从LB膜到分子自组装体系——1991年第五届国际LB膜会议追记

LB膜技术是一种分子组装技术,即在力场作用下能将两亲分子加以排列和转移到固体上的一种技术,并可利用这种技术,使各种功能分子或微粒有序地或有控制地排列,成为形成分子器件的一个十分重要的手段。1991年在巴黎召开的第五届国际LB     

无规共聚物熔体结晶的计算机模拟

1956年Flory基于Onsager的思想提出了高分子有序化的"堆积原理",即由于链的非柔顺性导致链构象的空间各向异性,只有有序化排列才能在有限的空间中放入大量的各向异性分子而不必改变其构象,由此发展的平均场格子理论被向列型有序的MonteCarlo模拟所证明。     

一新种型含肉桂酸的Bola型两亲分子在LB膜中的分子排列和分子识别

制备了一种含肉桂酸基团的Bola型两亲分子HDC(4-(10-羟基癸氧基)-10-羟基癸氧基肉桂酸酯). 该分子在空气/水界面形成多分子层Langmuir膜结构. 紫外光照可使膜中HDC分子发生光致二聚，也可使HDC与1,16-十六碳二醇形成的混和膜中HDC分子发生二聚. 光照前后膜中分子倾角分别为58.8°和53.2°. 从实验结果推测了分子排列模型，认为HDC分子在LB膜中有序排列，这来源于分子间π-π相互作用和疏水亚甲基链的Z型构象堆积.     

两亲分子结构对铜网表面生长的Cu2S纳米材料形貌的影响

观察到两亲分子的结构对铜网表面生长的Cu2S-维纳米材料的形貌有较大的影响，含羧酸的强亲水型两亲分子——N-硬脂酰-L-谷氨酸有助于形成纳米线，而把两个羧基全部转化为酯基后．则倾向于形成具有分形结构的纳米带。     

甲基丙烯酸3-磺酸钾丙酯-苯乙烯共聚物与N,N,N-三甲基十六烷基溴化铵相互作用研究

两亲分子由于具有自组装性质,如表面活性剂分子自组装形成胶束,囊泡,天然的磷脂分子自组装形成脂质体,继而参于生物膜的形成,这是大家所熟悉的．高分子两亲分子尤其是两亲性两嵌段高分子具有自组装性质,并形成规整性好的聚集体［１～３］．聚电介质 表面活性剂体系...     

含Schiff碱基囊泡双分子膜的聚集结构与相变

研究表面活性剂分子在水溶液中的聚集行为对模拟生物膜功能和研究分子间相互作用具有重要意义"'．用于形成囊泡双分子层的表面活性剂主要是类似天然磷脂的双烷基链两亲分子,单烷基链两亲分子在引人刚性基团时亦可形成双分子膜k'．含SChiff碱基两亲分子在水溶液中的聚集性质及间、尾链长度对SChiff碱基构象的影响已有报道"'．本文报道了这类分子的另一种重要成膜性质,即改变制备条件,可选择性地得到不同聚集结构和相变温度的双分子膜·实验中所用成膜分子为：CH。（CH。）。;OPh-N-CH－PhO（CH;）n;N"（CH。）。Br－（m-4;n-…     

甲基丙烯酸3—磺酸钾丙酯—苯乙烯共聚物与N,N,N—三甲基十六烷基化铵相 …

两亲分子由于具有自组装性质,如表面活性剂分子自组装形成胶束,囊泡,天然的磷脂分子自组装形成脂质体,继而参于生物膜的形成,这是大家所熟悉的．高分子两亲分子尤其是两亲性两嵌段高分子具有自组装性质,并形成规整性好的聚集体［１～３］．聚电介质表面活性剂体系...     

超两亲分子:可控组装与解组装

与基于共价键的两亲性分子相对照,超两亲分子系指基于非共价键构筑的两亲分子.基于超分子体系的分子工程学的思想,本文总结了超两亲分子的各种类型,包括小分子型、聚合物型和响应性超两亲分子等,以及组装超两亲分子的各种推动力,如主客体相互作用、基于电荷转移作用和不同分子间的协同作用等.研究表明,超两亲分子的研究既可丰富传统的胶体界面化学,又为高级结构的可控组装提供了新的构筑基元,并为制备功能超分子材料开拓了新的途径.     

