A simple linear sweep voltammetric method for the determination of double-stranded DNA with malachite green

In pH 3.5 Britton—Robinson buffer solution double-stranded (ds) DNA can react with malachite green (MG) to form an interaction complex, which resulted in the decrease of the electrochemical response of MG, MG had a well-defined second-order derivative linear sweep voltammetric peak at −0.73 V (vs. SCE). After the addition of dsDNA into MG solution, the reductive peak current decreased with the positive shift of peak potential, which was the typical characteristic of intercalation. Based on the interaction, an indirect electrochemical determination method for dsDNA was established. The optimum conditions for the reaction were investigated and there were little or no interferences from the commonly coexisting substances. The decrease of peak current was linear with the concentration of dsDNA over the range of 0.8–12.0 μg cm⁻³ with the linear regression equation as ΔI _p″/nA = 91.70 C/(μg cm⁻³) + 74.55 (n = 10, γ = 0.990). The detection limit was calculated as 0.46 μg cm⁻³ (3σ). The method had high sensitivity and was further applied to the dsDNA synthetic samples with satisfactory result. The interaction mechanism was discussed with the intercalation of DNA-MG to form a supramolecular complex and the stoichiometry of the supramolecular complex was calculated by electrochemical method with the binding number 3 and the binding constant 2.35 × 10¹⁵ (mol dm⁻³)⁻³.     

Theoretical study of the conformational states of triosmium clusters with a chiral µ-1-NH pinane ligand

This paper reports a theoretical investigation of the conformations of triosmium clusters with a chiral pinane ligand (μ-H)Os₃(CO)₁₀(μ-NHC₁₀H₁₇). The potential curves of internal rotation of the organic ligand relative to the N-C bond are plotted for the cluster complexes. The structures of possible conformers are considered, and reasons for their stability are revealed. The barrier of rotation around the N-C bond of the terpenoid is 186.6 kJ/mol for crystals and ∼140 kJ/mol for solutions. Due to this, the free rotation of the ligand is hindered in both cases. The effects of the intra-and intermolecular interactions on the conformational state of the cluster complex are analyzed. Original Russian Text Copyright ? 2007 by V. A. Potemkin, V. A. Maksakov, and V. S. Korenev __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 230–235, March–April, 2007.     

Determination of vanadium content in soils by slurry sampling electrothermal atomic absorption spectrometry using KO300G as the stabilizing agent

A direct and sensitive method for the determination of vanadium concentrations in soil is developed using ultrasonic slurry sampling electrothermal atomic absorption spectrometry (USSSETAAS). The surfactant, KO300G, is used as the stabilizing agent. The precision and accuracy of the method are investigated. The detection limits are 0.6 and 0.7 μg 1⁻¹ for SRM Montana Soil 2711 and SRM Soil — S, respectively. The method is applied to determine the vanadium content in 10 soil samples from the Wielkopolska region.     

Synthesis and characterization of poly(styrene/α-t-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Polystyrene microspheres with polyglycidol (polyGL) in a surface layer were synthesized in batch radical emulsifier-free emulsion copolymerizations of styrene and surfmers, α-t-butoxy-ω-vinylbenzyl-polyGL macromonomers (VB-polyGL). Macromonomers with number-average molecular weight Mˉ _n=950 (VB-polyGL950) and Mˉ _n=2700 (VB-polyGL2700) were used for these polymerizations. In all syntheses the initial concentrations of styrene and initiator (K₂S₂O₈) were constant. The initial macromonomer-to-styrene ratios were varied from 1.10 × 10⁻³ to 1.64 × 10⁻² mol/mol and from 3.46 × 10⁻⁴ to 3.47 × 10⁻³ mol/mol for VB-polyGL950 and VB-polyGL2700, respectively. The diameters of microspheres obtained were smaller for the syntheses with higher concentrations of macromonomers. Syntheses with VB-polyGL950 yielded microspheres with number-average diameters (Dˉ _n) from 216 to 900 nm and with a bimodal diameter distribution. The number-average diameters of microspheres obtained with VB-polyGL2700 varied from 220 to 650 nm, depending on the initial concentration of macromonomer. Their diameter distributions were monomodal, with a diameter polydispersity parameter (ratio of weight-average and number-average diameters) in the range 1.007≤Dˉ _w/Dˉ _n≤1.022. For each type of microsphere the fraction of polyGL in a surface layer and the surface concentration of sulfate anions were determined. The fraction of polyGL in the surface layer was related to the initial monomer composition in the polymerizing mixture. Adsorption of human serum albumin onto surfaces of some poly(styrene/VB-polyGL) microspheres was up to 10 times lower than for the polystyrene microspheres obtained in a similar emulsifier-free emulsion polymerization of styrene. Received: 26 September 2000/Accepted: 19 February 2001     

