等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

酵母对抑制剂耐受的系统分析

纤维素生产乙醇的关键问题之一是水解产生的抑制性物质对乙醇发酵具有明显的抑制效应,因而引起了国内外研究者的广泛关注.研究发现,在抑制剂存在下,酵母在基因表达水平,蛋白水平和代谢物水平都有相应的耐受响应,且这些响应错综复杂.从系统角度运用组学的方法研究这一体系将有助于全面深入了解酵母的耐受机制.本文综述了系统研究的思路和方法在酵母对抑制剂耐受方面的研究状况;对主要研究手段和成果进行了回顾;并对酵母发酵乙醇系统分析的前景进行了展望.     

Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

UV-cured polymer electrolyte membranes for Li-cells: Improved mechanical properties by a novel cellulose reinforcement

One of the main drawbacks that restricts the practical application of gel-polymer electrolytes is the inferior mechanical performance compared to other available systems. In this work, we have reinforced UV-cured methacrylic membranes with cellulose. To enhance its compatibility with the polymer matrix, cellulose is modified by UV-grafting poly(ethylene glycol) methyl ether methacrylate on it. Excellent mechanical properties are obtained and good ionic conductivity values are observed, enlightening that this kind of membrane is an interesting candidate for future applications as thin gel-polymer electrolyte in flexible lithium batteries.     

优化碳包覆对正极材料LiFePO4/C高倍率性能的影响

碳包覆层的结构和形态对LiFePO4正极材料的电子电导率影响很大. 本文以聚丙烯和葡萄糖为碳源, 二茂铁为催化剂前驱体, 采用原位固相法合成LiFePO4/C复合材料, 并对其微观结构和形貌, 碳的结构与含量, 电化学性能进行分析. 结果表明, 聚丙烯热解形成的碳包覆层石墨化程度高, 可提高材料的高倍率放电性能. 二茂铁的加入有助于优化包覆层的碳结构. 制备的LiFePO4/C复合材料具有优异的高倍率电化学性能, 10C (1C=170 mA·g-1)放电比容量达到145 mAh·g-1.     

锂金属电池用三维半互穿网络聚合物电解质的制备

锂金属电池作为下一代高比能量电池技术受到人们越来越广泛的关注。然而由锂枝晶生长引发的安全问题是锂金属电池商业化面临的最大挑战之一。具有高锂离子迁移数和离子电导率的聚合物电解质是抑制锂枝晶生长的重要策略之一。本文将季戊四醇四丙烯酸酯和自由基引发剂AIBN添加至商业化电解液中,采用具有单离子传导功能的多孔聚合物电解质为锂金属电池的电解质隔膜,通过在电池内部发生热诱导原位聚合制备三维半互穿网络单离子传导聚合物电解质,达到提高电解质隔膜离子电导率和机械拉伸性能,以及有效抑制锂枝晶生长的目的。通过该策略的实施,成功获得了室温离子电导率0.53 mS·cm^-1和锂离子迁移数0.65的良好结果。应用于锂金属电池,证明该电解质能够有效抑制锂枝晶的生长和倍率性能的提高,为锂金属电池的开发提供了良好的解决路径。     

Preparation of Spinel Cathode Materials Li1+xMn2-xO4 by In-situ Redox Precipitation Method for Lithium Rechargeable Batteries

Spinel Li_1+xMn_2-xO₄ has been studied extensively as a promising cathode material for lithium rechargeable batteries with high energy density due to the following advantages. (1) it is less expensive; (2) it is less toxic; (3) it is easier to prepare than layered LiCoO₂ and LiNiO₂. The preparation methods have important and remarkable effects on the electrochemical properties of spinel Li_1+xMn_2-xO₄ cathode material. Li1+,Mn2_x04 powders are typically synthesized by solid state reaction which consists of extensively mechanical mixing and intermitted grinding^[1,2]. This treatment is detrimental to the quality of the final product because of the resulting inhomogeneity, irregular morphology, larger particle size with broader particle diameter distribution, and poor control of stoichiometry resulted from lithium loss at high temperature for long time. In order to achieve good efficiency of lithium utilization at high current and high reliability of lithium rechargeable batteries, we developed a new synthesis process which was called as in-situ redox precipitation method^[3]. By this method, the Li_1+xMn_2-xO₄ cathode material with good homogeneity, uniform morphology and narrow particle-size distribution as well as excellent electrochemical performance can be easily produced at lower temperature and in a shorter processing time. In this paper, our partial findings were reported.     

Synthesis and crystal structure of polyaryl substituted diene derivatives based on the reduction of diphenylacetylene with lithium naphthalenide

The reduction of diphenylacetylene with lithium naphthalenide produced two kinds of intermediates,1 or 2,depending on the ratio of diphenylacetylene to lithium naphthalenide.A series of polyaryl substituted ethylene/diene derivatives were synthesized by reaction of electrophⅡes with the corresponding intermediates produced in situ.All new compounds were fully characterized,and their single crystal structures were determined.     

