Applications of enzyme-catalysed reactions in trace analysis-III Determination of silver and thiourea by their combined inhibition of invertase

Thiourea has been found to enhance the inhibition of invertase by silver ions. The effect is applied to the determination of 1–5 × 10⁻⁷ M silver and of 10⁻⁷–10⁻⁸ M thiourea. A mechanism is suggested for the enhancement.     

Analysis of glutamate in striatal microdialysates using capillary electrophoresis and laser-induced fluorescence detection

High-performance liquid chromatography (HPLC) with electrochemical detection has been used routinely to analyse the neurochemical constituents of brain microdialysates. However, conventional HPLC analysis requires large injection volumes and hence lengthy dialysis sampling times. Capillary electrophoresis (CE) is a rapid high-resolution separation technique with the ability to routinely handle very small sample volumes. If CE is coupled to a high-sensitivity detection system, such as laser-induced fluorescence (LIF), it becomes a powerful and rapid separation technique for the analysis of small-volume microdialysis samples.

These preliminary studies report reduced separation times for the excitatory amino acid glutamate, prederivatised with naphthalene 2,3-dialdehyde, and demonstrate its detection within small-volume brain microdialysis samples. The limit of detection for this system was 10⁻⁸ M.

Characterisation of striatal microdialysis samples comprised infusions of Ca²⁺-free artificial cerebrospinal fluid (aCSF) and Tetrodotoxin (TTx) (10 mM) to demonstrate that the detected transmitter is of neuronal origin and released in a calcium-dependent manner.

Removal of calcium from aCSF resulted in a decrease in glutamate in dialysis samples. Glutamate release significantly decreased (p<0.05) to ca. 40% of preinfusion control levels after 60 min and this level was maintained throughout the sampling period. These data suggest that glutamate release is, to some degree, a calcium-dependent process. TTx infusion (10 μM) produced a significant (p<0.05) reduction in glutamate release to ca. 10% of preinfusion levels. It would therefore appear that glutamate release is dependent on neuronal activity. In summary, we have demonstrated the establishment of CE-LIF and microdialysis for the measurement of glutamate.     

Determination of organic peroxides by liquid chromatography with on-line post-column ultraviolet irradiation and peroxyoxalate chemiluminescence detection

A combination of the electrophoretically mediated microanalysis methodology with a partial filling technique was applied for the inhibition study of bovine liver rhodanese by 2-oxoglutarate. In this set-up, part of the capillary is filled with the best buffer for the enzymatic reaction, while the rest of the capillary is filled with the optimal background electrolyte for separation of substrates and products. The estimated value of K_I for 2-oxoglutarate was 3.62·10⁻⁴±1.43·10⁻⁴ M with respect to cyanide and 1.40·10⁻³±1.60·10⁻⁴ M with respect to thiosulfate. In addition, the type of inhibition was also evaluated. The findings of 2-oxoglutarate as the competitive inhibitor with respect to cyanide and as the uncompetitive inhibitor with respect to thiosulfate are in accordance with previous literature data.     

Applications of enzyme-catalysed reactions in trace analysis-II Determination of cyanide, sulphide, and iodine with invertase

Methods are described for the determination of cyanide (10⁻⁸–10⁻⁵M and sulphide (10⁻⁷–10⁻⁵ M) based on the de-inhibitory effect of these ions on invertase inhibited by mercury(II) or by silver. Iodine (0.1–3 μg) may be determined by its inhibition of invertase.     

Square-wave adsorptive stripping voltammetry of menadione (vitamin K(3))

Menadione (vitamin K₃) undergoes a reversible two-electron transfer involving the quinone structure in acidic medium. As demonstrated by using cyclic voltammetry, the reduced form is more strongly adsorbed than the oxidized one. Stripping voltammetry of an adsorbed layer has been applied to the determination of this molecule after preconcentration of the reduced compound and scanning the potential towards less negative values. Adsorption, which is highly effective when stirring is used, approaches an equilibrium process in quiescent solution, as evidenced by a loss of part of the adsorbed material when stirring is stopped. A square-wave mode has been selected owing to its high sensitivity (the current is 20 times that for the differential pulse mode), but also to its high scan-rate, which minimizes the slow desorption process occurring during the scan. A concentration range from 2 × 10⁻¹⁰ to 5 × 10⁻⁷ M is easily investigated, the detection limit being 1.3 × 10⁻¹⁰ M. The influence of several operational parameters has also been considered.     

