POLYMERIZATION OF OCTAFLUOROCYCLOBUTANE IN GLOW DISCHARGE Ⅱ. ESCA AND IR CHARACTERIZATION OF POLYMER STRUCTURE*

In a capacitively coupled discharge with external electrodes, He, H_2, N_2 or Ar were used as plasmagas, polymerization of octafluorocyclobutane was carried out under different conditions by varyingdischarge power, pressure, plasma gas and plasma-gas/monomer ratio. Structure of polymerizedproducts was characterized by IR spectroscopy and ESCA measurement. It was found that therewere six elements in the products, i.e. C, F, Si, O, N and H. The probably existed groups in poly-mers wer investigated. By analyzing the resolved peaks of C_(1S) region in ESCA spectra, effect of thereaction conditions on degree of branching of the polymerized products and the relationship of thepolymer structure wth the mechanism of the competitive ablation and polymerization process werestudied. In addition, polymer deposition process occurring in glow discharge was discussed.     

Polymerization of acrylonitrile initiated by ceric ion–citric acid redox system

Heterogeneous polymerization of acrylonitrile initiated by ceric ammonium sulfate–citric acid (C.A.) redox system is reported at 35 ± 0.2°C under nitrogen atmosphere. The rate of monomer disappearance is found to be proportional to [C.A.]⁰, [Ce⁴⁺]^0.63, and [Monomer]^1.59. The rate of ceric ion disappearance is directly proportional to ceric ion concentration but independent of monomer concentration. The initial rate was independent of [H₂SO₄]. The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreasing ceric ion concentration. Activation energy was found to be 27.9 kJ/mol.     

The base-catalyzed transformation of polyacrylonitrile

In an effort to produce high-molecular-weight, linear ladder polymer by linking the nitrile groups within the molecule of polyacrylonitrile, polyacrylonitrile homopolymers were heat treated in N,N-dimethylformamide and N,N-dimethylacetamide solutions, in the presence of tertiary alkylamine catalysts. The products were soluble in formic acid, had relatively low molecular weight, and could be cast into brittle films. The infrared spectra indicated that the polymerization of the nitrile groups is initiated by a self-initiation mechanism based on the active methine groups in polyacrylonitrile, as proposed by Grassie and Hay, and that the reaction is complicated by molecular weight degradation via reverse Michael addition, as proposed by Hamada and Takahashi. The inherent viscosities of the products increase with increasing catalyst concentration, and further increases can be achieved by the addition of anionic chain coinitiators of phenolic nature. Density measurements indicated that the ladder structures undergo rearrangement into a more stereoregular form after formation, and that some aromatization occurs when the reaction is carried out in the presence of air.     

Analysis of plasma polymerization of allylamine by FTIR

The plasma polymerization of allylamine in an inductively coupled rf plasma reactor is analyzed by Fourier transform infrared spectroscopy. Comparison of the infrared spectra of the as-received monomer and the plasma polymerized film reveals a conversion of the primary amine in the monomer (? CH₂? NH₂) to an imine (? CH?NH) and a nitrile (C?N). Plasma polymerization of ethylenediamine yields the same results, suggesting that this polymerization scheme may be typical of primary amines. Increasing the plasma power seems to increase the proportion of nitrile groups in relation to the imine groups. The infrared spectra of the vapor phase polymerized monomer was similar to that of the substrate-grafted allylamine film implying a similar structure. Aging of this vapor phase polymer at 120°C for 1 h in vacuum and at 295°C for 15 min in an oxygen free environment reveals nitrile group reaction similar to that observed in polyacrylonitrile. Thermogravimetric analyses of the vapor phase polymers in a nitrogen atmosphere at 20°C/min demonstrated the thermal stability, with the polymer produced at a plasma power level of 50 W retaining 20% of its weight at 1000°C. This was better than the stability shown by the polymer produced at 150 W and is attributed to the ease of nitrile group polymerization in the former.     

