Adiabatic three-waveguide directional coupler

We propose a three-waveguide directional coupler based on adiabatic evolution of a single normal mode of the system and analyze its switching properties using coupled mode theory. In our scheme the propagation coefficients of the waveguides are constant and the coupling coefficients are variable. This device works in the case that the propagation coefficients of the two outer waveguides are identical and that the coupling coefficients are designed to act in a counterintuitive order.     

Fabrication of Triplexers Based on Flattop SOI AWG

A triplexer is fabricated based on SOI arrayed waveguide gratings （AWGs）. Three wavelengths of the triplexer operate at different diffraction orders of an arrayed waveguide grating. The signals of 1490nm and 1550nm, which are input from central input waveguide of an AWG, are demultiplexed and the signal of 131Onto, which is input from central output waveguide of an AWG, is uploaded. The tested results show that the downloaded and uploaded signals have fiat-top response. The insertion loss is 9 dB on chip, the nonadjacent crosstalk is less than -30 dB for 1490nm and 1301 nm, and is less than -25 dB for 1550nm, the 3dB bandwidth equates that of the input light source.     

Geometry Parameter Optimization of Large Cross-Sectional S-Shaped Bent Rib Waveguides for Silicon Based Optical Switches

By using a genetic algorithm, geometry parameters of large cross-sectional S-bend rib waveguides are optimized aiming at the least total loss when the propagation loss is considered. Optimized results axe presented as an example of S-bend rib waveguides based on silicon-on-insulator （SOI） 4 × 4 optical switches. The value of 2 dB/cm is given to the propagation loss according to the experimental results. The simulation results indicate that the total loss drops from 1.0002rib down to 0.4375dB without considering a lateral offset. If the offset is adopted, the total loss reduces from 0.5463dB to 0.2365dB. In addition, the effect of the rib height ratio on the loss is analysed, and the optimal ratio is obtained to be 0.55.     

Resonant coupling into hybrid 3D micro-resonator devices on organic/biomolecular film/glass photonic structures

We have designed and realized an integrated photonic family of micro-resonators (MR) on multilayer SU8/lipidic film/glass materials. Such a family involves hybrid 3D-MR structures composed of spherical glass-MR arranged upon organic pair-SU8-waveguides, an efficient coupling being ensured with a Langmuir-Blodgett Dipalmitoylphosphatidylcholine (DPPC-lipid from Avanti Polar^®) film whose thickness is ranging from 12 to 48 nm. We have characterized such add/drop filters, respectively, in intensity and spectral measurements, and experimentally achieved an evanescent resonant-photonic-coupling between the 3D-MR and the 4-ports structure through the DPPC-gap. Spectral resonances have been measured for 4-whispering gallery-modes (WGM) into such 3D-structures, respectively, characterized with a 0.97 nm free spectral range (FSR) and a high quality Q-factor up to 4.10⁴.     

Vector modes of rectangular-core dielectric waveguides: An improved perturbation approach

We present an improved analysis to obtain vector modes of a rectangular-core waveguide (RCW) structure whose dielectric constant profile is separable in x and y coordinates. Using this analysis, a perturbation method is then developed to obtain vector modes of a practical RCW. The propagation constants so obtained for a fully-buried and a ridge RCW structure using the present analysis are found to be in better agreement with reported numerical values than the ones obtained with an earlier reported perturbation approach [Kumar et al., Opt. Lett. 8 (1983) 63].     

Planar Er- and Yb-doped amplifiers and lasers

New results in erbium-doped planar waveguide amplifiers and lasers are presented. The waveguides are produced in silica-on-silicon technology using plasma-enhanced chemical vapor deposition. Waveguide propagation losses outside the erbium absorption band are improved to values below 0.05 dB/cm for a core–cladding index step of around 1.4%. Amplifier arrays show a net gain of more than 12 dB over the entire C-band. Received: 13 June 2001 / Published online: 23 October 2001     

Analysis and optimization of an InGaAsP/InP waveguide variable optical attenuator

An InGaAsP/InP waveguide variable optical attenuator (VOA) is proposed in this paper. The device consists of straight input and output waveguides and an S-bend waveguide. An electrode is deposited on a portion of the waveguide to form an active region so that its refractive index can be modified by a current injection, resulting in the variation of the transmitted optical power. The beam propagation method is employed in the numerical simulation and the device structure is optimized using a genetic algorithm. The optimized VOA has a low excess loss (<1 dB) and a large dynamic range of about 40 dB.     

