[5]Ferrocenophane based ligands for stereoselective Rh-catalyzed hydrogenation and Cu-catalyzed Michael addition

A series of homochiral [5]ferrocenophane based N/P, N/S, N/Se, Se/P and P/P ligands was prepared from (R)-N,N-dimethylamino[5]ferrocenophane. These ligands were tested in the Rh-catalyzed hydrogenation of dimethyl itaconate and in Cu-catalyzed Michael addition of Et₂Zn to cyclohex-2-enone. The best results in terms of conversion and enantioselectivity in the Rh-catalyzed hydrogenation provided bis(diphenylphosphine) ligand 2h (100% conversion and 95% ee) and aminophosphine 2a in the Cu-catalyzed conjugate addition (100% conversion 84% ee). The enantioselectivity of the Rh-catalyzed hydrogenation of methyl 2-acetamidoacrylate was lower (41% ee).     

Asymmetric synthesis of chiral Roche ester and its derivatives via Rh-catalyzed enantioselective hydrogenation with chiral phosphine-phosphoramidite ligands

Methyl 3-hydroxy-2-methylpropionate, known as the Roche ester, was prepared with high enantioselectivity (up to 96.7% ee) via the Rh-catalyzed asymmetric hydrogenation of methyl 2-hydroxymethylacrylate with a chiral 1,2,3,4-tetrahydro-1-naphthylamine-derived phosphine-phosphoramidite ligand (THNAPhos 5a) even at a low catalyst loading (0.1 mol %). An investigation on the substrate scope revealed that the ester group present in the substrate has a significant effect on the enantioselectivity, and the substrate with the bulkier ester group tended to give lower enantioselectivity.     

Catalytic asymmetric hydrogenation of indoles using a rhodium complex with a chiral bisphosphine ligand PhTRAP

Highly enantioselective hydrogenation of N-protected indoles was successfully developed by use of the rhodium catalyst generated in situ from [Rh(nbd)₂]SbF₆ and the chiral bisphosphine PhTRAP, which can form a trans-chelate complex with a transition metal atom. The PhTRAP–rhodium catalyst required a base (e.g., Cs₂CO₃) for the achievement of high enantioselectivity. Various 2-substituted N-acetylindoles were converted into the corresponding chiral indolines with up to 95% ee. The hydrogenations of 3-substituted N-tosylindoles yielded indolines possessing a stereogenic center at the 3-position with high enantiomeric excesses (up to 98% ee).     

Highly enantioselective hydrogenation of alpha-dehydroamino esters and itaconates with triphosphorous bidentate ligands and the unprecedented solvent effect thereof

An X-ray diffraction experiment revealed an interesting triphosphorous bidentate coordination in a Pd(II) complex of a phosphine-phosphoramidite ligand 1, which showed excellent enantioselectivity (up to 99.4% ee) in Rh-catalyzed hydrogenation of alpha-dehydroamino esters in acetone. A dramatic solvent effect was found in the hydrogenation of itaconates, which induces opposite chiralities of the product with the same catalytic system by the use of different solvents (e.g., 99.6% ee (R) in TFE vs 71.2% ee (S) in methyl ethyl ketone).     

Highly enantioselective bioreduction of ethyl 3-oxohexanoate

Seven wild-type microorganism strains were used to reduce ethyl 3-oxohexanoate to ethyl (R)-3-hydroxyhexanoate. Free cells of Kluyveromyces marxianus and Aspergillus niger led to higher than 99% of conversion with higher than 99% ee. After immobilization in calcium alginate spheres, cells of K. marxianus exhibited high enantioselectivity (>99% ee) and conversion level (99%) within 24 h even if substrate was added at concentration of 10 g/L (62 mM).     

