units and water molecules separated by organic chains. DAN-S is monoclinic P2₁/c with unit cell parameters: a=5.768(2) Å; b=25.890(10) Å; c=11.177(5) Å; β=115.70(4)°; V=1504.0(11) Å³ and Z=4. Its structure exhibits infinite chains, parallel to the [100] direction where the organic cations are interconnected. In both structures a network of strong and weak hydrogen bonds connects the different components in the building of the crystal.     

Thermal decomposition and electrical conductivity of M(OH)3 and MOOH (M=Y, lanthanide)

The thermal decomposition of M(OH)₃ (M=Y, La, Nd, Sm, Gd) with the Y(OH)₃ structure was examined by the TG and DTA methods. Y(OH)₃, Nd(OH)₃, and Sm(OH)₃ decomposed to MOOH and then to M₂O₃. The decomposition of La(OH)₃ and Gd(OH)₃ occurred via the following schemes: La(OH)₃→LaOOH→La₂O₃·1/2H₂O→La₂O₃, and Gd(OH)₃→Gd₂O₃·3/2H₂O→GdOOH→Gd₂O₃. The highest conductivity of 5.9×1o^?9Scm^?1 at 250°C was found in Gd(OH)₃ and that of 8.9×10^?7 S cm^?1 400°C in GdOOH. The continuous-wave ¹H NMR absorption spectrum of LaOOH at room temperature exhibited no doublet line shape. This shows that protons are magnetically isolated from each other, and very little H₂O and H₃O⁺ can exist.     

Esca studies of Ga,As, GaAs,Ga2O3, As2O3 and As2O5

The binding energies of Ga 3d, As 3d, Ga L₃M₄,₅M₄,₅ and O 1s in Ga, As, GaAs, Ga₂O₃, As₂O₃ and As₂O₅ are reevaluated by means of ESCA. The calibration lines of the C 1s and the Au 4f_{$\text{7}\text{2}$} gave different binding energies for the compound materials. In order to determine the absolute binding energies, the chemical shifts in Auger and photoelectron lines from a layered structure composed of thin layer oxide and substrate of a defined material were used. An energy calibration curve, E(Ga 3d) vs. ΔE(GA LMM - Ga 3d), was found to be useful for determination of binding energies in the material which contains gallium. In the case of the GaAs sample, both the chemical etching and the ion bombardment effects on the chemical structure of the GaAs surface are also discussed.     

Synthesis and characterization of a new monophosphate [2,5-(CH3)2C6H3NH3]H2PO4

Chemical preparation, calorimetric studies, crystal structure and spectroscopic investigations are given for a new noncentrosymmetric organic cation monophosphate [2,5-(CH₃)₂C₆H₃NH₃]H₂PO₄. This compound is orthorhombic P2₁2₁2₁ with the following unit-cell parameters: a=5.872(4), b=20.984(3), c=8.465(1) Å, Z=4, V=1043.0(5) Å³ and D_x=1.396 g cm⁻³. Crystal structure has been solved and refined to R=0.048 using 2526 independent reflections. Structure can be described as an inorganic layer parallel to (a,b) planes between which organic groups [2,5-(CH₃)₂C₆H₃NH₃]⁺ are located. Multiple hydrogen bonds connecting the different entities of compound thrust upon three-dimensional network a noncentrosymmetric configuration.