Estimation of Olefin Dimerisation Products by GC/GC–MS and IR Techniques

A GC and IR based protocol was developed for monitoring the isobutene dimerisation process wherein the complete characterisation of the products was carried out by GC coupled with mass spectrometry. In the dimerisation process, LPG from FCC process comprising a mixture of saturated and unsaturated C4 hydrocarbons is subjected to a dimerisation process using a catalyst to produce C8 hydrocarbons. The reaction is carried out keeping in view the demand for high-octane blending components in gasoline. The isooctene generated in the process (mainly from the dimerisation of isobutene) is converted into isooctane having the RON and MON value 100. The monitoring process requires the use of two different column chemistries, viz., a 100 m CPSIL PONA CB non-polar column for C8 and its isomers and an Alumina PLOT column for C4 hydrocarbons. A 100 m non-polar column does not separate the C4 mixture since the column is meant for gasoline range products containing C5 and above hydrocarbons. Therefore, a need was felt for an improvised method which can handle both the analyses simultaneously. A cryogenic oven program starting from 0 °C was developed for separating the isomers of C4 hydrocarbons and C8 hydrocarbons on a single column during the single run by Detailed Hydrocarbon Analyzer. The data obtained using the cryo programme was validated with data obtained using Alumina PLOT column on C4 mixture since the Alumina PLOT column is the widely accepted column chemistry for separating the C4 hydrocarbons. An IR method for the estimation of the total olefin content was developed using 2,2,4-trimethyl pentene-1 as the reference standard. The total olefins generated during the process were identified by GC–MS, quantified by DHA-FID and validated by infrared spectroscopy. A good correlation was found between GC and IR spectral results (correlation coefficient R ²  = 0.99).     

Detection and Confirmation of Ginsenosides in Horse Urine by GC–MS and LC–MS

Ginseng has been used by the Chinese as a traditional herbal medicine for thousands of years. In view of the growing popularity in the use of ginseng preparations as natural remedies and food supplements worldwide, there is an increasing concern for their abuse in both human and animal sports. Ginsenosides are considered the major constituents of ginseng responsible for its pharmacological properties. In this study, a method was developed for the detection and confirmation of a number of ginsenosides in horse urine. The intact ginsenosides were detected and confirmed at 5–100 ng mL^?1 by LC–MS², and two deglycosylation metabolites, namely protopanaxadiol and protopanaxatriol, could both be detected and confirmed at 2 ng mL^?1 by GC–MS² after trimethylsilylation. The above GC–MS and LC–MS methods were then applied to study the in vitro metabolism of ginsenosides Rg1 and Rb1 and the in vivo urinary metabolites after oral administration of Rg1 to horses. Results obtained reveal the very first evidence for the existence of the metabolites, Rg1 and protopanaxatriol, as glucuronides in urine.     

Investigation of Euphrasia rostkoviana Hayne Using GC–MS and LC–MS

Gas and liquid chromatography coupled with mass spectrometry was applied to solve difficulties and reinvestigate the serious matrix problems affecting analysis of the active compounds in Euphrasia rostkoviana Hayne. The main groups of compounds were obtained by extracting the herb stepwise with n-hexane, chloroform, ethyl acetate and methanol. Polyamide column chromatography facilitated further separation. Phenolic/flavonoid- and terpenoid-type molecules were studied by GC–MS, HPLC and LC–MS–MS. The β-sitosterol content of the herb was determined by gas chromatography with flame ionisation detection (GC-FID). Caffeic acid, chlorogenic acid, coumaric acid and flavonoid glycosides of apigenin, luteolin, rhamnetine (hexoside), kaempferol (both hexoside and rutinoside) and quercetin (rutinoside) were identified in the fractions of the methanolic extract.     

HS–SPME–GC–MS for the Quantitation and Chiral Characterization of Camphor and Menthol in Creams

A GC–MS method is proposed for the analysis of camphor and menthol in “over-the-counter” (OTC) products. Sample preparation was achieved by head-space solid phase microextraction using a polydimethylsiloxane fibre. GC analysis was performed using a Phenomenex ZB-5 column and a temperature program was adopted. The method was validated by studying linearity (range 0.1–15.0% w/w), accuracy, reproducibility and sensitivity. Applications were directed to the determination of the active ingredients in four different OTC-products; the mean recoveries were in the ranges 91.30–99.74% and 94.34–102.89% for camphor and menthol, respectively and the LOD was in the order of 0.005% (w/w). Other important terpenoids (α- and β-pinene, 1,8-cineole, menthone, isomenthone, α-terpineole, t-cinnamaldehyde, eugenole) were identified by mass spectra and Kovats retention indices and quantified by peak area normalization to 100%. Further information for a comprehensive characterization of the OTC-products was achieved by the GC chiral analysis on a Cyclosil B capillary column.     