Polymeric salen-Ti(IV) or V(V) complex catalyzed asymmetric synthesis of O-acetylcyanohydrins from KCN, Ac2O and aldehydes

Polymeric salen-Ti(IV) and V(V) complexes were employed in the enantioselective O-acetyl cyanation of aldehydes with potassium cyanide and acetic anhydride. The crosslinked polymeric salen-Ti(IV) catalyst exhibited good activities and enantioselectivities, up to 91% ee with 99% conversion was obtained at −20 °C with 1 mol% of catalyst (based on bimetallic catalytic unit). Moreover, six consecutive recyclings with the easily recovered crosslinked polymeric catalyst showed no obvious decrease in either activity or enantioselectivity. Linear polymeric salen-V(V) catalyst showed good catalytic efficiency too, up to 94% ee with 99% conversion was obtained at −42 °C with 5 mol% of catalyst.     

Synthesis of enantiopure (R)-2-(4-methoxy-3-(3-methoxypropoxy)-benzyl)-3-methylbutanoic acid—a key intermediate for the preparation of Aliskiren

The enantioselective hydrogenation of (E)-2-(4-methoxy-3-(3-methoxypropoxy)-benzylidene)-3-methylbutanoic acid (1) to (R)-2-(4-methoxy-3-(3-methoxypropoxy)-benzyl)-3-methylbutanoic acid (2)—a key intermediate in the synthesis of the pharmacologically important renin inhibitor Aliskiren—is described. The stereochemistry of the catalytic transformation has been studied using a number of homogeneous chiral Rh(I) and Ru(II) complexes bearing ferrocene-based phosphine ligands. The highest enantioselectivity for the homogeneous hydrogenation of 1 (up to 95% ee) was achieved with a [Rh(NBD)₂]BF₄ pre-catalyst (substrate/catalyst ratio 100:1, 10 bar H₂, 40 °C, in MeOH). To bring the enantioselectivity to perfection an effective method for the isolation of the enantiopure carboxylic acid is suggested likewise.     

苯乙胺衍生的手性膦-亚磷酰胺酯配体在Rh-催化a-烯醇酯膦酸酯的不对称氢化反应中的应用

将苯乙胺衍生的手性膦-亚磷酰胺酯配体应用在Rh-催化α-烯醇酯膦酸酯的不对称氢化反应中,考察了配体结构及反应条件对反应结果的影响,并在优化的条件下研究了各种底物的适用范围,产物的对映选择性最高>99%ee.     

Highly enantioselective catalytic hydrogenation of a 5-amino-3,5-dioxopentanoic ester

The highly enantioselective hydrogenation of methyl 4-tert-butylcarbamoyl-3-oxo-butyrate to the corresponding secondary alcohol, representing an interesting chiral building block, for example, for the synthesis of statins, has been investigated in the presence of homogeneous chiral Rh(I) and Ru(II) complexes bearing phosphine ligands. The highest enantioselectivity (up to 96%) was achieved with a [Ru((R)-BINAP)(p-cymene)Cl]Cl complex (sub./cat. ratio 100:1, 5 bar H₂, rt, MeOH).     

Synthesis of a water-soluble cationic chiral diamine ligand bearing a diguanidinium and application in asymmetric transfer hydrogenation

A novel water-soluble cationic N-monosulfonated chiral diamine ligand diguanidinium 1c was easily prepared from (R,R)-DPEN and its rhodium complex and was successfully applied in the asymmetric transfer hydrogenation of prochiral ketones and imines in water by using sodium formate and formic acid as co-hydrogen donors. Various substrates were reduced with high yields and good to excellent enantioselectivities (up to >99% ee).     

New chiral diphosphoramidite rhodium(I) complexes for asymmetric hydrogenation

Chiral 1,5‐cyclooctadiene rhodium(I) cationic complexes with C₂‐symmetric chelate diphosphoramidite ligands containing (R,R)‐1,2‐diaminocyclohexane as the backbone and two atropoisomeric biaryl units were easily synthesized and fully characterized by multinuclear one‐ and two‐dimensional NMR spectroscopy and elemental analysis. These complexes were used as catalysts in the asymmetric hydrogenation of dimethyl itaconate, methyl 2‐acetamidoacrylate and (Z)‐methyl‐2‐acetamido‐3‐phenylacrylate. The rhodium complexes derived from diphosphoramidite ligands that contain two (R) or (S) BINOL (2,2′‐dihydroxy‐1,1′‐binaphthyl) units proved to be efficient catalysts, giving complete conversion and very good enantioselectivity (up to 88% ee). An uncommon positive H₂ pressure effect on the enantioselectivity was observed in the hydrogenation of dimethyl itaconate catalyzed by Rh‐complex with diphosphoramidite ligand that contains two (S)‐binaphthol moieties. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly enantioselective asymmetric hydrogenation of beta-acetamido dehydroamino acid derivatives using a three-hindered quadrant rhodium catalyst