Low-molecular-mass anion screening for forensic environmental analyses by capillary zone electrophoresis with indirect UV detection

A method for low-molecular-mass anion screening is described using a buffer composed of 5-sulfosalicylate (SS) as a visualizing ion, hexadimethrine bromide as an electroosmotic flow modifier and Tris as a pH buffer component, at pH 8.6. All ions with effective mobility higher than 2610⁻⁹ m² s⁻¹ V⁻¹ can be separated within 7.5 min under −30 kV. By using the moderately mobile SS (5410⁻⁹ m² s⁻¹ V⁻¹), not only the sensitivity of the detection is improved due to its high UV absorptivity, but also a smaller overall overloading effect is achieved. Meanwhile, the resolution of the high mobility ions, which is normally critical, remains almost the same as compared to a chromate buffer. With an electrokinetic injection, the limit of detection (LOD) of the common ions is 2–13 nM and the detection range is linear up to 0.5–3 μM. With a hydrostatic injection the LOD is 0.15–1 μM and the detection range is linear up to 25–200 μM. The identification of ions is performed by comparing the mobility of the ions with that of standards, taking the apparent and effective mobility of HCO₃⁻, which is normally present in the sample solution, as a reference.     

Determination of divalent trace metals in natural waters by preconcentration on N,N,N′,N′-tetra(2-aminoethyl)ethylenediamine-silica followed by on-line ion chromatography

A method for the on-line preconcentration and chromatography of trace metals, e.g., Co, Ni, Cu, Zn, Cd and Pb, on N,N,N′,N′-tetra(2-aminoethyl)ethylenediamine-bonded silica is described. The preconcentrated metals were desorbed with 0.13 M tartrate, which allows direct separation on a cation-exchange chromatographic column. The metals separated were detected by postcolumn reaction with 4-(2-pyridylazo)resorcinol and measuring the absorbances at 500 nm. Linear calibration graphs were obtained over the range 1 · 10⁻⁸−3 · 10⁻⁶ M. The synthesis and characteristics of the chelated silica are described. The method was applied to the analysis of river and interstitial sediment waters.     

Acidity constants of benzidine in aqueous solutions

The acidity constants of benzidine (Bz) in aqueous solutions determined potentiometrically at 25° were K_a1 = (1.11 ± 0.08) × 10⁻⁵, K_a2 = (1.45 ± 0.12) × 10⁻⁴. The apparent mixed constants in 0.1M sodium nitrate are K_a1 = (5.37 ± 0.28) × 10⁻⁶ and K_a2 = (1.14 ± 0.09) × 10⁻⁴. The ultraviolet spectra were recorded as a function of pH and analysed with these constants to obtain the absorption spectra of H₂Bz²⁺, HBz⁺ and Bz; the corresponding wavelengths of maximal absorption are 247, 273 and 278 nm, and molar absorptivities 1.63 × 10⁴, 1.76 × 10⁴ and 2.26 × 10⁴ 1.mole⁻¹.cm⁻¹.     

Ion chromatography of nitrite at the ppb level with photometric measurement of iodine formed by post-column reaction of nitrite with iodide

The difficulty in ion-chromatographic determination of nitrite in aqueous solutions containing a high concentration of chloride arises mainly from incomplete resolution of the peaks for these anions on the separation column whose efficiency is not high. A photometric measurement of iodine formed by a reaction of nitrite with iodide has been found to make it possible to determine, chromatographically, trace amounts of nitrite without any interference from chloride; chloride does not oxidize iodide to produce iodine. The proposed method was based on the separation of nitrite from matrix anions on a silica-based anion-exchange column with a 1.5·10⁻³ M phthalate eluent (pH 5.0), followed by photometric measurement of the iodine (as triiodide) formed via a post-column reaction of the separated nitrite with iodide. The optimal conditions for the post-column reaction were established by varying the concentrations of iodide, copper(II) and nitric acid in a post-column-reaction solution and the length of a reaction tube. A calibration graph for nitrite, plotted as peak heights versus concentrations, was linear up to 1.50·10⁻⁵ M (690 ppb). The detection limit, defined at S/N=3, was 1.00·10⁻⁷ M (4.60 ppb) nitrite. The presence of chloride ions up to 0.01 M did not give any interference to the determination of nitrite. This method was successfully applied to the determination of nitrite in lake water, river water, sewage works water and snow samples without any pretreatment.     