两亲分子聚集相的扫描隧道显微镜研究

用最近发展起来的局域探测手段－扫描隧道显微镜（ＳＴＭ）及其相伴的方法如局域功函数等，对具有十分丰富局域结构的两亲分子和水的两系统的聚集相作了初步研究，以期为两亲分子研究及局域化学的发展添砖加瓦，结果表明由ＳＴＭ可以真实对反映出各种聚集相的不同形貌，而且加上局域功函数像还可以揭示两亲分子的头尾取向，这对有机分子系统的局域结构的研究有普遍意义。     

酸碱开关两亲分子的研究进展

酸碱开关两亲分子又称为pH敏感两亲分子,结构中常含有酸性或者碱性基团,通过接受或者给予质子使两亲分子的性质发生变化。近十几年,酸碱开关两亲分子由于良好的生物相容性而发展迅猛,在基因载体、药物缓释、油水乳化等很多领域有很好的应用潜力。本文对酸碱开关两亲分子在这些领域中的应用、作用机理进行了分析与讨论,并对酸碱开关两亲分子的发展进行了展望。     

Scanning electrochemical microscopy in combination with piezoelectric quartz crystal impedance analysis for studying the growth and electrochemistry as well as microetching of poly(o-phenylenediamine) thin films

The combination of scanning electrochemical microscopy (SECM) with piezoelectric quartz crystal impedance (PQCI) analysis was proposed as a novel multiparameter method for investigating the cyclic voltammetric growth of poly(o-phenylenediamine) (PoPD) thin films at Au electrodes in aqueous solutions of various pH values and the potentiostatic microetching (localized degradation) of these films in 0.10 mol/L aqueous H2SO4 for comparative examinations on polymer porosity and stability. Two potential-sweep ranges, -0.4 to 0.9 (I) and 0 to 0.9 (II) V versus SCE, and four solutions, acidic (A, 0.20 mol/L H2SO4 + 0.10 mol/L Na2SO4; B, 0.10 mol/L H2SO4 + 0.20 mol/L Na2SO4), neutral (C, 0.10 mol/L PBS + 0.20 mol/L Na2SO4, pH 7.2), and alkaline (D, 0.20 mol/L NaOH + 0.20 mol/L Na2SO4) aqueous solutions, were selected for PoPD growth. The pH increase for the polymerization solution increased the molar percentage of polyaniline-like chains in PoPD, as quantified from the current peaks at approximately 0.6 V versus a saturated calomel electrode (SCE) for the oxidation of -NH2 groups in as-prepared PoPD (grown from solutions C and D) during their redox switching in 0.10 mol/L aqueous H2SO4 for the first time. The unusual PQCI responses observed at negative potentials (potential range I) in the first several potential cycles during the cyclic voltammetric growth of PoPD in acidic and neutral solutions have been reasonably explained as being due to the precipitation/dissolution of the poorly soluble phenazinehydrine charge-transfer complexes developed during redox switching of oligomers for the first time, which brought about much less compact PoPD films and their higher degradability than those grown in the same solution but over potential range II. SECM, scanning electron microscopy (SEM), and piezoelectric quartz crystal (PQC) frequency were used to estimate the sizes of etched microscale spots. In addition, the x-, y-, or z-axis movement of a Pt microelectrode of 25-mum diameter near the PQC electrode was found to influence negligibly the PQCI responses in 1.0 mol/L aqueous Na2SO4 containing K4Fe(CN)6 up to 0.10 mol/L, and a new protocol of dynamically electrodepositing silver microwires via the chemical-lens method was proposed for examining the local mass-sensitivity distribution on the PQC surface.     