Determination of Pentachloronitrobenzene and Its Metabolites in Ginseng by Matrix Solid-Phase Dispersion and GC–MS–MS

A rapid method was developed for the determination of pentachloronitrobenzene (PCNB) and its metabolites pentachloroaniline, pentachlorothioanisole residues in ginseng. Extraction and clean-up were carried out in a single step and analysis was accomplished by gas chromatography–mass spectrometry with multiple reaction monitoring. The main parameters affecting extraction yield and selectivity, such as type and amount of dispersant material, clean-up co-sorbent and extraction solvent were evaluated. The best results were obtained using 1 g ginseng, 2 g florisil as dispersant sorbent, 0.5 g neutral alumina as clean-up co-sorbent, and subsequent extraction with 10 mL acetone–n-hexane (5:5, v/v) with assisted sonication and repeated with another 5 mL of the same solvent mixture. The method was validated by analysis of ginseng samples fortified at different concentration levels (0.01–0.10 mg kg^?1). Average recoveries (n = 5) ranged from 85 to 95% with relative standard deviation between 2.5 and 11.2%. Spiked blank samples were used as standards to counteract the matrix effect observed in the chromatographic determination. The detection limits ranged from 0.2 to 0.9 µg kg^?1 in ginseng. The method was applied to the analysis of PCNB and its metabolite residues in commercial ginseng samples.     

GC–MS analysis and anti–microbial activity of Prunella vulgaris L. extracts

In this study, the chemical composition of the methanol, hexane and ethyl acetate extracts of Prunella vulgaris L. were investigated by gas chromatography–mass spectrometry (GC–MS) method. 2-hydroxy-5-methylbenzaldehyde (15.70%), linolenic acid (45.50%) and icosane (16.24%) were found to be the most abundant in methanol, hexane and ethyl acetate extracts, respectively. Following the determination of chemical components of the Prunella vulgaris L. extracts, their anti–microbial activities against certain human pathogenic bacteria were tested and minimal inhibitory concentrations (MIC) were determined. While some extracts of Prunella vulgaris L. show anti–microbial activity well above the standards (penicillin and tetracycline), it was determined that in general all the extracts showed good anti–microbial activity against these pathogenic bacteria.     

Comparison between GC–MS and GC–ICPMS using isotope dilution for the simultaneous monitoring of inorganic and methyl mercury,butyl and phenyl tin compounds in biological tissues

The aim of this work is to compare simultaneous isotope dilution analysis of organotin and organomercury compounds by gas chromatography–mass spectrometry (GC–MS) and gas chromatography–inductively coupled plasma mass spectrometry (GC–ICP/MS) on certified bivalve samples. These samples were extracted by microwave with tetramethylammonium hydroxide (TMAH). Derivatization with both NaBEt₄ and NaBPr₄ was evaluated, and analytical performances were compared. Two CRM materials, BCR-710 and CRM-477, were analyzed by both techniques to verify accuracy. A mixed spike containing ²⁰¹Hg-enriched methylmercury (MeHg), ¹⁹⁹Hg-enriched inorganic mercury (iHg), ¹¹⁹Sn-enriched monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT) as well as homemade ¹¹⁶Sn-enriched monophenyltin (MPT), diphenyltin (DPT), and triphenyltin (TPT) was used for the isotope dilution analysis of samples. The two techniques studied were compared in terms of classic analytical parameters: linearity, precision or repeatability (i.e., percent relative standard deviation, RSD%), limit of detection (LOD), and limit of quantification (LOQ), showing excellent linearity, precision below 12 % for all analytes, and LOQs of 0.06–1.45 pg for GC–MS and 0.02–0.27 pg for GC–ICP/MS.

