Structure and redox properties of CexPr1−xO2−δ mixed oxides and their catalytic activities for CO, CH3OH and CH4 combustion

A series of Ce_xPr_1−xO_2−δ mixed oxides were synthesized by a sol–gel method and characterized by Raman, XRD and TPR techniques. The oxidation activity for CO, CH₃OH and CH₄ on these mixed oxides was investigated. When the value x was changed from 1.0 to 0.8, only a cubic phase CeO₂ was observed. The samples were greatly crystallized in the range of the value x from 0.99 to 0.80, which is due to the formation of solid solutions caused by the complete insertion of Pr into the CeO₂ crystal lattices. Raman bands at 465 and 1150 cm⁻¹ in Ce_xPr_1−xO_2−δ samples are attributed to the Raman active F_2g mode of CeO₂. The broad band at around 570 cm⁻¹ in the region of 0.3 ≤ x ≤ 0.99 can be linked to oxygen vacancies. The new band at 195 cm⁻¹ may be ascribed to the asymmetric vibration caused by the formation of oxygen vacancies. The TPR profile of Pr₆O₁₁ shows two reduction peaks and the reduction process is followed: . The reduction temperature of Ce_xPr_1−xO_2−δ mixed oxides is lower than those of Pr₆O₁₁ or CeO₂. TPR results indicate that Ce_xPr_1−xO_2−δ mixed oxides have higher redox properties because of the formation of Ce_xPr_1−xO_2−δ solid solutions. The presence of the oxygen vacancies favors CO and CH₃OH oxidation, while the activity of CH₄ oxidation is mostly related to reduction temperatures and redox properties.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

Preparation of dense, ultra-thin MIEC ceramic membranes by atmospheric spray-pyrolysis technique

Dense ceramic mixed ionic and electronic conducting membranes have been deposited by atmospheric spray-pyrolysis technique onto porous ceramic substrates. Perovskite oxide layers, i.e. manganites La_1−xSr_xMnO₃, ferrites La_1−xSr_xFe_1−y(Co,Ni)_yO₃, gallates La_1−xSr_xGa_1−y(Co,Ni,Fe)_yO₃, cobaltites La_1−xSr_xCoO₃ and related perovskites such as lanthanum nickelate La₂NiO₄ layers have been prepared. The structure, morphology and composition of the layers were characterised by XRD, SEM and WDS, respectively. Density and gas tightness of the layers were studied as a function of deposition process parameters, film thickness (from 0.5 to 3 μm) and preparation procedure. The presence of cracks and defects due to thermo-mechanical stresses applied during or after the preparation process were correlated with the membrane composition and the corresponding thermal expansion coefficient differences between substrates and membranes.     

Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2)

Since the discovery of superconductivity in Sr₂CuO₂F_2+δ there has been an increased interest in ternary oxide-fluorides. Sr₂CuO₂F_2+δ is prepared via low temperature (T = 220 °C) reaction routes. Low temperature fluorination induces an interesting structural rearrangement in the parent compound Sr₂CuO₃, which is a one-dimensional material containing linear chains of vertex sharing CuO₄ squares along the crystallographic b axis. Upon fluorination, one oxide is substituted by two fluorides and Cu²⁺ becomes octahedrally coordinated by four oxides and two fluorides. The fluorinated compound Sr₂CuO₂F_2+δ displays the T-type structure (La₂CuO₄). Insertion of excess fluorine, δ, also takes place and this fluorine occupies interstitial sites in the T structure. Although the starting material Ca₂CuO₃ is isostructural to Sr₂CuO₃, Ca₂CuO₂F_2+δ displays the T′ (Nd₂CuO₄) structure due to the smaller radius of Ca²⁺ compared to that of Sr²⁺.

The alkaline-earth palladates with the general formula A₂PdO₃ (A = Ba, Sr) are isostructural with the A₂CuO₃(A = Ca, Sr) materials. We prepared the Ba_2−xSr_xPdO₃ (x = 0–2) series and performed low temperature fluorination, which led to the synthesis of the series Ba_2−xSr_xPdO₂F_2+δ (0 ≤ x ≤ 1.5). All the compounds in the Ba_2−xSr_xPdO₂F_2+δ series show T′ structure (Ca₂CuO₂F_2+δ). Similarities and differences with Sr₂CuO₂F_2+δ and Ca₂CuO₂F_2+δ will be discussed.     

