Infrared spectroscopy analysis of mixed DPPC/fibrinogen layer behavior at the air/liquid interface under a continuous compression-expansion condition

The mixed layer behavior of dipalmitoyl phosphatidylcholine (DPPC) with fibrinogen at continuously compressed-expanded air/liquid interfaces was analyzed in situ by infrared reflection-absorption spectroscopy (IRRAS). The reflectance-absorbance (RA) intensities and/or wavenumbers of nu(a)-CH2 and amide I bands for a mixed DPPC/fibrinogen layer at the interface were obtained directly by an infrared spectrometer with a monolayer/grazing angle accessory and a removable Langmuir trough. The nu(a)-CH2 RA intensity-area hysteresis curves of a DPPC monolayer indicate a significant loss of free DPPC molecules at the interface during the first compression stage, which is also supported by the corresponding nu(a)-CH2 wavenumber-area hysteresis curves. For a mixed DPPC/fibrinogen layer at the interface, the amide I RA intensity-area hysteresis curves suggest that the fibrinogen molecules were expelled from the interface upon compression, apparently because of the presence of insoluble DPPC molecules. The squeeze-out of fibrinogen evidently removed a pronounced amount of DPPC from the interface, as judged from the corresponding nu(a)-CH2 intensity and wavenumber data. Moreover, significant adsorption of fibrinogen was found during the subsequent interface expansion stage. With the in situ IRRAS analysis of the mixed layer behavior at the interface, the induced loss of DPPC by fibrinogen expulsion from the compressed interface and the dominant adsorption of fibrinogen to the expanded interface were clearly demonstrated.     

Roles of gamma-Globulin in the Dynamic Interfacial Behavior of Mixed Dipalmitoyl Phosphatidylcholine/gamma-Globulin Monolayers at Air/Liquid Interfaces

This study investigated the roles of gamma-globulin in the dynamic interfacial behavior of dipalmitoyl phosphatidylcholine (DPPC)/gamma-globulin monolayers at air/liquid interfaces at 25 degrees C. The surface tension behavior demonstrated that gamma-globulin had a large adsorption time scale. Moreover, the surface pressure-area hysteresis behavior of adsorbed gamma-globulin monolayers suggested that no significant desorption occurred during the compression stage, and the respreading of gamma-globulin molecules at the interface during the expansion stage was slow. From the hysteresis behavior of adsorbed gamma-globulin monolayers with spread DPPC molecules, it was found that gamma-globulin molecules were expelled from the interface as DPPC molecules were in a condensed state. The squeeze-out of gamma-globulin molecules seemed to induce the loss of DPPC molecules at the interface with the extent depending on the initial gamma-globulin surface concentration. Furthermore, the expelled gamma-globulin molecules re-entered the monolayer and participated in the surface pressure increase during the following expansion stage. The exclusion of gamma-globulin associated with the removal of DPPC during monolayer compression and the re-entry of gamma-globulin during subsequent monolayer expansion represented a mechanism for DPPC depletion and gamma-globulin enrichment at the interface, which may explain the inhibitory effect of certain proteins on the surface activity of DPPC. Copyright 2000 Academic Press.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Structural characteristics of dipalmitoylphosphatidylcholine and hydrolysates from sunflower protein isolate mixed monolayers spread at the air-water interface

In this work, surface film balance and Brewster angle microscopy techniques have been used to analyze the structural characteristics (structure, topography, reflectivity, thickness, miscibility, and interactions) of hydrolysates from sunflower protein isolate (SPI) and dipalmitoylphosphatidylcholine (DPPC) mixed monolayers spread on the air-water interface. The degree of hydrolysis (DH) of SPI, low (5.62%), medium (23.5%), and high (46.3%), and the protein/DPPC mass fraction were analyzed as variables. The structural characteristics of the mixed monolayers deduced from the surface pressure (pi)-area (A) isotherms depend on the interfacial composition and degree of hydrolysis. At surface pressures lower than the equilibrium surface pressure of SPI hydrolysate (pi(e)(SPI hydrolysate)), both DPPC and protein are present in the mixed monolayer. At higher surface pressures (at pi > pi(e)(SPI hydrolysate)), collapsed protein residues may be displaced from the interface by DPPC molecules. The differences observed between pure SPI hydrolysates and DPPC in reflectivity (I) and monolayer thickness during monolayer compression have been used to analyze the topographical characteristics of SPI hydrolysates and DPPC mixed monolayers at the air-water interface. The topography, reflectivity, and thickness of mixed monolayers confirm at microscopic and nanoscopic levels the structural characteristics deduced from the pi-A isotherms.     