Study of Solid Phase Extraction Prior to Spectrophotometric Determination of Platinum with N-(3,5-Dimethylphenyl)-N′-(4-Aminobenzenesulfonate)-Thiourea

A highly sensitive, selective and rapid method for the determination of platinum based on the rapid reaction of platinum(IV) with N-(3,5-dimethylphenyl)-N′-(4-aminobenzenesulfonate)-thiourea (DMMPT) and the solid phase extraction of the Pt(IV)-DMMPT complex with C₁₈ membrane disks was developed. In the presence of pH = 3.8 buffer solution and cetyl trimethylammonium bromide (CTMAB) medium, DMMPT reacts with platinum to form a violet complex of a molar ratio of 1:3 (platinum to DMMPT). This complex was enriched by solid phase extraction with C₁₈ membrane disks, and an enrichment factor of 200 was obtained. The molar absorptivity of the complex is 9.51 × 10⁴ L · mol⁻¹ · cm⁻¹ at 755 nm, and Beer’s law is obeyed in the range of 0.01–3.0 μg mL⁻¹ in the measured solution. The relative standard deviation for eleven replicate samples of 0.01 μg mL⁻¹ level is 1.79%. The detection limit reaches 0.02 μg L⁻¹ in the original samples. This method was applied to the determination of platinum in water and soil samples. The relative standard deviations are 2.9–3.4%. The recoveries are 94–105%. The values of determination obtained agree with those of the ICP-MS method. The results are satisfactory.     

Electrochemical Behavior of a Gold Electrode Modified with SWNTs/DDAB Films and Its Electrocatalytic Activity Towards Ascorbic Acid

A film of single-wall carbon nanotubes (SWNTs) and didodecyldimethylammonium bromide (DDAB) is prepared by casting a solution of SWNTs and DDAB onto the surface of a gold electrode. The electrochemical behavior of the film is investigated by electrochemical impedance spectroscopy and cyclic voltammetry. In a 0.10 M phosphate buffer solution of pH 7.0, the film-modified electrode gives a pair of redox peaks in cyclic voltamograms, with the anodic and cathodic peak potentials of 0.095 and 0.042 V. The peak currents change linearly with the scan rate at 30–500 mV/s. The modified electrode has an excellent electrocatalytic activity towards the oxidation of ascorbic acid (AA). The catalysis currents are proportional to the AA concentration in the range of 5.0 × 10⁻⁴ to 3.2 × 10⁻² M. The linear-regression equation is i (μA) = 1.2079 + 1.3987 × 10³ c _AA (M), with a correlation coefficient of 0.9995. The detection limit is 2.2 × 10⁻⁴ M (signal-to-noise ratio of 3). The Michaelis-Menten constant (K _m) is 1.0 × 10⁻⁴ M by the Lineweaver-Burk equation. __________ From Elektrokhimiya, Vol. 41, No. 10, 2005, pp. 1193–1199. Original English Text Copyright ? 2005 by Cheng, Jin, Zhang. The text was submitted by the authors in English.     

Praseodymium β-diketonates and luminescence properties of their solutions

The luminescence intensity of Pr(III) in a series of complexes with alkyl and thienyl fluoroacetylacetone derivatives has been shown to increase not only with an increase in the length of the fluoroalkyl radical but also with the introduction of an oxygen heteroatom into this radical. The luminescence intensity of Pr(III) increases by about two orders of magnitude when a donor ligand (an organic solvent) is introduced into the complex. In some cases, the triplet level of β-diketone become higher due to interligand energy transfer and the Pr(III) luminescence occurs from two emitting levels ¹ D ₂ (the ¹ D ₂ → ³ H ₄ transition, λ_lum = 605 nm) and ³ P ₀ (the ³ P ₀ → ³ H ₆ transition, λ = 612 nm). Heteroleptic Pr(III) β-diketonates have short lifetimes (τ); for example, the lifetime of the Pr(III) complex with thenoyltrifluoroacetone and diantipyrylmethane is shorter than 1 μs. Original Russian Text ? S.B. Meshkova, A.V. Kiriak, Z.M. Topilova, A.M. Andrianov, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 4, pp. 614–619.     