Studies on the extraction and determination of metals-I Extraction of hafnium into methyl isobutyl ketone and tributyl phosphate

The effect of various factors on the distribution of hafnium ( 5.60 × 10⁻⁴M) between different acids and methyl isobutyl ketone (MIBK) or tributyl phosphate (TBP) was studied by using ^{176 + 181} Hf as a tracer, when the extraction is made from 7.5–11M hydrochloric acid with an equal volume of IM TBP in benzene, hafnium is extracted quantitatively (>99%). The hafnium can be stripped with 1–3M hydrochloric acid.     

Flow injection visible diffuse reflectance quantitative analysis of nickel

Flow injection (FI) methodology, using diffuse reflectance in the visible region of the spectrum, for the analysis of nickel, precipitated in the form of dimethylglyoximate, is presented. A reflectance cell, constructed in polytetrafluoroethylene, using a LED (light emitting diode) as light source and a LDR (light dependent resistor) as detector, is described. The analytical signal (S) correlates with nickel concentration (C) between 1.6 × 10⁻⁴ and 6.6 × 10⁻⁴ mol L⁻¹. This correlation is described by the equation S = −1.108 + 3.314 × 10⁴C − 2.081 × 10⁷C² (r = 0.9996). The experimentally observed limit of detection is about 1.3 × 10⁻⁴ mol L⁻¹, as in lower concentrations the formation of precipitate is not observed. The experimental quantitation limit is about 1.6 × 10⁻⁴ mol L⁻¹. The mean R.S.D. (relative standard deviation) is about 2.7%. Samples containing nickel were analyzed and the results obtained in this method were compared with those of other methods using the statistical Student's t-test.     

Time measurement-visual analysis of nickel(II) using autocatalytic reaction with sodium sulfite/hydrogen peroxide system and its application to the length detection-flow analysis

Trace amounts of nickel(II) can function as a trigger (=reaction initiator) in an autocatalytic reaction with the sodium sulfite/hydrogen peroxide system. Based on this finding, sub-μg L⁻¹ levels of nickel(II) were determined by a time measurement using the autocatalytic reaction. The detection range using the above method was 10⁻⁹–10⁻⁵ M, the detection limit (3σ) was 8.1 × 10⁻¹⁰ M (0.047 μg L⁻¹), and the relative standard deviation was 2.66% at nickel(II) concentration of 10⁻⁷ M (n = 7). This method was applied to length detection-flow injection analysis. The detection range for the flow injection analysis was 2 × 10⁻⁹–2 × 10⁻³ M. The detection limit (3σ) was 1.4 × 10⁻⁹ M (0.082 μg L⁻¹), and the relative standard deviation was 1.86 at initial nickel(II) concentration of 10⁻⁶ M (n = 7).     

A trimethoprim-selective membrane electrode

An electrode selective for trimethoprim is based on the ion-pair complex of trimethoprim with silicotungstate, and gives rapid response to change in trimethoprim concentration over the range 3 × 10⁻⁵−2 × 10⁻² M with a response slope of 51.0 ± 1.5 mV/decade. No significant interferences are caused by sulpha-drugs. The electrode can be used for the potentiometric determination of trimethoprim.     

Rates of the reactions CN + H2CO and NCO + H2CO in the temperature range 294–769 K

The rate coefficients of the reactions: (1) CN + H₂CO → products and (2) NCO + H₂CO → products in the temperature range 294–769 K have been determined by means of the laser photolysis-laser induced fluorescence technique. Our measurements show that reaction (1) is rapid: k₁(294 K) = (1.64 ± 0.25) x 10⁻¹¹ cm³ molecule⁻¹ s⁻¹; the Arrhenius relation was determined as k₁ = (6.7 ± 1.0) x 10⁻¹¹ exp[(−412 ± 20)/T] cm³ molecule⁻¹ s⁻¹. Reaction (2) is approximately a tenth as rapid as reaction (1) and the temperature dependence of k₂ does not conform to the Arrhenius form: k₂ = 4.62 x 10⁻¹⁷T^1.71 exp(198/T) cm³ molecule⁻¹ s⁻¹. Our values are in reasonable agreement with the only reported measurement of k₁; the rate coefficients for reaction (2) have not been previously reported.     