Hysteresis behavior of amphiphilic model peptide in lung lipid monolayers at the air-water interface by an IRRAS measurement

Pulmonary functions such as rapid adsorption, respreading, and hysteresis behavior of pulmonary surfactants are very important for respiratory movement. The interfacial behavior of pulmonary preparations containing an amphiphilic peptide (Hel 13-5) has recently investigated. An orientation of hydrophobic chains in a dipalmitoylphosphatidylcholine (DPPC) with or without palmitic acid (PA) is associated with a collapse of alveoli during respiration process. Therefore, the present study focused on the acyl chain orientation in model pulmonary surfactants (DPPC/Hel 13-5 and DPPC/PA/Hel 13-5). A successive change in the orientation during cyclic compression and expansion of films at the air-water interface can be probed directly by an infrared reflection-absorption spectrometry (IRRAS) technique. The hysteresis behavior, one of very important pulmonary functions, was previously observed in surface pressure (pi)-molecular area (A) isotherms for the both model pulmonary surfactant systems (Langmuir 22(2006)1182-1192 and Langmuir 22(2006)5792-5803). In addition, it was reported that Hel 13-5 was squeezed-out of the surface on compression like native pulmonary surfactant proteins. The data obtained for the binary and ternary systems were compared with those of the equivalent pure DPPC and DPPC/PA mixtures, respectively. For an asymmetric methylene stretching vibration (nu(a)-CH(2)) RA intensity, the absolute RA values increased with shifting to small surface area, monotonously. For the corresponding wavenumber, on the other hand, the values gradually decreased into approximately 2920cm(-1). However, they were kept constant in the squeeze-out region in spite of a further decrease of surface area. These results suggested that the orientation of hydrophobic chains in DPPC and DPPC/PA mixtures became in the most packed state soon after emergence of the squeeze-out process of Hel 13-5 and then the packed orientation was retained up to the collapse state. This indicated that the squeezed-out Hel 13-5 stabilized monolayers left at the interface. For the DPPC/PA/Hel 13-5 system, in particular, dissociated PA molecules were excluded together with Hel 13-5 and the surface monolayers were refined to DPPC and undissociated PA components during the compression process. And the similar behavior in the second and third cycles supported the good respreading ability of the monolayers containing Hel 13-5.     

Thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface

This study investigated the thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface at 37°C. Surface pressure–area isotherms and relaxation curves for the mixed monolayers were obtained by using a computer-controlled film balance. In the thermodynamic analysis of the mixed monolayers, the areas of monolayers exhibited negative deviations from the ideal values at all compositions for lower surface pressures. However, at higher surface pressures, distinctively positive deviations from ideality were observed at lower DPPC contents. Excess free energies of mixing had been calculated and the most stable state of the mixed monolayer with x_DPPC=0.5 or 0.6 was found. Moreover, the relaxation kinetics of the mixed monolayers was investigated by measuring the surface area as a function of time at a constant surface pressure of 40 mN m⁻¹. It was shown that the relaxation processes could be described by the models considering nucleation and growth mechanisms.     

On the interaction of dipalmitoyl phosphatidylcholine with normal long-chain alcohols in a mixed monolayer: a thermodynamic study

This study investigated the mixed monolayer behavior of dipalmitoyl phosphatidylcholine (DPPC) with normal long-chain alcohols at the air/water interface. Surface pressure–area isotherms of mixed DPPC/C₁₈OH and DPPC/C₂₀OH monolayers at 37°C were obtained and compared with previous results for the mixed DPPC/C₁₆OH system. The negative deviations from additivity of the areas and the variation of the collapse pressure with composition imply that DPPC and long-chain alcohols were miscible and formed non-ideal monolayers at the interface. At lower surface pressures, it seems that the attractive intermolecular force was dominant in molecular packing in the mixed monolayers. At higher surface pressures, the data suggest that the molecular packing in mixed DPPC/C₁₆OH monolayers may be favored by the packing efficiency or geometric accommodation. Furthermore, negative values of excess free energy of mixing were obtained and became significant as the hydrocarbon chain length of alcohols increased, which indicates there were attractive interactions between DPPC and long-chain alcohols. In each free energy of mixing–composition curve, there was only one minimum and thus a phase separation did not exist for mixed DPPC/long-chain alcohol monolayers.     