Synthesis and Crystal Structure of [Mn2(H2sal)2(Hsal)2(H2O)4]. First Example of the Reductive Synthesis of a Binuclear Manganese(I) Salicylate Complex

The synthesis and characterization of the first unique binuclear manganese(I) salicylate complex is described. The structure of the complex is unequivocally established with the help of an X-ray crystallographic study. The structure consists of two [MnO₆] units, containing octahedral Mn^I ions, linked together by a bridging salicylato (Hsal⁻) ligand and each Mn^I is chelated with a (H₂sal) ligand. The complex possesses a metal oxidation state of +1 and is a rare example of a noncarbonyl or cyanide complex of a binuclear Mn^I species. The effective magnetic moment per binuclear molecule (μ_eff. at 27 °C is 8.07 μ_b, that also describes the manganese (+1) oxidation state.     

Thermal and Spectral Behaviour of 5-chloro-2-methoxybenzoates of Heavy Lanthanides and Yttrium

5-Chloro-2-methoxybenzoates of heavy lanthanides and yttrium were obtained as di- or tetrahydrates with a metal to ligand ratio of 1:3 and general formula: Ln(C₈H₆ClO₃)₃⋅nH₂O, where n=2 for Ln=Tb, Dy, Y and n=4 for Ln=Ho, Er, Tm, Yb, Lu. The complexes were characterized by elemental analysis, IR and FIR spectra, thermogravimetric studies, X-ray diffraction and magnetic measurements. The carboxylate group appears to be a symmetrical, bidentate, chelating ligand. All complexes are polycrystalline compounds. Their thermal stabilities were determined in air and in nitrogen atmospheres. When heated they dehydrate to form anhydrous salts which next in air are decomposed to the oxides of the respective metals while in nitrogen to the mixtures of carbon and oxides or carbon and oxychlorides of respective metals. The complexes are more stable in air than in nitrogen. The solubilities of yttrium and heavy lanthanide 5-chloro-2-methoxybenzoates in water at 293 K are of the order of 10^–3 mol dm^–3 The magnetic moments of the complexes were determined over the range 77–298 K. They obey the Curie–Weiss law. The values of μ_eff calculated for all compounds are close to those obtained for Ln³⁺ by Hund and Van Vleck. The results indicate that there is no influence of the ligand field of 4f electrons on lanthanide ions and the metal ligand bonding is mainly electrostatic in nature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH<Subscript>2</Subscript>NHC(O)NH<Subscript>2</Subscript>)<Subscript>2</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH₂NHC(O)NH₂)₂](NO₃)₂ has been studied by X-ray diffraction. Monoclinic crystals, a = 6.835(2) Å, b = 7.733(2) Å, c = 10.320(3) Å, β = 105.701(3)°, V = 525.1(2) ų, space group P2₁/c, Z = 2, d _msd = 2.136 g/cm³, μ(MoK _α) = 2.143 mm⁻¹. The structure was solved with the program for automatic analysis of Patterson’s function and refined by full-matrix least squares in an anisotropic approximation for all non-hydrogen atoms using 753 independent reflections; R ₁ = 0.0203. The square environment of the Cu atom is formed from the amino nitrogen atoms of the hydrazine fragments and the C=O oxygen atoms of the two semicarbazide bidentate molecules (Cu-N 1.928 Å, Cu-O 1.999 Å). The axial positions are occupied by the O atoms of the NO ₃ ⁻ outer-spheric anions (Cu-O 2.505 Å). In the structure, the complex cations and the NO ₃ ⁻ anions are linked into a framework by N-H...O type hydrogen bonds. Original Russian Text Copyright ? 2007 by G. V. Romanenko, Z. A. Savelieva, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 370–373, March–April, 2007.     

Syntheses, characterization, and structure determination of nine-coordinate Na[YIII(edta)(H2O)3]· 5H2O and eight-coordinate Na[YIII(cydta)(H2O)2]·5H2O complexes