锂电池原位与非原位表征技术研究

锂电池的电化学性能与电子及离子在体相与界面的输运、反应、储存行为有关. 从原子尺度到宏观尺度,对电池材料在平衡态与非平衡态过程的电子结构、晶体结构、微观形貌、化学组成、物理性质的演化研究对于理解锂离子电池中各类构效关系至关重要,这需要综合多种原位与非原位表征技术. 目前,基础研究处于前沿的发达国家在这些方面取得了卓有成效的进展. 本文简介了中国科学院物理研究所近年来通过国内外合作,采用原位X射线衍射（in-situ XRD）、原位X射线吸收谱（in-situ XAS）、准原位/原位扫描电镜（quasi/in-situ SEM）、球差校正扫描透射电镜（HAADF/ABF-STEM）、扫描力曲线（Force-Curve）、中子衍射（Neutron Diffraction）、热重-差示扫描量热-质谱联用（TG-DSC-MS）、表面增强拉曼（SERS）等技术研究锂离子电池电极材料结构演化方面的进展,并对未来锂离子电池研究中先进表征技术的发展进行了简要的探讨.     

Large Scale Synthesis of Three-dimensional Hierarchical Porous Framework with High Conductivity and its Application in Lithium Sulfur Battery

Quick capacity loss due to the polysulfide shuttle effects and poor rate performance caused by low conductivity of sulfur have always been obstacles to the commercial application of lithium sulfur batteries. Herein, an in-situ doped hierarchical porous biochar materials with high electron-ion conductivity and adjustable three-dimensional (3D) macro-meso-micropore is prepared successfully. Due to its unique physical structure, the resulting material has a specific surface area of 2124.9 m² g⁻¹ and a cumulative pore volume of 1.19 cm³ g⁻¹. The presence of micropores can effectively physically adsorb polysulfides and mesopores ensure the accessibility of lithium ions and active sites and give the porous carbon material a high specific surface area. The large pores provide channels for the storage of electrolyte and the transmission of ions on the surface of the substrate. The combined effect of these three kinds of pores and the N doping formed in-situ can effectively promote the cycle and rate performance of the battery. Therefore, prepared cathode can still reach a reversible discharge capacity of 616 mAh g⁻¹ at a rate of 5 C. After 400 charge–discharge cycles at 1 C, the reversible capacity is maintained at 510.0 mAh g⁻¹. This new strategy has provided a new approach to the research and industrial-scale production of adjustable hierarchical porous biochar materials.     

新型锂盐LiBC2O4F2在EC＋DMC溶剂中的电化学行为

采用差热-热重(TG-DTA)、恒电流充放电和交流阻抗(EIS)分析了二氟草酸硼酸锂(LiODFB)的热稳定性,研究了LiODFB/碳酸乙烯酯(EC)+碳酸二甲酯(DMC)电解液的电化学性能及界而特征.实验结果表明,LiODFB不仅具有更高的热稳定性,而且在EC+DMC溶剂中具有较好的电化学性能.与使用LiPF6/EC+DMC的电解液相比,锂离子电池应用LiODFB基电解液在55℃的高温具有更好的容量保持能力;以0.5C、1C(1C=250 mA·g-1)倍率循环放电,两种电池间的倍率性能差别较小;LiODFB能够在1.5 V(vs Li/Li+)左右在石墨电极表面还原形成一个优异稳定的保护性固体电解质相界面膜(SEI膜);交流阻抗表明,使用LiODFB基电解液的锂离子电池仅具有稍微增加的界面阻抗.因此LiODFB是一种非常有希望替代LiPF6用作锂离子电池的新盐.     

基于原位体积加成制备导电线路的研究

本文提出一种制备导电电路的方法。以纳米铜为导电填料，以光固化树脂为连接剂，制备含铜光固化油墨，利用丝网印刷方法获得含有纳米铜的图案，利用铜与银盐间的置换反应，将铜纳米粒子图案通过原位体积加成转化为导电银图案。研究结果表明，铜图案不具有导电性，而置换反应生成的银图案具有导电性，且导电能力受铜含量、银盐浓度、光照时间、浸泡反应时间等因素影响，本实验中获得的最高电导率为1.25×10⁵ S/m，导电线路具有良好的耐弯曲、耐疲劳性能，同时兼具优异的可修复性能，为导电线路的制备提供了常温下简单有效、成本低廉的实现方法，具有重要的参考价值。     

In-situ deposition of Pd/Pd_4S heterostructure on hollow carbon spheres as efficient electrocatalysts for rechargeable Li-O_2 batteries

The sluggish kinetics of oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) have always restricted the development of lithium oxygen batteries(LOBs).Herein,hollow carbon spheres loaded with Pd/Pd_4S heterostructure(Pd/Pd_4S@HCS) were successfully prepared via the in-situ deposition to improve the electrocatalytic activities for both ORR and OER in LOBs.With the welldispersed Pd/Pd_4S nanoparticles,the hierarchical composite with large specific surface area offers favorable transport channels for ions,electron and oxygen.Especially,the Pd/Pd_4S nanoparticles could exhibit excellent electrochemical performance for ORR and OER due to their intrinsic catalytic property and interfacial effect from the heterostructure.Therefore,the LOBs with Pd/Pd_4S@HCS as cathode catalyst show improved specific capacities,good rate ability and stable cycling performance.