Distribution of polymer deposition in plasma polymerization. I. Acetylene,ethylene, and the effect of carrier gas

Factors which influence the distribution of polymer deposition in an electrodeless glow-discharge system were investigated for acetylene and ethylene. Under the conditions in which “full glow” is maintained, the distribution of polymer deposition from pure monomer flow systems is nearly independent of flow rate of monomer or of the system pressure in discharge, but is largely determined by the characteristic (absolute) polymerization rates (not deposition rate) of the monomers. Acetylene has a high tendency to deposit polymer near the monomer inlet, whereas ethylene deposits polymer more uniformly in wider areas in the reactor. The addition of carrier gas such as argon or partially copolymerizing gas such as N₂, H₂, and CCl₂F₂ was found to narrow the distribution of polymer deposition. The distribution of polymer deposition is also influenced by a glow characteristic which is dependent on flow rate and discharge power.     

Thermal properties of N-substituted 4-vinylpyridinium ions and their polymers

4-Vinylpyridinium trifluoromethanesulfonate monomers substituted at nitrogen with H, O, CH₃, C₂H₅, C₆H₁₃, and C₁₂H₂₅ were synthesized and characterized spectroscopically. Thermal analyses (DSC and TGA) were carried out on all the compounds. The solid monomers (N? H, N? CH₃, N? C₆H₁₃, and N? C₁₂H₂₅) exhibited endothermic melting followed by exothermic polymerization and exothermic decomposition (>400°C). Liquid N? C₂H₅ monomer revealed only exothermic polymerization and decomposition. The N? O polymer underwent thermal decomposition below 300°C. The N–C₁₂H₂₅ homopolymer, prepared from monomer in the DSC or in bulk, displayed an unusual thermal transition at 250°C, which has been attributed to a polymer backbone reorientation leading to side-chain ordering of the dodecyl groups.     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Stepwise thermal degradation of a polybenzimidazole foam

The stepwise thermal degradation of a polybenzimidazole (PBI) foam, prepared from 3,3′-diaminobenzidine and isophthaldiamide, has been studied under conditions of pyrolysis and nonflaming oxidative degradation in a thermal analyzer using gas and liquid chromatographic separation and mass spectrometric and infrared detection techniques. The recoveries of sample weight, as degradation products, were quantitative over the entire temperature ranges studied (100–300, 300–570, 570–700, and 700–1000°C for pyrolysis; and 100–570 and 570–900°C for nonflaming oxidation). In pyrolysis, 17 volatile compounds were identified with NH₃ and CH₄ accounting for 94 and 57 mole % of the total mass loss between 300–570 and 570–700°C, respectively. Above 700°C, HCN and H₂ were formed from degradation of arylnitrile-containing oligomers. The thermal and oxidative degradation of three substituted benzimidazole monomers was also studied, and the relative ratios of N₂, NH₃, and HCN that were produced from each, when compared with PBI, support a mechanism for degradation that favors cleavages that least alter the conjugation of the polymer backbone. In the presence of air, PBI formed stable oxygen-containing residues that decomposed at high temperatures to N₂, CO₂, and H₂O almost exclusively. Large quantities of H₂ and N₂ from model compounds support results from PBI that suggest that degradation begins with total erosion of the imide ring at 570°C and the formation of more condensed heterocyclic species. These quantitative techniques are generally applicable to the study of all polymeric materials.     

Anionic polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole

The polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole by an anionic mechanism has been demonstrated. Polymerization reactions were monitored by ultraviolet/visible spectroscopy and λ_max and ε values for the propagating carbanions determined. The 2-vinyl monomer exhibits all the features of a standard “living” polymer; the carbanion is stable at ambient temperatures and high molecular weight, M?_n ? 10⁶, narrow distribution polymers and block copolymers with styrene have been prepared. The carbanion from the 3-vinyl monomer is much less stable and a clean polymerization can only be conducted at temperatures below -60°C. A comparison of the anionic polymerization characteristics of the N-, 2-, and 3-vinyl carbazole monomer series is presented.     