Syntheses and structure determination of the Y^III complexes with ethylenediaminetetraacetic acid (H₄edta) and trans-1,2-cyclohexanediaminetetraacetic acid (H₄cydta) are reported. The crystal and molecular structures of the complexes, as well as their molecular formulas and compositions, were determined by single-crystal X-ray structure analyses, NMR, IR, thermogravimetric measurements, and elementary analyses. The crystal of the Na[Y^III(edta)(H₂O)₃]·5H₂O complex belongs to the orthorhombic crystal system and space group Fdd2. The crystal data are as follows: a = 19.355(5) Å, b = 35.431(11) Å, c = 12.122(3) Å, V = 8313(4) ų, Z = 16, M = 544.23, D_c = 1.739 g·cm⁻³, μ = 2.908 mm⁻¹ and F(000) = 4480. The final R and Rw are 0.0483 and 0.1172 for 3284 (I > 2σ(I)) unique reflections, R and Rw are 0.0678 and 0.1440 for all 8499 reflections, respectively. The Y^IIIN₂O₇ part in the [Y^III(edta)(H₂O)₃]⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure, in which the six coordinated atoms (two N and four O) from the edta ligand and three water molecules are coordinated to the central Y^III ion directly. The crystal of the Na[Y^III(cydta)(H₂O)₂]·5H₂O complex belongs to the triclinic crystal system and space group. The crystal data are as follows: a = 8.405(2) Å, b = 9.970(2) Å, c = 14.763(4) Å, α = 88.538(4)°, β = 76.193(4)°, γ = 88.100(4)°, V = 1200.6(5) Å ³, Z = 2, M = 580.31, D_c = 1.605 g·cm⁻³, μ = 2.519 mm⁻¹ and F(000) = 600. The final R and Rw are 0.0381 and 0.0911 for 4198 (I > 2σ(I)) unique reflections, R and Rw are 0.0530 and 0.1041 for all 6186 reflections, respectively. The Y^IIIN₂O₆ part in the [Y^III(cydta)(H₂O)₂]⁻ complex anion has a pseudo square antiprismatic eight-coordinate structure in which the six coordinated atoms (two N and four O) from the cydta ligand and two water molecules are coordinated to the central YIII ion directly. Original Russian Text Copyright ? 2005 by J. Wang, Y. Wang, Zh. H. Zhang, X. D. Zhang, J. Tong, X. Zh. Liu, X. Y. Liu, Y. Zhang, and Zh. J. Pan __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 5, pp. 928–938, September–October, 2005.     

Crystal structure of the 1:3 thiourea-hexachloroethane inclusion compound at 295 K

The crystal structure of the 1:3 thiourea-hexachloroethane inclusion compound at 295 K has been determined. The parameters of the rhombohedral Bravais cell (space group R3ˉc) are a = 16.097(2) Å, c = 12.450(3) Å, V = 2793.6(8) ų, d _calc = 1.659 g/cm³, d _exp = 1.661±0.005 g/cm³, Z = 6 for C₅H₁₂Cl₆N₆S₃. The disordered guest molecules lie in the channels (parallel to the c axis) of the clathrate framework constructed from thiourea molecules linked by N-H...S hydrogen bonds. The mutual arrangement of the carbon and chlorine atoms is such that they define four orientations of the C-C bond relative to the channel of the host framework with nearly eclipsed conformations of hexachloroethane: one orientation along the triple bond axis (channel axis) and three equiprobable orientations at an angle of 74(2)° to the axis; for the coaxial orientation, there are two different configurations of the guest with slightly different geometries. The relative contributions of each of the five orientations were determined from the site occupancies of the guest atoms: 26.18 (coaxial orientations) and 3×19%. The resulting structure model is compared with the literature data about guest disordering in the structure of an adduct of the same composition determined at 233 K and with other similar structures. Original Russian Text Copyright ? 2007 by S. F. Solodovnikov, G. N. Chekhova, G. V. Romanenko, N. V. Podberezskaya, Z. A. Solodovnikova, D. V. Pinakov, and A. R. Semenov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 348–357, March–April, 2007.     

Comparison of the cold vapor generation using NaBH4 and SnCl2 as reducing agents and atomic emission spectrometry for the determination of Hg with a microstrip microwave induced argon plasma exiting from the wafer