Syntheses and properties of novel non-ionic fluorinated multichains “star-like” surfactants

A series of star-like nonionic surfactants (with two hydrophobic and two hydrophilic chains) with different lengths of hydrophilic and hydrophobic arms were synthesised on the basis of pyromellitic acid dianhydride. The hydrophilic arms were formed by polyoxyethylene and hydrophobic ones either by perfluoro- or by alkyl chains. The adsorption monolayers (Gibbs monolayers) were studied by surface pressure (π) measurements as a function of time for different surfactant concentrations. For the spread monolayers (Langmuir monolayers), the measurements of the surface pressure (π) versus the molecular area (A) as well as the relaxation measurements of the area (A) as a function of time at constant surface pressure were performed. The comparison between the characteristic parameters of two types of monolayers was made in order to understand the effect of the preparation conditions on the structure of these monolayers.It was found that decreasing the fluoroalkyl chain length induced a systematical decrease in the stability of Langmuir monolayers, which is manifested as the Marangoni-Gibbs viscoelasticity of the monolayers. For the surfactants, which have a large number of oxyethylene groups, adsorption at the air/water interface from the bulk solution required extremely long times to reach equilibrium due to the diffusion from the solution and to the conformational rearrangements at the interface. The observation of a hysteresis in the compression/decompression curves for these compounds is explained by the presence of the residual organic solvent molecules absorbed by oxyethylenic chains. A novel model describing the kinetics of desorption or rearrangement of molecules during the lateral compression was suggested, allowing the estimation of both characteristic time of this process and areas per molecule at the equilibrium from the relaxation curves A(t).     

Interaction of N-nitrosodiethylamine/bovine serum albumin complexes with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine monolayers at the air-water interface

We report the effect of N-nitrosodiethylamine (NDA) on the interaction between bovine serum albumin (BSA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine monolayers (DPPC) at the air-water interface. We prepared aqueous solutions of NDA/BSA complexes maintaining a constant concentration of BSA of 1.49 x 10(-9) M and using NDA concentrations to obtain 2000, 4000, 6000, 12,500, and 25,000 NDA/BSA molar ratios. The hysteresis area and the compressional modulus of the compression-expansion cycles performed at different times were dependent on the NDA concentration. The cycles performed demonstrate the stability of the new phase of DPPC/BSA and DPPC/NDA/BSA monolayers. This was achieved probably because the BSA concentration used was lower than the one needed for BSA to inhibit the return of DPPC molecules to the interface. Results of the compressional modulus at the onset of the new phase, obtained around 17 mN/m, 15 min and 1, 3, 5, and 12 h after DPPC deposition, indicated that the 3.0 x 10(-6) M NDA concentration produced a more rigid film, probably due to the higher alpha-helix content of BSA. AFM images were obtained for DPPC/BSA and two DPPC/NDA/BSA complexes. Our images show that 12,500 NDA/BSA molecules were mostly adsorbed in the liquid condensed phase. However, BSA molecules were distributed more homogeneously.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

Effect of hydrocarbon chain and pH on structural and topographical characteristics of phospholipid monolayers

