Orthogonal signal correction-partial least squares method for simultaneous spectrophotometric determination of cypermethrin and tetramethrin

The simultaneous determination of cypermethrin and tetramethrin mixtures by using spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS) regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 200-350 nm range for 25 different mixtures of cypermethrin and tetramethrin. Calibration matrices were containing 0.1-12.9 and 0.1-13.8 microg mL(-1) for cypermethrin and tetramethrin, respectively. The RMSEP for cypermethrin and tetramethrin with OSC and without OSC were 0.0884, 0.0614 and 0.2915, 0.2309, respectively. This procedure allows the simultaneous determination of cypermethrin and tetramethrin in synthetic and real samples good reliability of the determination was proved.     

Kinetic spectrophotometric determination of trace amounts of palladium by whole kinetic curve and a fixed time method using resazurine sulfide reaction

The univariate and multivariate calibration methods were applied for the determination of trace amounts of palladium based on the catalytic effect on the reaction between resazurine and sulfide. The decrease in absorbance of resazurine at 602 nm over a fixed time is proportional to the concentration of palladium over the range of 10.0-160.0 ng mL(-1). The calibration matrix for partial least squares (PLS) regression was designed with 14 samples. Orthogonal signal correction (OSC) is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration without loss of prediction ability using spectrophotometric method. The root mean square error of prediction (RMSEP) for palladium determination with fixed-time, PLS and OSC-PLS were 3.71, 2.84 and 0.68, respectively. This procedure allows the determination of palladium in synthetic and real samples with good reliability of the determination.     

Spectrophotometric simultaneous determination of nitroaniline isomers by orthogonal signal correction-partial least squares

The simultaneous determination of nitroaniline isomer mixtures by using spectrophotometric methods is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used for removes the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 200–500 nm range for 21 different mixtures of nitroaniline isomers. Calibration matrices were containing 1–21, 1–15 and 1–18 μg ml⁻¹ of m-nitroaniline, o-nitroaniline and p-nitroaniline, respectively. The RMSEP for m-nitroaniline, o-nitroaniline and p-nitroaniline with OSC and without OSC were 0.6567, 0.2692, and 0.3134, and 1.3818, 1.2181, and 0.3953, respectively. This procedure allows the simultaneous determination of nitroaniline isomers in real matrix samples and good reliability of the determination was proved.     

Spectrophotometric simultaneous determination of manganese(II) and iron(II) in pharmaceutical by orthogonal signal correction-partial least squares

The simultaneous determination of manganese(II) and iron(II) mixtures by using spectrophotometric methods is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used to remove the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 450-600 nm range for 21 different mixtures of manganese(II) and iron(II). Calibration matrices were containing 0.05-1.2 and 0.1-2.3 microg mL(-1) Mn(II) and Fe(II), respectively. The RMSEP for manganese(II) and iron(II) with OSC and without OSC were 0.0316, 0.0291, and 0.0907, 0.115, respectively. This procedure allows the simultaneous determination of manganese(II) and iron(II) in synthetic and real matrix samples with good reliability of the determination.     

Simultaneous spectrophotometric determination of cobalt,copper and nickel using 1-（2-thiazolylazo）-2-naphthol by chemometrics methods

The simultaneous determination of cobalt, copper and nickel using 1-（2-thiazolylazo）-2-naphthol （first figure of this article） by spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares （PLS） regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction （OSC） is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 550-750-nm range for 21 different mixtures of cobalt, copper and nickel. Calibration matrices were formed from samples containing 0.05-1.05, 0.05-1.30 and 0.05-0.80 μg·mL^-1 for cobalt, copper and nickel, respectively. The root mean square error of prediction （RMSEP） for cobalt, copper and nickel with OSC and without OSC were 0.007, 0.008, 0.011 and 0.031,0.037, 0.032 μg· mL^-1, respectively. This procedure allows the simultaneous determination of cobalt, copper and nickel in synthetic and real samples and good reliability of the determination was proved.     

Simultaneous spectrophotometric determination of mercury and palladium with Thio-Michler's Ketone using partial least squares regression and orthogonal signal correction

A simple, novel and sensitive spectrophotometric method was described for simultaneous determination of mercury and palladium. The method is based on the complex formation of mercury and palladium with Thio-Michler's Ketone (TMK) at pH 3.5. All factors affecting on the sensitivity were optimized and the linear dynamic range for determination of mercury and palladium found. The simultaneous determination of mercury and palladium mixtures by using spectrophotometric method is a difficult problem, due to spectral interferences. By multivariate calibration methods such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 360-660 nm range for 25 different mixtures of mercury and palladium. Calibration matrices were containing 0.025-1.60 and 0.05-0.50 microg mL(-1) of mercury and palladium, respectively. The RMSEP for mercury and palladium with OSC and without OSC were 0.013, 0.006 and 0.048, 0.030, respectively. This procedure allows the simultaneous determination of mercury and palladium in synthetic and real matrix samples good reliability of the determination.     