A 2.45 GHz low power microwave microstrip plasma (MSP) exiting the wafer and operated with Ar at atmospheric pressure was used for the optical emission spectrometric determination of Hg with the aid of a miniaturized optical fiber spectrometer with a CCD detector and the cold vapor (CV) generation technique using NaBH₄ and SnCl₂ as reductants. The experimental conditions were optimized with respect to the relative intensity of the Hg I 253.6 nm line and its signal-to-background intensity ratio (SBR). So as to understand the results of the optimization experiments, the excitation temperatures as measured from Ar I lines (T _exc) and the electron number densities (n _e) for the Ar MSP loaded with Hg vapors were determined and found to be in the range from 5500 to 6300 K and from 1.4 to 2.0 × 10¹⁴ cm⁻³, respectively. Under the optimized conditions, the detection limit for Hg of the CV-MSP-OES using SnCl₂ as the reducing agent was found to be much lower (0.11 ng mL⁻¹) than in the case where NaBH₄ was used (9 ng mL⁻¹). The linearity range was found to be up to 1 μg mL⁻¹ while the precision was of the order of 0.7–5%. The procedure with SnCl₂ as reductant was used for the determination of Hg at a concentration of 0.2 μg mL⁻¹ in synthetic water samples containing 1 to 4% (m/v) of NaCl with an accuracy of 3% as well as in a solution of the domestic sludge standard reference material (NIST SRM 2781) with a certified concentration for Hg of 3.64 ± 0.25 μg g⁻¹ for which 3.55 ± 0.41 μg g⁻¹ was found. Correspondence: J. A. C. Broekaert, Institut für Anorganische und Angewandte Chemie, Universit?t Hamburg, 20146 Hamburg, Germany     

New Colorimetric Methods for the Determination of Indapamide and its Formulations

 Two simple and sensitive methods for the determination of indapamide in pure and in dosage forms are developed. These methods are based on the oxidation of indapamide with iron(III) in acidic medium. The liberated iron(II) reacts with 1,10-phenanthroline (Method A) and the ferroin complex is colorimetrically measured at λ_max 509 nm against reagent blank. Method B is based on the reduction of Fe(III) by the drug. Iron(II) forms a colored complex (λ_max 522 nm) with 2,2′-bipyridyl. Optimization of the experimental conditions is described. Beer’s law is obeyed in the concentration range 1.0–12 μg ml⁻¹ and 4.0–18 μ g ml⁻¹ for A and B, respectively. The apparent molar absorptivity and Sandell sensitivity for method A is 3 × 10⁴ L mol⁻¹ cm⁻¹ and 0.0188 μ g cm⁻², while for method B is 2.3 × 10⁴ L mol⁻¹ cm⁻¹ and 0.0159 μg cm⁻². The detection and quantification limits are calculated. The developed methods are applied successfully for the determination of indapamide in pure and in tablet form without interference from common excepients. Received November 10, 2000. Revision April 6, 2001.     

钌(Ⅱ)多吡啶配合物与DNA相互作用的等温滴定量热研究(英)

The interaction of ruthenium(Ⅱ) polypyridyl complex with DNA has been studied by isothermal titration calorimetry (ITC). The results show that complex [Ru(phen)₂PMIP]²⁺ {phen=1,10-phenanthroline, PMIP=2-(4-methylphenyl)imidazo[4,5-f]1,10-phenanthroline} interacts with calf thymus DNA (CT DNA) in terms of a model for a single set of identical sites through intercalation. The results are in agreement with our previous observations from spectroscopic methods and viscosity measurements. In addition, the results further show that the driving force for DNA binding with the complex is mainly driven by the enthalpy changes, and the contribution from the entropy changes to this driving force is negligible.     

Thermal Study of [Pd(2-Phpy)Cl(L)] Complexes (L=pyridines and amines)

The complex [Pd(2-Phpy)(μ-Cl)]₂ reacts with pyridines (L=pyridine, α-picoline and γ-picoline), amines (L=isopropylamine, tert-butylamine) and ammonia to form the corresponding ortho-palladatedderivatives [Pd(2-Phpy)ClL]. The compounds have been characterized by C, H and Nanalyses and spectroscopic methods (IR and ¹H and ¹³C NMR).TG, DTG and DSC studies of the complexes were carried out in dynamic nitrogen atmosphere. From DSC analyses the heats of decomposition were calculated. The kinetics ofthe first step of thermal decomposition were evaluated from TG data by isothermal methods for L=pyridine and isopropylamine. The activation energies obtained are in the range 90–100 kJ mol^-1. The best fitting for data was observed for R2 and A1.5 kinetic models. This revised version was published online in August 2006 with corrections to the Cover Date.     