Thermal and radiation-induced polymerizations of N-tert-butylacrylamide and (N-tert-butylacrylamide)2–ZnCl2 complex

The thermal and radiation-induced in-source and postirradiation polymerizations of N-tert-butylacrylamide and (N-tert-butylacrylamide)₂–ZnCl₂ complex of this monomer were studied at various temperatures. In in-source, solid-state polymerizations of monomer and complex the conversion was about 95% at 21°C in about eight days. Their postirradiation polymerizations were also studied in solid state. The conversion-time curves of these two systems show an autoacceleration as in-source polymerization. In both types of polymerization the overall rate of polymerization of complex was higher than that of pure monomer at the same polymerization temperature. In investigations of the thermal polymerization of N-tert-butylacrylamide and ZnCl₂-complex it was observed that the ZnCl₂-complex system can be polymerized in air in the molten and solid state. The conversion of monomer to polymer reaches limiting values in solid state in about 1 hr. The thermal polymerization of ZnCl₂-complex in the molten state was also studied and 100% conversion was obtained in 30 min. The thermal polymerization of pure monomer was studied in vacuum and an appreciable amount of polymer was obtained in the molten state; however, the thermal polymerization of this monomer is negligible in solid state. In this work rates of polymerization for N-tert-butylacrylamide and (N-tert-butylacrylamide)₂–ZnCl₂ are compared under various experimental conditions and overall activation energies are calculated.     

Kinetics of polymerization of N,N-methylenebisacrylamide initiated by KMnO4-H2C2O4 redox system

A kinetic study of the gel free polymerization of the divinyl monomer N,N′-methylenebisacrylamide has been made using permanganate-oxalic acid system as redox initiator; R_p is proportional to [monomer]², [KMnO₄] and [H₂C₂O₄]⁰. A cyclopolymerization mechanism is proposed. A complex between monomer and Mn³⁺ participates, in addition to the complex [Mn(HC₂O₄)₂]⁺.     

Electrochemical and chemical polymerization of acrylamide

The electrochemical and chemical polymerization of acrylamide (AA) has been studied. The electrolysis of the monomer in N,N-dimethylformamide (DMF) containing (C₄H₉)₄NClO₄ as the supporting electrolyte leads to polymer formation in both anode and cathode compartments. The cathodic polymer dissolves in the reaction mixture and the anodic polymer precipitates during the course of polymerization. A plausible mechanism for the anodic and cathodic initiation reaction has been given. The chemical polymerization of acrylamide that has been initiated by HClO₄ is analogous to its anodic polymerization. The polymer yield increases with an increase in concentration of the monomer and HClO₄. Raising the reaction temperature also enhances the polymerization rate. The overall apparent activation energy of the polymerization was determined to be ca. 19 kcal/mole. The copolymerization of acrylamide was carried out with methyl methacrylate (MMA) in a solution of HClO₄ in DMF. The reactivity ratios are r₁ (AA) = 0.25 and r₂ = 2.50. The polymerization with HClO₄ appears to be by a free radical mechanism. When the polymerization of acrylamide is carried out with HClO₄ in H₂O, a crosslinked water-insoluble gel formation takes place.     

Pyrolysis and TG Analysis of Shivee Ovoo Coal from Mongolia

The coal sample of the Shivee Ovoo deposits has been non-isothermally pyrolysed in a thermogravimetric analyser to determine the influence of temperature, heating rate and purge gas employed on the thermal degradation of the sample. The heating rates investigated in the TG were 10–50 K min^–1 to final temperature of 1000°C. N₂or CO₂ were employed as well as type of purge gas on the process of thermal degradation of the coal sample. The coal was also investigated in a fixed bed reactor to determine the influence of temperature and heating rate of the pyrolysis on the yield of products and composition of the gases evolved. The main gases produced were H₂, CH₄, C₂H₂, C₂H₄, C₂H₆, C₃H₆ and C₃H₈ and also minor concentrations of other gases. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cationic polymerizations of 2‐alkyloxazolines catalyzed by bismuth salts