[reaction: see text] A previously reported three-hindered quadrant chiral ligand and its corresponding rhodium complex provide high enantioselectivity for the asymmetric hydrogenation of beta-acetamido dehydroamino acid substrates. Both (E)- and (Z)-substrates are hydrogenated with high enantioselectivity in all of the reported examples. Asymmetric hydrogenation of a cyclic beta-acetamido dehydroamino acid substrate in 85% ee is also reported.     

Asymmetric enamide hydrogenation in the synthesis of N-acetylcolchinol: a key intermediate for ZD6126

A synthesis of N-acetylcolchinol, a key intermediate in the synthesis of ZD6126, was developed. The enantiodifferentiating step required the catalytic asymmetric hydrogenation of an enamide. After screening a range of metal and ligand combinations it was found that (S,S)-ⁱPr-FerroTANE Ru(methallyl)₂ and [(S,S)-^tBuFerroTANE Rh(COD)]BF₄ gave both high enantioselectivity (>90% ee) and high catalyst utility (molar S/C = 1000).     

Study of incidence of DiPAMP ligand modification on the rhodium(I)-catalyzed asymmetric hydrogenation of α-acetamidostyrene

A series of P-stereogenic enantiopure 1,2-bis[(aryl)(phenyl)phosphino]ethane ligands was prepared through an extensive systematic incorporation of various substituents onto the P-o-anisyl rings of Knowles’ DiPAMP (DiPAMP = 1,2-bis[(o-anisyl)(phenyl)phosphino]ethane). The study of incidence of such modification on the Rh(I)-catalyzed hydrogenation of α-acetamidostyrene is reported revealing that substitution on position 3 is detrimental, while it is beneficial on position 5. Namely, a 2.5-fold increased catalyst activity coupled with a higher enantioselectivity (90% ee) was attained with the P-(2-MeO-3-naphthyl)-substituted ligand under mild conditions (1 bar H₂, rt in MeOH).     

Rh(I) complexes with new C2‐symmetric chiral diphosphoramidite ligands: Catalytic activity for asymmetric hydrogenation of olefins

The design and synthesis of three new C ₂‐symmetric chiral diphosphoramidite ligands starting from simple and cheap building blocks have been developed. Rhodium(I) cationic complexes bearing these chelate ligands have been prepared and applied in asymmetric hydrogenation of model olefins. A rhodium complex with a diphosphoramidite containing a chiral diamine configurationally stable and two fluxional chiral biphenyl units gave higher enantioselectivity with increasing hydrogen pressure (87% ee) in the hydrogenation of dimethyl itaconate.     

DPAMPP in catalytic asymmetric reactions: enantioselective synthesis of l-homophenylalanine

l-Homophenylalanine 1, a key intermediate of most commercially important ACE inhibitors, was prepared via catalytic asymmetric hydrogenation of (Z)-2-acetamido-4-phenylcrotonate 3a with a cationic rhodium complex of (1R,2S)-DPAMPP, followed by acid-hydrolysis of the protecting groups in good yield with >99.9% enantioselectivity.     

Achiral β-amino alcohols as efficient ligands for the ruthenium-catalysed asymmetric transfer hydrogenation of sulfinylimines

Some achiral β-amino alcohols have been shown as efficient ligands for the ruthenium-catalysed asymmetric transfer hydrogenation of N-(tert-butylsulfinyl)imines in isopropanol. The ruthenium complex prepared from [RuCl₂(p-cymene)]₂ (2.5 mol %) and 2-amino-2-methyl-1-propanol (5 mol %) leads to α-branched chiral primary amines with very high optical purities (up to 98% ee) by the diastereoselective reduction of the imines followed by removal of the sulfinyl group under mild acidic conditions. Short reaction times (2-3 h) were needed to complete the reduction reactions when they were performed at 50 °C.     