Residue Analysis and Determination of IMI Herbicides in Sunflower and Soil by GC–MS

Sunflower agriculture is an important subsector that plays a key role in the economy of Turkey, contributing 1.38 million tonnes. The aim of this study is to investigate the levels of imidazolinone (IMI) group herbicides in Thrace Region, Turkey. In particular, we aimed to determine the residue levels of imazamox, a herbicide used in sunflower production in Thrace Region, in soil, different parts of plant, and seed. Five herbicides were identified in sunflower samples using solid–liquid extraction with gas chromatography–electrospray ionization mass spectrometry (GC–EI–MS) on single-quadruple instruments in selected ion monitoring (SIM) mode. The optimized conditions were found to be mobile-phase flow rate of 1 mL min^?1 and injection volume of 3 μL in programmed temperature vaporization (PTV) solvent vent mode. The recovery of imazamox, imazaquin, imazethapyr, imazapyr, and imazapic from sunflower plant and soil was 89 and 99, 104 and 105, 92 and 93, 96 and 92, and 99 and 96%, respectively.     

Residue Analysis of Propionylbrassinolide in Fruit and Vegetables by GC–MS

A rapid and simple method for the determination of propionylbrassinolide residues in tomatoes, apples and grapes using GC–MS is reported. Samples were extracted with acetonitrile, and the extracts were analyzed without any further clean-up. The results showed good linearity (r ² > 0.99) with standard solutions over the concentration range of 0.5–50 mg L⁻¹. The LODs and LOQs of propionylbrassinolide were 0.15 and 0.5 mg kg⁻¹ in all samples. Recoveries were in the range of 81.9–111.2%, with corresponding RSDs of 4.6–12.9% for three fortified levels. Intra- and inter-day RSDs were in the ranges of 1.5–14.2% and 5.3–15.6%. It was demonstrated that the proposed method is simple and efficient, and particularly suitable for detecting propionylbrassinolide residues in fruit and vegetables.     

Residue Analysis of Propionylbrassinolide in Fruit and Vegetables by GC–MS

A rapid and simple method for the determination of propionylbrassinolide residues in tomatoes, apples and grapes using GC–MS is reported. Samples were extracted with acetonitrile, and the extracts were analyzed without any further clean-up. The results showed good linearity (r ² > 0.99) with standard solutions over the concentration range of 0.5–50 mg L^?1. The LODs and LOQs of propionylbrassinolide were 0.15 and 0.5 mg kg^?1 in all samples. Recoveries were in the range of 81.9–111.2%, with corresponding RSDs of 4.6–12.9% for three fortified levels. Intra- and inter-day RSDs were in the ranges of 1.5–14.2% and 5.3–15.6%. It was demonstrated that the proposed method is simple and efficient, and particularly suitable for detecting propionylbrassinolide residues in fruit and vegetables.     

Gamma radiolytic degradation of fluoranthene and monitoring of radiolytic products using GC–MS and HPLC

Removal of priority pollutant fluoranthene in methanol by gamma-irradiation under varied conditions has been optimized. The influence of applied dose and dose rate on the degradation of fluoranthene under nitrogen has been investigated. The preliminary radiolytic degradation efficiency has been monitored by spectrophotometry. HPLC and GC–MS have been used to study the nature of degradation pattern. It is found that four main degradation products are formed and detected by HPLC. Different reversed phase columns have been used for the separation of degraded products under optimum chromatographic conditions. For 2 kGy dose ⩾80% fluoranthene has been degraded at dose rate 200 Gy/h. However, a dose of 370 Gy/h was more effective and it produces for less degradation products. Radiolytic degraded fluoranthene was also analyzed to detect various degradation products using GC–MS. It was proposed that major products were hydrocarbons and methoxy group containing organic compounds after comparing their mass spectra with the installed NIST mass spectral library.     

Micro-pyrolysis of technical lignins in a new modular rig and product analysis by GC–MS/FID and GC × GC–TOFMS/FID

A new offline-pyrolysis rig has been designed to allow multifunctional experiments for preparative and analytical purposes. The system conditions can be set and monitored, e.g. temperature, its gradients and heat flux. Some special features include (1) high heating rates up to 120 °C/s with pyrolysis temperatures up to 850 °C at variable pyrolysis times and (2) the selection of different atmospheres during pyrolysis. A complete mass balance of products and reactants (gas, liquids and solids) by gravimetric methods and sequential chromatographic analyses was obtained.The pyrolytic behaviour and the decomposition products of lignin-related compounds were studied under different conditions: heating rates (from 2.6 °C/s up to 120 °C/s), pyrolysis temperatures at 500 °C and 800 °C in different atmospheres (N₂, H₂, and mixtures of N₂ and acetylene). Kraft lignin, soda lignin, organosolv lignin, pyrolytic lignin from pine bio-oil, residues from biomass hydrolysis and fermentation were studied.The obtained pyrolysis products were classified into three general groups: coke, liquid phase and gas phase (volatile organic compounds (VOC) and permanent gases). The liquid fraction was analysed by GC–MS/FID. In addition, comprehensive two-dimensional GC was applied to further characterise the liquid fraction. VOCs were semi-quantified by a modified headspace technique using GC–MS/FID analysis. The micro-pyrolysis rig proved to be an efficient and useful device for complex pyrolysis applications.     