Structural characteristics (structure, elasticity, topography, and film thickness) of dipalmitoyl phosphatidylcholine (DPPC) and dioleoyl phosphatidylcholine (DOPC) monolayers were determined at the air-water interface at 20 degrees C and pH values of 5, 7, and 9 by means of surface pressure (pi)-area (A) isotherms combined with Brewster angle microscopy (BAM) and atomic force microscopy (AFM). From the pi-A isotherms and the monolayer elasticity, we deduced that, during compression, DPPC monolayers present a structural polymorphism at the air-water interface, with the homogeneous liquid-expanded (LE) structure; the liquid-condensed structure (LC) showing film anisotropy and DPPC domains with heterogeneous structures; and, finally, a homogeneous structure when the close-packed film molecules were in the solid (S) structure at higher surface pressures. However, DOPC monolayers had a liquid-expanded (LE) structure under all experimental conditions, a consequence of weak molecular interactions because of the double bond of the hydrocarbon chain. DPPC and DOPC monolayer structures are practically the same at pH values of 5 and 7, but a more expanded structure in the monolayer with a lower elasticity was observed at pH 9. BAM and AFM images corroborate, at the microscopic and nanoscopic levels, respectively, the same structural polymorphism deduced from the pi-A isotherm for DPPC and the homogeneous structure for DOPC monolayers as a function of surface pressure and the aqueous-phase pH. The results also corroborate that the structural characteristics and topography of phospholipids (DPPC and DOPC) are highly dependent on the presence of a double bond in the hydrocarbon chain.     

Preparation of microscopic and planar oil-water interfaces that are decorated with prescribed densities of insoluble amphiphiles

Langmuir monolayers (monolayers of insoluble molecules formed at the surface of water), and associated Langmuir-Blodgett/Schaefer monolayers prepared by transfer of Langmuir films to the surfaces of solids, are widely used in studies aimed at understanding the physicochemical properties of biological and synthetic molecules at interfaces. In this article, we report a general and facile procedure that permits transfer of Langmuir monolayers from the surface of water onto microscopic and planar interfaces between oil and aqueous phases. In these experiments, a metallic grid supported on a hydrophobic solid is used to form oil films with thicknesses of 20 mum and interfacial areas of 280 mum x 280 mum. Passage of the supported oil films through a Langmuir monolayer is shown to lead to quantitative transfer of insoluble amphiphiles onto the oil-water interfaces. The amphiphile-decorated oil-water interfaces hosted within the metallic grids (i) are approximately planar, (ii) are sufficiently robust mechanically so as to permit further characterization of the interfaces outside of the Langmuir trough, (iii) can be prepared with prescribed and well-defined densities of amphiphiles, and (iv) require only approximately 200 nL of oil to prepare. The utility of this method is illustrated for the case of the liquid crystalline oil 4-pentyl-4'-cyanobiphenyl (5CB). Transfer of monolayers of either dilauroyl- or dipalmitoylphosphatidylcholine (DLPC and DPPC, respectively) to the nematic 5CB-aqueous interface is demonstrated by epifluorescence imaging of fluorescently labeled lipid and polarized light imaging of the orientational order within the thin film of nematic 5CB. Interfaces prepared in this manner are used to reveal key differences between the density-dependent phase properties of DLPC and DPPC monolayers formed at air-water as compared to that of nematic 5CB-aqueous interfaces. The methodology described in this article should be broadly useful in advancing studies of the interfacial behavior of synthetic and biological molecules at liquid-liquid interfaces.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Thermodynamic characterization of the prevailing molecular interactions in mixed floating monolayers of phospholipids and usnic acid

The investigation of the characteristics of mixed floating monolayers of phospholipids and usnic acid (UA), an active metabolite from lichens, can provide valuable information on how to prepare stable liposomes that could serve as carriers of UA for therapeutic proposes. The present paper is concerned with the thermodynamic analysis of the behavior of Langmuir monolayers formed by mixing different phospholipids (dibehenoylphosphatidylcholine, DBPC, dipalmitoylphosphatidylcholine, DPPC, and dioleoylphosphatidylcholine, DOPC) and UA at varied molar fractions. Relevant thermodynamic parameters such as excess areas, excess free energies and free energy of mixing were derived from the surface pressure data obtained from compression measurements performed in a Langmuir trough. For the largest lateral pressure examined (25 mN/m), negative values of the excess free energy were found only for the DOPC/UA monolayer, which should be the most stable of them. Based on the calculated values of the free energy of mixing, we note that the DBPC/UA and DPPC/UA systems present the best mixed character at low pressures and when the molar fraction of the UA is 0.5; at that relative concentration and at low values of the external pressure, the UA molecules can better mix and interact with the phospholipid molecules. The compression isotherms for mixed monolayers show no visible transitions, exhibiting a more organized phase that corresponds to a negative free energy of mixing. We have established that the most stable monolayers were those corresponding to DOPC/UA mixtures with a UA molar fraction of 0.75.     