Combining orthogonal signal correction and wavelet packet transform with partial least squares to analyze overlapping spectra of three kinds of metal ions

A novel method named OSC-WPT-PLS approach based on partial least squares (PLS) regression with orthogonal signal correction (OSC) and wavelet packet transform (WPT) as pre-processed tools was proposed for the simultaneous spectrophotometric determination of Al(III), Mn(II) and Co(II). This method combines the ideas of OSC and WPT with PLS regression for enhancing the ability of extracting characteristic information and the quality of regression. OSC is used to remove information in the response matrix D by subtracting the structured noise that is orthogonal to the concentration matrix C. Wavelet packet transform was applied to perform data compression, to extract relevant information, and to eliminate noise and collinearity. PLS was applied for multivariate calibration and noise reduction by eliminating the less important latent variables. In this case, using trials, the kind of wavelet function, the decomposition level, the number of OSC components and the number of PLS factors for the OSC-WPT-PLS method were selected as Daubechies 4, 3, 2 and 3, respectively. A program (POSCWPTPLS) was designed to perform the simultaneous spectrophotometric determination of Al(III), Mn(II) and Co(II). The relative standard errors of prediction (RSEP) obtained for total elements using OSC-WPT-PLS, WPT-PLS and PLS were compared. Experimental results demonstrated that the OSC-WPT-PLS method had the best performance among the three methods and was successful even when there was severe overlap of spectra.     

Determination of polyphenols in oats by near-infrared spectroscopy (NIRS) and two-dimensional correlation spectroscopy

Two-dimensional correlation spectroscopy (2DCOS) and near-infrared spectroscopy (NIRS) were used to determine the polyphenol content in oat grain. A partial least squares (PLS) algorithm was used to perform the calibration. A total of 116 representative oat samples from four locations in China were prepared and the corresponding near-infrared spectra were measured. Two-dimensional correlation spectroscopy was employed to select wavelength bands for the PLS regression model for the polyphenol determination. The number of PLS components and intervals was optimized according to the coefficients of determination (R²) and root mean square error of cross validation (RMSECV) in the calibration set. The performance of the final model was evaluated using the correlation coefficient (R) and the root mean square error of validation (RMSEV) in the prediction set. The results showed the band corresponding to the optimal calibration model was between 1350 and 1848?nm and the optimal spectral preprocessing combination was second derivative with second smoothing. The optimal regression model was obtained with an R² of 0.8954 and an RMSECV of 0.06651 in the calibration set and R of 0.9614 and RMSEV of 0.04573 in the prediction set. These measurements reveal the calibration model had qualified predictive accuracy. The results demonstrated that the 2DCOS with PLS was a simple and rapid method for the quantitative determination of polyphenols in oats.     

Near Infrared Spectral Similarity Combined with Variable Selection Method in the Quality Control of Flos Lonicerae: A Preliminary Study

This paper indicates the possibility to use near infrared (NIR) spectral similarity as a rapid method to estimate the quality of Flos Lonicerae. Variable selection together with modelling techniques is utilized to select representative variables that are used to calculate the similarity. NIR is used to build calibration models to predict the bacteriostatic activity of Flos Lonicerae. For the determination of the bacteriostatic activity, the in vitro experiment is used. Models are built for the Gram‐positive bacteria and also for the Gram‐negative bacteria. A genetic algorithm combined with partial least squares regression (GA‐PLS) is used to perform the calibration. The results of GA‐PLS models are compared to interval partial least squares (iPLS) models, full‐spectrum PLS and full‐spectrum principal component regression (PCR) models. Then, the variables in the two GA‐PLS models are combined and then used to calculate the NIR spectral similarity of samples. The similarity based on the characteristic variables and full spectrum is used for evaluating the fingerprints of Flos Lonicerae, respectively. The results show that the combination of variable selection method, modelling techniques and similarity analysis might be a powerful tool for quality control of traditional Chinese medicine (TCM).     