Lichenysin

The lipopeptide lichenysin (cyclo-[L-Gln1→D-Leu2→L-Leu3→L-Val4→L-Asp5→D-Leu6→L-Ile7-β-OH fatty acid]) produced by Bacillus licheniformis structurally resembles surfactin from Bacillus subtilis. The main difference is the presence of a glutaminyl residue in position 1 of the peptide sequence in place of glutamic acid in surfactin. This local variation causes significant changes in the properties of the molecule compared to surfactin. Lichenysin has a higher surfactant power, the critical micellar concentration (c.m.c.) being strongly reduced from 220 to 22 μM and a much higher hemolytic activity because 100% hemolysis was observed with only 15 μM instead of 200 μM. Lichenysin is also a better chelating agent because its association constants with Ca²⁺ and Mg²⁺ are increased by a factor of 4 and 16, respectively. This effect is assigned to an increase in the accessibility of the carboxyl group to cations owing to a change in the side chain topology induced by the Glu/Gln exchange. Additionally, the propensity of the lipopeptide for extensive hydrophobic interactions, as illustrated by its low c.m.c., contributes to further stabilization of the cation and an increase in the partitioning of lichenysin into the erythrocyte membrane. Our data support the formation of a lichensyin-Ca²⁺ complex in a molar ratio of 2:1 instead of 1:1 with surfactin, suggesting an intermolecular salt bridge between two lichenysin molecules. Therefore, when Ca²⁺ ions are present in the solution, micellization occurs via a dimer assembly, with a possible long-range effect on the spatial arrangement of the micelles or other supramolecular structures. Finally, among all the surfactin peptidic variants so far known, lichenysin is the one for which the three tested activities are the most substantially improved.     

Synthesis and structure of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane

The preparation technique of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane (L), (Cu₂L₂Br₄)_n, is developed. The compound is studied by single crystal and powder X-ray diffraction and static magnetic susceptibility techniques. According to single crystal XRD data, the complex has a layered structure determined by bidentate bridging coordination of L with N(3) and N(3′) atoms to copper(II). The elementary unit of {Cu₂(μ-Br)₂Br₂} polymer has a binuclear structure. The coordination polyhedron is a trigonal pyramid, and the coordination core is CuN₂Br₃. The temperature dependence of effective magnetic moment is studied within an interval of 2–300 K. The nature of the μ_eff(T) dependence indicates that antiferromagnetic exchange interactions dominate in exchange clusters of the complex with an even number of paramagnetic centers. Original Russian Text Copyright ? 2007 by E. V. Lider, A. S. Potapov, E. V. Peresypkina, A. I. Smolentsev, V. N. Ikorskii, A. I. Khlebnikov, and L. G. Lavrenova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No.3, pp.543–547, May–June, 2007.     

Characterization of a graphite powder – ionic liquid paste coated gold electrode, and a method for voltammetric determination of promethazine

A graphite powder – ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate, BMIMPF₆) paste coated gold electrode (graphite – BMIMPF₆/Au) is presented. The area and the thickness of the paste film are controlled through a sticking film with a hole. The electrode shows good stability and high electric conductivity, and K₄Fe(CN)₆ exhibits reversible voltammetric peaks at it. A voltammetric study of promethazine revealed that promethazine exhibits a sensitive anodic peak in pH 6.7 buffer solutions. Under the optimized conditions, the peak current is linearly related to the promethazine concentration in the range of 5.0 × 10⁻⁸–5.0 × 10⁻⁵ M. A 5 μM promethazine solution is measured successively for ten times with the same electrode, the relative standard deviation (RSD) of peak current is 1.7%. The promethazine content in a Chinese medicine (i.e. Complex Reserpine) is determined. The result is in accordance with the declared value, and the recoveries are 96.1–104%.     

A Rapid Spectrophotometric Method to Resolve Ternary Mixtures of Propyphenazone, Caffeine, and Acetaminophen in Tablets

Summary.  A simple and rapid derivative spectrophotometric assay procedure is described for the analysis of caffeine (1), acetaminophen (2), and propyphenazone (3) in tablet formulations. The concentration range of application is 5.0–25.0 μg·cm⁻³ for 2 and 3 and 1.0–5.0 μg·cm⁻³ for 1. The method involves the extraction of the drugs from tablets with 0.1 N H₂SO₄, filtration, appropriate dilution, and measurement of the fourth derivative absorbance values at zero crossing wavelengths of 230.0, 263.2, and 256.6 nm for 1, 2, and 3. As a reference method, a reversed phase HPLC procedure was developed. Commercially available tablets were analyzed; statistical comparison of the results with those obtained from the reference method showed good agreement. The derivative spectrophotometric method has the advantage of being simple, rapid, inexpensive, and easy to perform. Received April 18, 2001. Accepted (revised) June 5, 2001