Biophysical investigation of the interfacial properties of cationic fluorocarbon/hydrocarbon hybrid surfactant: mimicking the lung surfactant protein C

The interfacial behavior of the newly designed Fluorocarbon Hydrocarbon Cationic Lipid (FHCL or CH(3)(CH(2))(17)N(+)(C(2)H(5))(2)(CH(2))(3)(CF(2))(7)CF(3)I(-)) and its mixtures with a phospholipid (DPPC, Dipalmitoylphosphatidylcholine) at different mole fractions were investigated. This new molecule was synthesized to mimic the selected properties of lung surfactant, which is a natural lipid-protein mixture which is known to play important roles in the process of respiration, by considering the structure/function relation of lung surfactant protein (SP-C). Each segment in the molecular structure was selected to affect the molecular level interaction at the interface whereas the keeping the overall structure as simple as possible. The surface pressure area isotherms obtained for the mixtures of DPPC/FHCL indicated that there was repulsive interaction between DPPC and FHCL molecules. Due to the molecular level interaction, specifically at mole fraction 0.3, the isotherm obtained from that mixture resembled the isotherm obtained from the DPPC monolayer in the presence of SP-C. High elasticity of the interface was one of the important parameters for the respiration process, therefore, shear and dilatational elasticities of two-component systems were determined and they were found to be similar to the case where SP-C protein is present. Fluorescence microscopy images were taken in order to investigate the monolayer in details. The FHCL was able to fluidize the DPPC monolayer even at high surface pressures effectively. In addition, the cyclic compression-expansion isotherms were obtained to understand the spreading and re-spreading ability of the pure FHCL and the mixed DPPC/FHCL monolayers. At a specific mole fraction, X(FHCL)=0.3, the mixture exhibited good hysteresis in area, compressibility, recruitment index and re-spreading ability at the interface. All these results point out that FHCL can fulfill the selected features of the lung surfactant that are attributed to the presence of SP-C protein when mixed with DPPC, even if the molecular structure of the FHCL is quite simple.     

髓鞘碱性蛋白对细胞膜脂质分子DPPC、DPPE单层膜影响机理研究

本文通过Langmuir单层膜的表面压力-平均分子面积(π-A)曲线的测定与分析,分别对髓鞘碱性蛋白(MBP)与细胞膜中不同头部基团脂质分子二棕榈酰基磷脂胆碱(DPPC)和二棕榈酰基磷脂酰乙醇胺(DPPE)在空气/液体界面上的相互作用过程进行了系统研究.实验结果表明:(1)当界面上脂质含量一定时,亚相中随着MBP浓度的增大,DPPC、DPPE单层膜的等温线向平均分子面积较大的方向移动;(2)在单层膜表面压力为10 mN/m时,一个MBP分子分别结合140±3个DPPC分子和100±3个DPPE分子,随着表面压力增大,当MBP分子分别与两种磷脂分子相互作用时,MBP插入到磷脂单层界面的个数逐渐减少;(3)随着蛋白质浓度的增加,脂分子形成的单层膜变得较为疏松,且MBP分子易于插入到分子头部较小的DPPE单层膜中;(4)蛋白质的存在使DPPC单层膜的表面压力逐渐减小,且蛋白质浓度越大表面压力降低越多,DPPC被MBP带入到亚相中越多;(5)对于DPPE单层膜,蛋白质通过与DPPE相互作用插入到界面膜中,引起表面压力增大,且蛋白质浓度越高,压力变化量越大.     