Spectrum–effect relationship study between HPLC fingerprints and antioxidant of honeysuckle extract

Honeysuckle (Lonicera japonica flos) is a well‐known agent of edible and medicinal value in China and its antioxidative activity makes a major contribution to its dual use. However, the compounds responsible for its antioxidative activity are still unknown. In this study, 10 batches of honeysuckle were collected from different origins in China. The fingerprints were established by HPLC technique to investigate the compounds and a 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical scavenging activity assay was carried out to evaluate their antioxidant activity. partial least squares regression analysis was applied to set up the regression equation between DPPH radical scavenging activity and average peak area of common peaks of fingerprints. The results showed that peaks 10 (isochlorogenic acid B), 12 (isochlorogenic acid C), 11 (isochlorogenic acid A) and 9 (cynaroside) in the fingerprints were closely related to the antioxidant activity of 50% methanol extracts of honeysuckle. This study successfully established the spectrum–effect relationship between HPLC fingerprints and DPPH radical scavenging activity and provided a general model for exploring active components with a combination of chromatography and efficacy.     

Prediction of physical–chemical properties of crude oils by 1H NMR analysis of neat samples and chemometrics

In this work, we report the feasibility study to predict the properties of neat crude oil samples from 300‐MHz NMR spectral data and partial least squares (PLS) regression models. The study was carried out on 64 crude oil samples obtained from 28 different extraction fields and aims at developing a rapid and reliable method for characterizing the crude oil in a fast and cost‐effective way. The main properties generally employed for evaluating crudes' quality and behavior during refining were measured and used for calibration and testing of the PLS models. Among these, the UOP characterization factor K (K_UOP) used to classify crude oils in terms of composition, density (D), total acidity number (TAN), sulfur content (S), and true boiling point (TBP) distillation yields were investigated. Test set validation with an independent set of data was used to evaluate model performance on the basis of standard error of prediction (SEP) statistics. Model performances are particularly good for K_UOP factor, TAN, and TPB distillation yields, whose standard error of calibration and SEP values match the analytical method precision, while the results obtained for D and S are less accurate but still useful for predictions. Furthermore, a strategy that reduces spectral data preprocessing and sample preparation procedures has been adopted. The models developed with such an ample crude oil set demonstrate that this methodology can be applied with success to modern refining process requirements. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis and tentative structure elucidation of new anthocyanins in fruit peel of Vitis coignetiae Pulliat (meoru) using LC‐MS/MS: Contribution to the overall antioxidant activity

The skin of Vitis coignetiae Pulliat (meoru) grown wild in the Republic of Korea was analyzed for anthocyanins via HPLC coupled to ESI‐MS/MS in positive ion mode. Chromatographic separation was conducted via RP HPLC using a C₁₈ column, with a 50‐min gradient from 0 to 80% methanol in water containing 0.5% formic acid. A total of 18 anthocyanins were identified. Among them, nine compounds were newly determined by comparing the retention time (t_R) and mass fragmentation patterns with those of the previously reported anthocyanins for other grape varieties: malvidin hexose, peonidin 3‐galactoside, malvidin 3‐galactoside, cyanidin, petunidin, petunidin 3‐(6″‐coumaroyl)‐5‐diglucoside, peonidin, malvidin, and malvidin 3‐(6″‐coumaroyl)‐5‐diglucoside. The antioxidant activity of the V. coignetiae Pulliat anthocyanins was determined via 2,2‐diphenyl‐2‐picrylhydrazyl radical scavenging and 2,2′‐azinobis‐(3‐ethylbenzothiazoline‐6‐sulfonic acid) radical cation assays in a range of concentration from 25 to 500 mg/L. The capacity increased with concentration. The IC₅₀ values, defined as the concentration of sample required to scavenge 50% of free radicals, were calculated as follows: 189.63±11.31 mg/L and 141.29±6.70 mg/L for 2,2‐diphenyl‐2‐picrylhydrazyl and 2,2′‐azinobis‐(3‐ethylbenzothiazoline‐6‐sulfonic acid) radical cation, respectively. The antioxidant activity of the V. coignetiae Pulliat anthocyanins is substantially higher than that of ascorbic acid and is similar to the effects of the extracts obtained from other grape varieties.     

Improvement of residual bilinearization by particle swarm optimization for achieving the second‐order advantage with unfolded partial least‐squares

The combination of unfolded partial least‐squares (U‐PLS) with residual bilinearization (RBL) provides a second‐order multivariate calibration method capable of achieving the second‐order advantage. RBL is performed by varying the test sample scores in order to minimize the residues of a combined U‐PLS model for the calibrated components and a principal component model for the potential interferents. The sample scores are then employed to predict the analyte concentration, with regression coefficients taken from the calibration step. When the contribution of multiple potential interferents is severe, particle swarm optimization (PSO) helps in preventing RBL to be trapped by false minima, restoring its predictive ability and making it comparable to the standard parallel factor (PARAFAC) analysis. Both simulated and experimental systems are analyzed in order to show the potentiality of the new technique. Copyright © 2007 John Wiley & Sons, Ltd.     