I NQR and spectroscopic investigation of impurity-doped and mixed lithium iodate Li1−xHxIO3 crystals

The ¹²⁷I NQR, IR absorption and Raman spectra of impurity-doped and mixed lithium iodate Li_1−xH_xIO₃ crystals grown from water solutions with different LiIO₃/HIO₃ ratios were investigated depending on the content of the impurity hydrogen x. The NQR results suggested that, at small concentration of doping iodic acid x<0.22, the lattice dynamics of the crystal grown from water solution changes significantly though the crystal retains hexagonal symmetry. Spectroscopic studies are compatible with average hexagonal symmetry of the grown doped crystals. From the results of Raman studies at room temperature and 100 K, the concentration range of hydrogen dopant 0.22<x<0.36 was found where disordered solid solution crystals Li_1−xH_xIO₃ are formed.     

Synthesis and thermochemical study of 1 : 2 : 4 phases in the (Y,Gd)–Ba–Cu–O system

Synthesis of the Y_xGd_1−xBa₂Cu₄O₈ phases (x=1; 0.5; 0.75) by special method from nitrates is described in this paper. Dissolution enthalpies of YBa₂Cu₄O₈, Y_0.5Gd_0.5Ba₂Cu₄O₈, Y_0.75Gd_0.25Ba₂Cu₄O₈, Y₂O₃, Gd₂O₃, CuO, BaCO₃ were measured in 6 N HCl at 323 K. On the basis of obtained experimental data, the enthalpies of some reactions with Y_xGd_1−xBa₂Cu₄O₈ were determined. It was established that the above-mentioned 1 : 2 : 4 superconductors were thermodynamically more favourable than mixtures including CuO, YBa₂Cu₃O_x. It was also established that, according to the obtained data, these phases can react with CO₂.     

Sub-solidus phase equilibria in CeO2–SrO system

In this communication, we report on the synthesis and characterization of a series of compounds with the general composition Ce_1−xSr_xO_2−x (0.0≤x≤1.0), to establish a detailed phase relation in the CeO₂–SrO system. The X-ray diffraction (XRD) pattern of the each product was refined to determine the solid solubility and the homogeneity range. The solid solubility limit of SrO in CeO₂ lattice, under the slow cooled conditions, is represented as Ce_0.91Sr_0.09O_1.91 (i.e. 9 mol% of SrO). A careful delineation of the phase boundary revealed that the stoichiometric SrCeO₃, in fact, contains a little amount of CeO₂ also. The mono-phasic compound could be obtained at the nominal composition Sr_0.55Ce_0.45O_1.45. The nominal composition Sr₂CeO₄, under the heat treatment used in the present investigation, was a bi-phasic mixture of SrCeO₃ and SrO. No new ordered phases were obtained in this system.     

Theoretical studies on the BN substituted fullerenes C70−2x(BN)x (x=1–3)—isoelectronic equivalents of C70

The equilibrium structures and relative stabilities of BN-doped fullerenes C_70−2x(BN)_x (x=1–3) have been studied at the AM1 and MNDO level. The most stable isomers of C_70−2x(BN)_x have been found out and their electronic properties have been predicted. The calculation results show that the BN substituted fullerenes C_70−2x(BN)_x have considerable stabilities, though they are less stable than their all carbon analog. For C₆₈BN, the isomers whose BN is located in the most chemically active bonds of C₇₀ (namely B and A) are among the most stable species, of which B is predicted to be the ground state. The stabilities of C₆₈BN decrease and the dipole moments increase with increasing the distance between the heteroatoms. For C₆₆(BN)₂, the lowest energy species is the isomer in which the B–N–B–N bond is formed; For C₆₄(BN)₃, the most stable species should have three BN units located in the same hexagon to form B–N–B–N–B–N ring. The ionization potentials and the affinity energies of the most stable species of BN-doped C₇₀ are almost the same as those of C₇₀ because of the isoelectronic relationship. The ionization potentials and affinity energies depend on the relative position of the heteroatoms in C₆₈BN, the chemical reactivities of the isomers whose heteroatoms are well separated should differ significantly from their all carbon analog.     

Thermodynamics of (1,4-difluorobenzene + an n-alkane) and of (hexafluorobenzene + an n-alkane)

Excess molar enthalpies H^E and excess molar volumes V^E have been measured, as a function of mole fraction x₁, at 298.15 K and atmospheric pressure for the five liquid mixtures (x₁1,4-C₆H₄F₂ + x₂n-C_lH_2l+2), l = 7, 8, 10, 12 and 16. In addition, H^E and excess molar heat capacities C_P^E at constant pressure have been determined for the two liquid mixtures (x₁C₆F₆ + x₂n-C_lH_2l+2), l = 7 and 14, at the same temperature and pressure. The instruments used were flow microcalorimeters of the Picker design (the H^E version was equipped with separators) and a vibrating-tube densimeter, respectively.

