New Synthesis of N,N‐Disubstituted (4‐Aminophenyl)diazenyl‐1,3,4‐thiadiazole,and Mesogenic Study and Molecular Modeling of Its H‐Bonded Complexes with a Series of m‐Alkoxybenzoic Acid Derivatives

A new N,N‐disubstituted (4‐aminophenyl)diazenyl‐1,3,4‐thiadiazole, an azo dye, was synthesized from the reaction of the 1‐decanoyl‐4‐phenylpiperazine in acetone, in situ, with the diazonium salt prepared from 1,3,4‐thiadiazol‐2‐amine and NaNO₂ in H₃PO₄. The azo dye was found to form complexes with a series of m‐alkoxybenzoic acid by intermolecular H‐bonding. The mesogenic behavior of the complexes were investigated by polarizing optical microscopy and differential scanning calorimetry. A study of the representing complex by powder X‐ray diffraction and molecular modeling was further undertaken to locate the H‐bonding position.     

Synthesis of novel three‐arm star azo side‐chain liquid crystalline polymer via ATRP and photoinduced surface relief gratings

A three‐arm star azo side‐chain liquid crystalline (LC) homopolymer, poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO), was synthesized by atom transfer radical polymerization (ATRP) method. The polymerization of 6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate proceeded in a controlled/“living” way. A series of three‐arm star LC block copolymers (PMMAZO‐b‐PMMA) were also synthesized. The polymers were characterized by ¹H NMR, gel permeation chromatograph, and UV–vis spectra, respectively. The both polymers of PMMAZO and copolymers of PMMAZO‐b‐PMMA exhibited a smetic phase and a nematic phase. As concern to the PMMAZO, the glass‐transition temperature (T_g) and phase‐transition temperature from the smetic to nematic phase and from the nematic to isotropic phase increased with the increase of molecular weight (M_n(GPC)) of PMMAZO. The phase transition temperature of the block copolymers, PMMAZO‐b‐PMMA, with the same PMMA block was similar to that of PMMAZO. However, the T_g of the PMMAZO‐b‐PMMA decreased at low azo content and then increased with the increasing M_n(GPC) when azo content was above 61.3%. With illumination of linearly polarized Kr⁺ laser beam at modest intensities (35 mW/cm²), significant surface relief gratings formed on PMMAZO films with different molecular weights were observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 777–789, 2008     

A novel azocompound, 2‐(4‐phenylazoaniline)‐4‐phenylphenol: Spectroscopic and quantum‐chemical approach

A novel azocompound with two nonequivalents azo groups, 2‐(4‐phenylazoaniline)‐4‐phenylphenol, was synthesized and characterized by spectroscopic and computational analysis. An intramolecular hydrogen bonding (HB), ? O₁? H₁ ··· N₁? , involving the ? N₁?N₂? group and the proton in a neighbor hydroxyl moiety, was identified. It was found responsible for a characteristic π‐conjugated H₁? O₁? C₁₈?C₁₃? N₂?N₁? six‐membered cyclic fragment. It is worth noting that this azo group is involved in an azo‐hydrazo equilibrium, being the azo form the most stable one. This resonance‐assisted HB was characterized using the OH‐related infrared bands and the corresponding signals in ¹H NMR. In addition, conformational studies and geometrical and electronic parameter calculations were performed using the density functional theory, at B3LYP/6‐311++G** level. Bond and ring critical points were identified using the atoms in molecules theory, which allowed confirming the intramolecular HB. The second azo‐group cannot be involved in HB, but it also presents two stereoisomerics forms corresponding to cis (Z) and trans (E) configurations, with the later being the one with the lowest energy. © 2013 Wiley Periodicals, Inc.     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Synthesis and study of N,N-disubstituted 4-aminophenylazobenzaldehydes