Analysis of phenanthrene biodegradation by using FTIR,UV and GC–MS

The aim of this paper is to assess the biodegradation of phenanthrene by Flavobacteria FCN2 which was isolated from coke plant sludge via a classical shaken liquid medium enrichment method. The strain FCN2 can decompose phenanthrene (50 mg l^?1) completely within 5 days. The values of pH decrease to 6.7 from 7.2 during degradation periods. And a detailed phenanthrene metabolism was assayed by using FTIR, UV and GC–MS. For FTIR, appearance of new broad absorption bands at 2858 cm^?1, 2927 cm^?1, 2955 cm^?1 and another new strong absorption band at 1734 cm^?1 in metabolites demonstrates that carboxyl group produced during phenanthrene degradation. Besides this, a very strong absorption band appears at 1260 cm^?1. It is ascribed to C–C stretching vibration band in carbonyl group of arone. Two weak adsorption at 334 nm and 349 nm in UV spectra were assigned to the n-π* transition of CO of aldehyde. Two metabolites, phenanthrene-dihydrodiol and naphthalene-1-diol were identified in neutral fraction of phenanthrene degradation by using GC–MS. As a result carboxylic acids and arone were generated during biodegradation of phenanthrene by Flavobacteria FCN2.     

Determination of carbamates and organophosphorus pesticides by SDME–GC in natural water

Water contamination due to the wide variety of pesticides used in agriculture practices is a global environmental pollution problem. Analytical methods with low quantification limits are necessary. The application of a new extraction technique, solvent drop microextraction (SDME), followed by gas chromatography with a nitrogen-phosphorus detector, was assessed for determining carbamates and organophosphorus pesticides in natural water. Experimental parameters which control the performance of SDME such as selection of microextraction solvent, optimization of organic drop volume, effects of sample stirring, salt addition, and, finally, sorption time profiles were studied. Once SDME was optimized, analytical parameters such as linearity (r ²>0.99), precision (<13%), and detection limits (0.2 to 5 μg/L), plus matrix effects were evaluated (no matrix effects were found). SDME is a dynamic technique able to extract pesticides from water in 14 min; the use of organic solvents and water samples for SDME is negligible compared to other extraction techniques.     

Headspace single-drop microextraction and GC–ECD determination of chlorpyrifos-ethyl in rat liver

The present work describes a headspace single-drop microextraction (HS-SDME) method in conjunction with gas chromatography electron capture detection (GC–ECD) for the determination of an organophosphate insecticide, chlorpyrifos-ethyl (CPF), in rat liver. Sample preparation included tissue homogenization with methanol in the presence of anhydrous sodium sulfate in order to isolate CPF from the matrix, followed by dilution with 10 mL of 0.1 M H₂SO₄ and headspace microextraction to a 2-μL drop of 1-octanol. The main factors affecting extraction efficiency were optimized [temperature 90 °C, preheating and extraction times of eight and six minutes, respectively, 2 g of (NH₄)₂SO₄, stirring rate of 1000 rpm, 200 μL of methanolic extract]. The method allows for the separation and quantitation of residue levels of CPF in the livers of rats exposed orally to that insecticide. Using internal standardization (with chlorpyrifos-methyl used as an internal standard), the linearity of the method was demonstrated in the range 10–2500 ng g⁻¹ with a correlation coefficient R > 0.996 and a satisfactory level of precision (RSD 3.85%, n = 6). Moreover, the results obtained with the new method do not differ from those obtained with the conventional residue method used in our laboratory. The feasibility of this HS-SDME approach as an equivalent analytical method for the determination of CPF in rat liver that possessess advantages such as low cost, low solvent consumption and high throughput was confirmed. Figure Headspace single-drop microextraction     