Acidic bismuth salts, such as BiCl₃, BiBr₃, BiJ₃, and Bi‐triflate catalyzed the ring‐opening polymerization of 2‐methoxazoline (MOZ) in bulk at 100 °C, whereas less acidic salts such as Bi₂O₃ or Bi(III)acetate did not. Bi‐triflate‐catalyzed polymerizations of 2‐ethyloxazoline (EtOZ) were performed with variation of the monomer–catalyst ratio (M/C). It was found that the molecular weights were independent of the M/C ratio. The formation of cationic chain ends and the absence of cycles was proven by reactions of virgin polymerization products with N,N‐dimethyl‐4‐aminopyridine or triphenylphosphine. The resulting polymers having modified cationic chain ends were characterized by ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The polymerization mechanism including chain‐transfer reactions is discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4777–4784, 2008     

Synthesis of zwitterionic polymer by SET‐LRP at room temperature in aqueous

The Cu⁰‐mediated single electron transfer‐living radical polymerization of acrylamide and N,N‐dimethyl‐N‐methacryloyloxyethyl‐N‐sulfobutyl ammonium in aqueous at 25 °C using 2‐chloropropionamide as initiator with Cu⁰ powder/tris‐(2‐dimethylamino ethyl)amine (Me₆‐TREN) as catalyst system is studied. The results showed the characteristic of the “living” polymerization that were the M_n of polymers increased linearly with monomer conversion and the ln([M]₀/[M]) increased linearly with time too, meanwhile the narrow molecular of weight distributions were found at most cases. Because of the high rate constant of propagation and bimolecular termination of the acrylamide, the external addition of CuCl₂ is required to mediate deactivation the early stage of polymerization. In addition, the disproportionation constant of Cu^IX/L in H₂O is higher than in other solvents and the coordination of amino group and Cu^II takes place easily, so the isopropanol or N,N‐dimethylformamide is added to control the polymerization. High conversions were achieved within short time and the polymers prepared showed good antipolyelectrolyte properties in inorganic salts solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization of Cyclooctene in Benzene Initiated with a Metathesis Catalyst

Cyclooctene was polymerized in benzene at temperatures ranging from 10 to 80°C. The polymerization was initiated with the metathesis catalyst WCl₆/C₂H₅)AlCl₂/C₂H₅OH for initial monomer concentrations varying from 0.11 to 4.0 mol/L. Polymerization products obtained from the metathesis reaction and the alkylation of benzene were found. The metathesis products consisted of a high molecular weight polymer and cyclic oligomers of cyclooctene. The double bond content was the same as in the monomer. The alkylation products were characterized by the presence of an aromatic nucleus and a low double bond content. Benzene was found to react with the double bond of cyclooctene and the cyclic dimer. It may also lead to the formation of saturated oligomer consisting of short chains of cyclooctyl units. Their presence is not temperature dependent and increases with decreasing initial monomer concentrations. For initial monomer concentrations above 1.0 mol/L, the alkylation reaction cannot be detected.     

Addition homo- and copolymerization of 3-triethoxysilyltricyclo[4.2.1.0<Superscript>2,5</Superscript>]non-7-ene

New norbornene type monomer bearing reactive triethoxysilyl group was synthesized, and its addition homo- and copolymerization with 3-trimethylsilyltricyclonon-7-ene was studied. The target monomer was obtained using regio- and stereospecific [2σ+2σ+2π] cyclo-addition of quadricyclane with vinyltrichlorosilane followed by the reaction of the formed cycloadduct with ethanol in the presence of triethylamine. Addition polymerization was investigated over the three-component Pd-containing catalytic system (Pd complex, Na+[B(3,5-(CF₃)₂C₆H₃)₄]–(cocatalyst) and tricyclohexylphosphine). The N-heterocyclic carbene Pd complex (SIPrPd(cinn)Cl) with high activity and tolerance to the Si—O—C moieties was used as a catalyst. The yields of the homo- and copolymers were 24—68% depending on the monomer (comonomer): Pd: B: PCy₃ ratio. The obtained addition polymers are high-molecular-weight amorphous products, the glass transition temperature of which exceeds 300 °C. The presence of reactive Si(OC₂H₅)₃ groups in the homo- and copolymers made it possible to carry out a hard-to-realize cross-linking involving side substituents and followed by the formation of insoluble polymers.     