近红外光谱测定人参与西洋参的主要皂甙总量

采用近红外光谱测定人参与西洋参的主要皂甙总量.采集人参与西洋参的漫反射光谱,分别对光谱进行正交信号校正(OSC)与常规预处理,建立了对应的偏最小二乘(PLS)回归模型.与常规最优预处理方法相比,OSC能很好地消除人参与西洋参的品种差异,显著提高了光谱与皂甙含量的相关系数,同时降低了PLS建模因子数,提高了模型的稳健性与...     

Exploration of linear multivariate calibration techniques to predict the total antioxidant capacity of green tea from chromatographic fingerprints

Nowadays fingerprinting is a generally applied technique for the identification and quality assessment of herbal products. In this study it was aimed to predict a quantitative property, the antioxidant capacity of green tea, from chromatographic fingerprints. Different linear multivariate calibration techniques, commonly applied on spectral data, were explored and compared. When the chromatograms were appropriately pretreated, all tested techniques were able to predict the total antioxidant capacity with a precision comparable to that of the reference method (Trolox equivalent antioxidant capacity assay). Stepwise multiple linear regression (MLR) however is less recommended because of inadequate variable selection. Principal components regression (PCR) also seems less preferable, because large variations not correlated with the total antioxidant capacity were also included in the model. This problem does not occur with partial least squares (PLS) models. Of all tested PLS methods, orthogonal projections to latent structures (O-PLS) was preferred because of its simplicity, reproducibility, good interpretability of the compounds' contribution to the antioxidant capacity and its good predictive and describing abilities.     

Prediction of total green tea antioxidant capacity from chromatograms by multivariate modeling

In this paper, a fast strategy for determining the total antioxidant capacity of Chinese green tea extracts is developed. This strategy includes the use of experimental techniques, such as fast high-performance liquid chromatography (HPLC) on monolithic columns and a spectrophotometric approach to determine the total antioxidant capacity of the extracts. To extract the chemically relevant information from the obtained data, chemometrical approaches are used. Among them there are correlation optimized warping (COW) to align the chromatograms, robust principal component analysis (robust PCA) to detect outliers, and partial least squares (PLS) and uninformative variable elimination partial least squares (UVE-PLS) to construct a reliable multivariate regression model to predict the total antioxidant capacity from the fast chromatograms.     

Sample classification for improved performance of PLS models applied to the quality control of deep-frying oils of different botanic origins analyzed using ATR-FTIR spectroscopy

The selection of an appropriate calibration set is a critical step in multivariate method development. In this work, the effect of using different calibration sets, based on a previous classification of unknown samples, on the partial least squares (PLS) regression model performance has been discussed. As an example, attenuated total reflection (ATR) mid-infrared spectra of deep-fried vegetable oil samples from three botanical origins (olive, sunflower, and corn oil), with increasing polymerized triacylglyceride (PTG) content induced by a deep-frying process were employed. The use of a one-class-classifier partial least squares-discriminant analysis (PLS-DA) and a rooted binary directed acyclic graph tree provided accurate oil classification. Oil samples fried without foodstuff could be classified correctly, independent of their PTG content. However, class separation of oil samples fried with foodstuff, was less evident. The combined use of double-cross model validation with permutation testing was used to validate the obtained PLS-DA classification models, confirming the results. To discuss the usefulness of the selection of an appropriate PLS calibration set, the PTG content was determined by calculating a PLS model based on the previously selected classes. In comparison to a PLS model calculated using a pooled calibration set containing samples from all classes, the root mean square error of prediction could be improved significantly using PLS models based on the selected calibration sets using PLS-DA, ranging between 1.06 and 2.91% (w/w).     

Regression with multiple regressor arrays

Extension of standard regression to the case of multiple regressor arrays is given via the Kronecker product. The method is illustrated using ordinary least squares regression (OLS) as well as the latent variable (LV) methods principal component regression (PCR) and partial least squares regression (PLS). Denoting the method applied to PLS as mrPLS, the latter was shown to explain as much or more variance for the first LV relative to the comparable L‐partial least squares regression (L‐PLS) model. The same relationship holds when mrPLS is compared to PLS or n‐way partial least squares (N‐PLS) and the response array is 2‐way or 3‐way, respectively, where the regressor array corresponding to the first mode of the response array is 2‐way and the second mode regressor array is an identity matrix. In a comparison with N‐PLS using fragrance data, mrPLS proved superior in a validation sense when model selection was used. Though the focus is on 2‐way regressor arrays, the method can be applied to n‐way regressors via N‐PLS. Copyright © 2007 John Wiley & Sons, Ltd.