Tunable discrete Talbot effect in inhomogeneous photonic lattices

We discuss the discrete Talbot effect in one- and two-dimensional waveguide lattices under the influence of an external potential. It is shown that the field recovery can be precisely tuned by changing the gradient of the potential. In a two-dimensional configuration, the diagonal coupling does not affect the period of recovery.     

A comparative study of soliton switching in a two- and three-core coupler with TOD and IMD

A numerical study of soliton switching in a two- and three-core coupler is carried out taking into account the effect of intermodal dispersion and third-order dispersion. A two and three-core coupler with linear and triangular configuration is considered. It is found that the three-core coupler with linear configuration shows the best switching characteristics.     

Effect of particle defects on an Echelle grating demultiplexer

The impact of particle defects in the free propagation region on the performance of an etched diffraction grating demultiplexer is analyzed in the present paper. Numerical simulations using a method of moment and a Green function method show that particle defects with some special sizes can result in a strong resonance with the incident wavelength and will produce a large scattering loss.     

Improved optimal variational method to analyze optical rib waveguides

We present an improved optimal variational method (Vopt) to overcome the assumption of field separability in the two orthogonal directions. The improved Vopt method is shown to give accurate results with less computational effort. The method is applied to rib waveguides and the results are compared with those obtained using the computationally intensive finite-element method.     

Optimal design of multimode interference couplers using an improved self-imaging theory

Self-imaging theory is widely accepted as a good method in designing 1 × N multimode interference (MMI) couplers, but it is also true that self-imaging theory is not suitable for low-contrast structures. An improved self-imaging theory is proposed in this paper for the optimal design of low-contrast 1 × N MMI couplers. The average effective width of MMI waveguide and the average effective propagation constant of MMI waveguide are used as the basis to modify the conventional self-imaging theory. A direct calculation of the average effective width of low-contrast MMIs is presented. We use this approach in the optimal design of a 1 × 4 silica MMI coupler, and the results show that the improved self-imaging theory is more accurate than conventional self-imaging theory for low-contrast structures, the results also show that if the material parameters and the width of an MMI waveguide are fixed, the average effective width of the MMI waveguide will increase with the decrease of the height of the core layer.     

Bending Efficiency of Bent Multiple-Slot Waveguides

The bending efficiency of three-dimensional bent multiple-slot waveguides is studied by applying a combined method of effective-index and modified transfer-matrix methods. The effects of asymmetric structure, asymmetric slots, and asymmetric middle strips on the bending efficiency are investigated. We show that the bending efficiency can be improved by the use of asymmetric structures and asymmetric middle strips. The bending efficiency of different slot waveguides （up to quintuple-slot structure） is compared. It is revealed that although the single-slot waveguide in general provides the lowest bending loss for the same waveguide parameters, it is possible that the multiple-slot waveguide can present a lower bending loss than the single-slot one.     

Modelling and Analysis of Modal Behaviour in SOI Slot Waveguides

Mode behaviour for SOI slot waveguides is modelled and analysed using a numerical full vectorial method based on the film mode matching method （MMM）. Only the quasi-TE mode is investigated. Waveguide heights and slot widths, as well as silicon widths are properly chosen with respect to the single mode behaviour in the slot region. Comparison between the effective index method and our side loss method shows that our single mode condition is creditable. The optical power confinement in slot region for the quasi-TE mode is also studied and presented. We demonstrate that the maximum achievable optical power confinement Pslot and the maximum normalized average optical intensity Islot are 42% and 26um^-2, respectively.     