Topography of dipalmitoyl-phosphatidyl-choline monolayers penetrated by β-casein

In this work we have analyzed the topography by atomic force microscopy (AFM) of dipalmitoyl-phosphatidyl-choline (DPPC) monolayers previously spread at the air–water interface and penetrated by β-casein. AFM images of β-casein–DPPC monolayers were taken from Langmuir–Blodgett films deposited onto hydrophilic mica substrates at different initial surface pressures (π_i) and after the compression of the mixed films. The monolayer topography depends on the initial structure of the phospholipid:liquid expanded (LE) at 3 mN/m, coexistence between LE and liquid condensed (LC) structures at 7 mN/m, at the end of the LE–LC transition at 10 mN/m, and with a LC structure at 15 mN/m. The area occupied by DPPC domains in the mixed film increases with the π_i value, especially for DPPC with a LC structure at 15 mN/m. At this surface pressure the thickness of the film is at a maximum. After the film compression at 25 mN/m, which is above the equilibrium spreading pressure of β-casein (), this protein is displaced from the interface by DPPC and the topography of the mixed monolayer depends on the initial structure of the DPPC monolayer. A notable feature of the topography of these mixed monolayers is the presence of multilayers of β-casein and DPPC of high thickness (50–70 nm) at the lower π_i values. Although the film is dominated by DPPC at the highest surface pressures (at 25 mN/m), β-casein is not displaced totally from the interface and coexists as β-casein collapsed domains within the network of the DPPC structure.     

Mixed layers of DPPC and a linear poly(ethylene glycol)-b-hyperbranched poly(glycerol) block copolymer having a cholesteryl end group

Interactions of the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) with the amphiphilic diblock copolymer Ch-lPEG₃₀-b-hbPG₂₄ (ChP) are studied at the air–water interface by surface pressure–mean molecular area (π–mmA) measurements of mixed Langmuir films and adsorption measurements of ChP to the air–water interface covered with DPPC monolayers at different initial surface pressure values π ₀. ChP is composed of a single hydrophobic cholesteryl (Ch) moiety covalently bound to a diblock copolymer consisting of a hydrophilic linear poly(ethylene glycol) (lPEG) block and a hydrophilic hyperbranched poly(glycerol) (hbPG) block. Langmuir isotherms and compression moduli of the mixed Langmuir films of different molar ratios reveal distinct interactions between DPPC and ChP during compression. It is demonstrated that the behavior of the DPPC/ChP mixtures is dominated by DPPC up to a molar ratio of 10:1, whereas the behavior is predominantly governed by ChP in mixtures with lower DPPC content (molar ratios of 5:1, 2:1, and 1:1). In adsorption measurements, a strong affinity of ChP to DPPC is observed after injection into the water subphase. The surface pressure value π _in up to which ChP is able to penetrate into DPPC monolayers is determined to the remarkably high value of 48.2 mN/m which attests the favorable interactions between DPPC and the Ch moiety of ChP. Atomic force microscopy on LB films of DPPC/ChP mixtures of different molar ratios transferred onto hydrophilic substrates confirms the presence of two different phases, a DPPC-rich phase and a ChP-rich phase.     

Excess fibrinogen adsorption to monolayers of mixed lipids

Adsorption of fibrinogen to the monolayers of mixed lipids, dipalmitoyl phosphatidyl choline (DPPC) and eicosylamine (EA) was measured at a surface pressure of 20 mN/m by an in situ surface plasmon resonance technique. Pressure–area isotherms of DPPC + EA mixtures on water and buffer subphases indicated good lipid miscibility and some contraction of the monolayers at intermediate and higher surface pressures. Surface electric potential of the DPPC + EA monolayers showed excess values for intermediate DPPC:EA ratios. Fibrinogen adsorption and its adsorption rates from a dilute solution (0.03 mg/ml) were proportional to the fraction of EA in the monolayer indicating that protein binding was primarily driven by electrostatic interactions between positive EA charges in the monolayer and a net negative protein charge. At a higher protein concentration (0.06 mg/ml) both the fibrinogen adsorbed amount and its maximum adsorption rate showed excess values relative to the pure EA for 1:1, 2:1 and 3:1 DPPC + EA monolayers. This excess adsorption could be explained, in part, by the contraction of the monolayers with intermediate DPPC:EA ratios which resulted in an excess surface electric potential.     

Wetting in oil/water/surfactant systems

The behaviour of oils at aqueous interfaces is ubiquitous to many industrially and biologically relevant processes. In this review we consider modifications to the wetting properties of oils at the air/water, oil/water and solid/liquid interfaces in the presence of surfactants. First-order wetting transitions can be induced in a wide range of oils by varying the aqueous surfactant concentration, leading to the formation of mixed monolayers at the interface. In certain cases, these mixed monolayers display novel surface freezing behaviour, including the formation of unusual bilayer structures, which further modifies the properties of the interface. The effects of surfactant on line tension at the three-phase contact line and differences between the air/liquid and liquid/liquid interfaces are discussed.