Determination of Estragole in Fennel Herbal Teas by HS-SPME and GC–MS

Estragole, a volatile phenylpropanoid contained in a variety of edible herbs, has been demonstrated to be genotoxic and carcinogenic, and its addition as a flavoring substance to foodstuffs has been banned by the regulatory bodies of the European Union. Fast and accurate analytical methods for its determination in herbs are thus necessary to assess the dietary exposure of this substance in humans and, in particular, to sensitive groups. In the present study, headspace solid-phase microextraction (HS-SPME) combined with gas chromatography–mass spectrometry (GC–MS) was applied for determination of estragole in infusions from different widely used commercial herbal teas based on Foeniculum vulgare (fennel) seeds. The optimized HS-SPME extraction conditions involved the use of a polydimethylsiloxane fiber exposed to the herbal infusion for 20 min at 50°C followed by GC–MS analysis. The method was fully validated for linearity, sensitivity, accuracy, and precision and applied to real samples; the level of estragole in infusions of commercial fennel seed teas was found to be within 50–250 µ`^?1.     

Species-specific isotope-ratio measurements of volatile tin and antimony compounds using capillary GC–ICP–time-of-flight MS

The analytical performance of an axial inductively-coupled-plasma time-of-flight mass spectrometer (ICP–TOFMS) as a detector for fast transient chromatographic signals resulting from the coupling to capillary gas chromatography (CGC) was investigated. A cryotrapping GC–ICP–TOFMS method for the determination of volatile metal(loid) compounds (VOMs) in gases was used and the suitability of the TOF mass analyzer for multi-elemental speciation analysis and multi-isotope ratio determinations was studied in terms of accuracy and precision. Isotope ratios ¹¹⁸Sn/¹²⁰Sn and ¹²¹Sb/¹²³Sb have been determined in in-house gas standard atmospheres in Tedlar bags at two different levels (100 pg and 1 ng) for different elemental species (SnH₄, MeSnH₃, Me₂SnH₂, Me₃SnH, BuSnH₃, SbH₃, and MeSbH₂). A limitation arising from counting statistics in both detection modes could be shown. A solution containing rhodium (10 ng mL^–1) and cadmium (40 ng mL^–1) was introduced simultaneously to the GC outlet. Rhodium acts as a continuous internal standard and Cd is used for mass-bias correction (by measuring the ¹¹¹Cd/¹¹³Cd ratio). The detection system in both pulse counting and analog mode was examined. The best attainable precision was established for Me₂SnH₂ (analog mode, 12 replicates, 1 ng, RSD 0.34%, accuracy 0.31%) whereas most other species ranged between 0.4 and 0.5% RSD if higher concentrations were used. The limitations of the pulse counting system are clearly seen, with peak heights of more than 2000 counts reaching saturation (for an integration time of 100 ms), which reduces the accuracy of isotope ratio determinations. A dozen VOM could be detected in an aged landfill gas sample; several unidentified Sn compounds were present. Although their isotope ratios are within the confidence value of the standards, it is not yet clear if the acquired precision is good enough to identify isotopic fractionation of metal(loid)s through biovolatilization processes. With the precision achieved, the combination of cryotrapping GC and ICP–TOFMS is a powerful tool for monitoring volatile multi-element species in multi-tracer experiments and isotope dilution methodology. Received: 23 November 2000 / Revised: 19 February 2001 / Accepted: 24 February 2001     

Determination of gasoline and diesel residues on wool,silk, polyester and cotton materials by SPME–GC–MS

The identification of ignitable liquids is very important and challenging aspect in arson crime investigations. The detection of gasoline and diesel fuel components using solid phase micro-extraction prior to gas chromatography–mass spectrometry for the forensic analysis of fire debris has been carried out. Previous works show that the absorption characteristics of the substrate are one of the most important factors in determining the evaporation rate of the accelerants. In order to determine the presence of the fuel residues, four of the most common substrate materials were tested in this work; wool, cotton, silk and polyester. The obtained results indicate that both gasoline and diesel fuel accelerants persisted longer on wool and silk than on the other selected substrates. Such information illustrates the influence of fuel persistence times after extinguishing and the best materials to be scanned for ignitable liquids at the fire scene.     

GC–MS法分析茵陈挥发油成分

采用水蒸气蒸馏法提取茵陈中挥发性成分挥发油,用气相色谱–质谱联用技术(GC–MS)对茵陈挥发油成分进行分析鉴定,并采用峰面积归一化法测定其相对含量。共检出52种挥发性成分,鉴定了其中31种主要挥发性成分,含量较高的组分为石竹素(15.27%)、(–)-斯巴醇(6.64%)、石竹烯(4.89%)等。GC–MS法适用于茵陈挥发性成分的定性分析,具有灵敏度高、分析速度快的特点。