A series of ^N , ^N -disubstituted 4-aminophenylazobenzaldehydes (azo dyes) were synthesized by the reaction of phenylpiperazine derivatives with 4-formylbenzenediazonium tetrafluoroborate. The salt was easily prepared by reacting poly(aminobenzaldehyde) with sodium nitrite in the presence of tetrafluoroboric acid. A representative sample was studied by crystallography, and the charge distribution of the molecule was calculated with the aim of understanding the form of molecular stacking on the basis of crystal data. The mesogenic behaviour of the azo dyes was also studied.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Studies on the modification of poly(ω‐bromoalkyl‐1‐glycidylether)s with 4′‐methoxybiphenyl‐4‐oxy mesogenic groups

A series of poly[ω‐(4′‐methoxy‐biphenyl‐4‐oxy)alkyl‐1‐glycidylether]s were synthesized by chemically modifying the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐hydroxy‐4′‐methoxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yields and almost quantitative degrees of modification. They were all insoluble in THF and other common solvents. Characterization by ¹³C NMR confirmed that all the polymers had the expected structure. The liquid crystalline behavior of the polymers was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction studies. Polymers that had alkyl spacers with n = 2 and 4 were smectic C, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C again. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5998–6006, 2005     

Synthesis of 1,3‐Selenazol‐2(3H)‐imines

The reaction of N,N′‐diarylselenoureas 16 with phenacyl bromide in EtOH under reflux, followed by treatment with NH₃, gave N,3‐diaryl‐4‐phenyl‐1,3‐selenazol‐2(3H)‐imines 13 in high yields (Scheme 2). A reaction mechanism via formation of the corresponding Se‐(benzoylmethyl)isoselenoureas 18 and subsequent cyclocondensation is proposed (Scheme 3). The N,N′‐diarylselenoureas 16 were conveniently prepared by the reaction of aryl isoselenocyanates 15 with 4‐substituted anilines. The structures of 13a and 13c were established by X‐ray crystallography.     

Synthesis and study of N,N‐disubstituted 4‐[(4‐aminophenyl)diazenyl]benzylidene‐4′‐alkylanilines

A series of N,N‐disubstituted‐4‐[(4‐aminophenyl)diazenyl]benzylidene‐4′‐alkylanilines (azo dyes) were synthesized from the reaction of the corresponding benzaldehyde with alkylanilines. These azo dyes exhibit nematic and SmC phases on heating. Their order parameter, photo‐stability and miscibility were studied by investigation of a representative sample.     

Two regioisomers of condensed thioheterocyclic triazine synthesized from 6‐phenyl‐3‐thioxo‐2,3,4,5‐tetrahydro‐1,2,4‐triazin‐5‐one

In the crystal structure of 6‐phenyl‐3‐thioxo‐2,3,4,5‐tetrahydro‐1,2,4‐triazin‐5‐one, C₉H₇N₃OS, (I), the 1,2,4‐triazine moieties are connected by face‐to‐face contacts through two kinds of double hydrogen bonds (N—H...O and N—H...S), which form planar ribbons along the a axis. The ribbons are crosslinked through C—H...π interactions between the phenyl rings. The molecular structures of two regioisomeric compounds, namely 6‐phenyl‐2,3‐dihydro‐7H‐1,3‐thiazolo[3,2‐b][1,2,4]triazin‐7‐one, C₁₁H₉N₃OS, (II), and 3‐phenyl‐6,7‐dihydro‐4H‐1,3‐thiazolo[2,3‐c][1,2,4]triazin‐4‐one, C₁₁H₉N₃OS, (III), which were prepared by the condensation reaction of (I) with 1,2‐dibromoethane, have been characterized by X‐ray crystallography and spectroscopic studies. The crystal structures of (II) and (III) both show two crystallographically independent molecules. While the two compounds are isomers, the unit‐cell parameters and crystal packing are quite different and (II) has a chiral crystal structure.     