NMR studies on selectivity of beta-cyclodextrin to fluorinated/hydrogenated surfactant mixtures

The interactions between beta-cyclodextrin (beta-CD) and the equimolar/nonequimolar mixtures of sodium perfluorooctanoate (C(7)F(15)COONa, SPFO) and sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na, C(n)SO(4), n = 8, 10, 12) were investigated by 1H and 19F NMR. It showed that beta-CD preferentially included the fluorinated surfactant when exposed to mixtures of hydrogenated (C(n)SO(4)) and fluorinated (SPFO) surfactants, notwithstanding whether the hydrogenated surfactant C(n)SO(4) was more or less hydrophobic than the SPFO. Such preferential inclusion of the fluorinated surfactant continued to a certain concentration of beta-CD at which time the C(n)SO(4) was then observed to be included. The longer the hydrocarbon chain of C(n)SO(4) the lower the concentration of beta-CD at which the hydrogenated surfactants began to show inclusion. The inclusion process can be qualitatively divided into three stages: first, formation of 1:1 beta-CD/SPFO complexes; second, formation of 1:1 beta-CD/C(n)SO(4) complexes; and finally, formation of 2:1 beta-CD/SPFO complexes upon further increase of beta-CD concentration. In the concentration range studied, during the last stage of inclusion both 2:1 beta-CD/C(12)SO(4) and 2:1 beta-CD/SPFO complexes appear to be simultaneously formed in the system of beta-CD/SPFO/C(12)SO(4) but not in either the systems of beta-CD/SPFO/C(8)SO(4) or beta-CD/SPFO/C(10)SO(4). The selective inclusion of the shorter fluorocarbon chain surfactant might be attributed to the greater rigidity and size of the fluorocarbon chains, compared to those of the hydrocarbon chains, which provide for a tighter fit and better interaction between the host and guest. This latter effect appears to dominate the increase in hydrophobic character as the carbon chain length increases in the hydrogenated series.     

Structural organization of cetyltrimethylammonium sulfate in aqueous solution: The effect of Na2SO4

We used dynamic light scattering (DLS), steady-state fluorescence, time resolved fluorescence quenching (TRFQ), tensiometry, conductimetry, and isothermal titration calorimetry (ITC) to investigate the self-assembly of the cationic surfactant cetyltrimethylammonium sulfate (CTAS) in aqueous solution, which has SO(2-)4 as divalent counterion. We obtained the critical micelle concentration (cmc), aggregation number (N(agg)), area per monomer (a0), hydrodynamic radius (R(H)), and degree of counterion dissociation (alpha) of CTAS micelles in the absence and presence of up to 1 M Na2SO4 and at temperatures of 25 and 40 degrees C. Between 0.01 and 0.3 M salt the hydrodynamic radius of CTAS micelle R(H) approximately 16 A is roughly independent on Na2SO4 concentration; below and above this concentration range R(H) increases steeply with the salt concentration, indicating micelle structure transition, from spherical to rod-like structures. R(H) increases only slightly as temperature increases from 25 to 40 degrees C, and the cmc decreases initially very steeply with Na2SO4 concentration up to about 10 mM, and thereafter it is constant. The area per surfactant at the water/air interface, a0, initially increases steeply with Na2SO4 concentration, and then decreases above ca. 10 mM. Conductimetry gives alpha = 0.18 for the degree of counterion dissociation, and N(agg) obtained by fluorescence methods increases with surfactant concentration but it is roughly independent of up to 80 mM salt. The ITC data yield cmc of 0.22 mM in water, and the calculated enthalpy change of micelle formation, Delta H(mic) = 3.8 kJ mol(-1), Gibbs free energy of micellization of surfactant molecules, Delta G(mic) = -38.0 kJ mol(-1) and entropy TDelta S(mic) = 41.7 kJ mol(-1) indicate that the formation of CTAS micelles is entropy-driven.     