The excess enthalpies of the five difluorobenzene mixtures are all positive and quite large; they increase with increasing chain length l of the n-alkane from H^E(x₁ = 0.5)/(J mol⁻¹) = 1050 for l = 7 to 1359 for l = 16. The corresponding excess volumes V^E are all positive and also increase with increasing l: V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 0.650 for l = 7 and 1.080 for l = 16. Interestingly, the excess enthalphies of the corresponding mixtures with hexafluorobenzene are only about 5% larger, whereas the excess volumes of (x₁C₆F₆ + x₂n-C_lH_2l+2) are roughly twice as large as those of their counterparts in the series containing 1,4-C₆H₄F₂. Specifically, at 298.15 K H^E(x₁ = 0.5)/(J mol⁻¹) = 1119 for (x₁C₆F₆ + x₂n-C₇H₁₆) and 1324 for (x₁C₆F₆ + x₂n-C₁₄H₃₀), and for the same mixtures V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 1.882 and 2.093, respectively. The excess heat capacities for both systems are negative and of about the same magnitude as the excess heat capacities of mixtures of fluorobenzene with the same n-alkanes (Roux et al., 1984): C_P^E(x₁ = 0.5)/(J K⁻¹ mol⁻¹) = −1.18 for (x₁C₆F₆ + x₂n-C₇H₁₆), and −2.25 for (x₁C₆F₆ + x₂n-C₁₄H₃₀). The curve C_P^E vs. (x₁ for x₁C₆F₆ + x₂n-C₁₄H₃₀) shows a sort of “hump” for x₁ 0.5, which is presumed to indicate emerging W-shape composition dependence at lower temperatures.     

Phase equilibria and crystal structure of the solid solution LaFe1−xNixO3−δ (0 ≤ x ≤ 1)

Phase equilibria in the LaFeO₃–“LaNiO₃” were studied at 1100 °C in air. The samples were synthesized by standard ceramic and/or solution route via nitrate or citrate precursors. According to the results of XRD it was found that the homogeneity ranges of LaFe_1−xNi_xO_3−δ solid solution lay within 0.0 ≤ x ≤ 0.4 (sp.gr. Pbnm) and 0.6 ≤ x ≤ 0.8 (sp.gr. ). The structural parameters (bond lengths, atom coordinates) for the single-phase samples were refined using Rietveld analysis. The unit cell parameters versus LaFe_1−xNi_xO_3−δ composition are presented.     

Infrared spectra of phosphatidylethanolamine-cardiolipin binary system

We report on the infrared spectra of binary di-palmitoyl-phosphatidyl-ethanolamine-cardiolipin (DPPE_1−xCLP_x) monolayers and multilamellar vesicles as a function of CLP molar fraction x and temperature T. These data, which clearly show the presence of, at least, two kind of lipid domains with different thermodynamic stability and ordering of the lipid acyl chains, are consistent with similar domains observed in Langmuir–Blodgett films of the same binary system. Infrared results suggest the presence of lateral phase separation phenomena both in the bilayers and in the monolayers build up with this binary lipid mixture. These results further support the hypothesis that, within these structures, DPPE_1−xCLP_x molecules, for given values of x, are organized in a superlattice as shown by thermodynamic and AFM measurements.     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Preparation of epitaxial La0.6Ca0.4Mn1−xFexO3 (x = 0, 0.2) thin films: Variation of the oxygen content

Perovskite thin films with a nominal composition of La_0.6Ca_0.4Mn_1−xFe_xO₃ (x = 0, 0.2) were deposited by pulsed reactive crossed beam laser ablation. The film properties, such as electrical conductivity and magnetoresistance are studied as a function of the oxygen content and substrate type. The oxygen content of the thin films was determined by Rutherford Backscattering and controlled by varying the background gas pressure, pressure of the gas pulse and by using alternatively O₂ and N₂O as the gas pulse.

LaAlO₃ and SrTiO₃ were used as substrates at deposition temperature of 650 °C. The grown films were analyzed by X-ray diffraction in order to optimize the growth conditions, i.e. to obtain epitaxial thin films. Thin films doped with 20% Fe were grown under the same experimental conditions as the undoped LCMO films and the effect of the doping on the structural and transport properties of the thin films has been investigated.

The temperature of the metal–insulator transition was measured as a function of the oxygen content and substrate type.     

Positronium as a tool to monitor changes of chemical structure

The applicability of positron annihilation spectroscopy for chemical structural problems is demonstrated by two examples: For the swelling dynamics of an amphiphilic polymer network, very quick structural changes were indicated by positronium lifetime parameters at very low swelling ratios and a hydration mechanism was proposed accordingly. For the series [Fe_xZn_1−x(propyltetrazole)₆](BF₄)₂(x=1, 0.6, 0.4, 0.1, 0), changes in the dynamic structure were revealed by positronium lifetime spectroscopy. For compounds of x>0, temperature-induced spin-crossover was detected.     