4‐(9,10‐Dihydroacridin‐9‐ylidene)thiosemicarbazide and its five‐membered thiazole and six‐membered thiazine derivatives

Two methyl derivatives, five‐membered methyl 2‐{2‐[2‐(9,10‐dihydroacridin‐9‐ylidene)‐1‐methylhydrazinyl]‐4‐oxo‐4,5‐dihydro‐1,3‐thiazol‐5‐ylidene}acetate, C₂₀H₁₆N₄O₃S, (I), and six‐membered 2‐[2‐(9,10‐dihydroacridin‐9‐ylidene)‐1‐methylhydrazinyl]‐4H‐1,3‐thiazin‐4‐one, C₁₈H₁₄N₄OS, (II), were prepared by the reaction of the N‐methyl derivative of 4‐(9,10‐dihydroacridin‐9‐ylidene)thiosemicarbazide, C₁₄H₁₂N₄S, (III), with dimethyl acetylenedicarboxylate and methyl propiolate, respectively. The crystal structures of (I), (II) and (III) are molecular and can be considered in two parts: (i) the nearly planar acridine moiety and (ii) the singular heterocyclic ring portion [thiazolidine for (I) and thiazine for (II)] including the linking amine and imine N atoms and the methyl C atom, or the full side chain in the case of (III). The structures of (I) and (II) are stabilized by N—H...O hydrogen bonds and different π–π interactions between acridine moieties and thiazolidine and thiazine rings, respectively.     

Derivatives from Isoselenocyanates: Synthesis of 2‐Phenyl‐6H‐[5,1,3]benzoselenadiazocine

The reaction of N‐phenylbenzimidoyl isoselenocyanates 8 with primary and secondary amines in acetone at room temperature, followed by treatment with a base, led to 6H‐[5,1,3]benzoselenadiazocine derivatives of type 10 (Scheme 3). An analogous cyclization was observed when 8a and 8b were reacted with the Na salt of diethyl malonate in EtOH at room temperature, which yielded the eight‐membered selenaheterocycles 11 (Scheme 5). The molecular structures of some of the products, as well as that of a sulfur analogue, have been established by X‐ray crystallography (Figs. 1–4). The isoselenocyanates 8 have been prepared from N‐(2‐methylphenyl)benzamides 5 in a three‐step procedure via the corresponding imidoyl chlorides 6 , side‐chain chlorination to give 7 , and treatment with KSeCN (Scheme 2).     

(Nitro‐κN)[2‐(phenyldiazenyl‐κN2)pyridine‐κN](2,2′:6′,2′′‐terpyridine‐κ3N)ruthenium(II) tetrafluoroborate

The Ru—N bond distances in the title complex, [Ru(NO₂)(C₁₁H₉N₃)(C₁₅H₁₁N₃)]BF₄ or [Ru(NO₂)(tpy)(azpy)]BF₄, [tpy is 2,2′:6′,2′′‐ter­pyridine and azpy is 2‐(phenyl­azo)­pyridine], are Ru—N_py 2.063 (4), Ru—N_azo 2.036 (4), Ru—N_nitro 2.066 (3) Å, and Ru—N_tpy 2.082 (4), 1.982 (3) and 2.074 (4) Å. The azo N atom is trans to the nitro group. The azo N=N bond length is 1.265 (5) Å, which is the shortest found in such complexes to date. This indicates a multiple bond between Ru and the N atom of the nitro group, and π‐­backbonding [dπ(Ru) π*(azo)] is decreased.     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

One‐pot three‐component synthesis of novel 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid derivatives

A simple and easy synthesis of 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid ( 3 ) has been successfully developed through a one‐pot three‐component condensation reaction of (2‐amino‐phenyl)‐oxo‐acetic acid sodium salt ( 1 ) obtained from the hydrolysis of isatin with ammonium acetate and 3‐nitrobenzaldehyde. Some novel quinazoline‐ester derivatives 4‐7 were then obtained by the reaction between the new compound 3 and various alcohols. Then, quinazoline‐amide derivatives 10‐14 were synthesized from the reaction of various amines and 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carbonyl chloride ( 8 ), obtained by the reaction of compound 3 with SOCl₂. Finally, some novel quinazoline‐azo derivatives 17‐19 were synthesized by the coupling reaction between β‐dicarbonyl compounds and the novel amino‐quinazoline derivative compound 15 , obtained by reduction of nitro‐quinazoline derivative compound 11 . Thus, a new series of quinazoline‐4‐carboxylic acid, ester, amide, and azo derivatives was synthesized and fully characterized by ¹H NMR, ¹³C NMR, IR, and mass spectrometry analysis.     