Aggregation behavior of a series of anionic sulfonate gemini surfactants and their corresponding monomeric surfactant

A series of anionic sulfonate gemini surfactants with the general structure of [(Cn H2n+1)(C3H6SO(-)3) NCsN(C3H6SO(-)3)(CnH2n+1)].2Na+ have been synthesized. While the spacer group Cs represents p-xylyl or (CH2)3, the surfactants are abbreviated as CnCpxCn(SO3)2 (n=8,10,12) or C12C3C12(SO3)2(n=12), respectively. A corresponding monomeric surfactant C12H25N(CH3)(C3H6SO(-)3).Na+(C12NSO3) has also been prepared. The aggregation behavior of these surfactants has been studied at pH 9.2 and ionic strength of 30 mM. The gemini surfactants exhibit stronger aggregation tendencies and much less endothermic enthalpy changes of micellization (DeltaH mic) compared with the monomeric surfactant. The critical micelle concentrations (CMC) of the gemini surfactants decrease with the increase of the hydrophobic chain length from C8CpxC8(SO3)2 to C10CpxC10(SO3)2, but the CMC values of C10CpxC10(SO3)2 and C12CpxC12(SO3)2 are very close. The DeltaH mic values vary from endothermic for C8CpxC8(SO3)2 to almost zero for C12CpxC12(SO3)2. Besides, vesicles are observed above the CMC for all these surfactants. The water-mediated intermolecular hydrogen bonding between the tertiary nitrogen groups may assist C12NSO3 and C12C3C12(SO3)2 in their vesicle formation, while the pi-pi interaction between aromatic rings should be another additional driving force for the vesicle formation of CnCpxCn(SO3)2. Meanwhile, the hydrogen bonding, pi-pi interaction, and strong hydrophobic interaction provide the possibility of a multilayer formation for C12CpxC12(SO3)2 and C12C3C12(SO3)2 at the air/water interface, which is a possible reason for the extremely small minimum area occupied per surfactant molecule at the air/water interface for these two gemini surfactants.     

Hydrotrope-induced inversion of salt effects on the cloud point of an extended surfactant

We report on the effects of electrolytes spanning a range of anions (NaOc, NaSCN, NaNO(3), NaBr, NaCl, NaBu, NaOAc, Na(2)SO(4), Na(2)HPO(4), and Na(2)CO(3)) and cations (LiCl, NaCl, KCl, CsCl, and choline chloride) on the aqueous solubility of an extended surfactant. The surfactant is anionic with a long hydrophobic tail as well as a significant fraction of propylene oxide groups and ethylene oxide groups (C(12-14)-PO(16)-EO(2)-SO(4)Na, X-AES). In the absence of electrolytes, X-AES exhibits a cloud-point temperature that decreases with increasing surfactant concentration. After the addition of salts to the surfactant solutions, various shifts in the solubility curves are observed. These shifts follow precisely the same Hofmeister series that is found for salting-in and salting-out effects in protein solutions. In the presence of different concentrations of sodium xylene sulfonate (SXS), the solubility of the surfactant increases. In this context, SXS can be considered to be a salting-in salt. However, when the electrolytes are added to an aqueous solution of X-AES and SXS the Hofmeister series reverses for divalent anions such as Na(2)SO(4), Na(2)HPO(4), and Na(2)CO(3). Studies on the phase behavior and micelle structures using polarization microscopy, freeze-etch TEM, and NMR measurements indicate a dramatic change in the coexisting phases on the addition of SXS.     

混合阴、阳离子表面活性剂溶液中的分子相互作用和相分离

混合阴、阳离子表面活性剂的表面活性比单一组份的表面活性高得多[1]．多年来，该体系的界面化学性质得到了广泛的研究［1，2］．但是，一旦该体系在水溶液中的浓度超过其临界胶团浓度（cmc）后，就将沉淀[3]或分层［2，4］，从而失去其表面活性．后来发现卜，司，在某些情况下，阴、阳离子混合表面活性剂的沉淀现象有所改善；但一直不易找到在相当大浓度范围内仍不分层的阴、阳离子表面活性剂混合体系．本文较为简明、系统地讨论了阴、阳离子表面活性剂的相互作用与沉淀或分相的关系．这对于该体系的深入研究以及实际应用，具有积极的意义…     

{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20]36-: a molecular quantum spin icosidodecahedron

Self-assembly of aqueous solutions of molybdate and vanadate under reducing, mildly acidic conditions results in a polyoxomolybdate-based {Mo72V30} cluster compound Na8K16(VO)(H2O)5[K10 subset{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20].150H2O, 1, a quantum spin-based Keplerate structure.     