The effect of trace levels of cyanide on the formation of mercury-iodide complexes

The interference of trace levels of cyanide with the formation of iodo-mercury complexes is made the basis of a method of trace analysis for cyanide. The decrease in absorbance of the iodo-mercury complexes is a linear function of total cyanide concentration up to about 5 × 10⁻⁵M in 0.1M sodium hydroxide medium when the iodide and mercury total concentrations are 0.05M and 3 × 10⁻⁵M respectively. Several cyano-mercury complexes are formed simultaneously, and quite a large fraction of the cyanide remains uncomplexed.     

Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Simultaneous determination of selenium and lead in whole blood samples by differential pulse polarography

The polarographic reduction of lead in the presence of selenite gives rise to an additional peak corresponding to the reduction of lead (Pb) on adsorbed selenium (Se) on mercury at −0.33 V. The selenium and lead content can be determined using this peak by the addition of a known amount of one of these ions first and then the second ion. The linear domain range of lead is 5.0×10⁻⁷–2.0×10⁻⁵ M and for selenium 5.0×10⁻⁷–1.0×10⁻⁵ M. Using this method 4.90×10⁻⁷ M Se(IV) and 1.47×10⁻⁶ M Pb(II) in a synthetic sample could be determined with a relative error of +2.0% and 1.8%, respectively (n=4). A recovery test after acid digestion for a synthetic sample was 97% for selenium and 96.5% for lead. The method was applied to 1 ml of digested blood, and 328±23 μg l⁻¹ Se(IV) and 850±62 μg l⁻¹ Pb(II) could be determined with a 90% (n=5) confidence interval.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Preparation of a potentiometric immobilized urease electrode and urea determination in serum

Polyvinylalcohol was activated with 2-fluoro-1-methylpyridiniumtoluene-4-sulphonate and urease (EC.3.5.1.5) was covalently linked to the activated matrix. PVA-urease was then immobilized on the surface of a pH glass electrode with gelatine gel and it was cross-linked using glutaraldehyde. This potentiometric membrane electrode provides a linearity to urea in the 8.910⁻⁵ to 1.110⁻³ M concentration range, but by changing the buffer concentration can be studied in the range of 10⁻⁴ to 10⁻² M urea concentration. Reproducibility experiments (n:20) were carried out with the urease enzyme electrode and with photometric methods for pooled serum sample. Average values for the two methods were 5.96 and 5.86 mM, variation coefficients were 2.5 and 3.5% respectively.     

[Ir(3,4,7,8-Me4phen) (CH2=CH2)2Cl]: A very active catalyst precursor for hydrogen transfer from alcohols to unsaturated organic substrates

Some new complexes of the type Ir¹chel(CH₂=CH₂)₂Cl (chel = bipy; 4,4′-Me₂bipy; 4,4′-Ph₂bipy; phen; 5,6-Me₂phen; 4,7-Ph₂phen; 3,4,7,8-Me₄phen) behave as catalyst precursors for the hydrogen transfer from alcohols to ketones and Schiff bases. The most active of the complexes is the 3,4,7,8-Me₄phen derivative, which, at 83°C, gave turnovers of up to 2850 cycles/min with cyclohexanone, 2700 cycles/min with 4-tert-butylcyclohexanone and 5000 cycles/min with benzylidenaniline, at a catalyst concentration of 4 X 10⁻⁵ M and a KOH (cocatalyst) concentration of 8 X 10⁻⁴ M. Good catalytic activity was observed also at room temperature. Some catalytic activity was found at low substrate concentrations, even in the absence of KOH. The maximum stereoselectivity reached in the reduction of 4-tertbutylcyclohexanone was 97%, the trans-alcohol being formed.