Multichannel silicon WDM ring filters fabricated with DUV lithography

We have fabricated 9-channel silicon wavelength-division-multiplexing (WDM) ring filters using 193 nm deep-ultraviolet (DUV) lithography and investigated the spectral properties of the ring filters by comparing the transmission spectra with and without an upper cladding. The average channel-spacing of the 9-channel WDM ring filter with a polymeric upper cladding is measured about 1.86 nm with the standard deviation of the channel-spacing about 0.34 nm. The channel crosstalk is about −30 dB, and the minimal drop loss is about 2 dB.     

Dust-acoustic solitary waves in an adiabatic hot dusty plasma

An adiabatic hot dusty plasma (containing non-inertial adiabatic electron and ion fluids, and negatively charged inertial adiabatic dust fluid) is considered. The basic properties of arbitrary amplitude dust-acoustic (DA) solitary waves, which exist in such an adiabatic hot dusty plasma, are explicitly examined by the pseudo-potential approach. To compare the basic properties (critical Mach number, amplitude and width) of the DA solitary waves observed in a dusty plasma containing adiabatic electron, ion and dust fluids with those observed in a dusty plasma containing isothermal electron and ion fluids and adiabatic dust fluid, it has been found that the adiabatic effect of inertia-less electron and ion fluids has significantly modified the basic properties of the DA solitary waves, and that on the basic properties of the DA solitary waves, the adiabatic effect of electron and ion fluids is much more significant than that of the dust fluid.     

An Easily Operating Polymer 1×4 Optical Waveguide Switch Matrix Based on Vertical Couplers

A three-dimensional （3D） polymer thermo-optic （TO） 1 × 4 waveguide switch matrix based on vertical couplers is demonstrated. It consists of four basic 3D switch units and because of its 3D structure, its construction is compact, only 9 mm in length; moreover, the control logic of the entire switch is very simple, the light signal can be easily switched to any output port by operating only a single switch unit. The finished devices exhibit a switching extinction ratio greater than 21 dB for all of four output ports and the crosstalk between two adjacent output ports is lower than -19 dB. The rise time and the fall time of the switch matrix are 0.8ms and 1.4ms, respectively. The required electrical power to initiate the switching function for M1 switching units is about 50mW.     

变耦合系数非线性三波导定向耦合器特性研究

报道了对高斯型及指数型变耦合系数三波导耦合器的一些重要的全光开关特性进行的研究。利用四阶龙格一库塔方法对指数型和高斯型两类变耦合系数三波导耦合器进行了数值计算。数值计算结果表明：对于变耦合系数三波导耦合器而言,功率可在波导1与波导3之间100％转换,而波导2则不可能达到100％的功率输出。与双波导变耦合系数耦合器相比,在相同的最大耦合系数情况下三波导变耦合系数耦合器开关曲线要更陡一些．即具有更好的开关特性。与平行三波导耦合器相比,变耦合系数三波导耦合器作为光开关的最大优点在于开关曲线中不存在振荡。     

Experimental observation and numerical simulation of guided modes in Nd:YLiF4 channel waveguides produced by carbon ion implantation

We report on, to our knowledge the first time, the channel waveguide formation in Nd:YLiF₄ laser crystal produced by 6 MeV carbon ion implantation. The guided modes are observed by using an end‐face arrangement. We construct the two‐dimensional (2D) refractive index profile of the channel waveguide cross section, which is based on the related planar waveguide index distribution as well as the rectangular shape of the waveguide cross sections. The modal intensity distribution is numerically calculated by using the beam propagation method according to the reconstructed index profile, which shows a reasonable agreement with the experimental result. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Vertically and laterally waveguide-coupled cylindrical microresonators in Si3N4 on SiO2 technology

High-finesse laterally and vertically waveguide-coupled cylindrical microresonators have been designed and realized in Si₃N₄ on SiO₂ technology using conventional optical lithography. Based on the experimental results and detailed simulations, a comparison between the lateral and vertical coupling schemes is made. Received: 16 May 2001 / Revised version: 13 August 2001 / Published online: 2 November 2001