Enantioselective hydrogenation of functionalized olefins catalyzed by Rh-chiral bidentatephosphite complexes

A novel catalytic system for the hydrogenation of dimethyl itaconate has been developed by using rhodium–diphosphite complexes. These chiral diphosphite ligands were derived from glucopyranoside, d-mannitol derivatives, and binaphthyl or H₈-binaphthyl phosphochloridites. The ligands based on the methyl 3,6-anhydro-α-d-glucopyranoside backbone and (R)- and (S)-binaphthol and/or (R)- and (S)-2,2′-dihydroxy-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthol gave almost complete conversion of the dimethyl itaconate and both enantiomers of dimethyl 2-methylsuccinate with excellent enantioselectivities. The stereochemically matched combination of methyl 3,6-anhydro-α-d-glucopyranoside and H₈-(S)-binaphthyl in ligand 2,4-bis{[(S)-1,1′-H₈-binaphthyl-2,2′-diyl]-phosphite} methyl 3,6-anhydro-α-d-glucopyranoside was essential to afford dimethyl 2-methylsuccinate with up to 98% ee. The sense of the enantioselectivity of products was predominantly determined by the configuration of the biaryl moieties of the ligands. An initial screening of [Rh(cod)₂]BF₄ with these ligands in the hydrogenation of (E)-2-(3-butoxy-4-methoxybenzylidene)-3-methylbutanoic acid was carried out. Good enantioselectivity (75% ee) and low yield for (R)-2-(3-butoxy-4-methoxybenzyl)-3-methylbutanoic acid were obtained.     

Asymmetric hydrogenation of enol phosphinates catalyzed by a chiral ferrocenylphosphine-rhodium complex. Asymmetric synthesis of optically active secondary alkyl alcohols

Catalytic asymmetric synthesis of secondary alkyl alcohols (up to 78% ee) was accomplished by asymmetric hydrogenation of enol diphenylphosphinates, derived from prochiral ketones such as acetophenone, 3-methyl-2-butanone, and 2-octanone, in the presence of a cationic rhodium complex of (R)-1-[(C)-1′,2-bis(diphenylphosphino)ferrocenyl]ethanol (BPPFOH).     

Flame atomic absorption spectrometry for the determination of trace amount of rhodium after separation and preconcentration onto modified multiwalled carbon nanotubes as a new solid sorbent

The present article reports on the application of modified multiwalled carbon nanotubes (MMWCNTs) as a new, easily prepared and stable solid sorbent for the preconcentration of trace rhodium ion in aqueous solution. Rhodium ions were complexed with 1-(2-pyridylazo)-2-naphthol (PAN) in the pH range of 3.2-4.7 and then the formed Rh-PAN complex was adsorbed on the oxidized MWCNTs. The adsorbed complex was eluted from MWCNTs sorbent with 5.0 mL of N,N-dimethylformamide (DMF). The rhodium in eluted solution was determined by flame atomic absorption spectrometry (FAAS). Linear range for the determination of rhodium was maintained between 0.16 ng mL⁻¹ and 25.0 μg mL⁻¹ in initial solution. Relative standard deviation for the 10 replicated determination of 4.0 μg mL⁻¹ of rhodium was ±0.97%. Detection limit was 0.010 ng mL⁻¹ in initial solution (3S_bl, n = 10) and preconcentration factor was 120. Sensitivity for 1% absorbance of rhodium (III) was 0.112 μg mL⁻¹. The sorption capacity of oxidized MWCNTs for Rh (III) was 6.6 mg g⁻¹. The effects of the experimental parameters, including the sample pH, flow rates of sample and eluent solution, eluent type, breakthrough volume and interference ions were studied for the preconcentration of Rh³⁺. The proposed method was successfully applied to the extraction and determination of rhodium in different samples.