Synthesis and physical chemical properties of Ca-substituted LaTiO2N

Oxynitrides with the general formula La_1−xCa_xTiO_2+xN_1−x (x = 0, 0.3, 0.5, 0.7, 1.0) were synthesized by thermal ammonolysis of oxide precursors produced with a soft chemistry method. The crystallographic structure, optical properties and the thermal stability of the compounds were studied with X-ray diffraction, UV–vis spectroscopy and thermal analysis.

All materials crystallize in perovskite-type pseudo-cubic unit cell. It was found that the lattice parameter decreases with increasing Ca content, while the optical band gap width increases with increasing x. Thermal reoxidation studies of the synthesized materials reveal the formation of nitrogen rich intermediates. The decomposition rate of the intermediates was correlated with the structure of the final products. TEM studies show a preferred insertion direction of the nitrogen into the crystal lattice of the starting oxides. Ammonolysis with flux significantly changed the microstructure of the obtained oxynitrides.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

Hydrogenation of non-activated alkenes catalysed by water-soluble ruthenium carbonyl clusters using a biphasic protocol

The use of the water soluble ruthenium clusters Ru₃(CO)_12−x(TPPTN)_x (x=1 1, 2 2 or 3 3) and H₄Ru₄(CO)₁₁(TPPTN) 4 (TPPTN=P{m-C₆H₄SO₃Na)₃) as catalyst precursors in the hydrogenation of non-activated alkenes under biphasic conditions is described. Each cluster displays activity under moderate conditions, ca. 60 atm. H₂ at 60°C, with catalytic turnovers up to ca. 500. The trinuclear clusters undergo transformation during reaction but can be reused repeatedly without loss of activity. Other methodologies such as ionic liquid–organic and the use of silica supports have been attempted with these clusters but they are less effective than the aqueous–organic regime.     

End unit effect on the Tg of differentiated series of perfluoro-poly (oxymethylene-co-oxyethylene) oligomers

Twelve series of linear oligomers of four different degrees of polymerization (x_n = 8.77−41.55), having a common perfluorinated random copolymeric chain as molecular body and two equal foreign end units of one of the types listed in Table 1, have been synthesized by derivatization of base samples of one of them having a diolic---CH₂OH functionality. The glass transition temperature T_g of all the series was measured and thus examined as a function of x_n. A clear end unit effect is observed, dominantly determined in every series by chemical nature and structure of the end units, quantitatively expressed at any x_n by different positive or negative T_g deviations from the common asymptotic T_g∞ value. The results are also discussed in terms of copolymer end effect and of relation between T_g and end copolymeric composition.     

Spectroscopic and structural analysis of Ca substituted La orthoferrite

Samples of orthoferrites La_1−xCa_xFeO₃ (0.15≤x≤0.45) were synthesized by double sintering ceramic technique. X-ray diffraction and infrared spectroscopy experiments were carried out and discussed for the investigated samples. The data showed the formation of single-phase orthorhombic structure of space group Pbnm. The FTIR spectra were performed in the region (1200–200 cm⁻¹). Four main absorption bands were present with some side bands and shoulders in the range (1200–400 cm⁻¹). Another four bands were appeared in the range (400–200 cm⁻¹). The positions, intensities and values of the absorptions bands vary depending on the Ca content in the samples. The first absorption band appeared at about 920 cm⁻¹ was assigned to the La–O stretching vibration.     

Ligand deprotonation significance in the formation of the molybdate ion-malic acid complexes

Using the temperature jump technique, the study of the kinetics of the complexing of oxomolybdate anion with malic acid has been carried out in aqueous solutions of pH 7.15–8.5 at ionic strength 0.1 M (KNO₃) and 25°'C. A reaction scheme for the formation of 1 : 1 complexes is proposed which accounts for the observed relaxation rates.

The significance of the ligand deprotonation on the complexation reaction of MoO₄²⁻ by a single protonated ligand, i.e. MoO₄²⁻+LH^nk→MoO₃(OH)Lⁿ⁻², (where n = 1 -, 2 -, etc), is analysed on the basis of a simple model. A linear correlation between the log k and the pK of the monoprotonated ligand (LH) is found for this reaction when the global process is controlled by the proton transfer from the ligand to an oxogroup, i.e. log k = a - 0.5xpK. It is found that this correlation is satisfied by MoO₄²⁻ and WO₄²⁻. The experimental slopes for these oxyanions are −0.503 and −0.543 respectively, in agreement with the predictions.