基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Synthesis of 1,2,4‐Triazolo[4,3‐a]pyrimidine Derivatives by Cyclocondensation of a 2‐Thioxopyrimidin‐4(3H)‐one with Hydrazonoyl Halides

The reaction of 1,2‐dihydro‐6‐(phenylamino)‐2‐thioxopyrimidin‐4(3H)one ( 16 ) with N‐arylhydrazonoyl halides 15 in CHCl₃ in the presence of Et₃N under reflux afforded the corresponding 1,2,4‐triazolo[4,3‐a]pyrimidin‐5‐ones of type 20 in good yields (Scheme 3). The structure of one of the derivatives, 20d , has been established by X‐ray crystallography. Conceivable reaction mechanisms are discussed in Schemes 3 and 4. The products of type 20 easily undergo reactions with electrophiles such as benzenediazonium chloride, chloroacetyl chloride, and NaNO₂ in AcOH to give 6‐phenylazo, 6‐chloroacetyl, and 6‐nitroso derivatives 21, 23 , and 25 , respectively (Scheme 5).     

Synthesis of 4‐Aryl‐4,6‐dihydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐diones from Biginelli Compounds

Biginelli compounds 1 were first brominated at Me? C(6) with 2,4,4,6‐tetrabromocyclohex‐2,5‐dien‐1‐one to give Br₂CH? C(6) derivatives 2 . The hydrolysis of the 6‐(dibromomethyl) group of 2c to give the 6‐formyl derivative 3c in the presence of an expensive Ag salt followed by reaction with N₂H₄?H₂O yielded tetrahydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐dione ( 4c ; Scheme 1). However, treatment of the 6‐(dibromomethyl) derivatives 2 directly with N₂H₄?H₂O led to the fused heterocycles 4 in better overall yield (Schemes 1 and 2; Table).     

4‐(3,5‐Dimethyl‐1H‐pyrazol‐4‐ylmethyl)‐3,5‐dimethyl‐1H‐pyrazol‐2‐ium dihydrogen phosphate: a combined X‐ray and DFT study

The molecular structure of the title salt, C₁₁H₁₇N₄⁺·H₂PO₄⁻, has been determined from single‐crystal X‐ray analysis and compared with the structure calculated by density functional theory (DFT) at the BLYP level. The crystal packing in the title compound is stabilized primarily by intermolecular N—H...O, O—H...N and O—H...O hydrogen bonds and π–π stacking interactions, and thus a three‐dimensional supramolecular honeycomb network consisting of R₄²(10), R₄⁴(14) and R₄⁴(24) ring motifs is established. The HOMO–LUMO energy gap (1.338 eV; HOMO is the highest occupied molecular orbital and LUMO is the lowest unoccupied molecular orbital) indicates a high chemical reactivity for the title compound.     

3,6‐Di­chloro‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine and 3,6‐bis­(pyrazol‐1‐yl)‐4‐[2‐(4‐thia­mor­pho­lino)­ethanesulfanyl]­pyridazine

The trans–trans conformations adopted by the derivatized bis­(bidentate) chelating N₄‐donor ligand 3,6‐bis­(pyrazol‐1‐yl)‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine, C₁₆H₁₉N₇S₂, and an intermediate in its formation, 3,6‐di­chloro‐4‐[2‐(4‐thia­morpholino)­ethanesulfanyl]­pyridazine, C₁₀H₁₃Cl₂N₃S₂, con­trast with the cis–cis conformation found previously for 3,6‐bis­(thio­phen‐2‐yl)­pyridazine [Ackers, Blake, Hill & Hubberstey (2002). Acta Cryst. C 58 , o640–o641], which places all four heteroatoms on the same side of the mol­ecule.