A kind of novel nonmetallocene catalysts for ethylene polymerization

A kind of novel bridged nonmetallocene catalysts was synthesized by the treatment of N,N‐imidazole and N,N‐phenylimidazole with n‐BuLi, and MCl₄ (M = Ti, Zr) in THF. Those catalysts were performed for ethylene polymerization after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M ratio, pressure of monomer, and concentration of catalysts on ethylene polymerization behaviors were investigated in detail. Those results revealed that the catalyst system was favorable for ethylene polymerization with high catalytic activity. The polymer was characterized by ¹³C NMR, WAXD, GPC, and DSC. The result confirmed that the obtained polyethylene featured broad molecular weight distribution around 20, linear structure, and relative low melting temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 33–37, 2008     

Cryopolymerization of N,N-dimethylacrylamide in moderately frozen formamide

The free-radical polymerization of N,N-dimethylacrylamide initiated by the redox pair ammonium persulfate-N,N,N??,N??-tetramethylethylenediamine in moderately frozen and liquid formamides is studied at temperatures 10?C30°C below or above the temperature of crystallization (2.9°C) of the pure solvent at various monomer concentrations in the initial solution. When polymerization is conducted at temperatures below the temperature of crystallization of formamide, the frozen systems, as is evident from their phase diagrams, include the crystallized main bulk of the solvent and the noncrystallizing monomer concentrated in the unfrozen liquid microphase where the reaction occurs. It is found that, in the case of this cryopolymerization variant, the temperature dependences of the yield of the polymer and its viscosity-average molecular mass show an extremum pattern and the positions of maximum points relative to the temperature scale depend on the initial monomer concentration. It is shown that the molecular masses of cryopolymerization products are much higher and their molecular-mass distribution is wider than that of poly(N,N-dimethylacrylamide) samples synthesized through solution polymerization (above the temperature of crystallization of formamide) at the same concentration of the monomer.     

Plasma polymerization of some organic compounds and properties of the polymers

Plasma polymerizations (under 13.5-MHz radiofrequency inductively coupled glow discharge) of some organic compounds are investigated by their properties (elemental analysis, surface energy, and infrared spectra) and their relations to the concentrations of free radicals in the polymers as detected by electron spin resonance (ESR) spectroscopy. Monomers that have been investigated are hexamethyldisiloxane, tetrafluoroethylene, acetylene, acetylene/N₂, acetylene/H₂O, acetylene/N₂/H₂O, allene, allene/N₂, allene/H₂O, allene/N₂/H₂O, ethylene, ethylene/N₂, ethylene oxide, propylamine, allylamine, propionitrile, and acrylonitrile. Plasma-polymerized polymers generally contain oxygen, even if the starting monomers do not contain oxygen. This oxygen incorporation is related to the free-radical concentration in the polymer. Molecular nitrogen copolymerizes with other organic monomers such as acetylene, allene, and ethylene, and their properties are very similar to those of plasma-polymerized polymers from nitrogen-containing compounds such as amines and nitriles. The addition of water to the monomer mixture reduces in a dramatic manner the concentration of free radicals in the polymer and consequently the oxygen-incorporation after the polymer is exposed to air. The concentrations of free radicals (by ESR) are directly correlated to the change of the properties of plasma-polymerized polymers with time of exposure to the atmosphere. These changes are primarily the introduction of carbonyl (and possibly hydroxyl) groups. The addition of water to the plasma introduces these groups during the polymerization.