Dynamic capillary coatings with zwitterionic surfactants for capillary isoelectric focusing

The use of surfactants as additives was demonstrated for the first time in capillary isoelectric focusing (CIEF) to dynamically modify the surfaces of bare fused silica capillaries. These surfactants were zwitterionic sulfobetaines: dodecyldimethyl (3-sulfopropyl) ammonium hydroxide (C12N3SO3), hexadecyldimethyl (3-sulfopropyl) ammonium hydroxide (C16N3SO3) and coco (amidopropyl)hydroxyldimethylsulfobetaine (Rewoteric AM CAS U). They were added directly to the protein-ampholyte mixture, and remained in the capillary during isoelectric focusing and mobilization. The C16N3SO3 and CAS U coatings were shown effective in CEF. Separation of seven IEF protein standards was obtained, with significantly improved resolution compared to that from an uncoated silica capillary. The effect of these surfactants on the electroosmotic flow (EOF) in CIEF was determined. CAS U was effective in suppressing the EOF at neutral and alkaline pH conditions, C16N3SO3 was effective in suppressing EOF at acidic and neutral pH conditions. C12N3SO3 however had little effect on the EOF. The pH gradients formed inside these surfactant coated capillaries were recta-linear at pH 6 to 9 (R2 approximately equal to 0.99). Reproducibility of migration time and peak area was determined. For all three coatings, the migration time standard deviations were less than 1.6 min, and the relative standard deviations of area were below 10%. The protein recovery in the CAS U-modified capillary was quantitative or near-quantitative for five of the seven proteins studied.     

Raman spectroscopic study of crystallization from solutions containing MgSO4 and Na2SO4: Raman spectra of double salts

Mg(2+), Na(+), and SO(4)(2-) are common ions in natural systems, and they are usually found in water bodies. Precipitation processes have great importance in environmental studies because they may be part of complex natural cycles; natural formation of atmospheric particulate matter is just one case. In this work, Na(2)Mg(SO(4))(2)·5H(2)O (konyaite), Na(6)Mg(SO(4))(4) (vanthoffite), and Na(12)Mg(7)(SO(4))(13)·15H(2)O (loeweite) were synthesized and their Raman spectra reported. By slow vaporization (at 20 °C and relative humidity of 60-70%), crystallization experiments were performed within small droplets (diameter ≤ 1-2 mm) of solutions containing MgSO(4) and Na(2)SO(4), and crystal formations were studied by Raman spectroscopy. Crystallization of Na(2)Mg(SO(4))(2)·4H(2)O (bloedite) was observed, and the formation of salt mixtures was confirmed by Raman spectra. Bloedite, konyaite, and loeweite, as well as Na(2)SO(4) and MgSO(4)·6H(2)O, were the components found to occur in different proportions. No crystallization of Na(6)Mg(SO(4))(4) (vanthoffite) was observed under the crystallization condition used in this study.     

反离子对离子液体氯化1-(2-羟乙基)-3-十二烷基咪唑在水溶液中自组装的影响

用表面张力法和荧光探针技术分别测定了阳离子型离子液体表面活性剂氯化1-(2-羟乙基)-3-十二烷基咪唑([C2OHC12im]Cl)在无机盐(NaX,X=Cl-,Br-,I-和Na2SO4)水溶液中的自组装参数。 结果表明,反离子通过结合[C2OHC12im]+并中和其表面电荷,使[C2OHC12im]+的临界胶束浓度(CMC)和胶束平均聚集数(Nm)等自组装参数明显改变;改变幅度按照Cl-＜Br-＜I-＜SO2-4次序递增;但是反离子(Cl-、Br-和SO2-4)种类对临界胶束平均聚集数(Nm,c)和胶束微极性([I1/I3]m)的影响不甚明显;随着Br-浓度增加,lg CMC线性减小,而Nm则以幂函数形式递增。